EDIT: Finally I've pasted the solution from user cerato a few lines below. Thnx all!
Don't know if it's only my unit, but the volume is pretty low in max lvl in comparison with my old hd2.
Is there a way to boost the maximum volume?
thnx in advance!
Edit: aditional info by cerato, thanks!
Here's the trick folks. Really
======================
Increase Speaker Volume
•Enter the phone dialer
•##634#, tap Call.
•Enter code: *#0002*28346# or *#0002*28345#
•Tap: Get, under the Device Gain (max/min)
•First Box: 7
•Second Box: change to 16000
•Third Box set to 0
•Tap: Set
•Be sure that audience.cfg is set to on
•Tap: Start
•Tap: Home
•Restart your phone.
•After reboot, enter the same menu and just tab get to verify the settings
Increase Headphone Volume
Note: Make sure your headphones are plugged in first
•Enter the phone dialer
•##634#, tap Call
•Enter code: *#0002*28346# or *#0002*28345#
•Tap: Get under the Device Gain (max/min)
•For "device gain" leave number 5, set 1100 (max) and -1100 (low)
•Tap: Set
•Verify that AUDIENCE.CFG is ON
•Tap: Start
•Tap Home
•Restart your phone.
•After reboot, enter the same menu and just tab get to verify the settings
Enjoy
I agree it needs a boost. Maybe someone knows a way to boost it in the dev settings?
##634# TAPE CALL
in diagnosis mode tape *#0002*28345#
clik read
in system gain 7 put 10 clik get
in class gain 7 put 10 clik get
in device gain 7 put 10 clik get
start et stop"
how can i revert this change? it's too loud and it changed the volume level from the whole system.
is there a way to change only the front speaker volume lvl?
the rear speaker volume and the one from the headphones are definitely okay and loud enough...
pls help
Interesting, the same code (*#0002*28346#) doesn't work on my UK Tmobile Omnia 7 :S
*#0002*28346# worked not for me ( German 16GB T-Mobile ) but *#0002*28345# does bring up an sound tuning screen
thnx it worked!
*#0002*28346# didnt work for me either but *#0002*28345# gave me sound tuner.
is this the same menu as *#0002*28346# is for others.
I discovered somthing amazing for anyone who cant turn off shutter noise on their phones: go to the audio tuner and press write to set all values to 0. the camera now dosnt make a sound ... only problem is nothing else does either so dont do it!!!
would anybody be so kind as to go to the audio tuner and press the read button at the top and give me all the values so that my phone can work again??
Thankyou!!
nikd1 said:
would anybody be so kind as to go to the audio tuner and press the read button at the top and give me all the values so that my phone can work again??
Click to expand...
Click to collapse
1 1d 7d c2 22 5f 5f 12
skycamefalling said:
1 1d 7d c2 22 5f 5f 12
Click to expand...
Click to collapse
didnt work think i might be hard resetting!
anyone have any ideas on this?
managed to fix it and camera shutter now mutes when on 0 volume!! that makes me v. happy!
was quite worried I had wiped the settings for my main speaker but have managed to get them back by pressing every button 20 times over!
be careful if you try it yourself
EDIT: actualy the main speaker only works 50% of the time and I havnt yet worked out when and why it changes
if anyone knows anything i could try please let me know!
anonym-er said:
how can i revert this change? it's too loud and it changed the volume level from the whole system.
is there a way to change only the front speaker volume lvl?
the rear speaker volume and the one from the headphones are definitely okay and loud enough...
pls help
Click to expand...
Click to collapse
I would like to know if this is possible too.
During a phone call, raising or lowering the volume seems to have no effect at all on front speaker. Can you notice any difference?
How can we adjust the volume during a phone call?
Can we do smth about the volume of the microphone? People tell me that they don't hear me very well...
hey is there any way to make the headphones volume louder ??? cause this one only turns speaker volume up, if there is any way to do it please let me know its highly needed
new here, yeah my sumsung is a bit low on the headphone.. please help.. as i don't understand how those turning tip in above post work
i followed the instructions, but the volume remains de same!
has this happened to anyone?
my Omnia 7 has a poor volume during calls... in crowded places it's hard to ear the other person in call...
An overall problem seems to be the max volume during calls(Confirmed by colleagues as well...). The rest like games,music,... is really on a different Level when on max...
Seems to be, there is a chance to mess things up a little bit with the posted codes...
So, can we boost the volume for calls only ? I really dont want to affect the other volume settings...
thanks
Hey guys, i dont know what happened but now i only have 2 volume options. That is the volume at 0 or max volume. for eg, if i use the rocker to vol. lvl 0, it is muted like it should, but from vol. lvl 1 - 30 (or whatever max is) the vol. lvl is the same and is amazingly loud. and doesnt change
EDIT: a simple reboot fixed the problem. Thank god cause as i was trying to fix this, i felt as if the speakers were dying
actually I have the opposite situation, I find the volume, even at 1/30, too loud.
Playing with those settings sometimes produces changes sometimes not...
Screenshots anyone?
Can anyone post a screenshot of the original settings in the sound diagnostic screen? I would like to reset the phone back to the original settings.
A reboot of the phone does not restore the orginial settings.
Related
Hi all a simple (or maybe not..) question
I am trying to find a way to set up my ringtone level but there is no such thing. can adjust the sound level alright but my ringtone will still sound very loud.
Does anybody know how to do this? I cant find anything like that.
Being able to set up a profile for example would be very nice like in the simple phones.
Thank you in advance.
Makis
Two things that might help...
First, try the Settings > Sounds and Notifications>NOtifications>Incoming call and see if setting the tone to "Increasing ring" is good enough for you.
If not, then set it at ring only, and then in the today screen, move the hardware volume key (left upper corner) and adjust to your desired level.
That's the only thing that can help.
cheers.
krale thank you.
I dont know if I understood you correctly but it is working (I think) now.
If you click on the sound icon on the top right then you get 2 volume adjustment lines one for the device and one for the volume of speaker when you are in a call (or at least thats what I thought i did till now). well the right one actually adjusts also the ringtone volume.
Thanks for all the help. Now I my colleagues can go back to sleep with out me waking them up everytime I receive a call.
Morning XDA people
Have one slight issue that really bugs me with my HD2 the ring volume is so damn loud its hazardous lol now I know your gonna say turn it down but when listening to music I have to turn it back up again and then forget to turn it down again....
Any way I can separate the volumes better was literally thinking of taking the wav file for my ring and decreasing the DB its saved with, but slightly longer work around than wanted not ideal!...
Many Thanks in advance,
Crafty...
I used the following registry tweak to lower the call volume, and it's worked great for me on the old ROM and latest ROM. However, I've posted this a couple of times now and it's received a mixed reception. Some say it doesn't work at all, and some say that a second incoming call is way too quiet. You can give it a shot a guess, and if it doesn't work just change your registry back.
HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2" in both inCall and inCall2
snerkler said:
I used the following registry tweak to lower the call volume, and it's worked great for me on the old ROM and latest ROM. However, I've posted this a couple of times now and it's received a mixed reception. Some say it doesn't work at all, and some say that a second incoming call is way too quiet. You can give it a shot a guess, and if it doesn't work just change your registry back.
HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2" in both inCall and inCall2
Click to expand...
Click to collapse
Many Thanks for the Reply Snerkler, I don't think I explained my issue that clearly it is actually the ringing volume that really gets me rather than in call volume. I use my headphones and turn the volume up to max and then when removing the head phones if I forget to turn the phone down the ringer is crazy loud.
Hope this is clearer
There are 3 volumes in WM phone. Incall, ring, and system.
Incall volume is highly problematic in HD2, but at least it has nothing to do with the other two. It can only be changed during call.
The other two, ringer and system, are both linked by default. But that can be easily changed by settings/sound & display/single volume - off.
Like that you will be able to control both volumes independently. On my phone that meant that you control ringer only with HW keys. That can be changed to system only, check here:
http://forum.xda-developers.com/showthread.php?t=610334
but for some people no such tweak is needed.
But again .. there is special incall volume which can be changed only during call. So no volume setting before the call, ringer or system, affects incall volume.
1) how do I turn off that damn touchtone sound when I type in a phone number?
2) how can I lower the volume of the call? having it all the way down to zero still is "loud" and everyone can hear the otherside of the conversation. Is there some admin panel or something like the samsung omnia where I enter a combination of keys and it will allow me to adjust volume or something?
1) - settings menu all settings personal phone change keypad setting.
what about the volume of conversations? its soooo loud. volume is all the way to zero and still it makes no difference!
I want to mention this problem though i know it has been questioned previously with no answer.
When during a call you raise the bluetooth headset volume then the phone doesnt remember the setting and you have to raise the volume after the next call and again and again.
Very annoying!!Also raising the bt headset volume then the volume control opens and the ringer sound is raised too and i need to lower it after each call!!
Any solution on this?
Thanks!!
solved it
[HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides]
"SavedInCallVolume"=dword:FFFFFF
This key seems to save the in call volume.
Set to FFFFFF for maximum in call bt headset volume.SOFT RESET.
Works for me, now in each call the bluetooth in call voice is set to max and i dont have to raise it any more.
When for any reason the volume goes down again, click the volume button in the earphone, just to stimulate it, set your prefferred settings for ring volume etc and then soft reset and the high earphone volume is back.
It is not a complete solution, of course, but it is better than having to raise and low the volumes after each call.
Up to now there is not a better solution to this problem.
If someone knows a better registry setting or tip solution he can post it.
Another problem also is that sometimes the last call button is accidentally pushed in the bluetooth earphone and the last call is activated.
I will try to find the setting that disables last call through bluetooth if there is any.
has anyone else tried this? I have this problem with the t-mous version of the hd2.
NIKOSXRI said:
[HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides]
"SavedInCallVolume"=dword:FFFFFF
This key seems to save the in call volume.
Set to FFFFFF for maximum in call bt headset volume.SOFT RESET.
Works for me, now in each call the bluetooth in call voice is set to max and i dont have to raise it any more.
Click to expand...
Click to collapse
if this works you are a life saver I have had this problem for over 3 months now with no answer I will give it a try and answer back!
edit: it works!!!
I've just tried this, and get the following error:
Error : System.FormatException: FormatException at System.Number.ParseUInt32() at System.UInt32.Parse() at RegeditService.RegeditResponse.Send() at httpserv.Services.Service.sendResponse() at RegeditService.RegeditService.Exec() at httpserv.HttpServerWorker.run()
Any ideas?
i entered the value as dec...with total commander you can change in hex also
with this cab that I found here you can restore the original wm sound manager and the HD2 'remembers' the sound volume and keeps it at the highest level even with a bt headset!
NIKOSXRI said:
If someone knows a better registry setting or tip solution he can post it.
Click to expand...
Click to collapse
I know it has been sometime to post in this thread, but I have found a work around.
Go to the market and download and instal the app 'Volume Locker' - its free. Make sure you do not activate it until you adjust the 'in-call bluetooth volume' level to a comfortable level (i usually call me wife, and then adjust the level while on the phone with her). Then before you end the call, go into the app 'Volume Locker' and activate it. Make sure you uncheck the box 'Allow Apps To Override'.
Now, everytime you call out using your bluetooth headset - it will remember your 'in-call bluetooth volume' setting.
I hope this works!
lawalty said:
I know it has been sometime to post in this thread, but I have found a work around.
Go to the market and download and instal the app 'Volume Locker' - its free. Make sure you do not activate it until you adjust the 'in-call bluetooth volume' level to a comfortable level (i usually call me wife, and then adjust the level while on the phone with her). Then before you end the call, go into the app 'Volume Locker' and activate it. Make sure you uncheck the box 'Allow Apps To Override'.
Now, everytime you call out using your bluetooth headset - it will remember your 'in-call bluetooth volume' setting.
I hope this works!
Click to expand...
Click to collapse
There is no "in call volume" setting in volume locker. Which box did you check in order to activate the in call volume?
Hi Folks, I noticed today my GT speaker in call volume gets low. Volume levels are set at max. I check the music, videoplayback and media volume and all is ok. The only problem is calling.
Thinking it was after I used a Samsung WEP450 Bluetooth to make calls. I just don't used it today and noticed this.
Mine is a T-mobile USA GT, running ROTO JMEv4 Firmware. Anyone else with this situation?
Can anyone post the dial code (*#@@@@@@#) to get the service menu that lets you change the default volumes?
I just fixed it. I called my self via the GT and Up the volume at the highest level. Then Down two levels and the In Call Volume from the Speaker get fixed. Woot Woot!
I don't know what could be happening. If I Up it to the highest turn lower. But It's fixed by Now... again, Woot Woot!
rangercaptain said:
Can anyone post the dial code (*#@@@@@@#) to get the service menu that lets you change the default volumes?
Click to expand...
Click to collapse
speaker in call volume hack = (*#*#197328640#*#*) I'm not sure what values change there. But this is the service menu!
Enter that code into your dialer and the service menu opens. Tap [5]Audio [1]Handset [1] Volume I changed all the volumes to 92.
rangercaptain said:
Enter that code into your dialer and the service menu opens. Tap [5]Audio [1]Handset [1] Volume I changed all the volumes to 92.
Click to expand...
Click to collapse
When you say "all" you mean to row #3 SRC I2S1 RX Volume and #4 DST Speech TX Volume?
If so I do that and doesn't fix the problem. I just maintain using my original fix. I don't know what happened! I had a friend with the same trouble and I give to him mi FIX and he fixed it. Well "fix" in quotes...!!!
But by now I can say Woot Woot!
any reason why 92 is the max and not 100?
I have a Verizon Tab "no phone" How do I get to service mode
Changing the in call volume in the service menu does nothing. Also, if you reboot your changes do not get saved.
Woop Woop!
Just called myself and set the volume to 2 down from highest and it now sounds a lot louder!!
Thank you!
ps This wasn't the case when I had the stock Samsung firmware.. sounded fine then.. It only started when I started all this custom-romming-schtomming.. maybe its a kernel thing? I'm on modaco at the moment.
natious said:
any reason why 92 is the max and not 100?
Click to expand...
Click to collapse
You are correct - 100 is the max. I never go max on volume (crackles, distortion, etc.).
There are several volume adjustments, just look around in all the menus. Reboot when you are done experimenting.
09CarreraS said:
Changing the in call volume in the service menu does nothing. Also, if you reboot your changes do not get saved.
Click to expand...
Click to collapse
I must be getting a placebo. Or standing too close to a few explosions did damage.
Go Audio > Speaker > diamond solution and there is also a setting there for Voice Booster.
raaleck said:
I just fixed it. I called my self via the GT and Up the volume at the highest level. Then Down two levels and the In Call Volume from the Speaker get fixed. Woot Woot!
I don't know what could be happening. If I Up it to the highest turn lower. But It's fixed by Now... again, Woot Woot!
Click to expand...
Click to collapse
I had this problem too. since the overclock Rom. but now because of this works well now. but may be the key volume still bugged.. lets wait till the update. Tried sound Boost and vodoo those things doesnt work. hehehe. thank you very much sir for the share!!
dudechongpare said:
I had this problem too. since the overclock Rom. but now because of this works well now. but may be the key volume still bugged.. lets wait till the update. Tried sound Boost and vodoo those things doesnt work. hehehe. thank you very much sir for the share!!
Click to expand...
Click to collapse
You welcome! Thanks for sharing your situation by this way other folks can work out this on the same direction. I will appreciate if you hit some thanks to me! Enjoy your GT!