As the title says, I'd like to connect to memory SD cards at the same time to the device.
I've read spec pages, and it seems the device supports two SD's at once (moreover, the SANDISK wifi+memory SD wouldnt work otherwise).
However, I'm not sure how WM OS supports two memory cards at once. how do the cards mount (how does it work on the dell x50 which has both sd and CF for example) one card mounts to /storage card , and the other ?
also, any ideas about the pinouts ? an SD card/SDIO have 9 pins, but if I'd like to connect more then one, do I connect both to the same pins ?
I currently have a 8 gb micro sd card (class 2) and I was wondering whether I would really see a difference in the speed of my phone access programs installed to the micro sd card if I upgraded to a 8 gb (class 6) microsd card?
Inside the phone, not much of a difference, since the limiting factor is the phone and not the card. But when you connect the microSD card to your computer (through the USB cable or using a reader), class 6 will allow you to transfer files to/from the card much faster.
Hi, when I long press the home button and choose Task manager->Storage, I see System storage (out of 1.97GB), USB storage (out of 11.07GB) and SD card (out of 14.83GB). The SD card is probably my sandisk 16GB sd card. What about USB storage? I suppose the System storage is the internal memory. Also, from an end user point of view, is the new SanDisk Extreme Pro as fast as the internal memory? Is it worth to buy it? Thanks.
The phone is manufactured with 16 GB of flash on it.
2 GB for the ROM
2 GB for apps
The rest (11.07 GB) as general storage
Then it has a MicroSD slot where you can add more storage.
The speed of the internal storage should be good, but I don't know how it is compared to a Sandisk extreme pro card.
I asked SanDisk. They said that they do not know if the Extreme Pro is compatible with the Galaxy Note. They told me to ask Samsung. Of course, Samsung is going to point back to SanDisk.
Like many of you, I have several SD cards I locked by trying them in my Focus. The only way to unlock them was to reformat them using a Symbian device, which is one of the few OSes that sees the card. W7 does not even see the cards.
Well I recently bought an HP Envy X2 which has both a MicroSD and standard SDXC card slots. When inserted into the MicroSD slot, W8 DOES see the card! I was unable to get disk properties or to reformat it, but it is visible. Strangely, if inserted into the SDXC slot with an adapter, the card is not seen at all.
In any event, now that we can see the card, how do I mount it and reformat? Is there any type of utility that can unlock the cards?
daniel_leavitt2000 said:
Like many of you, I have several SD cards I locked by trying them in my Focus. The only way to unlock them was to reformat them using a Symbian device, which is one of the few OSes that sees the card. W7 does not even see the cards.
Well I recently bought an HP Envy X2 which has both a MicroSD and standard SDXC card slots. When inserted into the MicroSD slot, W8 DOES see the card! I was unable to get disk properties or to reformat it, but it is visible. Strangely, if inserted into the SDXC slot with an adapter, the card is not seen at all.
In any event, now that we can see the card, how do I mount it and reformat? Is there any type of utility that can unlock the cards?
Click to expand...
Click to collapse
There is a Storage Lock app that XDA devs have written and it comes pre-installed with many WP7.8 ROMs. I locked an SD as well and was able to unlock it without a Symbian phone. That card now works great in my wife's Note II.
I have some questions to pose regarding the Sandisk Ultra 64GB Class 10 microSDXC.
I bought it about a month ago, and when i first put it into my Samsung Galaxy S4 GT-I9505, it didn't read anywhere near 64GB. Hence, i formatted the new microSD with Samsung's format option, and it showed 59.48GB. Worked perfectly from there.
However, i find the default file system of the microSD card really slow in transferring files when i connect my phone to the PC via USB, with the microSD mounted on my phone. I have a Kingston microSD reader, so i used it to connect my microSD to the PC, and tried to wipe and format it to FAT32. After doing so, the storage size became like 27GB. Is there a way to make my microSD running FAT32 system and get it to work on both my PC and phone without any problems with the size?
Anyway, i formatted the microSD again with Samsung's format option, and it went back to normal 59.48GB. However, i used my microSD reader to connect it to the PC, and it couldn't read the microSD card. It prompts me to format it. Is it because my microSD reader does not work with microSDHX cards? Or is it because my Windows PC cannot read the microSD's file system?
Hope someone has an answer, thanks.
P.S I posted this as a reply to an old thread, but realised it was in the Galaxy S3 forum, so i figured i'll post it here.
So you could use the memory card in your card reader after formatting the card as FAT32?
What OS are you running on your PC? If it's Windows XP, support for exFAT needs to be added. You can find more on this here: http://support.microsoft.com/kb/955704
Same problem here.samsung micro sdhc 64gb card with windows 7 and 8.my computer only recognises my card after formating on windows and the storage size goes down to only 30.5 GB.any solution?
Sent from my GT-I9500 using Xparent Cyan Tapatalk 2
paradise220 said:
Same problem here.samsung micro sdhc 64gb card with windows 7 and 8.my computer only recognises my card after formating on windows and the storage size goes down to only 30.5 GB.any solution?
Sent from my GT-I9500 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Format it as ExFat from PC link ...
paradise220 said:
Same problem here.samsung micro sdhc 64gb card with windows 7 and 8.my computer only recognises my card after formating on windows and the storage size goes down to only 30.5 GB.any solution?
Sent from my GT-I9500 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
Make a low level format.
utilities for that can be found on google..
worktorest said:
I have some questions to pose regarding the Sandisk Ultra 64GB Class 10 microSDXC.
I bought it about a month ago, and when i first put it into my Samsung Galaxy S4 GT-I9505, it didn't read anywhere near 64GB. Hence, i formatted the new microSD with Samsung's format option, and it showed 59.48GB. Worked perfectly from there.
However, i find the default file system of the microSD card really slow in transferring files when i connect my phone to the PC via USB, with the microSD mounted on my phone. I have a Kingston microSD reader, so i used it to connect my microSD to the PC, and tried to wipe and format it to FAT32. After doing so, the storage size became like 27GB. Is there a way to make my microSD running FAT32 system and get it to work on both my PC and phone without any problems with the size?
Anyway, i formatted the microSD again with Samsung's format option, and it went back to normal 59.48GB. However, i used my microSD reader to connect it to the PC, and it couldn't read the microSD card. It prompts me to format it. Is it because my microSD reader does not work with microSDHX cards? Or is it because my Windows PC cannot read the microSD's file system?
Hope someone has an answer, thanks.
P.S I posted this as a reply to an old thread, but realised it was in the Galaxy S3 forum, so i figured i'll post it here.
Click to expand...
Click to collapse
use a program such as H2testw to see if your microsd card is fake or defective . You can get it from here or google it .
paradise220 said:
Same problem here.samsung micro sdhc 64gb card with windows 7 and 8.my computer only recognises my card after formating on windows and the storage size goes down to only 30.5 GB.any solution?
Sent from my GT-I9500 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
I found the solution. The Kingston USB reader that i used is actually not compatible with my Sandisk MicroSDXC. That's the reason it couldn't read my microSD when i connected it to the PC. I used the SD card adapter that came with the microSD on a newer laptop which has the port, and it read my card perfectly.
Anyway, i ended up putting my microSD back to my phone and formatting it using the Samsung option. Then, i used a program to format the microSD to FAT32, which i don't think is actually necessary as there wasn't any reading/writing speed difference when it came to transferring files.
Cheers.
Micro SDHC 64GB 10 Series
I wonder if someone can help me.
I purchased a Micro SDHC 64GB 10 Series memory card on Ebay - Brand new.
When I opened the packaging, the card first asked me to format the card fr use. At first, The SDHC card worked fine.
But now when I attempt to use it via laptop, The SDHC card doesn't show up on "My Computer"
It's like the card isn't reading at all..
Any suggestions?
Thanks in advance
Using Official Windows 8
Using Multi-Card Reader - SDHC support
CaptainPorkie23 said:
I wonder if someone can help me.
I purchased a Micro SDHC 64GB 10 Series memory card on Ebay - Brand new.
When I opened the packaging, the card first asked me to format the card fr use. At first, The SDHC card worked fine.
But now when I attempt to use it via laptop, The SDHC card doesn't show up on "My Computer"
It's like the card isn't reading at all..
Any suggestions?
Thanks in advance
Using Official Windows 8
Using Multi-Card Reader - SDHC support
Click to expand...
Click to collapse
I've been playing with Windows since Android's grandfather was a tadpole, so in a combination of research and personal expertise I present the following advice...
DO NOT install a SD of a Class other than what is listed in our phone's Hardware Compatibility List - they being a Class 10 MicroSD, MicroSDHC and MicroSDXC - beyond that of 32GB, as you're only looking for trouble. Sometimes bigger is not necessarily better - just ask the people who knew the man that ate himself to death. NAND technologies are getting better by the day, but unfortunately devices grow increasingly incompatible with newer variants of MicroSD's simply because of the changes made within the firmware of the NAND controller. By changing Class outside of the scope of our phone's capability, problems can arise. Kind of like having a PC and trying to use a SATA-M drive on it. Unless you've got the physical hardware and device drivers installed, you can't expect it to work properly, same as throwing a SATA3 drive on a SATA2 port and expecting it to transfer data at over 3Gbps. If you find you are so desperate that you just can't do without having a 64GB card installed, go to eBay and grab yourself a Genuine Samsung 64GB 'Evo' Class 10 MicroSDXC. They are the fastest and highest capacity MicroSD our device will be friendly with (due to NAND controller compatibility) and at the moment they're going for good prices. Once you get it, Format the thing on your phone first, according to Samsung's instructions for installing the card. You'll then have a bit less than 60GB of storage space, along with Samsung backup if something does go wrong, simply because you're running a Samsung card in a Samsung phone. Trust me, its a great combination, proven by the fact my Samsung laptop runs like a dream on the Samsung 840Pro series SSD it has in it's belly...
djshotty said:
I've been playing with Windows since Android's grandfather was a tadpole, so in a combination of research and personal expertise I present the following advice...
DO NOT install a SD of a Class other than what is listed in our phone's Hardware Compatibility List - they being a Class 10 MicroSD, MicroSDHC and MicroSDXC - beyond that of 32GB, as you're only looking for trouble. Sometimes bigger is not necessarily better - just ask the people who knew the man that ate himself to death. NAND technologies are getting better by the day, but unfortunately devices grow increasingly incompatible with newer variants of MicroSD's simply because of the changes made within the firmware of the NAND controller. By changing Class outside of the scope of our phone's capability, problems can arise. Kind of like having a PC and trying to use a SATA-M drive on it. Unless you've got the physical hardware and device drivers installed, you can't expect it to work properly, same as throwing a SATA3 drive on a SATA2 port and expecting it to transfer data at over 3Gbps. If you find you are so desperate that you just can't do without having a 64GB card installed, go to eBay and grab yourself a Genuine Samsung 64GB 'Evo' Class 10 MicroSDXC. They are the fastest and highest capacity MicroSD our device will be friendly with (due to NAND controller compatibility) and at the moment they're going for good prices. Once you get it, Format the thing on your phone first, according to Samsung's instructions for installing the card. You'll then have a bit less than 60GB of storage space, along with Samsung backup if something does go wrong, simply because you're running a Samsung card in a Samsung phone. Trust me, its a great combination, proven by the fact my Samsung laptop runs like a dream on the Samsung 840Pro series SSD it has in it's belly...
Click to expand...
Click to collapse
Good advice but I guess I'm just glad my 64gb card has been serving me well. [emoji41]