Related
I'm having some awful slow-down issues with my N1. Like, 3 second delays between clicking widgets and their intended effect, and even longer switching between home screens (if the screens switch at all).
There's no auto task-killer enabled, I've very recently wiped and re-installed CM, and cleaned out my unused apps. I've got around 200MB of RAM free, constantly. SetCPU is keeping my processor at 461MHz or higher. This is obnoxious as balls, and I can't think of much. :s
Any suggestions?
I'm running CM 5.0.6, btw.
i have the same problem
My N1 is not rooted and I am experiencing slowdowns. When opening txt messages now take 3-5 seconds, and typing completely locks sometimes for 20 seconds. Gmail now takes 5+sec to open and other apps are also seeing this. I just had 10+ programs update themselves and all these issues started appearing suddenly. Also when exiting apps my desktop will be blank for 3-5 seconds. This just happened all within the past 2 weeks or so.
reddragon72 said:
This just happened all within the past 2 weeks or so.
Click to expand...
Click to collapse
Yeah, the issue is very recent for me too. Last week.
I am wondering if Google sent out an OTA that is prepping the phone for the 2.2 update??? The reason I say this and not point to an app is the simple fact that I have all my apps stopped completely and the issues still exist.
reddragon72 said:
I am wondering if Google sent out an OTA that is prepping the phone for the 2.2 update??? The reason I say this and not point to an app is the simple fact that I have all my apps stopped completely and the issues still exist.
Click to expand...
Click to collapse
Mmm, I dunno about that. I'm running CyanogenMod. I don't get OTA updates. Do you remember, recently, getting an OTA?
Unless it was pushed inside of a market-updated Google app (uhh.. No.), I wouldn't have got it.
Zak Jones! said:
SetCPU is keeping my processor at 461MHz or higher.
Click to expand...
Click to collapse
You set your CPU at 461Mhz?? Sure it slow down and lagging. What the point buying a 1Ghz processor phone decide let it run at 461Mhz?
Check the profile if you are not set at 461Mhz, maybe accidently make a profile setting and enable.
Or set your setCPU setting from on demand to on performance.
What kernel are you running?
Andrewtst said:
You set your CPU at 461Mhz?? Sure it slow down and lagging. What the point buying a 1Ghz processor phone decide let it run at 461Mhz?
Check the profile if you are not set at 461Mhz, maybe accidently make a profile setting and enable.
Or set your setCPU setting from on demand to on performance.
Click to expand...
Click to collapse
I think he's setting the minimum at 461 hence the "or higher" part.
Well, I can't actually help much except to suggest that perhaps you could try Kang-o-rama (see my sig) and see if that works. It's a stable and fast bundle with no apparent lag. At least I know that setup works.
If you did proceed then posted your results in that thread I might be able to assist. You shouldn't be experiencing lag with this phone... and if you still are after installing Kang-o-rama we could look at logs for you.
No promises but I know Kang-o-rama works...
Success? Sorry for the laggy reply.
JCopernicus said:
I think he's setting the minimum at 461 hence the "or higher" part.
Click to expand...
Click to collapse
Yeah, Copernicus is right, it's at a minimum of 461MHz (now 499MHz.), with a max of 998MHz, running 'on demand'.
antoniouslj said:
What kernel are you running?
Click to expand...
Click to collapse
I'm using whichever kernel comes with CM. (2.6.33.2 is specified in the relevant section of his changelog.)
djmcnz said:
Well, I can't actually help much except to suggest that perhaps you could try Kang-o-rama.
Click to expand...
Click to collapse
Yeah, won't lie, I'm sick of reinstalling all my stuff, so I don't want to do it again. If I keep having issues, I'll look into it though.
Just last night, I wiped both the data partition (factory reset?) and cleared the Dalvik(sp?)-cache. Started from scratch (without Google settings sync.), and reinstalled apps one by one. SO FAR, I haven't had the slowdown, but who knows. All I've got installed yet are the applications that I actually had desktop shortcuts to. (I didn't have very many more, but these are the ones I actually used frequently.)
Anyway, yeah, I'll see how this goes.
K, need a suggestion.
Zak Jones! said:
Anyway, yeah, I'll see how this goes.
Click to expand...
Click to collapse
Sooo, it's not going. Still experiencing the slowdown. I honestly can't think of what's doing this. Advanced Task Manager reports > 190MB free (28 processes running), SetCPU is still running at 499MHz or greater (I can't get 'show CPU to work in Dev Tools?).
Ending everything in the "All Apps" tab does not fix the problem; it's speedy for about 30 seconds, then resumes being slow, with the same problems (so maybe it's a process taking up all my CPU cycles? (But my CPU isn't scaling up like it would in that situation...))
Anything I can try doing before re-flashing and/or wiping? I'd rather avoid that, but, of course, if it's the only solution, whatever. Maybe try flashing a new ROM?
Can't think of what else to do here, gentlemen.
Get rid of SetCPU. I had it installed and it started weirding out on me, would not set the processor higher than 384 and nothing I did in the profiles would set it back to 1 GHz. After I uninstalled, my phone returned to it's normal speeds.
Zak Jones! said:
Sooo, it's not going. Still experiencing the slowdown. I honestly can't think of what's doing this. Advanced Task Manager reports > 190MB free (28 processes running), SetCPU is still running at 499MHz or greater (I can't get 'show CPU to work in Dev Tools?).
Ending everything in the "All Apps" tab does not fix the problem; it's speedy for about 30 seconds, then resumes being slow, with the same problems (so maybe it's a process taking up all my CPU cycles? (But my CPU isn't scaling up like it would in that situation...))
Anything I can try doing before re-flashing and/or wiping? I'd rather avoid that, but, of course, if it's the only solution, whatever. Maybe try flashing a new ROM?
Can't think of what else to do here, gentlemen.
Click to expand...
Click to collapse
You might not like my advice but it's likely to work:
Don't uninstall SetCPU but set your CPU min to 245 and the max to what you want. Disable profiles but select 'Set on Boot' and 'On Demand'. Do nothing else with SetCPU, leave it alone and do not use the active widget. Your current setup is crazy.
Full wipe (as you've done before) data, cache, dalvik-cache, battery, rotate and then install Kang-o-rama 0.7b1 (no, I'm not simply pushing it, I just know it so well that I can assure you it works).
Do not, under any circumstances restore any data or apps for any application with any application. As soon as you set up your Google account go into Settings | Privacy and disable "Back up my settings" and hit Okay.
Install a task manager if you like for monitoring purposes. Install SetCPU as above if you like for OC.
Install no other apps (now that's the painful part) and use your phone for long enough for you to know with certainty whether it's working as you expect.
In all honesty, if it's still broke after that then you've probably got a hardware issue. If it's working after that then slowly add your apps back until you find what's causing the problem.
Good luck, report back.
So far, uninstalling SetCPU is doing wonders for me. Y'know, over the last 15 minutes. I'll use it throughout the day and see if it keeps performing.
Space for future updates:
****ING BALLSACK. <--- First impression of Kang-o-Rama (I decided to just go for it and flash as soon as I saw it included CM.)
^^^^^^^^^^^^ That text is to be read: Kang-o-Rama is amazing. The theme is sexy, I LOVE the Desire camera, and the bundled stuff (kernel, apps, etc) are quite awesome. We'll see if it solves my performance issues.
I was getting the same thing....
Task kill setcpu and reboot it again. If you keep getting the lag then stop using setCPU.
Zak Jones! said:
****ING BALLSACK
Click to expand...
Click to collapse
It takes a twisted mind to interpret that as a complement.
Zak Jones! said:
...Kang-o-Rama is amazing...
Click to expand...
Click to collapse
But thank you!
Delete all widgets that profile your cpu in any way. Stop killing tasks with task killers. Uninstall setcpu. Set exchange email app to "PUSH". Download "Quick System Info Pro" and check what's using up Cpu.
I had the same problem and it turned out to be 2 things: SetCPU widget and exchange email app stuck in a sync cycle.
Maybe theres an ill-performing app that you installed. Since it seems you wiped your phone a couple times including cache. Did you happen to restore apps thru Titanium backup or manually one at a time thru the market.
I always wipe my phone completely and reinstall all apps manually, time consuming, but I have never had a problem.
To further diagnose your problem, see if after installing each app, try the phone to see if there are any slowdowns afterward. Again, I know this is time consuming, but trying to find the problem rather than living with it would be better.
I'm also using 5.0.6 but with no problems or slowdowns.
You can also post a logcat or look thru it yourself if you know how and see if any errors or hangups occur. Logcats are a great way to see the commands being given to your phone and this will most likely reveal your problem.
Same problem, it's annoying.
As android builds are getting more and more closer to being daily builds, one of the standing issues that remains is battery life.
This thread is where posts concerning How to Save battery should go. NOT Questions, but suggestions. If your suggestion is one to look into, it will be added to the OP.
UPDATE: You can now use ALL GOVERNORS For the CPU! (Read more to find out how) --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SetCPU
SetCPU, is an app more commonly used for over/under clocking devices.
This short tutorial will show you how you get the app,
get it running, and of course save battery!
*YOU NEED A ROOTFS.IMG THAT GRANTS YOU ROOT ACCESS!*
1. Get SetCPU
A. Download it from *HERE*. (The only XDA thread I could find for it)
OR
B. Support this great application and get it from the Android market by searching for SetCPU.
-----------------------------------------------------------------------------
2. Getting the App working
1. Once you have the application installed, launch it from your drawer and either grant it Root Permissions or it may auto-configure.
2. Hit Auto Detect Speeds.
3. It should show you the speeds your device it currently running at, now move over to [Profiles] and click Enable and if you want click on Notification.
-----------------------------------------------------------------------------
3. Make your profiles
1. Sleep Profile - 384 Max/245 Min- Interactive setting
(It may seem high, but this keeps it so that your device wakes up quickly)
2. Battery < 30
Max 614/460 Min- Interactive/Conservative Setting
*Try out the SetCPU Widget!*
If you have any personal settings that you think might be better than these please do post!
-----------------------------------------------------------------------------
UPDATE 9/15 ALL CPU Governors!
To use the modules use this kernel built from the GIT, and hit auto detect speeds on SetCPU again. Under the main tab choose Your preferred setting..
You can find what all the the kernels differ in in the further pages of this thread, I will update OP later.
-----------------------------------------------------------------------------
Advanced Tab
20000 Sampling Rate
30-50 Up Threshold (THIS IS THE KEY: This means when your CPU load hits 30%, it will scale up the mhz. If the phone still responds too slow for your taste, set this lower)
http://forum.xda-developers.com/showthread.php?t=777921
Check Set on Boot (And Apply)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Turning off Background Services and Adjusting Brightness
Things like Bluetooth, WiFi, Sync, GPS, and excessive brightness can really kill your battery.
A quick way to manage these settings is to hold down to add a widget on your home screen and choose [Power Widget].
This stock widget allows you to quickly see the service's your using, and the farthest one to your right allows you to switch between four brightness settings.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Using that new kernel link provided, you'll get a nice boost in standby time too! Enjoy!
Additional battery saving tips:
* Don't use a live wallpapers
* Turn off 3G connectivity (Eclair-based ROMS need apps like APNDroid to do so)
* Turn off Background-enabled data transfers in the Sync page.
the app screebl is a battery saver for whenever you have your screen on.
MOD EDIT:
Screebl Pro is a PAID FOR APP..
Link deleted and warning given please do not post warez in the future.
Mark.
Is that a Paid application from the Market? If so it is warez. (Big No-No)
Shatterv2 said:
Is that a Paid application from the Market? If so it is warez. (Big No-No)
Click to expand...
Click to collapse
no it's donation-ware. You can find SetCPU in the G1 device section of the XDA forums for free...
http://forum.xda-developers.com/showthread.php?t=505419
Can we have on our hd2 a folder with Android Sdk ? Like in a rooted one ?
aussiebum said:
no it's donation-ware. You can find SetCPU in the G1 device section of the XDA forums for free...
http://forum.xda-developers.com/showthread.php?t=505419
Click to expand...
Click to collapse
Yes that was already stated in the OP
Shatterv2 said:
*YOU NEED A ROOTFS.IMG THAT GRANTS YOU ROOT ACCESS!*
Click to expand...
Click to collapse
Can you post one?
Ultimaex said:
Can you post one?
Click to expand...
Click to collapse
read here: http://forum.xda-developers.com/showpost.php?p=7088391&postcount=4
Thanks for the tips!
Ultimaex said:
Can you post one?
Click to expand...
Click to collapse
Rooted RootFS.img files by michyprima can be found *HERE* in the Installation Instructions section.
Mark.
SetCPU forcecloses on me with dan's froyo without sense. Anybody get this combo to work for them? Also, I did replace the rootfs file.
Strange, try the new froyo build by Darkstone.
reocej said:
SetCPU forcecloses on me with dan's froyo without sense. Anybody get this combo to work for them? Also, I did replace the rootfs file.
Click to expand...
Click to collapse
Yeah, I'm using SetCPU 2.01 with Dan's v1 vanilla froyo fine. When set to use "ondemand" CPU Governor and Autodetect speeds, getting much better battery life - it's only dropping ~1% every hour now EDIT: when idle, of course
aussiebum said:
Yeah, I'm using SetCPU 2.01 with Dan's v1 vanilla froyo fine. When set to use "ondemand" CPU Governor and Autodetect speeds, getting much better battery life - it's only dropping ~1% every hour now EDIT: when idle, of course
Click to expand...
Click to collapse
Happy to help!
Next thing (when I get around to it) is probably to try out the Conservative CPU Governor module... that will correctly scale CPU power according to load (ie. 245mhz => 384, etc) instead of like On Demand, where it jumps from 245mhz => 998mhz => lower....
ATK
My favorite Ap Right now: Advanced Task Killer - you can find it on market for free. With this you can kill tasks who run in backround etc.
RuffRap said:
My favorite Ap Right now: Advanced Task Killer - you can find it on market for free. With this you can kill tasks who run in backround etc.
Click to expand...
Click to collapse
Use Taskiller. Red Icon in the market. Free App is the exact same as the paid one. Kills tasks as well but detects tasks that ATK cant. Includes features like End apps once screen turns off and kill all apps 10sec's after boot. Great App IMO.
I've found out that JuiceDefender does a good job as well. If you buy the extension (UltraDefender?) it also has a CPU governer module which regulates your CPU speed based on usage.
maseo said:
I've found out that JuiceDefender does a good job as well. If you buy the extension (UltraDefender?) it also has a CPU governer module which regulates your CPU speed based on usage.
Click to expand...
Click to collapse
No need to pay - as I mentioned before, the "conservative" cpu governor module that is freely available (do a search!) will do exactly what you mentioned when used with SetCPU.
Hey all,
Sorry if this has been answered/asked already, but is there a way you can prevent SetCPU from getting killed by AutoKiller? I have the autokill-profile in AutoKiller set to "Default", but the system assigns SetCPU an OOM value of 11-14, which is the highest value for getting killed (essentially regarding it as extremely non-important). How does one PERMANENTLY set SetCPU on the "Do-Not-Kill List"?
Thanks in advance.
PS: I'm running KaosFroyo v35-1 and so I can't uninstall Autokiller.
Short answer: No
Long answer: Noooooooooooooooooooooooooooooooo
Hungry Man said:
Short answer: No
Long answer: Noooooooooooooooooooooooooooooooo
Click to expand...
Click to collapse
Lol...funny stuff
As for OP you can uninstall autokiller if you want too...just look up how to remove apps through adb or terminal on phone.
Hungry Man said:
Short answer: No
Long answer: Noooooooooooooooooooooooooooooooo
Click to expand...
Click to collapse
why cant you just lower the oom value by clicking and holding setcpu under the processed tab and select lower oom value, it will drop it to -17, which practically means it is being ignored.
"Practically" is not what he asked for. What he asked for is a permanent solution.
tyler1524 said:
why cant you just lower the oom value by clicking and holding setcpu under the processed tab and select lower oom value, it will drop it to -17, which practically means it is being ignored.
Click to expand...
Click to collapse
That only works for about 3 minutes, until the system automatically increases the OOM value back to like 12 or 13.
I don't understand... even when I have it set to system default, after a while, it still kills it. So that means, even if I were to uninstall Autokiller, the SetCPU would still be killed after a while?
Doesnt matter if its killed. Its android, itll come right back
Nikolai2.1 said:
Doesnt matter if its killed. Its android, itll come right back
Click to expand...
Click to collapse
That's the problem. SetCPU doesn't.
Acrono said:
That's the problem. SetCPU doesn't.
Click to expand...
Click to collapse
I check my processes constanly and i dont see it going away. Maybe im wrong
Maybe Autokiller is correctly determining that SetCPU is consuming more power and Country cycles than its providing. I've certainly found that to be the case with Kaos Froyo
-------------------------------------
Sent via the XDA Tapatalk App
I'm joking about Autokiller's intuition but serious about the dubious benefits of SetCPU on an already overclocked ROM
-------------------------------------
Sent via the XDA Tapatalk App
Nikolai2.1 said:
I check my processes constanly and i dont see it going away. Maybe im wrong
Click to expand...
Click to collapse
It's always killed after 10-15 minutes, even on the default setting. If I set it to aggressive, immediately after it goes into the background, it's killed within a matter of seconds.
paulbonner said:
I'm joking about Autokiller's intuition but serious about the dubious benefits of SetCPU on an already overclocked ROM
Click to expand...
Click to collapse
KaosFroyo is already overclocked? I notice a huge performance gain when I enable SetCPU and OC it to 710mhz. If KaosFroyo is indeed overclocked already, then it must be set pretty low, or at least, very close to stock settings....
Acrono said:
KaosFroyo is already overclocked? I notice a huge performance gain when I enable SetCPU and OC it to 710mhz. If KaosFroyo is indeed overclocked already, then it must be set pretty low, or at least, very close to stock settings....
Click to expand...
Click to collapse
Ocd to 710 by default
Edit: I've had the best results ditching setcpu and using the collin_ph script, just btw
I see that setcpu is at a constant 2 ooms. Now im using Zen express but idk if that makes a difference. And im set to strict
The real and best answer I have for the first post (and what I do, and advise everyone I am around to do)
Stop using Autokiller.
Android does a great job killing processes.
Most users use 4-5 apps constantly throughout the day, and if the few most commonly used ones stay in memory more often than not, the phone is FASTER, as a result of calling up apps instead of having to completely relaunch them every time.
YES, using autokiller to adjust your memory settings can help if you are normally running process-intense apps in the background (like I sometimes run a VNC for work that will chew up some processor time if I just hit 'home' when I'm done instead of killing the task, or sometimes a small game that you figured was not in memory anymore, is still chewing up processor time).
BUT
That is what, and only what, I use a task killer for. I open up Free Advanced Task Manager, kill my background process that I don't want running, and move on with life.
9 days out of 10, I don't use a task killer, and I NEVER use auto killer.
If you want to keep your phone faster than not, use 'back' to get out of apps instead of pushing 'home'. Unless 'back' is mapped to something in the app (like for some apps), back will end the process rather than leave it running.
I could write ten pages on why to not use autokiller, but a lot of guys who are a lot smarter than me will swear by it. I just find it slowing down my phone by forcing me to re-launch things like Handcent SMS, my Web Browser, and Google Voice, when I'd rather have those things stay running in the background. They don't chew up much processor time just sitting in the 'background', and my phone is WAY faster if it takes 1 second to open up each app instead of 3-6 seconds (because autokiller made my phone already automatically kill the task).
Good luck with your decision, sir.
And if you're using xtrSense, you can just set up your GScript to overclock how you want (mine's at 806800), and if you're using Froyo ROMs, you can use the battery tweak. SetCPU isn't that useful for most of these ROMs, since the methods of overclocking by collin_ph's battery tweak and xtrSense's GScript are faster and more efficient, and don't require a background process like SetCPU to be running.
But that's just my opinion. I hope it helps.
I use System Panel to basically monitor my memory instead of just relying on Autokiller to manage them for me. I also found that the way I use my phone, similar to the way pkopelek mentions, a few select apps a day, my free memory stays fairly close to what it did with autokiller installed. Average around 40-60 and if I kill a few off, up to 90-100.
One thing I have noticed is that System Panel comes with a cpu scale and shows your clock speed. With no SetCPU installed my CPU will drop down to 245 and then bounce around and finally settling back to 245 then the cycle starts again. With Collins tweak I get the same response. However, with SetCPU installed my CPU will clock down to 245 and sit there until I touch the screen. I have to believe that SetCPU is doing something that collin's isn't. Now the only way I can get it to behave this way is if I change the advanced parameters.
just my 2 cents.....
When I used AutoKiller and SetCPU (I used both between May and August) before I started using xtrSENSE v4.x, I never had a problem with SetCPU quitting working under any ROM, including any Froyo that was out at the time.
I only mean that perhaps the problem isn't between SetCPU and AutoKiller. Maybe it is the ROM??? Just guessing here.
Nikolai2.1 said:
I see that setcpu is at a constant 2 ooms. Now im using Zen express but idk if that makes a difference. And im set to strict
Click to expand...
Click to collapse
I'm using this: http://forum.xda-developers.com/showthread.php?t=685594 and the value is ALWAYS above 9. I've never had it down that low except when I temporarily add it to the ignore list (it falls out after about 5 minutes).
hello.
could you help me to chose economy kernel for my device i9000.
i need more working time on my device.
thx for answers
Well, if you are willing to sacrifice some power you could underclock with Damian's ultimate kernel and as well undervolt (whatever your phone can handle)
apart from changing the kernel, have you tried tasker? this app can really help you to save some battery...
I dont no about Kernels But ive heard 'insanity' ROM is amazing on battery life without losing speed and features.
check for it under development and see what Kernel people are using with it.
i try to underclock CPU but program that i use cant use all frequency only 100 - 500 mhz.
can you give me advice what program can underlock CPU and good task killer.
i need much web serfing
elxeon said:
i try to underclock CPU but program that i use cant use all frequency only 100 - 500 mhz.
can you give me advice what program can underlock CPU and good task killer.
i need much web serfing
Click to expand...
Click to collapse
as for now, try damian's kernel, underclocking setting is in the recovery menu. As far as I know, he is working on an app for the new kernel but just try version 1.1
Concerning task killers, I found out that they do more harm than good. Don't use them...
The problem with web surfing is that the display is on all the time (what else?!^^) and it consumes a lot! there is not much one can do about it...
how can i reduce consamption of display? can i change white color on black in browser? to reduce consamption of energy?
elxeon said:
how can i reduce consamption of display? can i change white color on black in browser? to reduce consamption of energy?
Click to expand...
Click to collapse
I assume you have already set brightness to minimum, in addition you could use the app "screen filter" which makes the display even darker but then it is only readable in the dark.
Do you set your brightness to automatic ?? thats a big help
As for changing display color i dont know if thats possible, unless you can find a themed version
EDIT: sorry just noticed the above post
GMH24 said:
I assume you have already set brightness to minimum, in addition you could use the app "screen filter" which makes the display even darker but then it is only readable in the dark.
Click to expand...
Click to collapse
i already done all your advice
may be thomething else?)
i use program that control brightness but i forgot how it's called. i download it from android marke and than reflash device
and say please One Click Lag Fix APK decrease or increase reducing power?
lagfix will always reduce battery life, but the more updated lagfixes use less, but still use more than stock.
Have you got the app "juicedefender" thats a good app and i have been using it daily for months.
elxeon said:
and say please One Click Lag Fix APK decrease or increase reducing power?
Click to expand...
Click to collapse
I ran some test cycles with speedmod and ultimate kernel with both standard file system and converted system. Therefore, I can say that just changing the filesystem does not influence battery life in any way noticeable.
azzledazzle said:
lagfix will always reduce battery life, but the more updated lagfixes use less, but still use more than stock.
Have you got the app "juicedefender" thats a good app and i have been using it daily for months.
Click to expand...
Click to collapse
it's realy working?
thx i will test it.
GMH24 said:
I ran some test cycles with speedmod and ultimate kernel with both standard file system and converted system. Therefore, I can say that just changing the filesystem does not influence battery life in any way noticeable.
Click to expand...
Click to collapse
as i know One Click Lag Fix APK change only file system?
its not MEGA improvement but the donate version has more options. what it does is cuts off all connectivity on screen off, so nothing is being used when it shouldnt be.
its really good IMO, and the partner to the app is 'juice plotter' this will identify what running processes are happening when the phone is idle, allowing you to modify to save battery life a little more. another similar app which is also good but a little hard to understand is 'task identifier' this is similar to juice plotter,
it tells you what apps and processes are starting up automatically. Over night i found 48 processes happening when i was sleeping. THAT drains battery
What exactly are your battery stats?
how long does your phone last on one charge? how long is the display on? how long do you call?
elxeon said:
i already done all your advice
may be thomething else?)
i use program that control brightness but i forgot how it's called. i download it from android marke and than reflash device
Click to expand...
Click to collapse
I like speedmod's modification on screen brightness that allows for even lower brightness than I got from voodoo kernel. No idea if other kernel has such feature.
on one full charge i get roughly 2 days.
display is on automatic and i make about 5 - 10 calls a day, and text all day, i manually push emails every few hours and browse the market / xda / youtube for a few hours a day.
Im not a heavy user, but i play alot of games ( especially angry birds ) im more than happy with my battery usage.
Im also on the JQ1 modem, if this is of any use.
If you want to use screen filter, leave the brightness at automatic and it is great in all but the brightest sunlight. I use auto brightness and 60% filter to good effect. You can create a widget, so it can be turned off if required. It also plugs in to Tasker if you want to set up automatic profiles.
Also, the Super Optimized Kernel is worth a look. Each OC/UV value can be completely customized (unlike DamianGTO's kernel, which relies on a series of presets), using the "Voltage Control" app.
I would stay away from Ext4 lagfixes if battery life is of upmost importance. That said I use lagfixes and am torn between JFS and Ext4 with 'unsafe' mount options (selected in recovery). EXT4 with 'safe' mount options uses far too much battery IMO.
JFS is somewhat unstable, and EXT4 'unsafe' can become corrupt after an improper shutdown. The battery life with ext4 'unsafe' is slightly worse than JFS, but you get a corresponding slight increase in performance. Try each for a day if you go that route before choosing, but for the reasons described above be prepared to reflash in case of disaster...
Hello.
I've got a stock Android 3.2.1 (A501 4.066.29 COM GEN1) rooted with Stock/HV/Taboonay V3.7 for HC 3.2 16-10 - 1.64Ghz/UV control kernel.
The question is:
how to set cpufreq parameters (governor, max_freq,..) WITHOUT using 3rd party apps so that the parameters were restored after reboot.
Thank you for reading this.
Either the kernel needs to support init.d scripts or a service needs to execute on boot.
That kernel doesn't support init.d and Voltage Control has a startup service.
CuriousTech said:
Either the kernel needs to support init.d scripts or a service needs to execute on boot.
That kernel doesn't support init.d and Voltage Control has a startup service.
Click to expand...
Click to collapse
Forgive my ignorance but I can't put to use your answer.
I don't get where is Voltage Control and what I have to do.
Get Voltage Control from the market, make adjustments, save as boot. You'll be given the option to save as init.d script or startup service.
Well.. I tested it. Odd app.
First of all it can see only one core. It's funny. After reboot cpu0 works in conservative mode, max_freq 1.4 GHz and cpu1 in ondemand mode, 1.0 GHz.
I tried to edit init.d script and add the 2nd core but after reboot cpu worked with the default kernel values - script didn't work at all.
Moreover Voltage Control shows voltages turned upside down - the less cpu frequency the bigger voltage values. I fear to use this app
Download setcpu or antutu cpu master it recognizes dualcore , has the boot option
More education would be advised To you PLEASE DONT BREAK YOUR TABLET
Please do not take this the wrong way..
it does sound like you do not know what your doing.. I suggest you read more about over clocking./under voltage of a TEGRA 2 DEVICE.. That will get you more understanding about what you need to do. And maybe even help you decide if you really want to do this or not.. There is alot of resources online about this subject. I have tried custom kernel with set cpu.. I use it on my 650 mhz phone. clock it to 768. but it has a huge battry issue when running at that speed.Not to mention It would be dangerous to leave it on my purse with something running might be a fire bug.. GOOD LUCK .
Basically lower voltage at higher frequencies keeps the CPU stable. Leaving it linear would increase temperature exponentially.
Script Manager can run scripts on startup but I don't know how you could disable them if they keep it from starting up.
I didn't know about VC and dual core though. My bad.
ef1x said:
Download setcpu or antutu cpu master it recognizes dualcore , has the boot option
Click to expand...
Click to collapse
Thank you.
I tried all cpu related apps from the Market that I was able to try. Now I want to try to get along without them.
erica_renee said:
Please do not take this the wrong way..
it does sound like you do not know what your doing.. I suggest you read more about over clocking./under voltage of a TEGRA 2 DEVICE.. That will get you more understanding about what you need to do. And maybe even help you decide if you really want to do this or not.. There is alot of resources online about this subject. I have tried custom kernel with set cpu.. I use it on my 650 mhz phone. clock it to 768. but it has a huge battry issue when running at that speed.Not to mention It would be dangerous to leave it on my purse with something running might be a fire bug.. GOOD LUCK .
Click to expand...
Click to collapse
Thank you Erica
I don't understand? You want something that does the same thing but you don't want to know it's there?
I found one app called System Tuner that lets you adjust CPU frequencies individually. I don't know why though.
CuriousTech said:
Script Manager can run scripts on startup but I don't know how you could disable them if they keep it from starting up.
Click to expand...
Click to collapse
Thank you but it looks too bulky for such a small task. And I still don't want to use 3rd party apps
CuriousTech said:
I don't understand? You want something that does the same thing but you don't want to know it's there?
I found one app called System Tuner that lets you adjust CPU frequencies individually. I don't know why though.
Click to expand...
Click to collapse
Actually I don't like how these apps work. And I thought that setting up a few parameters would't be difficult. It seems I was wrong.
Yep. Code has to execute to do stuff, otherwise that stuff doesn't get done.
System Tuner Pro allows voltage adjustments on overclock settings. If you're interested. Also, has a lot of packages integrated into one (task manager, app freezer, etc). They have a free version in the Market if you're interested. It's nice to have several apps, in one nice package.
Moscow Desire
Thank you but I actually don't need it anymore
I have rolled back to the stock kernel because of constant "sleep of death" issue.
huck_d said:
Moscow Desire
Thank you but I actually don't need it anymore
I have rolled back to the stock kernel because of constant "sleep of death" issue.
Click to expand...
Click to collapse
It's because the 3.7 kernel you used, is really not compatible with the a501. The ultra-low voltage causes "screen freeze" and the "sleep of death" when under 3g only. It's a known issue with the 501 and 3.6 and 3.7 kernels also. I would reccommend RTrips 3.4+. Probably his best for for a501.
I ship it with my own Alexandra II and III rom. No issues with it, and none ever reported.
Had I noticed when I woke this morning, you had an a501, I could have given this advice. Sorry, didn't have enough coffee
---------- Post added at 02:21 PM ---------- Previous post was at 02:18 PM ----------
Moscow Desire said:
It's because the 3.7 kernel you used, is really not compatible with the a501. The ultra-low voltage causes "screen freeze" and the "sleep of death" when under 3g only. It's a known issue with the 501 and 3.6 and 3.7 kernels also. I would reccommend RTrips 3.4+. Probably his best for for a501.
I ship it with my own Alexandra II and III rom. No issues with it, and none ever reported.
Had I noticed when I woke this morning, you had an a501, I could have given this advice. Sorry, didn't have enough coffee
Click to expand...
Click to collapse
The problem, is that a lot of dev's, don't have a501's, only a500's. So they really can't test a lot on it. And sometimes, the issue doesn't happen for 2 or 3 days. Sometimes less. I'm going to experiment a little this weekend, with some of the newer kernels, and mess with the voltage's and see if I can get it stabilized where it doesn't freeze on 3g only.
Moscow Desire ,
Thanks for clearing it up and the advise. I'll try either 3.4 kernel or your ROM.
huck_d said:
Moscow Desire ,
Thanks for clearing it up and the advise. I'll try either 3.4 kernel or your ROM.
Click to expand...
Click to collapse
If you go to RichardTrips kernel thread, you will see a link to his older kernels.
You will find the 3.4 listed on his server. I think you just need to flash it, although I usually dump Dalvak cache.
Alex II is an easy install. Alex III (3.2.1) is a little more ... interesting to install, but not difficult. If you run into an issue, post it in my thread. Everybody else has got it installed, so I think you'll have no issues either.
It's the only "certified" 3.2.1 for the Acer a501 that I know if. Not that the other roms are bad, because they really are good, but, the 3.2.1 they advertise, are from system dumps after running an update, or adding missing files to a 500 rom. The TMPL is an Acer release.