Related
Anyone have any idea about this message.
Cannot Load resource library \windows\MCres???.dll
hmm very odd.
note sure what is trying to load this :shock:
Yea, I'm getting the same message the last few days, I'm not sure what to make of it, right now it's just an annoyance - I haven't noticed anything broken on the device software wise.
Possibly
Well i noticed pocket controller wasnt working correctly reinstalled it and error went away.
could be co-incidence
no, that sounds right, I had Pocket Controller installed but I think it got corrupted, so it's probably an issue with that piece of software.
i hate reviving dead topics but i'm getting this now. I used to get it before and resolved it with reinstalling pocket controller. but after a recent hard reset i attempted to install pocket controller and the install didnt complete. Now everytime i try to install pocket controll it tells me installation unsuccessful then it shows that mcress???.dll
same problem
I have an IPAQ HX2795 and I am having the same problem after installing Soti Pocket Controler.
My first installation went OK. But I got an updated version of the Soti softaware, it asked me to uninstall the pervious version and I "OK"ed it.
Next thing I know I got an error with "Unable to uninstall" things took a dive from there. I can not see Soti on the list of programs installed on the Mobile unit and I get errors when I try to re-install Soti with ActiveSync
I read few solutions, most of the included hard reset. Since I have never done this before and because I already have multiple programs that I need on the Ipaq, I am trying to find a new solution.
Anybody?
Ali Issa
Problem solved
I called Soti support and they were able to help me get it solved.
The solution was as follows:
- get ActiveSync connected
- Explore into the mobile unit, go into the Windows folder, go into StartUP folder
- Find a file called "CommLoader.exe" and rename it into CommLoader.txt
- Un-cradle our unit and then soft reset
- Your unit should start with no error but it will open the CommLoader file into Mobile Word (Just as a text, no biggy)
- Now your unit is ready but you will need to delete the file CommLoader.txt
- Re-install Pocket Controller by Soti
Support also informed me that this issue will be avoided in future versions
Ali
Figures that I can search for 1/2 an hour with this annoying problem and find the answer here.
I had a feeling it was Soti's issue, but couldn't make it go away.
Not sure I'm even going to reinstall the darn thing- for a while anyway.
Thanks.
ali_issa said:
I called Soti support and they were able to help me get it solved.
The solution was as follows:
- get ActiveSync connected
- Explore into the mobile unit, go into the Windows folder, go into StartUP folder
- Find a file called "CommLoader.exe" and rename it into CommLoader.txt
- Un-cradle our unit and then soft reset
- Your unit should start with no error but it will open the CommLoader file into Mobile Word (Just as a text, no biggy)
- Now your unit is ready but you will need to delete the file CommLoader.txt
- Re-install Pocket Controller by Soti
Support also informed me that this issue will be avoided in future versions
Ali
Click to expand...
Click to collapse
well
u never stop amazing me
I have a new (four days old) Cingular 8125, and it got a bit antsy on me today.
After working flawlessly for three days, I was installing some applications on a new 1 GB mini SD card, soft resetting after each installation, when it returned after a soft reset and suddenly had no phone network. No "E" indicator, and an exclamation point next to the signal strength indicator. Uh-oh, thought I, before I broke down and cried! OK - not really, but I definitely wasn't happy about this!
When I checked the network settings, it said No Network under the GPRS setting. I called Cingular, spoke with a data rep, and performed a hard reset. (Had to use the "Clear Storage" app - holding the keys and soft reset wouldn't work). As soon as it returned from the hard reset, the Cingular software the rep had pushed out to me installed and phone service was restored. Which is a good thing!
But now I can no longer sync the device via Activesync 4.1. Nor can I install any applications; when I try, I get a dialog saying that the installation was unsuccessful. Windows installer or CAB installation, makes no difference. I can't successfully install anything on the device. I had scrubbed the mini SD card, except for a few folders filled with icons for use mostly in Pocket Informant and PocketBreeze. I figured that it couldn't hurt to leave them there. I also can no longer delete files or folders from the device. It's similar to not having Administrator rights on a Windows XP machine. As if everything is read-only, but I cannot change it.
I copied Smartkey over to the mini SD card via Explorer in Activesync, but whenever I reset the device I get a dialog saying that Smartkey cannot run, unknown developer, etc. I can't close the dialog right away, but it does disappear after about 30 seconds. If I open File Explorer and tap on the smartkey.exe file it does start and work normally - until the next time I soft reset.
Activesync will connect with the device but will not sync. Throws the attached error message. So I can explore the device but not sync. I tried deleting the partnership, performing a "repair installation" of AS 4.1 - no change.
As for the applications I had installed prior to all of this, they all seem to be benign - with two possible exceptions.
In Main Memory:
Pocket Informant
PocketBreeze
ContactBreeze
iLauncher
On the mini SD:
Resco File Explorer 2005
PDAMill's Gamebox Solitaire, Gems, and Classic
Dinarsoft's HandySwitcher and HandyMenu
Phatnotes 4.7
ListPro 4
Tweaks2k2
Resco Sudoku
Resco Keyboard Pro
All versions that claim to support WM5. All applications seemed to be working fine, with the exception of Resco Sudoku and Resco Keyboard Pro. The only change I had made with Tweaks2k2 was showing the time and date in the taskbar. Resco Sudoku locked the device up, with just a black background and 13 large colored orbs on the screen. I uninstalled it immediately. Resco Keyboard kept giving error messages when I tried to select it as the SIP. I had just uninstalled Resco Keyboard and performed a soft reset when it returned from that reset it had no phone network. Note that all of these applications had been working fine up until this point in time, except Resco Sudoku and the Resco Keyboard Pro. Hmm... Needless to say, I suspect that the Resco apps have a problem with WM5. But I owuld think that a hard reset should have cleared up anything those apps had done. Maybe not, though.
Anyway, that's when I called Cingular. Does anyone have any idea at all as to what could be causing all of this? Or better yet, what could fix this? Please!!
I'm very familiar and comfortable in WM2003/SE, but I'm completely new to WM5, so I'm not even sure where to look for troubleshooting.
Thanks in advance for any advice!
EDIT: Really sorry the thumbnail is so small - I didn't think that it would be, Click on it to read it. Thanks again.
EDIT: Error should read: 0x8000ffff Sorry about that.
I think the fact that you cannot delete files/folders on the device is key. If you cannot modify folders, then the installer can't either, so software installations will fail. Does this also apply to files and folders on your card? I'm guessing that it does not, and that your supposition (key folders and perhaps registry keys are RO now) is correct. Unfortunately, you can't modify folder permissions using activesync explorer and you can't install an application that can either. Catch-22.
Have you tried a hard reset subsequent to your discussion with the Cingular rep? Perhaps this will re-create an installation with the standard settings.
Sleuth255 said:
I think the fact that you cannot delete files/folders on the device is key. If you cannot modify folders, then the installer can't either, so software installations will fail. Does this also apply to files and folders on your card? I'm guessing that it does not, and that your supposition (key folders and perhaps registry keys are RO now) is correct. Unfortunately, you can't modify folder permissions using activesync explorer and you can't install an application that can either. Catch-22.
Have you tried a hard reset subsequent to your discussion with the Cingular rep? Perhaps this will re-create an installation with the standard settings.
Click to expand...
Click to collapse
No, I haven't hard reset again yet - I wanted to wait and see what responses I get.
I did, however, find one of the Activesync logs though, and all sync attempts since the last one that worked have the following two error messages:
"TraceToFile -> ERROR in CChangeTracker::GetMaxCounterInProfileCleanupTable : hr = 0x800ffff - ctapi.cpp(3695)
TraceTraceToFile -> ERROR in CRAPIDevicePrivate:HandlePackets : hr 0x800ffff - RAPIDevicPriv.cpp(443)
And then some whcih are very similar, but with the numbers in parenthesis changing.
Look familiar to anyone?
Thanks.
OK, I just found a Microsoft KB article (Q243349) that seems to indicate that an 0x08000ffff error is Microsoft SQL Database-related.
??? Baffling.
Actually I do have an MSSQL Server on my PC - one of the programs that I run installed it and requires it. Maybe if I disable it?
EDIT: Error should read: 0x8000ffff Sorry about that.
I just noticed that wherever the errors start throughout the log, the only two applications mentioned - other than Activesync, of course - are Resco Explorer and Ilium's eWallet, which is really odd. I never installed eWallt on this device, though it has been giving me fits on my AximX50v ever since they introduced SyncPro about a year or so ago.
My 8125 is up and running again.
I performed a hard reset and this time I downloaded and installed AS 4.1 on my notebook and tried synching with that. My notebook does not have an SQL server installed, and it's a "virgin" AS install - neither Resco Explorer 2005 nor eWallet Pro has ever been installed on that PC.
I can't say for sure, and I'm still investigating, but I believe, based on the Microsoft KB article that I referenced above, that the SQL server on my desktop PC, and possibly eWallet Pro and/or Resco Explorer 2005, is the cause of my recent grief.
The MSKB article specifically targets the SQL database - same version as mine - as a known cause along with certain databases, and since both eWallet and Resco Explorer 2005 are mentioned throughtout the WCESComm.log, always in the first four or five lines of the error messages contained in the log, I suspect that eWallet's DB may have somehow triggered the mayhem, as their SyncPro has caused endless losses of my eWallet data since Ilium introduced it. It's possible that Resco Explorer 2005 just happened to be the application I had just installed before the device went belly up for a bit there. Actually, Resco Keyboard Pro was installed right after that, but since RE 2005 is mentioned in every error log item, and since Resco has a special page on their site mentioning how "...an issue with the way that Windows Mobile 5 handles installing software that may result in a failed installations...". I've written Juro about the issue, to give him a heads up just in case.
So all is well for now. Hopefully I will be able to continue synching my other PPCs (five), all with WM2003/SE, on the desktop, as the SQL thing is only supposed to affect the WM5 OS.
If anyone else runs into a similar situation, please send me a PM or post here. I'd be glad to share whatever I discover on this, and I would also be interested in seeing how other devices were affected, common issues, etc.
I have noticed that my 8125 is increasingly freezing on me. I was wondering if there was a program that can clean my phone of useless files and indicate conflicts in programs that might lead to the phone freezing on me. I would rather avoid having to hard reset and reinstall everything. Is there a shortcut way to the above request? Thanks.
Pocket Mechanic, look for it.. It's like a Norton Utilities for your PDA..
Be careful with Pocket Mechanic's defrag feature on the storage card.... I ran it and it corrupted several files including my tomtom navigation software
If you're having freeze ups I would start uninstalling software until it becomes stable again, then start loading apps back on 1 by 1 until you find the culprit.
SKTools is another good PDA utility.
Does either of these programs diagnose program conflicts that can result in crashes? I really really would like not to do a hard reset.
Hi everyone,
I didn't find any answer on the other thread.
My problem on Win7 is shagctrl.exe crash when I launch it. The controlcenter.exe crash too because he launch shagctrl.
I've tryed many things, software reinstall etc.. but nothing works.
at begining it was working but not anymore.
I just would like to start/stop the wifi, I don't need shagctrl, is someone has another solution i'll take it.
Please help me
As far as I know shagctrl does not work on windows 7. I've tried every method that claims that it works on windows 7 but I could not get it to work and I've read that so many people are having trouble enabling shagctrl. Only method to turn it back on (Wifi and BT, if it's off) is to download a file which will give you ability to turn those on and off. I forgot where I've seen those file but it doesn't hurt to use search button. Everything else works perfect except for that control.
strange, after installing W7 and before doing any update it was working fine. It was after lot of update it stops working.
Now, sometimes, I can launch the control panel, and after a reboot it's not working again.....so strange
What build of Windows 7 are you using? I use Ultimate RTM, fully updated, and my ShagCTRL works just fine, everytime.
Mine works fine too. I installed Windows 7 from DVD.
ShagCTRL certainly DOES work relaibly, on both of my W7 Shifts and those owned by others here. You just have to follow the instructions!
Please follow EXACTLY the instructions in my sticky post "My fast shift with 2GB etc". That links to a step-by-step guide. The most important part is:
"IMPORTANT When you've finished installing your drivers but still need to restart to take effect, go to your display settings (right click the desktop) and select a non aero theme. save settings after that. Windows 7 Basic is a non aero theme and it looks good. If you leave Aero enabled, your shift will blue screen of death crash when it boots into high res mode.
Windows 7 can not run Aero in high res on the shift. (for now, at least)
When you install the drivers – beware that you have to install them with Vista Compatibility mode enabled and run as Administrator. Right-click the driver setup file – click the Compatibility tab – select Windows Vista and mark “run this file as Administrator”
But please read my post and the linked post. In my experience ShagCTRL crashes or does not start on W7 if you fail to switch to a non-Aero scheme before installing, forget Vista compatibilty or to run as Admin.
Richard
RSargeant said:
ShagCTRL certainly DOES work relaibly, on both of my W7 Shifts and those owned by others here. You just have to follow the instructions!
Please follow EXACTLY the instructions in my sticky post "My fast shift with 2GB etc". That links to a step-by-step guide. The most important part is:
"IMPORTANT When you've finished installing your drivers but still need to restart to take effect, go to your display settings (right click the desktop) and select a non aero theme. save settings after that. Windows 7 Basic is a non aero theme and it looks good. If you leave Aero enabled, your shift will blue screen of death crash when it boots into high res mode.
Windows 7 can not run Aero in high res on the shift. (for now, at least)
When you install the drivers – beware that you have to install them with Vista Compatibility mode enabled and run as Administrator. Right-click the driver setup file – click the Compatibility tab – select Windows Vista and mark “run this file as Administrator”
But please read my post and the linked post. In my experience ShagCTRL crashes or does not start on W7 if you fail to switch to a non-Aero scheme before installing, forget Vista compatibilty or to run as Admin.
Richard
Click to expand...
Click to collapse
Some time has gone in between...
Sorry, but: i had followed your Instructions carefully when installing Win7UltimateSP2, and never returned to an AeroTheme.
Everything worked fine till some days ago my Shift had an automatic Windows Internet Update containing some new Marvel driver.
Since then ShagCtrl neither via hardkey, nor by doubleclicking its .exe can be started- in 19 of 20 attempts
You can see this little circular arrow spinning and then vanish, while taskbar is in a way slightly flickering.
The only good thing about it: since then W-Lan connects in about 2 seconds, before this it often took 20 or more...
Any one here has got some good idea?
Maybe find this driver, re-download it and install it manually in Vista compatibility mode as admin?
edit: lucky me Win7 has got some really cool restorefunction- five days back, reset of wifi setting and everything runs smaaart
edit#2: afterwards i remember you told us updating drivers may be no good idea if device runs fine.
Never touch a running system...
B-44 said:
Some time has gone in between...
edit: lucky me Win7 has got some really cool restorefunction- five days back, reset of wifi setting and everything runs smaaart
edit#2: afterwards i remember you told us updating drivers may be no good idea if device runs fine.
Click to expand...
Click to collapse
I was about to suggest you did a system restore, then saw you had. I'm glad that fixed things.
However it would be interesting to see what it is that is breaking the HTC, as the updates often have other important security-related fixes.
As a safety tool, I always back up all the drivers from a working system, especially Touch, so that I can get older or alternative drivers back. Most of the automatic driver update programs will do that, even the free versions. It's not worth paying for the automatic driver update facility!
I suspect that if you save the old driver, then update, delete the new driver and restore the old, you get the Windows update and all will still work.
I am still using my Touch, but the project I am working on at present means it doesn't get used much. I wish I could get Windows 8.1 working on it, but I think W7 is the end of the road.
Enjoy.
Richard
Well,inbetween i have updated with Marvell sd8686.75.Vista.BG Driver,
dated 22.08.2008 as my Shift generally had problems detecting modern Wifi devices-
which was annoying as our Router is just two years old.
Before loss of Control Center there also has been an update of Microsoft C++ 2005.
I went back to a point before this.
I now take Paragon Backup to save my System to a micro USB
(and also for replacing 40 GB disk by 128GB SSD).
edit: it definitely is caused by C++ 2005 redistributable.
When installing Shagctrl C++ gets customized,
and obviously an update kills these settings.
Everytime i plug my phone into my computer, it automatically saves all my pictures and music to my PC music/pictures folder. how do i disable this? Another issue is when i put music to ym collection and then later on delete form collection, it clears my phone and computer songs. how do i fix this?
You have ypur mobile and computer syncronized, enter in the Windows programs you use to sincronize (depends of the version of windows change) and configure which folder you want to sincronize, that is, uncheck music an pictures to not longer sincronize this folders between you computer and mobile device
You are probably using ActiveSync, which by default will sync items. You have to go to ActiveSync options and disable syncing for the items You don't want to be synced.
dejavu157 said:
Everytime i plug my phone into my computer, it automatically saves all my pictures and music to my PC music/pictures folder. how do i disable this? Another issue is when i put music to ym collection and then later on delete form collection, it clears my phone and computer songs. how do i fix this?
Click to expand...
Click to collapse
You disable synchronizing (aka ActiveSync) by removing entry
Code:
"repllog.exe RS232_DETECTED"
from phone's notification-events database. You'ld reach this with a MortScript-code looking like this
Code:
If(RegRead("HKLM","Drivers\USB\FunctionDrivers","DefaultClientDriver") EQ "Serial_Class"))
RunWait("CeRunAppAtEvent.exe","repllog.exe NONE")
EndIf
which simply deletes any 'starting ActiveSync' from phone's notification-events database.
from phone's notification-events database. You'ld reach this with a MortScript-code looking like this
Code:
If(RegRead("HKLM","Drivers\USB\FunctionDrivers","DefaultClientDriver") EQ "Serial_Class"))
RunWait("CeRunAppAtEvent.exe","repllog.exe NONE")
EndIf
which simply deletes any 'starting ActiveSync' from phone's notification-events database.
Click to expand...
Click to collapse
Hi,
I'm using a PNA with a WinCE6 "light version" (nothing is kept in registry and windows folders on each soft reset).
I tried this MortScript-code and does not work, perhaps because there's no "CeRunAppAtEvent.exe" in my \Windows folder.
Is there another way by changing registry keys ?
Tx in advance
poulette73 said:
I tried this MortScript-code and does not work, perhaps because there's no "CeRunAppAtEvent.exe" in my \Windows folder.
Click to expand...
Click to collapse
Isn't part of CE. It's a utility written by TroNik and part of MioPocket 4.0 distribution.
I attached it.
Thanks for this fast answer, and for program
Tried but repplog.exe still able to connect with my PC.
I've found these registry keys :
USB-ActiveSync
Code:
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
"DefaultClientDriver"="Serial_Class"
[HKEY_CURRENT_USER\ControlPanel\Comm]
"AutoCnct"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\AsyncMac]
"Group"="NDIS"
"ImagePath"="AsyncMac.dll"
[HKEY_LOCAL_MACHINE\Comm\AsyncMac\Linkage]
"Route"=hex(7):\
41,00,73,00,79,00,6e,00,63,00,4d,00,61,00,63,00,31,00,00,00,00,00
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1]
"Group"="NDIS"
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"BusNumber"=dword:00000000
"BusType"=dword:00000000
"DisablePowerManagement"=dword:00000001
USB-MassStorage
Code:
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
"DefaultClientDriver"="Mass_Storage_Class"
Because I would like to disable ActiveSync process and only use USB as mass storage.
But still doesn't work. Maybe not possible with my unit.
EDIT: oh I've found my solution with your MioPocket 4.0 suggestion !
It's a small program called 'USB Loader.exe' => I can switch between "Mass_Storage_Class" & "USBSER_Class" OTG.
That's great !! Thank you jwoegerbauer
Try to check out video link : videojugDOTcom/film/how-to-turn-off-auto-sync-in-itunes-if-you-have-a-pc