HI EVERYBODY
i am wwriting you from algeria no htc help here
ive installed a french rom for my phone , i thought that it was a elf, it was running for 2 days without problem
yesterday i switched off my phone , and then it doesnt start again
all what i have is an logo operator from telefonica then black out
i tried again to reflash it without succes
when i boot the boot loader
ive the following message
ipl 2.20.0002
SPL 1.11.0000
NEED HELP TO KNOW WHET TO DO
AND WHICH KIND OF ELF IS IT ?
HOW TO DO IT JUST BY SERIAL OR PART NUMBER
THANKSSSSSSSSSSS
Do you know your original rom and details? Does it sya RUU in the top right in bootloader mode, and also USB in bottom left?
(I think they are the positions, I may be wrong)
Related
Hello Buds,
I've upgrade my p 3300 a few weeks ago with Artemis_touch_1.0_WWE_rapid
IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
After some days a freeze and soft reset, I made a hard reset, and re-use the upgrade soft ware.
Now its completly block on the boot page with HTC.
I use RUU(in( Artemis_touch_1.0_WWE_rapid) in the Bootloader but it run but after 3% : error 270
If a use a newer RUU ( Release_Aje_fr_1.90Full_YuanYuan) : error 260
please help me I completly lost !
Trux 13
HTC P3300IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
I had almost the same problem. I intented to change my ROM with an WM6 but it faild and the PDA is some kind dead it freezes in the boot screen. is there some tool to change the rom to an original HTC rom or thre is no help. I hope somebady can help me. the version of the ROM that apears on the screen is:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 4.0.0.0
I've tried to :
Hello...
In bootloader run USPL
It run, to 0% >> to 100% but right after : error 270
Still block...
Trux 13
hmm i don`t know how i can get the device to boot loader mode can u tell me how
Bootloader
Go in ths Thread :
http://forum.xda-developers.com/showthread.php?t=306880
Trux13
hi i solved my problem i used one spanish version of the WM6 for P3300 and it works if u want hire is the link http://www.megaupload.com/es/?d=YZOQEF4H
u can install it and then change to one on english its what i will do today and i saw how to enter in 3 color bootloader mode ON/OFF boton + VOCAL + RESTART then holding the ON/OFF + VOCAL
Stillnot working
I tried your *.exe file but not working
Trux
me too . always the error
ipl 1,14,0001
spl 1,14,0000
g 02 67 90
os 1,14,00
i ll be crzy! jesus! someone help me!
how to run the uspl on this tm phone ?
Has anybody solved the problem? I have exactly same errors and can't do anything
Try This:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
i tried this already. Invalid certificate any other ideas ?
woojtekr said:
i tried this already. Invalid certificate any other ideas ?
Click to expand...
Click to collapse
Hi
if you need still help GG9735272
the only solution !!!!
woojtekr said:
Has anybody solved the problem? I have exactly same errors and can't do anything
Click to expand...
Click to collapse
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
savich said:
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
Click to expand...
Click to collapse
I have the same problem and I've come to believe that this is the only solution. Just one thing: I didn't back up ROM before I tried to flash (talk about a noob mistake).
So, I ask, I plead, I beg... can anyone tell me where to get an original Orange France ROM for the Artemis (SPV M650)?
To my knowlegde you cant backup the rom from your device. whenever you change your rom, use the USPL tool. It is a golden rule until something better is made.
Here are some tips:
First make sure you have a original factory rom from your provider/brand/etc.
Check with a soft reset if code: SPL 1.11000 appears on the the boot screen. (then it is CID unlocked) Any other number and it is locked so you have to USPL first before you change to any custom rom.
If you flash a factory rom then the SPL resets to a non SPL 1.1100 number again. Use USPL to CID unlock again.
Also avoid Vista (especially 64bit) to use the USPL tool. Do it on a windows XP machine. Also there reports of glitches in the usb connection and active sync when doing upgrades or USPL. So keep you system as clean as possible. Dont use a USB hub and disconnect any other usb devices just to make sure.
Also remove your SD / SDHC card before doing a upgrade.
Sometimes the new rom misses some stuff when flashing. When this happens just flash the rom again. But first make sure if its still CID unlocked by soft reseting and check if SPL 1.1100 else use USPL first.
Even if you did all that, there still can be things that can go wrong. So if you absolutely confident to do a custom rom then do it. Otherwise use original upgrades from your provider
brim
help i breaked my htc p3300
jai lereur 270 jai essaiyer tous les rom rien ne marche ::
p3300 work again
p3300 movistar work again
Hi,
I tried to upgrade my rom, now i'm stuck on the bootloader screen. I treid to to use the update original rom orange fr it gets stuck on 4% and then says it can't update.
So im totally stuck in the boot loader. I tried several roms, al the same problem.
Please help me!!
IPL 1.28.0001
SPL 1.28.0000
GSM 02.67.90
OS 1.12.0.0
hi sorry for my bad english but I had the same problem can u tell me what program u use to flash it wen it stucks in the boot screen because i can`t flash it i dont know haw im totali blocked
Please help me
Hey people,
I have got on nice MDA with ipl and spl 2.21.0001
me problem is i have no idea wath did happend to it.
the MDA starts up shows T-Mobile ... an go to the Bootloaderscreen (red IPL2.21.0001, green spl 2.2.0001, blue, with)
so i have tried to flash it now with WM5 from T-Mobil image ver 2.26.10.105 (from this nice Board here
The flash tool shows no image information of my MDA but the posibility i there to push the update button. If i do that the update tool trys to flash a few seconds and stops with error code 294 (invalid vender id). on the MDA is noch change (still bootloaderscreen)
some one of you has an idea wath could be happend to this device ?
or an idea wath can i doo ?
Yes!!!
Your problem... is NOT READ Enough!
So please read how to make a hardSPL cause your wizard is G4....
if you do it well you can upgrade whatever you want but for this time... you need to exit bootloader screen so... perform sofresets! or hardreset!
Keep reading for more chances...
You don't need to apply HardSPL or SoftSPL to flash an official stock rom.
Which language or version was working primarily on the phone before you flashed t-mobile 2.26 ?
Secondly download 'RUU_NoId' or 'RUU_MUN' and replace it with the RUU in the rom and Run the replaced RUU,hope it'll work.
Hi,
and thanks for the answers.
i do not know wath was befor on it. i have get it with the information that there was an klabel inside for the keybord not in the slot .... and after "reparing" - the mda do not boot.
up to now i have update it with orginal firmware and it runs again ... so peraps someone has talk **** to me ?! - now i think it was a bad flash
p.s. the vendor id problem was my mistake, was the wrong update
Hello,
I got problem when upgrading mais PDA. my PDA is locked for Orange(France) and wanna unlock it.
I folewed the unlock tutorial , but at the end the phone shutdown after displaying the splash screen. seems that the rom was wrong.
I got ERROR 270 when I try to upgrade with differente rom. so right now, I can not it.
please help !!!
How do you unlock?
What is your IPL and SPL?
It should be 3.10 .
Unlock error codes are located here:
http://wiki.xda-developers.com/index.php?pagename=Elf_RUU_Error_Codes
thank for your replay
I used the USPL tutorial to unlock, but when update the rom I think I used a wrong version.
my IPL SPL 1.16.
my HTC ELF 0100 didn't continue starting.
I tried most solution found on the net.
Wait, what?
You used the wrong version to update?
which is?
I didn't remember exactly, but I have a T-Mobile Splash screen.
the phone shut down seconds after starting.
thanks for help !!!!
any one have an idea on how to recover my phone , please help !!!!!!!!!!!!!!!!!!!
my elf is in 3 color, try mani soft but not work any ideea ?
I updated the original ROM to wm 6.1, cause the old one was Spanish. After this it worked for 30 minutes, but then it made re-start every 5 minutes. Turned it off, but cannot turn it on again. The first screen with Vodafone comes up, then it shuts down again. I can enter bootloader tricolor mode, but there is no RUU on the right corner, just two version numbers on the left side. Please help! Tried soft and hard reset, didnt work.
what it shows on boot loader mode ???????
don't worry just unlock and update spl , ipl
and then flash with any good rom ( not official rom )
i would suggest u to flash with onyx_6_release13 .
best of luck .
How do I unlock it, if it wont turn on, a cannot connect it to my PC?
I will make a screeshot from the bootloader screen.
Thank you in advance.
Ok, now it works. Used the method of dsixda. Worked fine.
hi
I have got a bricked HTC ELF with a tri-colour screen.(red, green and blue). I did try matty.exe and found that cid is locked. g_cKeyCardSecurityLevel = FF
I dont have the original firmaware backed up. and could not find anywhere on this site and internet.
device id: ELF010050
cid: HTC E11
IPL 1.17.002
SPL: 1.17.0
any help or suggestion plz?
regards
gogagogi.
Read all the stickies, it is covered in there. Don't hijack threads, and post in relevant sections please.