Trickle Charge - Focus General

So, i've tried charging my phone via computer twice now and every morning i do, i wake up with an all but dead device. While it says it's charging, it doesn't seem to do anything more than simply keep the device at minimal operational levels of energy. Anyone else experiencing this???

older computers and charging through a hub will cause this.
with my focus, it takes about 3 hours to charge fully using the computer or about 2 hour to charge using the included charger.

This happened to me last night
I have now had my phone 6 days. Each night, I have charged it by plugging into my computers USB port, so that I can sync that days podcasts. On each night, it has fully charged by the time I wake up in the morning.
This morning, I unplug the phone from the USB cable, and I notice that I only have one bar on the battery meter. I checked the USB cable where it plugs into the computer, and it appeared OK. I unplugged the USB cable from the computer, attached it to the wall plug adapter, and plugged it into the wall outlet. After about an hour, it looks like it has charged a bar or so.
So, maybe I just didn't insert the plug very well. Maybe. Crap.

Most PCs turn off the USB port during sleep. If that happens, your phone battery will be drained by the PC instead of charging.
Newer laptops now carry USB ports that will not turn off during sleep or off for the purpose of charging.

kbanes said:
So, maybe I just didn't insert the plug very well. Maybe. Crap.
Click to expand...
Click to collapse
Perhaps, or it is not your fault and simply a bad cable.

Related

Battery drained out totally while connected to PC

This morning I almost got a shock because my X1 stayed black and seemed to be totally dead. Luckily I soon figured out that the Battery was empty, no currrent left on it to let the device even blink. But what happened? When I went to bed yesterday I connected it to the USB cable and left it charging! Everything seemed the same as all the times before. What may have caused this?
Only things that were diffrent from my usual charging procedure:
The Cable were connected to the PC USB Slot.
I shut the PC (laptop in this case) down but the USB Slots had still power. The charging lights of my X1 followed their normal pattern.
Normally I unplug the power cable from PC to prevent the USB Slots to have power. Because my USB harddisk keeps rotating while having power from the USB.
Normally I charge the X1 directly from the power outlet. X1 turned off.
So this time PC was off. X1 was off. USB Slots still got power. X1 connected with USB Slot. X1 seemed to charge normally.
Well, the result was that my X1's Battery was totally empty the next morning. Obviously instead of charging the USB slot drained of the whole battery power! But note that the charging lights were active as normal and the Battery was still warm in the morning.
Perhaps this helps others to prevent such issues.
you are crazy if you:
1. charges from laptop
2. from powered OFF device
you can repeat this case endless - xperia will be drained
Dadaism said:
This morning I almost got a shock because my X1 stayed black and seemed to be totally dead. Luckily I soon figured out that the Battery was empty, no currrent left on it to let the device even blink. But what happened? When I went to bed yesterday I connected it to the USB cable and left it charging! Everything seemed the same as all the times before. What may have caused this?
Only things that were diffrent from my usual charging procedure:
The Cable were connected to the PC USB Slot.
I shut the PC (laptop in this case) down but the USB Slots had still power. The charging lights of my X1 followed their normal pattern.
Normally I unplug the power cable from PC to prevent the USB Slots to have power. Because my USB harddisk keeps rotating while having power from the USB.
Normally I charge the X1 directly from the power outlet. X1 turned off.
So this time PC was off. X1 was off. USB Slots still got power. X1 connected with USB Slot. X1 seemed to charge normally.
Well, the result was that my X1's Battery was totally empty the next morning. Obviously instead of charging the USB slot drained of the whole battery power! But note that the charging lights were active as normal and the Battery was still warm in the morning.
Perhaps this helps others to prevent such issues.
Click to expand...
Click to collapse
Don't charge it in standby mode, how stupid is that?
What? I don't see any reason not to charge it from a laptop. Even if it's powered off, as long as the USB ports have power (mine has a BIOS setting for this) there is nothing wrong with that.
Also, what does it matter if you're charging the phone powered off or powered on?
On an interesting note, however, the same thing actually happened to me last night.
I plugged the phone into the wall socket to charge it (battery was at about 20%) and I actually saw the battery percentage rise as I was still using the phone. I turned it on in the morning (from standby, not powered off), and as soon as I pulled the power cable it went dead as the battery was completely empty.
I have no idea what might have caused this, and it hasn't happened to me before.
Next time dont power off ur X1,
if same happends then your battery is suffed.
Ethermind said:
1. charges from laptop
2. from powered OFF device
Click to expand...
Click to collapse
1) This was accidently
2) Why? I dont like it when mobile phones are on standby while I'm asleep. Charging the device when powerd off should make absolute no difference? Worked everytime but the one where it was connected to a powered of laptop.
Why will the Xperia been drained?
poetryrocksalot said:
Don't charge it in standby mode, how stupid is that?
Click to expand...
Click to collapse
Do you mean standby or powered off? Why should it make any difference? And why does the battery getting drained?
Jasand said:
Next time dont power off ur X1,
if same happends then your battery is suffed.
Click to expand...
Click to collapse
My Battery is quite healthy. *lucky*
jjm34 said:
What? I don't see any reason not to charge it from a laptop. Even if it's powered off, as long as the USB ports have power (mine has a BIOS setting for this) there is nothing wrong with that.
Also, what does it matter if you're charging the phone powered off or powered on?
On an interesting note, however, the same thing actually happened to me last night.
I plugged the phone into the wall socket to charge it (battery was at about 20%) and I actually saw the battery percentage rise as I was still using the phone. I turned it on in the morning (from standby, not powered off), and as soon as I pulled the power cable it went dead as the battery was completely empty.
I have no idea what might have caused this, and it hasn't happened to me before.
Click to expand...
Click to collapse
What does this BIOS setting say? I assume that my USB slots had too less power when laptop is off. But its very strange that your Device got drained while connected to the wall socket and in Standby mode. Maybe my USB slots were not the cause? Weird ...
Dadaism said:
What does this BIOS setting say? I assume that my USB slots had too less power when laptop is off. But its very strange that your Device got drained while connected to the wall socket and in Standby mode. Maybe my USB slots were not the cause? Weird ...
Click to expand...
Click to collapse
It is weird. Since your phone was off I don't think it would use any of its battery power.
I have a ThinkPad, and IIRC the BIOS setting is something like "Always On USB", in the USB settings. With this turned on the laptop will power its USB ports even when turned off, as long as the laptop itself has the power cable connected.
Dadaism said:
2) Why? I dont like it when mobile phones are on standby while I'm asleep. Charging the device when powerd off should make absolute no difference? Worked everytime but the one where it was connected to a powered of laptop.
Why will the Xperia been drained?
Click to expand...
Click to collapse
from powered off PC, when power on usb enough to wakeup PC or feed LEDs,
but not to charge another device. in that case power go into the weaker side, means from x1 -> pc
I had this problem too... seems after hard resetting my phone one time, one option was different to normal after I hard reset,
Click on the battery icon at the top of the screen
Theres a tick box, that says:
"When device is turned on, do not charge the battery when connected to the PC."
this was ticked for some reason. Unticked it, and all was fine.
Try it
I noticed this happened to me too for the first time, after i put in the wall charger and the the phone seemed to charge, i found it completely dead after 3 hours and the battery was warm, running a vanilla R1A
Battery
Also I think for the X1 to charge- it requires activesync. from my experience, when connected to the pc- without activesync, the X1 would indicate charging- but never actually gets charges. Hence when your notebook is off, activesync obviously wouldn't be running-> no charge either.
chinkyeyed09 said:
Also I think for the X1 to charge- it requires activesync. from my experience, when connected to the pc- without activesync, the X1 would indicate charging- but never actually gets charges. Hence when your notebook is off, activesync obviously wouldn't be running-> no charge either.
Click to expand...
Click to collapse
I assume a turned off PC would only power its USB port power pins and wouldn't respond to any transmissions on the data pins. So to the phone it should look just the same as if it were connected to the wall charger (just probably with a bit less power).
Also, when I have my phone connected to my laptop through USB Internet Sharing it does actually charge (it doesn't connect to ActiveSync when using Internet Sharing).
The device should charge in any USB mode as the USB port's power pins supply power regardless of the protocol used on the data interface.
Does the X1 have no safety feature that does prevent the battery from being drained?
In my case I assumed it happened because of the USB Port had too less power. But when you turn off your PC (+USB power) and let the X1 connected it would still mean a movement of current from the X1 Battery --> inside the PC as long as they are not on the same potential. If the PC is earthed somewhere (for example connected to the wall socket) the Battery would be drained out totally! They never get to the same potential as long the Battery has power.
As jjm34 mentioned, if the PC is on and USB slots powered normally the X1 should charge in any case.
Maybe this is not the real cause of the problem. People are reporting that the X1 got drained while connected to the wall charger! That's really weird. How can the battery being drained by this? Any suggestions @Ethermind ?
jjm34 said:
I plugged the phone into the wall socket to charge it (battery was at about 20%) and I actually saw the battery percentage rise as I was still using the phone. I turned it on in the morning (from standby, not powered off), and as soon as I pulled the power cable it went dead as the battery was completely empty
Click to expand...
Click to collapse
viperhead said:
I noticed this happened to me too for the first time, after i put in the wall charger and the the phone seemed to charge, i found it completely dead after 3 hours and the battery was warm, running a vanilla R1A
Click to expand...
Click to collapse
It could be:
It's drawing power FROM your x1 to provide power for laptop internal components.
Dadaism said:
...............
Maybe this is not the real cause of the problem. People are reporting that the X1 got drained while connected to the wall charger! That's really weird. How can the battery being drained by this? Any suggestions @Ethermind ?
Click to expand...
Click to collapse
Mine has. Put it on the wall charger and the charging symbol is there. It reaches 100%, the charging symbol disappears and it shows 100. Then in the morning it's at 90% even though it was still on the wall charger.
I've not left it plugged into a 'running' pc or laptop long enough to see if the phone runs off the battery after it's reached 100%, but it shows the same symptoms. Charging symbol until 100%, then it changes to 100%, no more charging symbol.
Even MSVC stops reporting '% & charging', just reports the % level once it's reached 100%.
I made 2 observations :
It seems the X1 need usb data pins active to charge the battery. The wall plug has something enabled to give power to the data pins (by the way, the wall plug can charge an iPod or an iPhone, it works perfectly). I tried using a cheap wall plug bought in china, no way to charge the X1 or my iPod as there was no power on the data pins. So when connected to an off PC, I'm not sure what's happening. If someone can give a try to analyze this with a multimeter, that would be nice.
It seems also the X1 stop charging after going to 100 %, and won't charge anymore unless you unplug - replug it.
Thanks for your contribution.
Maybe there exists a real hardware failure.
Normally the X1 should charge until the Battery reaches the 100% level. Then there has to be a switch that prevents the Battery from getting overloaded which is good. So charging stops.
The switch blocks charging until you unplug the device once it has reached the full battery level. Thats ok, too. You should not loose much Battery after a full charge and with a device on standby or powered off. And it prevents the Battery getting reloaded at high percentages. Otherwise it would start charging at 99% and stop again at 100 and so on, all the time.
But now assume the switch has sometimes, somehow a failure.
Instead of preventing current to get inside the battery it enables that current can flow into the wall charger.
I do not expect that the current flows into the power outlet. Maybe it gets "lost" in the current transformer that you've plugged into the power outlet (Thats the one you plugged the USB cable in.). Lost means it simply gets warm / hot.
Measuring the current with a Multimeter would be a nice proof. If someone has the technical knowledge and qualification to disassemble the current transformer and the USB cable, you have the go .
I haven't tested it, but I doubt the current flows back into the charger, or back into the USB port on a laptop / pc.
But how does the Battery discharge then? When there is no current flowing out it will stay loaded. (it goes like d(q)/dt+div(j)=0 )
Did you all charge your phone while it is on (standby)? I noticed the same problem when I charged my x1 while it is standby. When I pull the plug from my laptop (I used my laptop for charging, laptop powered on), I get 90% battery life. It seems like there is a switch to cut out the power input if the battery reaches 100% and power the phone from the battery.
Try to charge your phone while it is off. I did it yesterday, and it had stopped charging even before I unplug it from wall output, and I got 100% battery life.
Btw, this is not confirmed yet... it is just based on my experience...

Now my phone won't charge

Totally stock (but i don't think it matters).
Plug the phone in, orange LED comes on.
Hold it or place in on the counter five seconds later, LED is off.
Had the phone since 6/4.
Anyone else having issues?
Are you using the AC charger ? I have two Evos and one of the chargers does what you are describing. The orange LED comes on and then goes off after a while and the phone stops charging. Does it on both phones, the other charger works fine with both usb cables.
Are you using the USB charger with a computer or laptop or plugging straight into the wall with an AC charger?
This does make a difference because if you are charging with a USB + laptop combination you could be suffering from the computer going to sleep and disabling the USB ports power to conserve laptop battery life. If you are having the issue when plugging into the wall, try plugging into a computer and selecting the "Charge Only" option when your USB debug comes up. Once it does this, allow it to charge for a period of time and then turn the phone off, switch to AC power plug and see what happens.
Perhaps you had some kind of over voltage spike on the charger through the AC plug. I could see it possibly tripping something in the phone to stop taking charge to protect the handset.
Also make sure if you do use a laptop, use a USB 2.0 or better port. More power and faster connection. Gotta love it.
Your charger may not be sourcing enough current anymore (for whatever reason). I have seen the exact same behavior with USB car chargers that were only sourcing 100-150mA.
Have you tried plugging the USB cable into a modern desktop PC? (Some laptops have reduced current ports, so a desktop is a safer bet)
Its definitely a current issue. I tried to charge my phone using my bluetooth headset's wall charger, but I got the behavior you are describing. The bluetooth headset's charger just doesnt put out enough current.
Are you using the charger that came with the phone? if so, you may want to exchange the charger...
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
tarheelsmj12001 said:
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
Click to expand...
Click to collapse
Probably not a driver issue, but that that rail from the power supply is either undervolted (say 4.6V instead of 5V), or can't provide enough current (amperage) or both. If I recall correctly, the Evo needs 5V @ 1A (+/- 3% tolerance).
Phone not charging
my phone has been charging fine since I got it... even been using the night desk clock app while sleeping at night for the alarm with it plugged in... everything was good...
With my phone about to die today, I plug it in to the wall charger, the led/batter indicator shows that it is charging... then POW.. it says I have a low battery and it needs to be plugged in... WTH??? it is plugged in!
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Weird thing now is that I took my hero battery and put it in my EVO, plugged it into wall charger, and it stays charging... So, I put my EVO battery in my hero, plugged it in, and whola... it's now charging...
Please help as I am baffled.
MILH0U5E said:
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Click to expand...
Click to collapse
that's your problem right there. that custom kernel is known to have charging issues.
I'm having the same issue with my car charger consistently. Plus my AC charger less consistently. For example, I'll go to bed and plug it in, the next morning I wake up and see the phone is at 80% charge and isn't charging. At some point over night, it gave up. This is with the stock charger too.

Won't charge from computer?

Anyone else notice that it won't charge from a computer? (well monitor) With my Aria i ran a USB cable from my monitor at work to the phone. the monitor wasn't connected (USB) to the computer, and it would just work as a charger. Doesn't seem to work with the atrix. anyone else able to confirm?
more info. does in fact charge when connected to a computer. but due to security reasons the company does not want phones connected to the companies. That is why i was using the monitor. Going to have to look into why it doesn't work this way for this phone. or just buy a longer cable and use the wall plug.
Mines actually not charging when connected to my laptop, wall is fine. The phone recognizes that it has a usb connected, but it doesn't charge and battery state still reads as discharging.
Also wondering if this is an issue for anyone else
Mine charged extremely slow from my PC and my laptop, the wall charger does it much faster.
USB ports on a computer don't usually provide enough voltage to charge a phone as fast as they normally do when plugged into the wall. My motherboard actually has a piece of software that supposedly enables phones to charge faster when connected to a USB port, but i have yet to try such a feature.
I've had my Atrix plugged into my computer for roughly 3 hours now, and so far it's gone from 30% to 60%.
I wouldn't be the least bit concerned if it was charging slowly, it was actually lower after unplugging than it was when I plugged in, and no charge symbols appeared. But if I plugged it in the computer saw it and soon as I unplugged the message popped up saying low battery please reconnect charger, and when reconnected it went away.
But there was no charge symbol and under battery status it said discharging.
Now I just unplugged from wall charger (worked fine first time) and plugged back into laptop, its charging fine so hopefully it was a one time thing.
Ah, so thata what it is; I have had mine on here for a while now and im still at 60.
Rooted/ROM Captivate
Rooted Atrix
When i first plugged mine into my desktop computer, it wouldn't charge at all. I then installed that motosoftware that came with the phone and after it finished the phone started to charge, but very very slowly.
Every computer ive tried works fine.
But when i plug it into a wall charger(not one that came with atrix) it starts freaking out lol. "unplug to save energy!!" flash on & off 3/second...atrix charger works fine tho...lame
You need the driver off the motorola site to charge the phone from your computer.
Yea, computers work, monitors don't. I'm guessing that the USB hubs in monitors don't have enough juice, even though they did for my Aria.

Phone doesnt reliably charge when connected to PC

Anyone else notice the phone randomly doesnt charge when plugging it into the computer?
The battery will say charging, the lock screen will say charging, but the battery screen will say not charging and the graph will show a green charging line but draining battery. Replugging the phone in fixes it. I havent had an issue with the wall charger.
Theres nothing wrong with the USB ports, it charged my other phone fine and it charges this phone when it works.
my N4 charges fast when I plug it to my laptop. I connect it to my USB 3.0 port..
PCs aren't designed to charge phones. It may work for a dumbphone with a 500 mAh battery, but it doesn't have the amperage to charge a smartphone efficiently. The charging adapter that comes with the phone is 1200 mA (milliamps), a computer USB port only provides 500 mA (on USB 2.0). On USB 3.0, it provides 900 mA, so it will charge faster, but not nearly as fast still as the 1.2 amp travel adapter.
On top of this, the phone is constantly using battery power while on, so it is very likely that when the screen is on and you are using the phone plugged into the computer, the phone is drawing power faster than the computer is charging it.
MusicMan374 said:
PCs aren't designed to charge phones. It may work for a dumbphone with a 500 mAh battery, but it doesn't have the amperage to charge a smartphone efficiently. The charging adapter that comes with the phone is 1200 mA (milliamps), a computer USB port only provides 500 mA (on USB 2.0). On USB 3.0, it provides 900 mA, so it will charge faster, but not nearly as fast still as the 1.2 amp travel adapter.
On top of this, the phone is constantly using battery power while on, so it is very likely that when the screen is on and you are using the phone plugged into the computer, the phone is drawing power faster than the computer is charging it.
Click to expand...
Click to collapse
That is not what Im talking about. It says charging everywhere except the battery screen where it says not charging, that is obviously a bug. A computer can power a phone fine anyways, they are made to be powered by a USB port.
idividebyzero said:
That is not what Im talking about. It says charging everywhere except the battery screen where it says not charging, that is obviously a bug. A computer can power a phone fine anyways, they are made to be powered by a USB port.
Click to expand...
Click to collapse
Mine says charging and shows charge icon when connected via USB
idividebyzero said:
That is not what Im talking about. It says charging everywhere except the battery screen where it says not charging, that is obviously a bug. A computer can power a phone fine anyways, they are made to be powered by a USB port.
Click to expand...
Click to collapse
I had this problem today. The battery was dying fast (Average for this one) and I had popped it into my stereos USB, The battery didn't show the charging sign.
WTF? So I switched to the "Cigarette lighter port" and with a different cable plugged that in. No go. Held in the power button to simulate a battery pull, Still didnt work.
Turned it off, Went back to work and three hours later getting ready to drive home i plugged it in. The phone was getting warm, But the battery charging sign never popped up. I turned it on and the left side (By the sim card) was getting ultra-hot but betterbatterystats said the battery was only feeling at around 101degrees (Normal for this small sun). A minute later it was highly uncomfortable to hold (Just near the sim card area), I thought the battery was going to catch on fire like those youtube videos.
I power cycled once again, the battery charging sign popped up and I breathed a huge sigh of relief. Seconds later the phone ****ing flipped its wig, It kept making the charger plugged in sound and vibrate every half second. I about had a stroke, Thinking it's going critical. ONE MORE POWER CYCLE, Everything is normal.
My earlier experience seemed similar to yours OP, Let me know if your phone melts your hand off and goes all bi-polar like mine did.
I'm having the same problem. It has nothing to do with a computer not being powerful enough to charge it, especially when they aren't even being used such as overnight. It has charged every other smartphone that I've used. It will say that it is charging on the lockscreen and on the settings pulldown but it will just constantly drain battery. I will put it on the charger before bed and wake up 8 hours later and it says it is at 86% with a steady decline in battery. This only happens when connected to my iMac and not when plugged into a wall outlet.
I wouldn't think USB 3.0 improves the charging speed at all, since the protocol still uses USB 2.0
I just remove all the cables and replace them. It seems to solve it.
Same with the AC adapter. I noticed sometime it would say charging USB when I switched. I just unplug everything and plug it back in and it goes back to normal.
/shrug
I havent noticed it getting warm, it just doesnt charge even though it knows its plugged in and is supposed to be charging. It works after replugging it in.
It also seems to charge abnormally slowly.
I wonder if the issue with the phone not working right with Nokia chargers (constantly disconnects and reconnects) is related to this. It may not have anything to do with the Qi standard because the phone just doesnt charge right period.

[Q] Overnight: Charging to 100%, then discharging while still connected?

Hi there,
got a strange problem.
I plug in my N4 in the evening, it is loading up to 100% and there it begins to DISCHARGE (or in other words, stops to hold the battery at 100%) although still connected to the charger. In the morning I unplug the phone and have just around 70% left ... see attached screenshot.
Using stock charger and cable that came with the phone.
I hope this is not intended by Google? Running Android 4.2.1 Stock.
is this the only time it happened?
It is probably because of the charger. They definitely didn't include the best charger out there try another charger, you'll see improvements.
Sent from my Nexus 4 in a Faraday cage
KyraOfFire said:
It is probably because of the charger. They definitely didn't include the best charger out there try another charger, you'll see improvements.
Click to expand...
Click to collapse
Thanks! Used my equipment (powered USB hub with another micro USB cable) from old phone until yesterday, and read about charging problems when NOT using the charger and cable that came with the N4. To see if that is maybe the problem I therefore unpacked the "stock" cable and charger - but it didn't solve the problem.
The most strange thing is, that it charges perfectly up to 100%! I would expect then that it stops charging to avoid overloading, but that holds the charge level at 100% until unplugged. I think this logic is not within the charger, but controlled by the phone itself (Software / Hardware Unit)?
IINexusII said:
is this the only time it happened?
Click to expand...
Click to collapse
Have the N4 about 1 week now and I realized this happening at least 4 times now. I'm usually plugging it in every evening and unplug it in the morning.
Its intended as a safety measure so it doesn't over charge when its 100 percent.... It's always been that way
Sent from my Nexus 4 using xda premium
Locksmith81 said:
Its intended as a safety measure so it doesn't over charge when its 100 percent.... It's always been that way
Click to expand...
Click to collapse
Hmmm ... never experienced this 15 years mobile phones (at least 4 of them using Android and tons of different ROMs ...). What would be the purpose to plug in your phone in at 22pm, stop charging at 1am and begin the fresh day at 7am with again 30% loss of capacity? I would need to carry my charger stuff all day with me ...
As I said, I fully understand that it stops charging at 100% to avoid overloading - and also see the sense in this here -, but usually it should HOLD it at 99-100% until you unplug and not lose capacity while still connected to the charger.
Cheers
did you plug it into a USB hub that was plugged into a computer? that might be your problem. My N4 has issues charging from USB ports... it never holds charge properly.
This happened to me previously, ended up swapping my charger back to my Samsung OEM one and havent had the problem again.
Another time that this could happen is if you're charging via your USB port on your computer and you shutdown your computer which it will still show the charging icon but the status says not charging which could be changed by replugging the phone and/or having BIOS settings that enable usb power draw etc...
Just found this one ... maybe I'm not explaining my case very well, but it seems I am not alone ...
https://code.google.com/p/android/issues/detail?id=39919
beegbear said:
did you plug it into a USB hub that was plugged into a computer? that might be your problem. My N4 has issues charging from USB ports... it never holds charge properly.
Click to expand...
Click to collapse
UZ7 said:
This happened to me previously, ended up swapping my charger back to my Samsung OEM one and havent had the problem again.
Another time that this could happen is if you're charging via your USB port on your computer and you shutdown your computer which it will still show the charging icon but the status says not charging which could be changed by replugging the phone and/or having BIOS settings that enable usb power draw etc...
Click to expand...
Click to collapse
Yesterday I used the wall plug. All the years before I used a SEPARATELY POWERED usb hub. Even if the PC is shut, the hub provides power to the ports. Anyway, it doesn't matter - Charging is working perfectly on wall plug, usb hub, stock cable, non-stock cable ... before reaching 100% and phone disscharges. Picture in 1st post illustrates the disscharge while still "charging" (last bar at the bottom)
it's def. not normal. mine doesn't discharge, it can stay plugged in all night and it'll say 'CHARGED'
beegbear said:
it's def. not normal. mine doesn't discharge, it can stay plugged in all night and it'll say 'CHARGED'
Click to expand...
Click to collapse
Exactly what I would expect! Now that I found the others on code.google.com having the same issue I think there was a batch of devices having it and that I might need to RMA ...
Well the reason why I was mentioning the charger (unless you've tested another one) is because I was using the original LG oem charger and for a while it would give inaccurate readings on multiple occasions. Example being I woke up (used wall charger) and it said 70-80% and the charge icon was still there but on the status it said 'not charging'. Another time was when it said 96%, unplugged and replugged and it charged to 100%. Then I use the phone for a couple of seconds and it drops down percentage again 96%~ and when/if charged it will say 100% again (giving a false reading).
I was thinking it was the cord because I used my bro's LG charger and it charged the phone 96, 97, 98, 99, 100 and not 96 -> 100% therefore the cord may have been the problem. Went back to my Samsung OEM charger and it has been fine since then and never had any discharging.
Are you using stock kernel?
UZ7 said:
Well the reason why I was mentioning the charger (unless you've tested another one) is because I was using the original LG oem charger and for a while it would give inaccurate readings on multiple occasions. Example being I woke up (used wall charger) and it said 70-80% and the charge icon was still there but on the status it said 'not charging'. Another time was when it said 96%, unplugged and replugged and it charged to 100%. Then I use the phone for a couple of seconds and it drops down percentage again 96%~ and when/if charged it will say 100% again (giving a false reading).
I was thinking it was the cord because I used my bro's LG charger and it charged the phone 96, 97, 98, 99, 100 and not 96 -> 100% therefore the cord may have been the problem. Went back to my Samsung OEM charger and it has been fine since then and never had any discharging.
Are you using stock kernel?
Click to expand...
Click to collapse
I'm on 4.2.1 stock yes.
Thing is, that I'm not plugging it out! While being connected it suddenly starts to disscharge - Why the heck would you disscharge when you have a power source connected?! The "event" invoking the disscharge to me is the reach of 100%. Maybe this is a misbehavior of the overloading protection, to stop charging (as intended), but not restarting to charge at lets say 99% or 98% to get back to 100%. This would mean that when I'm using navigation in my car I would need to reconnectfrom time to time to trigger the charging again.
Traxter said:
I'm on 4.2.1 stock yes.
Thing is, that I'm not plugging it out! While being connected it suddenly starts to disscharge - Why the heck would you disscharge when you have a power source connected?! This would mean that when I'm using navigation in my car I would need to reconnect once and then to trigger the charging again.
Click to expand...
Click to collapse
Yeah I know what you mean but its odd that I had this problem as well but disappeared when I swapped.
As for my USB/PC, that charges when the computer is on and off but when I turn it off, I would have to replug the phone to get it started again as it will have the same "charging icon" w/o it actually charging. My guess is that if the power source loses its power, even if its temporary it will stop charging. But when I using my Skyrocket a few months back I never had to replug the phone onto my computer to get it charging again but I do know that the computer will temporarily cut off power when you shutdown and bring it back to charge plugged devices. (didnt change any power states in BIOS).
So most likely it is something with the phone but it could also be a setting or some software error triggering a fail-safe or something.
UZ7 said:
Yeah I know what you mean but its odd that I had this problem as well but disappeared when I swapped.
As for my USB/PC, that charges when the computer is on and off but when I turn it off, I would have to replug the phone to get it started again as it will have the same "charging icon" w/o it actually charging. My guess is that if the power source loses its power, even if its temporary it will stop charging. But when I using my Skyrocket a few months back I never had to replug the phone onto my computer to get it charging again but I do know that the computer will temporarily cut off power when you shutdown and bring it back to charge plugged devices. (didnt change any power states in BIOS).
So most likely it is something with the phone but it could also be a setting or some software error triggering a fail-safe or something.
Click to expand...
Click to collapse
I see definitely some issues in the charging logic in both of our cases here. You shouldn't have to replug your phone if you send your PC to sleep, as long as it still outputs the USB power. Since I would not expect the decision to charge or not to charge in the wall plug or in the USB hubs, I can only hope it is not a hardware problem of the charging electonic, but a software problem which could be patched. Also wouldn't I wonder if this has to do with the wireless charging option of the phone ...
come to think of it i had the same problem. charging from the PC when off via USB it would do the same thing as OP. charging through the wall works fine.
Well just found out I am maybe reposting the issue as I didn't find this initially ... similar (or same?) problem described here: http://forum.xda-developers.com/showthread.php?t=2031246

Categories

Resources