so i installed the hspl and unblocked the phone, then after that i ran the custom RUU and installed the new ROM. From my desktop i copied the android file "mattcfroyosense1.7ppp" into my storage card then ran clrcd then the Haret. I was told to expect the installation of the new O.S to take about 10 minutes but my HD2 is taking forever. Its been 3 hours and its still on the black screen with the white code moving slow. please help if you have some info that could help
hm, this sound like my problem: but sometimes I can start a build one time.
after rebooting it taked forever.
what did not fix the problem for me:
reinstall hspl
different radios
different roms
different sd-cards
several hard-resets
different android builds
...
Related
ok since i got this phone i have had problems,but i updated it to 6.1 and it got better (locking up all the time)then i played with a bunch of custom roms,then the other day it just decided not to turn on at all,before it would just lock up at the htc screen,now when i turn it on the green light is on and nothing happnes?? i force it in the loader screen and have tryed getting it to take a rom that way and it just gets stuck and says loading but dosnt do anything? the update utilitly does not work either it keeps saying image is currupt?
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Hope it helped and good luck,
What version bootloader do you have? What image are you trying to load in bootloader.
i have opilo_240. i cant load any image nothing will take,no roms no radio no nothing
Are you sure you are naming it correctly and on a 2GB or less FAT32 sd card.
i have tryed it a million times, yes i have been typing it right.it recognizes it and starts to load it but then locks up. is there a way i can get this loader off the phone and take it back to original? maybe the loader is crap so if i try and put a original loader back in it will take a install again but i cant find any thing
Not possible that I know of to change bootloader without softspl which needs WM to run.
Where are you getting these images? What is your provider. Please update this in your profile so we can help easier.
my provider is metro pcs but its a sprint phone,i have tryed the sprint/htc 6.1 update then i tryed a couple of ryan mogul 6.5 roms.see since i got this phone (used) it had problems loading from the htc screen,sometimes i would have to soft reset about 5 times before it would load the o/s then sometimes it would go days without a problem,it did this with the stock image then got better with the 6.1 and thought it was good then i played with a couple roms and they all loaded ok but the phone was getting worse when locking up it would do it all the time,then i went back to the 6.1 sprint rom and it didnt get better just worse,then it wouldnt get past the htc screen,so i tryed again to put back to stock and now when i turned the phone on it vibrates then just the green light turns on,when i try and hard reset it just instantly says complete,i can boat to loader and connect to pc fine but when i try and load a image from cpu it goes to 1% then stops and says image file is corrupt, is my phone junk? i have a brand new touch pro coming today but i would like to get this mogul up and running its just a shame cause i loved this phone when it worked,im ready to throw it in the garbage
Get the .nbh from the following sprint .exe and try it on the sd card. If you can get into bootloader your phone shouldnt be a brick. Mtty might be an option but that isnt something I can teach you how to do very well.
ftp://ppcgeeks.com/Titan/CarrierRom..._RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe
I've currently installed the latest HSPL (2.08.HSPL) and it haven't fixed my issues.
Most of the time, my phone shuts down and powers up and it freezes or it vibrates 3 times and freezes. Some times it will turn on and freeze and infinite vibrating. Some times when I'm using Opera, it will just shutdown and freeze on boot.
It have to be the OS, but I just installed GingerBread 2.3.2_V7 but it still freezes and crashes.
Any help?
Thank you.
Try reinstall HSPL 2.08
Do it through bootloader mode/tri color screen remember
Then perform a task 29
Reinstall a radio for your TMOUS HD2, that is compatible with MAGLDR or HSPL.
Then install winmo or MAGLDR. Through tri color screen also.
Or it might be your sd card, Iunno, i've been reading some sd cards freeze the device. So you might as well format your sd card with panasonic formatter. Full format btw.
simon_66 said:
I've currently installed the latest HSPL (2.08.HSPL) and it haven't fixed my issues.
Most of the time, my phone shuts down and powers up and it freezes or it vibrates 3 times and freezes. Some times it will turn on and freeze and infinite vibrating. Some times when I'm using Opera, it will just shutdown and freeze on boot.
It have to be the OS, but I just installed GingerBread 2.3.2_V7 but it still freezes and crashes.
Any help?
Thank you.
Click to expand...
Click to collapse
I think you downloaded and copied a sd Card build to your phone. If it was a NAND ROM you would not have thois problem, plus I just did a search on GingerBread 2.3.2_V7 in the Andriod section for the HD2 and it only pulled up a biuld called "PPC-SHIFTPDA GingerBread 2.3.2 V7 & Desire HD Sense Glass V2", and this is a sd card build. looks like a very nice one too. Click on the link to comfirm that this is correct ass it should take you to the thread on that build.
You can do two things, either try uninstalling the last couple of apps you have resently installed most recent to least recent.This might solve your problem as it might be an app causing the issue.
The other is to do a Hard Reset of your HD2. Now make sure to move anything you want to save like pictures, videos, documents, etc. to your sd card or back them up on a computer first. also use Mycrosoft My Phone or a comprabale app to back up your contacts, favorites, text messages, ect. Cause this will revert your HD2 to like it was fresh brand new fresh out the box. Any way my sugestion to you is to do a Hard Reset of your HD2. tTo do this cut your HD2 off. then hold down the volume up and down buttons and the power button at the same time until you see the tri color screen. once it comes upo press the volume up button and the your HD2 will reset to factory setting.
Now after you do the reset don't just try to reload all of your apps at once.I suggest you do a soft reset(turn phone off for 20 secounds and turn back on) after ever app you reinstall. Reinstalling all your apps at once can cause your HD2 to freeze up on the first reboot of the phone because it is overloaded with the task of making all the needed changes at once using up all of it's CPU resources.This sould resolve your issue.
I did a task 29 and installed WinMo
I still get the 7 vibrate thing on boot. I've found that it only does this when the phone is hot. Is this an error found in every HTC HD2 TMOUS model or is it just me?
Thank you
For this entire week I’ve been attempting to convert my HD2 to an Android. I’ve managed to download HSPL3 and install it. I also installed Energy Leo. Than I downloaded (HD2Froyo_V3.7z) and put the files on a brand new SD Mini card formatted fat32.
The phone ran great, until I lost signal and I had to reboot the phone. When it started back up I tried following the same procedure to run Android and screen (Booting Lenix) comes up followed by green hTc logo and it stays there for ever. So far I’ve waited for as long as 20min but nothing happens.
Help!!!!!!!
If your phone won't boot beyond the htc logo, it is because it can't find the operating system to boot. It's like a computer without a hard drive - the bios will run but there's nothing further that will happen.
So without me reading about the android rom you switched to, I would suggest reinstalling the os. If you haven't yet, I suggest reading up on what Magldr can do - read the forums, read installation instructions on other roms, read the threads to find common problems and see how comfortable you are with them.
Sent from my HTC HD2 using XDA App
Hi, xda-community
I have been using Android NAND for a long time and today I decided to change back to WP7 again. ( I got it fully working few months ago)
The Problem
WP7 boots normally. BUT
1. The browser doesn't work (Doesn't load websites though Internet is working) and after ~3 starts it won't start anymore (Softreset won't help.. It's dead)
2. Emails will be downloaded but when clicking the write new mail button or when trying to open a mail it will force close.
3. Apps from Marketplace will donwload but get stuck at installing screen.
These problems can't be ROM-dependent cause i tried 5 different roms and got the exact same error everytime.
I formatted my SD-Card. I have MAGLDR 1.13 and 2.15..... Radio.
And as mentioned above I got WP7 fully working on the same SD-Card some time ago.
During the flashing process there has never been any problem.
To all the more experienced users out there please help me !!!
Friendly, Consti
did you hard reset after WP7 installed?
and use this ROM
http://forum.xda-developers.com/showthread.php?t=1236027
Thx mate,
No actually I didn't hard reset yet! Excellent idea, I'll just try that and write back (and I'll try the ROM)
EDIT: None of the above worked. I got stuck at boot screen with XbMod Rom...
EDIT: YOUR BLOODY ROM IS WORKING!!!!
To Everybody with similiar problems: In MAGLDR go to "10 Services" and set "Use 24 Last NAND" or something.. then "Clear MSDR" or something ;D It worked for me now
Hi Guys,
my HD2 restarts again and again after the WP7 boot logo appears for 10 or 15 seconds. I've installted the XBmod-Yuki rom (WP7 8107 with SP1) last January and ever since my phone was working perfectly until yesterday. I had to shut it down in the lunchtime and as I wanted to boot in the evening it began to restart every time after the boot logo.
The battery is fine and and can be fully loaded after removing the SD-card. I've searched for the problem already, but couldn't find a similiar problem. In most problem descriptions the battery seems to be too low to boot, but my one is OK. Have anybody an idea to fix the problem?
kind of the same problem
my hd2 restart like every 10 minutes again and again i haven't found nothing to do , therefore i gonna reinstall
trillitralli said:
Hi Guys,
my HD2 restarts again and again after the WP7 boot logo appears for 10 or 15 seconds. I've installted the XBmod-Yuki rom (WP7 8107 with SP1) last January and ever since my phone was working perfectly until yesterday. I had to shut it down in the lunchtime and as I wanted to boot in the evening it began to restart every time after the boot logo.
The battery is fine and and can be fully loaded after removing the SD-card. I've searched for the problem already, but couldn't find a similiar problem. In most problem descriptions the battery seems to be too low to boot, but my one is OK. Have anybody an idea to fix the problem?
Click to expand...
Click to collapse
have you tried to boot without the microSD card ? if it boots it will say missing card or smth like that. than turn phone off and try again with the card on.
andres1112 said:
my hd2 restart like every 10 minutes again and again i haven't found nothing to do , therefore i gonna reinstall
Click to expand...
Click to collapse
you either have the new DFT ROM with touch screen driver problem or you have microSD card problems (card not compatible with WP7)
Sounds like you are suffering from some bad sectors... :-( You could try to reinstall using different SD-card and see if the problem persists. If not then the old SD-card was the troublemaker If not then you have bad sectors onboard which is a bit of trouble!
Of course there are other explanations but bad sectors is common on the HD2 or at least starting to become that :-(
/Anders
the sd card looks to work good(well it restart constantly but and it starts normally) but however sometimes when it restarts, it show up a warning saying"MEMORY CARD NOT WORKING your memory card changed, is damaged or is non-compatible........." so should i change my card or there wil be anothe way to fix it?
HD2O 2.00b3 WP7 8773 wp7
andres1112 said:
the sd card looks to work good(well it restart constantly but and it starts normally) but however sometimes when it restarts, it show up a warning saying"MEMORY CARD NOT WORKING your memory card changed, is damaged or is non-compatible........." so should i change my card or there wil be anothe way to fix it?
HD2O 2.00b3 WP7 8773 wp7
Click to expand...
Click to collapse
well it seems you need a compatible sd card because not all of them are compatible with wp7 and give you random reboots, it is a known problem. read a little bit here : http://forum.xda-developers.com/showthread.php?t=912904&highlight=compatible+sd