[Solved] T-Mobile OTA My touch 3G Update Files 1, 2 and 3 (?). - myTouch 3G, Magic General

File 1 http://android.clients.google.com/packages/ota/tmobile_opal/894fb8631db9.hboot-1.33.0013.opal.zip
File 2 https://android.clients.google.com/...59adc603a3.signed-opal-ota-60505.e059adc6.zip
File 3 (Still Not sure what this file is)
https://android.clients.google.com/...17d.signed-opal-FRG83-from-DMD64.e3671133.zip
Here are the correct downloads. This update only works on the Original My Touch 3G. Not the My Touch 3G 3.5 or Fender Version.
I took these instructions from Smapdi's Post
Renamed 894fb8631db9.hboot-1.33.0013.opal.zip to update.zip and placed it into the root of my SD card. Rebooted into recovery and flashed it (Turn on with Home then Power Key to boot into recovery). The process restarted the phone a few times (DO NOT TOUCH THE THING ONCE YOU START THE FLASH!!!!!) and eventually booted into 1.6.
I rebooted into fastboot and saw HBOOT was now 1.33.0013 :-D
I then took e059adc603a3.signed-opal-ota-60505.e059adc6.zip and renamed it to update.zip and put it into the root of the SD card deleting the previous file. Repeated the same steps as before and the phone did the whole restart itself a few times thing and eventually booted to 2.2!!!
Great work guys!
Thanks for everyones help I hope you enjoy Froyo 2.2.
Stingerrray

Stingerrray said:
File 1 (I Think) https://android.clients.google.com/...17d.signed-opal-FRG83-from-DMD64.e3671133.zip
File 2 (I Know) https://android.clients.google.com/...59adc603a3.signed-opal-ota-60505.e059adc6.zip
The downloads worked for me can someone confirm that theses are the correct files. And maybe help with installation.
Thanks "Phateless"
Stingerrray
Click to expand...
Click to collapse
I do concur, the Philly Cheese Steak is quite delicious, however I find that nothing beats a good Cheeseburger!

Which one is which?
And do they need to be flashed in a specific order?

File one is new. File 2 is the one that has been out for a couple of days. I'm not sure on the install will test soon.

Stingerrray said:
File one is new. File 2 is the one that has been out for a couple of days. I'm not sure on the install will test soon.
Click to expand...
Click to collapse
ill go ahead and test this aswell, so tech i should flash file 2 then file 1 since that is the order they were released in?

Foo_Blyat said:
ill go ahead and test this aswell, so tech i should flash file 2 then file 1 since that is the order they were released in?
Click to expand...
Click to collapse
actually the I believe the first file is the spl and would be flashed first. Be careful.

XfooYen said:
actually the I believe the first file is the spl and would be flashed first. Be careful.
Click to expand...
Click to collapse
i thought file 1 should be flashed first aswell but to me it looked like the 2.2.1 update since theres a "FRG84-from-DMD64" line in the code.
anyone else care to maybe back that assumption up or throw in your own 2 cents, wouldnt mind a few opinions before i flash these files.
Both downloaded, both have been put onto the root of my sdcard. Just waiting on a guiding light before i boot into stock recovery and flash

I also have the files ready but I dont have the guts to flash. I barely use the MT3G lately but I dont want to risk a brick.

negative
Good news is the phone doesn't brick after trying to flash the first file. Bad news is it comes across an error. Apparently this is for a different phone. I got the error "E:Error in /sdcard/update.zip (Status 7)" with a bunch of other gibberish about buildprops before it ..
hope this helps someone ..

has anyone tested these file yet with success?

PulldOvr said:
Good news is the phone doesn't brick after trying to flash the first file. Bad news is it comes across an error. Apparently this is for a different phone. I got the error "E:Error in /sdcard/update.zip (Status 7)" with a bunch of other gibberish about buildprops before it ..
hope this helps someone ..
Click to expand...
Click to collapse
if your sig is correct, you are in the wrong forums, no **** its "apparently for a different phone"

PulldOvr said:
Good news is the phone doesn't brick after trying to flash the first file. Bad news is it comes across an error. Apparently this is for a different phone. I got the error "E:Error in /sdcard/update.zip (Status 7)" with a bunch of other gibberish about buildprops before it ..
hope this helps someone ..
Click to expand...
Click to collapse
I got the same error message and installation aborted. I tried file #2 first. Rebooted and went back to normal. Mytouch 3g stock.....
Same thing happened when I flashed #1 .....

Foo_Blyat said:
if your sig is correct, you are in the wrong forums, no **** its "apparently for a different phone"
Click to expand...
Click to collapse
Before you continue being an ass had you thought about he is someone that upgraded from a mytouch 3g to a vibrant and still has his old mytouch? That is exactly what I did and I am still trying to update my mytouch.

Foo_Blyat said:
if your sig is correct, you are in the wrong forums, no **** its "apparently for a different phone"
Click to expand...
Click to collapse
My Vibrant runs off MT3G roms ...
On a serious note .. I have an original MyTouch 3g, a Cliq, a G1, and a Vibrant ... usually just lurk around these forums and try not to intervene too much because people are quick to become trolls on this site .. then they complain when no one will help them .. gee i wonder why ... learn to be a little nicer, and maybe we can get some work accomplished as a whole ...
and just to clarify, I tested this on an original MyTouch 3g, 1.33.006 SPL, (stock) and unrooted DMD64 build.
This made me think that a "...*** from DMD646" update file would work. I'll be sure to keep my testing to myself so i can avoid trolls like you.

Don't get your panties in a bunch...
I already tried 1.5 -> 2.2.1 and both builds of 1.6 -> 2.2.1, doesn't work in any order

I've tried to update with both files no luck. They are definitly part of the update. I did notice from an earlier post with photos that one file was looking to the system cache file for the other file. So just a thought maybe both files need to be in place before the update can take place. Maybe this could be the problem. Any thoughts on this?
Stingerrray
Sent from my T-Mobile G2 using XDA App

I thought that the first update was supposed to be 300-400kb? Where did you discover this link out of curiosity?

I saw the file name in another post with a view of a botched upgrade due to root. put the file name in the url for the other update and it was a valid url.
Sting
Sent from my T-Mobile G2 using XDA App

The post was here.
http://forum.xda-developers.com/showpost.php?p=8687201&postcount=175

First off any time you want to test if a file is legit or not ( coming from htc/google ) you can just test the keystore via command prompt if the java development kit and runtime is in your system path. Don't remember the code off hand.
Second I would really suggest either using someone elses update script or at least replace/delete most of it. As well as install su and busybox. Because it won't run in a custom recovery.
Enjoy if you can!

Related

flashed 2.1 ruu anyway to fake sprint signature on update.zip?

So I went ahead and just did it ran the ruu. So i been trying ways to unroot this as much as my not so experienced self is. Well first i tried to replace the rom.zip with an older one as if that was done it would be the easiest way. well replaced it but it didn't successfully flash once it got to the flash bootloader part. Then I booted to recovery and first thing it said was E:can't archive /cache/recovery/command. So I tried to apply update.zip it started to go through but got a signature failure. Anyways any help with this would be great
new pri 2.20_003
thatguythatdid said:
So I went ahead and just did it ran the ruu. So i been trying ways to unroot this as much as my not so experienced self is. Well first i tried to replace the rom.zip with an older one as if that was done it would be the easiest way. well replaced it but it didn't successfully flash once it got to the flash bootloader part. Then I booted to recovery and first thing it said was E:can't archive /cache/recovery/command. So I tried to apply update.zip it started to go through but got a signature failure. Anyways any help with this would be great
new pri 2.20_003
Click to expand...
Click to collapse
Throw it into the toilet and get a warranty replacement quick, before all the phones have 2.1.
Other then that, the only way to find root would be to have a good knowledge of linux, kernels, c, etc, and find known linux exploits and go down the list and try them.
robchaos said:
Throw it into the toilet and get a warranty replacement quick, before all the phones have 2.1.
Other then that, the only way to find root would be to have a good knowledge of linux, kernels, c, etc, and find known linux exploits and go down the list and try them.
Click to expand...
Click to collapse
I'm getting a new one today from craigslist so if I never post again then I'll be one of those when craigslist goes wrong stories on the news.
Also I never got the warranty from sprint I got the warranty from radioshack because they said that they cover everything but water damage. So right before I threw it off my roof I called radioshack to make sure they would cover it they said they only cover wear and tear and software.
I still would like to know how to make an sign an update zip though so I can flash it through recovery.
thatguythatdid said:
I'm getting a new one today from craigslist so if I never post again then I'll be one of those when craigslist goes wrong stories on the news.
Also I never got the warranty from sprint I got the warranty from radioshack because they said that they cover everything but water damage. So right before I threw it off my roof I called radioshack to make sure they would cover it they said they only cover wear and tear and software.
I still would like to know how to make an sign an update zip though so I can flash it through recovery.
Click to expand...
Click to collapse
First of all, do you have mac or windows?
Doesn't matter, The RUU removes root and the ability to flash a custom recovery, doesn't it?
HeroMeng said:
First of all, do you have mac or windows?
Click to expand...
Click to collapse
Sorry messing with the phone. I got a pc windows 7 64 blah blah. I did try to manual update but it wont let me because it says that main version is older.
robchaos said:
Doesn't matter, The RUU removes root and the ability to flash a custom recovery, doesn't it?
Click to expand...
Click to collapse
Yes and no. While in the new recovery it gives you the ability to flash an update zip from your sd but I get signature fails if I could fake the signature then I could flash a rooted rom and carry out from there putting a new recovery image and so fourth
thatguythatdid said:
Yes and no. While in the new recovery it gives you the ability to flash an update zip from your sd but I get signature fails if I could fake the signature then I could flash a rooted rom and carry out from there putting a new recovery image and so fourth
Click to expand...
Click to collapse
What happens if you try flashing any of the released roms out there, like fresh rom? It is signed using test keys. That would be crazy if the new recovery lets you flash any signed rom, but I predict it's locked down to HTC's keys which are privately encrypted keys. You can't fake them.
flipzmode said:
What happens if you try flashing any of the released roms out there, like fresh rom? It is signed using test keys. That would be crazy if the new recovery lets you flash any signed rom, but I predict it's locked down to HTC's keys which are privately encrypted keys. You can't fake them.
Click to expand...
Click to collapse
I've tried only tried a couple so far it takes a sec though cuz I gotta reboot to put anything on and I'll try the fresh 2.0d
Justg tried the original fresh 2.od and got signature verification failed
Going to pick up my new phone so if any body has anyideas on how to root this when I get back let me know. When we gonna get a leak that lets you sign with htcs keys
thatguythatdid said:
Going to pick up my new phone so if any body has anyideas on how to root this when I get back let me know. When we gonna get a leak that lets you sign with htcs keys
Click to expand...
Click to collapse
It should be 1.5, so just root it w/ http://forum.xda-developers.com/showthread.php?t=583291 and you'll be good to go.
thatguythatdid said:
Going to pick up my new phone so if any body has anyideas on how to root this when I get back let me know. When we gonna get a leak that lets you sign with htcs keys
Click to expand...
Click to collapse
i may be crazy.... but if we find a way to root this 2.1 before they release it couldn't they then patch that exploit? maybe this is why they "leaked" it so we could have a chance to find any holes or exploits in the software/bootloader/recovery?
regaw_leinad said:
It should be 1.5, so just root it w/ http://forum.xda-developers.com/showthread.php?t=583291 and you'll be good to go.
Click to expand...
Click to collapse
I meant the one with the 2.1 on it
thedudejdog said:
i may be crazy.... but if we find a way to root this 2.1 before they release it couldn't they then patch that exploit? maybe this is why they "leaked" it so we could have a chance to find any holes or exploits in the software/bootloader/recovery?
Click to expand...
Click to collapse
you may be right I thought of it but I don't know how clever they are considering how long it's taken them to put out the same rom we had back in march
thatguythatdid said:
I meant the one with the 2.1 on it
Click to expand...
Click to collapse
Oh, sorry my bad
regaw_leinad said:
Oh, sorry my bad
Click to expand...
Click to collapse
No problem . I'm glad that devs are looking at this maybe we can have a solution before the problem
sandboxlove said:
so the new recovery lets you flash updates? their just asking for us to better their software, jesus...
Click to expand...
Click to collapse
What like their gonna do it? I heard the ssamsung 2.1 update didn't even have live wallpapers
go to cyanogens wiki page. and find where he manually replaces the /radio partition.
if you have fastboot you can manually replace every partition this way. including /recovery.
just an idea.
Avalaunchmods said:
go to cyanogens wiki page. and find where he manually replaces the /radio partition.
if you have fastboot you can manually replace every partition this way. including /recovery.
just an idea.
Click to expand...
Click to collapse
Thanks for the idea just got my new phone still got the old one so I'm definitley gonna try some things now. Before I root the new one is there any info or anything someone might want from it. I don't know if it can help someone but it might. I'll wait till tonight to do it
Avalaunchmods said:
go to cyanogens wiki page. and find where he manually replaces the /radio partition.
if you have fastboot you can manually replace every partition this way. including /recovery.
just an idea.
Click to expand...
Click to collapse
Sweet link bro!

Up shat creek

Did the 1 click root successful and loaded up cyanogen 6 and then tried thinking I was a big dog and screwed around and f'd up my phone,it won't get past any of the recovery screens,I will link what I have gone through over at nof.net,sorry for the link but I suck at typing because it takes me forever so please read,also I will paypal 20 bucks who can get me out of this debacle. Thanks.
oops can't link cause I'm new but If you are kind enough to go to nexusoneforums.net and read it ,It's titled In deep doodoo.
Basically it won't boot past the x no matter what i do,but I can see everything is still on my memory card through my laptop
direct link to his post
http://www.nexusoneforum.net/forum/nexus-one-development-hacking/8483-deep-doodoo.html
thank you
10 char
I think you need to locate a stock, signed update zip file and put it on your sd card. I'd do this seperate from the phone. Take the card out and put it in your laptop or whatever you have to read it.
I'd then get back to where your were on page four of your other thread where it says apply update zip.
you don't know if you have the stock recovery img still? or Ra or clockwork?
your phone isn't broke, I wouldn't worry too much.
You also don't know if you bootloader is unlocked or not?
heres frf91 full if you choose to go this route http://www.mediafire.com/?xniymzimojg
Stock ROM's here: http://www.mediafire.com/n1passion
Sounds to me like you need to relax a little and read a bit more before jumping in with both feet... Rooting isn't necessarily for everyone.
I won't ever ever attempt this again.
Macklessdaddy said:
I won't ever ever attempt this again.
Click to expand...
Click to collapse
ahh don't do that! I don't even want to begin to count how many bootloops I've had, I'm pretty sure I've seen more of that X than I have of my home screen. I think once you've messed up once and had someone help you to fix it it kinda implants into your head how to fix it in the future. My only advice for future attempts is to Nandroid backup (make sure you have atleast 1 sure working back up, then do further updated back ups along side it)
Can someone tell me which file I need in post #5 for a tmobile n1.Thanks
http://www.mediafire.com/?xniymzimojg
jbrinkley,I downloaded the file and put it on the memory card,but I'm still getting the same x screen,anything else I can try.
I won't ever ever attempt this again.
Click to expand...
Click to collapse
The only way to master something is through multiple failures
Sent from my Nexus One using XDA App
Somebody help me,I had no clue this phone meant so much to me.
wrench115 said:
The only way to master something is through multiple failures
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I don't want to fail with my phone.Trust me when and If I get it working I will stay in my lane and leave the rooting to you guys.
Flashing back to thw original stock rom should fix it there's a link posted above. Atleast it worked when I had a g1 and royally screwed up. I would try that first.
Sent from my Nexus One using XDA App
I cant,or obviously don't know how to flash back to the original rom.Don't mean to sound ungrateful but it appears nobody is reading about the problem I'm having ,again I'm stuck at the x and can't get out.
I will paypal 20 bucks to the person who helps me out of this mess
OK, relax... take a deep breath... and try this out...
1. Download a full ROM zip (e.g. Passion-EPE54B.zip) from http://mediafire.com/n1passion
2. Pop out your SD card and pop that zip onto your SD card, be sure to rename it to PASSIMG.zip
3. Boot into bootloader mode (power off -> trackball + power)
4. The phone should pick up the PASSIMG.zip and ask you if you would like to update it... select yes!!
This will restore you to the stock EPE54B image, you can then download the FRF91 OTA or re-root you phone...
Craig,I downloaded the file from post#9 and renamed it PASSIMG.zip and went to bootloader and the x came up again,do I need to use the 54 one you were talking about to get to 91,sorry but I'm smartphone illiterate as hell.I get a message that says no image or wrong image
If I try to apply sd card update I get this message
failed to open\sdcard\update.zip(no such file or directory)
E signature verification failed
Installation aborted
Does it matter where on the memory card the file is at?
what we don't know is what recovery you have, if you bootloader is unlocked or not.
I don't know anything about that one click method. if you have a nandroid file on you sd look in there and see if you have actual backups.
and now i can't remember if you got to the restore menu or not.
jbrinkley said:
what we don't know is what recovery you have, if you bootloader is unlocked or not.
I don't know anything about that one click method. if you have a nandroid file on you sd look in there and see if you have actual backups.
and now i can't remember if you got to the restore menu or not.
Click to expand...
Click to collapse
bootloader not locked,under clockwork mod I see recovery and there is 3 backups under recovery

( GUIDE ) Custom SPLASH1 on CDMA Desire.

I'M BEING VERY CLEAR HERE-THIS IS FOR CDMA DESIRE ONLY, NOT GSM!!!
You have to be S-OFF to do this.
Because the CDMA desire does not have extended fastboot yet, this is the only way to change the ( white with green HTC ) screen to a custom splash1 ( anything you want ) screen.
Giving credit where its due, I'd like to thank:
Team unrevoked for S_OFF
MRE-net for his guide with the .img converter tool and half of his how to that I was able to use, I will put his link in here.
ipfreelytech for his encouragement and unknowingly pointing me in a direction that made sense.
The only part I played in this is bringing these together and finding the right way to create the .txt file.
If I missed anyone, feel free to point it out.
I'm going to make this quick and simple but explain in detail so no one should have a problem but not to where you have zero legwork yourself; it took me 3 weeks to figure this out.
Requirements: my android-info.txt file
MRE-net's nbimg coverter tool
And whatever flavor archiver tool to make the .zip
Download this-[URL=http://www.4shared.com/document/ymcXsiz-/android-info.html]android-info.txt[/URL]
Go to this link http://forum.xda-developers.com/showthread.php?t=795132,
download NBIMG command-line splash<-->image converter tool for your platform, read how to use the nbimg tool in command prompt ( extremely easy ). Read his how to thoroughly but PAY NO ATTENTION TO THE FASTBOOT PORTION!!!!!!!!!! Basically don't bother past #8.
Now, after you have converted it with nbimg tool, you want to zip up the android-info.txt and the splash1.img you created together and name it PB99IMG.zip ( exactly how I have it underlined ) and place it on the root of your sdcard. Reboot into booloader ( which on my phone the screen goes straight to fastboot ) the fastboot screen has the word FASTBOOT highlighted in RED, and below it a little, BOOTLOADER is highlighted in BLUE. If thats what you see then hit the power button once and you should see HBOOT highlighted in BLUE under the phone info. Give it a few seconds ( 10-15 ) and you should see this:
Parsing...(SD ZIP)
(1) SPLASH1
Do you want to start update?
<VOL UP> Yes
<VOL DOWN> No
You want to hit vol up obviously and when you do it happens very quick, almost instant and then hit vol up again to reboot and BAM, you should see your new SPLASH!!!!!!
Now for those who this didn't work for, its NOT the .txt file. More than likely its a bad archive or you didn't do the image right, so I don't want a lot of negative feedback because people can't figure it out. I have changed mine a couple times before I wrote this up, WORKS GREAT!!!!!!!!!
Note: If your baseband differs from the mainver: in the .txt file then edit it to what yours is before you make the .zip or it wont work.
ENJOY GUYS!!!!!!!!!!!
why this long and complicated way?
can you not just convert it to img and then do
fastboot flash splash imagename.img ?
also there is a one click tool that will convert 24bit bmp to image and auto flash your device here
http://forum.xda-developers.com/showthread.php?t=794638
i thought this worked on both gsm and cdma desires with s-off
EDIT: can you use extended fastboot commands with cdma unrevoked s-off?
Rastaman-FB said:
why this long and complicated way?
can you not just convert it to img and then do
fastboot flash splash imagename.img ?
also there is a one click tool that will convert 24bit bmp to image and auto flash your device here
http://forum.xda-developers.com/showthread.php?t=794638
i thought this worked on both gsm and cdma desires with s-off
EDIT: can you use extended fastboot commands with cdma unrevoked s-off?
Click to expand...
Click to collapse
So far nothing else worked on cdma. The tool or manual commands. I'm going to try this out after work. Thanks for finding this!
Definatly going to give this a shot after work as well. Thanks for figuring this out.
Rastaman-FB said:
why this long and complicated way?
can you not just convert it to img and then do
fastboot flash splash imagename.img ?
also there is a one click tool that will convert 24bit bmp to image and auto flash your device here
http://forum.xda-developers.com/showthread.php?t=794638
i thought this worked on both gsm and cdma desires with s-off
EDIT: can you use extended fastboot commands with cdma unrevoked s-off?
Click to expand...
Click to collapse
Currently the CDMA Desire does not have extended fastboot commands, despite having s-off. The Alpharev team is working on getting it working so this is our only method available for now
It totally works! Thanks lohp75 for doubting me when I said it couldn't be done lol
Like I said bud, doubt creates possibilities .
Sent from my HTC Desire CDMA using XDA App
heavymetalmage said:
Currently the CDMA Desire does not have extended fastboot commands, despite having s-off. The Alpharev team is working on getting it working so this is our only method available for now
Click to expand...
Click to collapse
my bad mate, as you had s-off i assumed they would have included extended fastboot commands
AWESOME!!!! very easy to do just sounds difficult. thanks for getting it working and posting for us all!
You guys are very welcome :+). Its good that I am able to contribute back to the community instead of being a full time mooch . And like I said in the post, I detailed it so everyone should understand how to do it, but it will be so much easier when extended fastboot comes available to us!
Sent from my HTC Desire CDMA using XDA App
Ok I have followed this guide exactly.. I have done and re done the picture in Photoshop, tried converting it with several file converters, and they all get the same result...
That is the file I made.. I changed the baseband to coinside with my device (US Cellular HTC Desire)..
And it completely refuses to flash the zip. There are some error messages that pop up VERY quick, what I can see, says no image in zip.. but its there... converted with the tool...
Any ideas???
Well bud, the only problem I saw with it is you must not be s-off. If that's the case then go to unrevoked.com and get what you need for your phone. I looked in your zip and for ****s and giggles flashed it to my phone and it worked as smoothly as mine does. Of course I had to flash back to mine. So your zip is good.
Cythrawl said:
Ok I have followed this guide exactly.. I have done and re done the picture in Photoshop, tried converting it with several file converters, and they all get the same result...
That is the file I made.. I changed the baseband to coinside with my device (US Cellular HTC Desire)..
And it completely refuses to flash the zip. There are some error messages that pop up VERY quick, what I can see, says no image in zip.. but its there... converted with the tool...
Any ideas???
Click to expand...
Click to collapse
Sent from my HTC Desire CDMA using XDA App
good job! I knew this would work, glad you figured it out. Rocking a custom splash on my phone now
lohp75 said:
Well bud, the only problem I saw with it is you must not be s-off. If that's the case then go to unrevoked.com and get what you need for your phone. I looked in your zip and for ****s and giggles flashed it to my phone and it worked as smoothly as mine does. Of course I had to flash back to mine. So your zip is good.
Sent from my HTC Desire CDMA using XDA App
Click to expand...
Click to collapse
Yes its S-Off.... I have Cyanogen Mod on it... I can do everything else except change the boot splash...... I am at a loss why it's not working for me.... Followed the guide exactly...
EDIT::: Just tried the Unrevoked FOrever patch too.. still the same issue....
This is what the Bootloader says:
BRAVOC DVT2 SHIP S-OFF
HBOOT-0.98.0000
MICROP-051e
TOUCH PANEL-SYNW0101
RADIO-2.05.10.06.29
Jul 5 2010, 19:14:11
Everything seems right and correct... Oh well... I give up...
Does it give you the option to update, or does it flash a bunch of crap real quick then back to hboot? Maybe try and redownload my original. txt file and don't modify it at all, zip it up and try again. I was able to flash yours without changing the mainver: surprisingly.
And the unrevoked that you did was through recovery right?
Cythrawl said:
Yes its S-Off.... I have Cyanogen Mod on it... I can do everything else except change the boot splash...... I am at a loss why it's not working for me.... Followed the guide exactly...
EDIT::: Just tried the Unrevoked FOrever patch too.. still the same issue....
This is what the Bootloader says:
BRAVOC DVT2 SHIP S-OFF
HBOOT-0.98.0000
MICROP-051e
TOUCH PANEL-SYNW0101
RADIO-2.05.10.06.29
Jul 5 2010, 19:14:11
Everything seems right and correct... Oh well... I give up...
Click to expand...
Click to collapse
Sent from my HTC Desire CDMA using XDA App
lohp75 said:
Does it give you the option to update, or does it flash a bunch of crap real quick then back to hboot? Maybe try and redownload my original. txt file and don't modify it at all, zip it up and try again. I was able to flash yours without changing the mainver: surprisingly.
And the unrevoked that you did was through recovery right?
Click to expand...
Click to collapse
yes it does exactly that.. flashes up a bunch of crap real quick then back to HBoot.. And yes I applied the Unrevoked forever with recovery too (which told me I already had S-OFF). I have also tried it with your original text file (which is why I edited the baseband as I thought that was the issue)..
Its pretty odd that it doesnt work at all.... its got me totally scratching my head atm.... Im gonna try a couple of other things, but I think I wont be able to do it until the next release of Unrevoked that allows the Fastboot stuff like the GSM Desire...
EDIT:: Just tried removing all zips from the root of the SDCard and only have the PM99IMG.zip there.. Still the same result...
Ok, when I first started to play with this I got the same thing. I uploaded the zip to ipfreely who then told me it was corrupt, if he couldn't open it then phone can't right. So the next night I stopped using my windows environment and went back to using the mac osx archiver and tried it again. This time it showed flash errors, that told me the zip was good but info bad. So now I strictly use my mac and that's also where my cs5 is at.
Point being don't give up. Two more suggestions, try a different archiver, and as stupid as it sounds download your zip attachment from your post straight to your phone, again sounds stupid but exhaust all possibilities!
Cythrawl said:
yes it does exactly that.. flashes up a bunch of crap real quick then back to HBoot.. And yes I applied the Unrevoked forever with recovery too (which told me I already had S-OFF). I have also tried it with your original text file (which is why I edited the baseband as I thought that was the issue)..
Its pretty odd that it doesnt work at all.... its got me totally scratching my head atm.... Im gonna try a couple of other things, but I think I wont be able to do it until the next release of Unrevoked that allows the Fastboot stuff like the GSM Desire...
EDIT:: Just tried removing all zips from the root of the SDCard and only have the PM99IMG.zip there.. Still the same result...
Click to expand...
Click to collapse
Sent from my HTC Desire CDMA using XDA App
lohp75 said:
Ok, when I first started to play with this I got the same thing. I uploaded the zip to ipfreely who then told me it was corrupt, if he couldn't open it then phone can't right. So the next night I stopped using my windows environment and went back to using the mac osx archiver and tried it again. This time it showed flash errors, that told me the zip was good but info bad. So now I strictly use my mac and that's also where my cs5 is at.
Point being don't give up. Two more suggestions, try a different archiver, and as stupid as it sounds download your zip attachment from your post straight to your phone, again sounds stupid but exhaust all possibilities!
Click to expand...
Click to collapse
Tried 2 different archivers now.... WinRAR and 7zip... both same result.. I will get round to putting a Virtual Linux box with Virtualbox and try it with that... I all also try winzip just to be sure...... Not giving up just yet...
To be honest, thinking about it, if it was the archiver I was using then it should not have worked (my archive) on your phone either. The fact that it did, says its nothing to do with the Archiver otherwise you would have had the same result as me....
Cythrawl said:
To be honest, thinking about it, if it was the archiver I was using then it should not have worked (my archive) on your phone either. The fact that it did, says its nothing to do with the Archiver otherwise you would have had the same result as me....
Click to expand...
Click to collapse
I know I had an issue the first time around because I named the file PB99IMG.zip which really made it PB99IMG.zip.zip and it didn't show up. Probably not your issue but just a thought. Maybe you'd like to post the image, your baseband version, and we can make a file, test flash it and repost it for you to verify it works. Then, if it still doesn't work, we know it is your phone and possibly an issue with s-off that you may have to alert the unrevoked folks to. Try mounting /system to rw while booted and see if that works. That would be an indicator whether s-off is truly working.

How to root HTC Glacier (My Touch 4G) step by step ?

Can somebody tell me how to root a my touch 4g ? I'm kinda new at this and want to learn.
chitopr said:
Can somebody tell me how to root a my touch 4g ? I'm kinda new at this and want to learn.
Click to expand...
Click to collapse
Google VISIONary (r14) place it on your device, install it then run it. Temproot is for temporary rooting your device, its gone after a reboot, permaroot is for good, unless you use the unroot option.
Its safe, fast and easy. I use temproot option so I can use some root only apps. This is the first device I have felt no need to add a custom rom to or anything so VISIONary was the choice for me. If you want the long harder way directions can be provided. I do recommand you learn the long hard way at some point, its good to know your way around just in case.
chitopr said:
Can somebody tell me how to root a my touch 4g ? I'm kinda new at this and want to learn.
Click to expand...
Click to collapse
first of all rooting is not for everyone. I can name a few people in a few forums that do not run a rooted phone for one reason or another. Rooting your phone gives you possibilities that are not even considered when you are in a stock form. But on the other hand you can seriously damage your phone, with the possibility of it ending up a 500.00 paper weight.
The safest and easiest thing to do is download VISIONary.apk and just use temp root. That will give you the ability to do everything you need to do in a root status w/o risking FUBARing anything. You can wi-fi tether, run Titanium Backup and stuff like that.
If you are wanting to go full blown and root it w/ s=off and do the
you can do it the real way and follow Cyanogen's method
Or you can do via the TheUnlockr for a simpler way.
If I temp-root it, would I have to temp-root it every time I want to run the wifi-tether program? Or just on installation?
http://forum.xda-developers.com/showthread.php?t=858996
I have been trying to get visionary r14 but i have no idea where to get it. I google visionary r14 and use the first link like many people have said but whenever i click download it says firefox can't find the page. Does anyone know of some other way to get visionary ?
Nickoro said:
I have been trying to get visionary r14 but i have no idea where to get it. I google visionary r14 and use the first link like many people have said but whenever i click download it says firefox can't find the page. Does anyone know of some other way to get visionary ?
Click to expand...
Click to collapse
There is a link in the post 4 above this one.
does anyone know if this method will work on a htc glacier thats flashed to a network other then t-mobile.
http://forum.xda-developers.com/showthread.php?t=858996
its my friends phone and he is on simple mobile. i have rooted quite a few phones and know what i am doing but wanted to make sure it wouldn't conflict with his network
mdrentz said:
does anyone know if this method will work on a htc glacier thats flashed to a network other then t-mobile.
http://forum.xda-developers.com/showthread.php?t=858996
its my friends phone and he is on simple mobile. i have rooted quite a few phones and know what i am doing but wanted to make sure it wouldn't conflict with his network
Click to expand...
Click to collapse
Any rooting method will work on any phone it was designed for.
Hi guys, I just follwed the method by the unlocker... but at the end when I go to better terminal I'm not getting the # sign... So I recon that it didn't work, right? What might the problem be?
My bad, wasn't writing SU... OPPSSS!!!
I think I screwed something. I just noticed that my CW version is 3.0.2.4 and everybody I see is talking about 3.0.0.5. Is this something bad? I'm having trouble flahing gapps and I got another strange problem, If I put a ringtone and reboot the phone it reverts to the original one, and if I copy something to the SD card it gets deleted. Strange? Please can anyone tell me if I screwed this and how can I resolve?
mindwarp1571 said:
I think I screwed something. I just noticed that my CW version is 3.0.2.4 and everybody I see is talking about 3.0.0.5. Is this something bad? I'm having trouble flahing gapps and I got another strange problem, If I put a ringtone and reboot the phone it reverts to the original one, and if I copy something to the SD card it gets deleted. Strange? Please can anyone tell me if I screwed this and how can I resolve?
Click to expand...
Click to collapse
3.0.0.5 is the older one. 3.0.2.4 is the newer one.
What error are you getting when you flashed the g/apps?
how the eff is stuff getting deleted from the SDcard. the recovery image doesn't natively delete anything from the SDcard.
neidlinger said:
3.0.0.5 is the older one. 3.0.2.4 is the newer one.
What error are you getting when you flashed the g/apps?
how the eff is stuff getting deleted from the SDcard. the recovery image doesn't natively delete anything from the SDcard.
Click to expand...
Click to collapse
I don't really know, this is a new 32 gig class 6 sandisk memory, the original 8gigs is out ot the phone. I left last night transfering from my pc 20 gigs of music and today after i disconnected it from the pc it was gone.
I'm testing the ringtones to determine what the heck is going on, more on that later....
Gapps... starts to install and...
finding update package...
opening update package...
e:cant open /sdcard/gapps-gb-20110307-signed.zip
(bad)
Installation aborted
This is the 4th time I download this... Maybe permissions?
mindwarp1571 said:
Gapps... starts to install and...
finding update package...
opening update package...
e:cant open /sdcard/gapps-gb-20110307-signed.zip
(bad)
Installation aborted
This is the 4th time I download this... Maybe permissions?
Click to expand...
Click to collapse
Their has to be something wrong with (a) the recovery image or (b) the g/apps.
Are you sure you are downloading the correct g/apps for our phone running CM7. They have their own g/apps....If you are 100% sure it's for our phone then i'd suggest .....
... is attempting to manually flash the recovery image to make sure you do not get a blip in the system. Personally, i do not trust flashing recovery images with Clockwork ROM manager. I've seen a-lot of errors come out of it. This might be one of them.
Have you tryed the 8gig sdcard to install the g-apps? the 32gig may be bad
I just removed the sd card and put it on my laptop and copied a folder with music... after taht turned on the phone and it is gone! strange!
Gonna test the 8gigs..
Put the 8 gigs, and it installed... Hmmm...
NOw, after it finishes the setup of the apps I will format the 32 and test it...
Every time I try to download the Visionary.apk from the above posts, it downloads, then tells me the file has a virus... what's going on? Are they false positives?
_Allan_ said:
Every time I try to download the Visionary.apk from the above posts, it downloads, then tells me the file has a virus... what's going on? Are they false positives?
Click to expand...
Click to collapse
Its false so don't worry about it and go with VISIONary+

Help with updating to GingerStreak?

I've been wanting to since I've heard about it. I got this phone with Steve's Froyo on it. And I don't have a single clue what I'm doing...Could someone give me a step by step on installing GingerStreak?
guesirwowghr said:
I've been wanting to since I've heard about it. I got this phone with Steve's Froyo on it. And I don't have a single clue what I'm doing...Could someone give me a step by step on installing GingerStreak?
Click to expand...
Click to collapse
Gingerstreak is in development, so it really is not intended for everyday use and since you are new to flashing, etc. I would not recommend trying it. If you do, make sure your read the entire thread as there are updated files sprinkled throughout.
The instructions are in the first post of the Gingerstreak thread. If you don't understand those instructions you need to learn more before you try installing it. Check out the links in my signature for some places to start and if you do not read anything else read this guide.
The problem I have is that booting into Clockwork, Steve says to select update from ZIP FILE. Mine doesn't say that. It says update via pkg. But the download file is a zip file!...I'm confused!
guesirwowghr said:
The problem I have is that booting into Clockwork, Steve says to select update from ZIP FILE. Mine doesn't say that. It says update via pkg. But the download file is a zip file!...I'm confused!
Click to expand...
Click to collapse
use sreakmod,when you select update via pkg,you will boot into sreakmod,there you can update from a zip file.Again,this rom is in development and not very stable,you may have random reboot,short battery life,malfunction gps/3g etc,nondroid backup is recommended.
Sent from my Dell Streak using XDA App
guesirwowghr said:
The problem I have is that booting into Clockwork, Steve says to select update from ZIP FILE. Mine doesn't say that. It says update via pkg. But the download file is a zip file!...I'm confused!
Click to expand...
Click to collapse
Just as marvin02 said.... you have no business even thinking about making ANY changes to your phone in any fashion if you don't know how to get past the stock DELL recovery.
I'm not trying to flame you strongly suggesting you do a lot more reading to avoid bricking your phone
Well, after a full day of reading up and trying different things, I was able to get it to work. I used this guide forum . pocketables . net/showthread.php?t=9694 and was able to do it no problem. But I did have a problem with GingerStreak. It kept saying the process for my SIM card wasn't responding...So I just backed down to 1.9.1.
guesirwowghr said:
Well, after a full day of reading up and trying different things, I was able to get it to work. I used this guide forum . pocketables . net/showthread.php?t=9694 and was able to do it no problem. But I did have a problem with GingerStreak. It kept saying the process for my SIM card wasn't responding...So I just backed down to 1.9.1.
Click to expand...
Click to collapse
Glad you figured it out.
Anyone having issue with Gtalk unable to validate upon log in?
Running 2.0, (2.3.3), Baseband 135411-US, Kernel 2.6.35.7-perf.....

Categories

Resources