Desire HD Display Freeze - Desire HD General

Hi All,
Yesterday I bought the new Desire HD, and today I found out that when I start a call the display dims but as soon as I want to hang up the call the display keeps dimmed and the device doesnt seem to respond to any of the buttons.
Is anyone else experiencing same behaviour? I did a hard-reset but did not seem to work out. Maybe this is caused by the ROM therefore I post a little more info about ROM data:
Android version: 2.2
Basebanversion: 12.28a.60.140eU_26.03.02.08_M
Kernel version: 2.6.32.21-g5ed1769
[email protected] #1
Build number 1.28.405.1 CL266215 release-keys
Software number 1.28.405.1

WizardX said:
Hi All,
Yesterday I bought the new Desire HD, and today I found out that when I start a call the display dims but as soon as I want to hang up the call the display keeps dimmed and the device doesnt seem to respond to any of the buttons.
Is anyone else experiencing same behaviour? I did a hard-reset but did not seem to work out. Maybe this is caused by the ROM therefore I post a little more info about ROM data:
Android version: 2.2
Basebanversion: 12.28a.60.140eU_26.03.02.08_M
Kernel version: 2.6.32.21-g5ed1769
[email protected] #1
Build number 1.28.405.1 CL266215 release-keys
Software number 1.28.405.1
Click to expand...
Click to collapse
I think that is a proximity sensor failure. Go check some of the other threads

Try flashing older rom, to see if the issues till excist.

xmoo said:
Try flashing older rom, to see if the issues till excist.
Click to expand...
Click to collapse
how can he do that ? no root = no recovery...

liorra3 said:
how can he do that ? no root = no recovery...
Click to expand...
Click to collapse
Root is for custom roms... But stock HTC Roms can be flashed!!

xmoo said:
Root is for custom roms... But stock HTC Roms can be flashed!!
Click to expand...
Click to collapse
there is a way to do that without recovory ?

liorra3 said:
there is a way to do that without recovory ?
Click to expand...
Click to collapse
Yes,
There is a windows based RUU you can install offical roms from

liorra3 said:
there is a way to do that without recovory ?
Click to expand...
Click to collapse
http://www.shipped-roms.com/shipped/Ace/

thx for the info, i come from the nexus one (root phone), so that is new and fun game for me

Related

Several areas of problems for me.

Questions:
1. Will re-installing my O2 ROM sim-lock my phone? It doesn't sound like it w/ all the ROM installing going on but I have to ask to be sure.
2. I did a hard reset when I couldn't get mms working on my XDA Exec w/ USA T-Mobile (mss working now, though). I now have serious stability issues and apparently have missing files. For example, I have no picture frames (themes?) and I get a pop-up error when I scroll past that option with the camera. Would these issues be solved by running the individual extended rom files?
3. I have installed Microsoft Portrait but I can't get the XDA's camera to work with it. Is there a .dll for the camera somewhere to make this work?
4. I was in one of the non-corporate mode after the hard reset because I didn't know the code. Now I am in Corporate mode but does this undo the 'features' that were installed with the non-corporate mode or do I need to hard reset again?
Thanks,
Tron
ROM Version: 1.13.48 WWE
ROM Date: 19-09-2005
Radio version: 1.04.02
Protocol Version: 42.37.P8
ExtROM version: 1.13.139 WWE
Model No: PU10
Ok, I hate replying to my own post but I can't find this in the threads.
How does one stop the extended rom on the O2 XDA from installing? I read where people here manually install the cabs they want and I would like to do the same. However, the extended rom is installing all on it's own right after I enter the 0605 for Corporate configuration.
Oh, and if anyone can help w/ the first post above...that's be great, too!
Tron_Of_Borg said:
How does one stop the extended rom on the O2 XDA from installing? I read where people here manually install the cabs they want and I would like to do the same. However, the extended rom is installing all on it's own right after I enter the 0605 for Corporate configuration.
Click to expand...
Click to collapse
You can stop the ExtROM installing by doing a soft reset as soon as you first see the Today screen.
Tron_Of_Borg said:
Oh, and if anyone can help w/ the first post above...that's be great, too!
Click to expand...
Click to collapse
Sorry - can't help with any of those questions.
I can't believe I didn't think of that! (Would have been to chicken to try it without someone saying it's "OK" even if I did.) This is why you have 331 posts and I only have 3!
Thanks!
lol - glad it helped

Deathnoise 1.11.171 ROM. Bluetooth patched, camera fixed. Radio 1.04

Hi,
Here's my own modification. I did id for my own purpose, and decided to share it with you.
As a Base, I choosed 1.11.171 version of O2 ROM.
I stripped it from o2 stuff, left only necessary files. I added extra bluetooth profiles and left bluetooth and camera patch from new version (pug's version doesn't have it, despite what he says in his posts on this forum)
I also added Radio 1.04 from Pug's release.
Enjoy
alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed.rar [45 MB]
alternate downloads:
Mirror 1
Mirror 2
And if you used it, please - give me a feedback. thanks
deathnoise said:
Hi,
Here's my own modification. I did id for my own purpose, and decided to share it with you.
As a Base, I choosed 1.11.171 version of O2 ROM.
I stripped it from o2 stuff, left only necessary files. I added extra bluetooth profiles and left bluetooth and camera patch from new version (pug's version doesn't have it, despite what he says in his posts on this forum)
I also added Radio 1.04 from Pug's release.
Enjoy
alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed.rar [45 MB]
And if you used it, please - give me a feedback. thanks
Click to expand...
Click to collapse
Thanks for your sharing man, but the download link is not available now as what I saw as follows, would you plz provide another working link:
Dear users!
Our service temporarily limits the work due to technical problems. We will continue to maintain it in 1,5 months and we hope for your understanding. In this time we will improve Files-upload.com and we will present the more flawless and fast service to you. We hope for your understanding. Watch the news. Thanks that you worked with us, we are waiting for you on the updated site.
尊敬的国用户!
因为技术问题我们的服务暂时中断,我们将在一个半月之后继续我们的服务,希望您能够谅解。在此期间,我们将改进Files-upload.com,以便为您提供更优质快捷的服务,我们期望得到您的理解。请关注我们的动态,感谢您对我们的支持,希望我们优化后的网站能继续为您服务。
hmm. it's working again.. i think that hey had some minor technical issues. should be ok.
Is there improved radio strength, stability? What does .171 improve?
yes
radio was taken from pug's release (162).. which is good, because it's more stable than official 1.0
apart from this, there's patched bluetooth driver, that was officialy released by o2. _THE SAME_ that previously was circulating around this forum.
i merged it with extra profiles taken from previous releases, because some people experienced a tiny set of options with this upgrade.
camera fix was also merged from the new, official 171 release. dunno what it does, because i'm not using this function
overall, the stability is the same because main rom version is the same. it doesn't change anything in windows core. changes were made only to the extended rom. that's it.
i have many applications (including startup ones, like: spb pocketplus, resco explorer, skype, agile messenger, etc.)
i'm using my rom for a week and I, personally, didn't experienced ANY hangs or resets. it's working like a charm.
deathnoise said:
yes
radio was taken from pug's release (162).. which is good, because it's more stable than official 1.0
apart from this, there's patched bluetooth driver, that was officialy released by o2. _THE SAME_ that previously was circulating around this forum.
i merged it with extra profiles taken from previous releases, because some people experienced a tiny set of options with this upgrade.
camera fix was also merged from the new, official 171 release. dunno what it does, because i'm not using this function
overall, the stability is the same because main rom version is the same. it doesn't change anything in windows core. changes were made only to the extended rom. that's it.
i have many applications (including startup ones, like: spb pocketplus, resco explorer, skype, agile messenger, etc.)
i'm using my rom for a week and I, personally, didn't experienced ANY hangs or resets. it's working like a charm.
Click to expand...
Click to collapse
Thanks for taking the time to clarify for me .
cant download
clustered said:
cant download
Click to expand...
Click to collapse
added additional mirrors. enjoy
nice to see that someone still cares about Alpine and cooking new-old rom
it's a kind consolation when we don't (and probably won't) have wm5
Thanks!
deathnoise said:
added additional mirrors. enjoy
Click to expand...
Click to collapse
TKS buddy, they work!
BTW, my ROM is 1.11.171 too, but it suspends sometime, how is your ROM?
TKS again!
abc138 said:
TKS buddy, they work!
BTW, my ROM is 1.11.171 too, but it suspends sometime, how is your ROM?
TKS again!
Click to expand...
Click to collapse
so try it!
you have nothing to loose
deezer said:
so try it!
you have nothing to loose
Click to expand...
Click to collapse
Sure I will loose many programs installed and lot of time if it suspends as my old one...
I've got a questions regarding upgrading my O2
ROM version: 1.11.00 WWE
ROM date : 01/27/05
Radio version: 1.00.00
Protocol version: 1337.39
ExtROM version: 1.11.923 WWE
can I apply the ROM which you compile ?
does it means that I'll lose all of my apps settings then :-|
abc138 said:
Sure I will loose many programs installed and lot of time if it suspends as my old one...
Click to expand...
Click to collapse
...and suspends as well
AlbertWT said:
can I apply the ROM which you compile ?
does it means that I'll lose all of my apps settings then :-|
Click to expand...
Click to collapse
sure you can, and yes you'll lose everything (like after hard-reset)
My Alpine is dead
Yesterday I tried to update my alpine to this new Rom, but dissaster happened.
Maupgrade recognized my device and my version, and I told the program to begin with the update.
After more than 3 hours the scrren was blank with usb v1.01.
I took the pda and trie to hard reset it but it has been imposible.
Now the screen only says serial v1.01 or usb v1.01
If i try to re-run the maupgrade it only says that is checking the information of my device and stays like that for hours.
what can I do to have my PDA back?????
HEEELLLPPP
airjordan said:
Yesterday I tried to update my alpine to this new Rom, but dissaster happened.
Maupgrade recognized my device and my version, and I told the program to begin with the update.
After more than 3 hours the scrren was blank with usb v1.01.
I took the pda and trie to hard reset it but it has been imposible.
Now the screen only says serial v1.01 or usb v1.01
If i try to re-run the maupgrade it only says that is checking the information of my device and stays like that for hours.
what can I do to have my PDA back?????
HEEELLLPPP
Click to expand...
Click to collapse
if you still have the screen saying serial v1.01 or usb v1.01, your device isn't bricked. maybe try other rom upgrade
Still No Luck
I have tries to install again the same ROM but there is no way of doing it. Maupgrade freezes saying "checking infromation from your device".
Any other ideas??
Do you know where could i find an spanish rom for my qtek 2020i, or any other Rom that I could try??
thanks in advance
I still need HHHEEELLLPPPPP
airjordan said:
I have tries to install again the same ROM but there is no way of doing it. Maupgrade freezes saying "checking infromation from your device".
Any other ideas??
Do you know where could i find an spanish rom for my qtek 2020i, or any other Rom that I could try??
Click to expand...
Click to collapse
Dude, this happens sometimes. Take it out of cradle and then take the battery out. Re-insert the battery again and put it in the cradle and then re-run the maupgrade.
I have solved the problem!!!
I have tried doing it on a windows xp based computer and everything worked fine.
Has anybody had the same problem with windows vista???
Does any body know how can I find an spanish rom???
Thanks for your help
vista isn't good for flashing any htc device

HTC P3600i Camera not working after un-flashing

Hey Guys
for a couple of months I was using tnyynt WM6.1 ROM on my P3600i
But It used to hang randomly and used to reset my device. So i though of going back to my original HTC WM6 Rom
Everything was working fine till I wanted to use my camera. Now when I switch it on it gives me the following error:
"Unable to start Camera. Unable to initialize camera"
Please help me to start my camera
And also if someone can tell me the most stable rom/radio for my PDA in Australia
My current settings are:
ROM Version: 3.00.707.18
Radio Version: 1.46.30.11
Thanks
Same problem, can anyone help us?
Aiuspaktyn said:
Same problem, can anyone help us?
Click to expand...
Click to collapse
Hi
I fixed my problem by taking the battery out and leaving for 5 min and put it back in..
If it doesnt work, then reflash I guess.. that should also work too..

UK ROM upgrade now up

As above 1.66.405.2 is now available from the HTC Website
http://www.htc.com/uk/SupportViewNews.aspx?dl_id=856&news_id=500
Yup! - just Flashed mine
northernneil said:
As above 1.66.405.2 is now available from the HTC Website
http://www.htc.com/uk/SupportViewNews.aspx?dl_id=856&news_id=500
Click to expand...
Click to collapse
Pfff.. that's like soooooooooooo 10am! lol
Cheers Neil.
Just a quick question about the new Rom Update.
I'm currently waiting for T-Mobile to release there version of the Rom update from version 1.43 to 1.66.
I can get a copy of the 1.66 official Rom Update from the HTC website (my mate has a HTC HD2 which is unbranded).
Could i update my Rom using the download? Would it cause any problems to the phone?
Many thanks.
any noticed anything different?
I have an Uk version on O2 but its not taking my serial... any ideas?
surely I don't have to wait the O2 customised rom?
Does this at all stop the sluggishness and freezing from time to time
O2 and VF both run locked ROMs - the S/Ns need to be cleared by O2/VF/HTC to allow download...
any workarounds? ;-D
johncmolyneux said:
Pfff.. that's like soooooooooooo 10am! lol
Cheers Neil.
Click to expand...
Click to collapse
lol, sorry John!
I just got home from work, noticed it, checked for posts (none found!) so thought i'd post it!
<---- staying quiet next time! Lol
waynepyrah said:
any workarounds? ;-D
Click to expand...
Click to collapse
hspl, search the forums mate. It's widely available
is uk in europe 1 or europe 2 htc zones
doesn't matter, that's just the server to download from
rom update 1.66
Hi,
After I update the rom to the latest 1.66, do i need to install the previous updates on the htc website such as the sim contacts and camera fix.
Thanks
nirojan2 said:
Hi,
After I update the rom to the latest 1.66, do i need to install the previous updates on the htc website such as the sim contacts and camera fix.
Thanks
Click to expand...
Click to collapse
For future reference, it tells you the max ROM version that you need the hotfixes for, on the page where you download them.
In this instance, there haven't been any that have had a ROM version higher than 1.66, so no - you don't need them
EddyOS said:
doesn't matter, that's just the server to download from
Click to expand...
Click to collapse
cool europe 1 was crawling for me 30kb/sec so cancelled and its flying from the US location
Ermmm,
I know I'm the OP, but i had a o2 ROM. Anyone care to provide a serial no for me to download with? Lol
i have updated my rom early this morning as link was already posted in forum ...
and htc has updated their site latter in day ...
well i believe updates already included in this new rom ...
system is smooth
in messaging # of texts by a person is shown after his name
key board seems ok now ...
camera still have some brightness issues with led ...
lagness seems to be disappeared from messaging (currently after restoring my sms phone is still smooth)
task manager short cut is present in start menu
....
the above are some changes i have noted for now
rom update 1.66 RE
Hi,
Thanks for that really appreciate it.....any good things on the new ROM?
Thanks
nirojan2 said:
Hi,
Thanks for that really appreciate it.....any good things on the new ROM?
Thanks
Click to expand...
Click to collapse
I haven't found anything noticeable except a lower screen sensitivity and some value added applications.
Before I update my ROM, I read this
"The update will take up to 30 minutes, DO NOT interrupt the update process, make/receive phone calls, disconnect the device from the PC, or press any buttons until the process has been completed."
And wondered how I can stop any incoming calls, messages, mails etc. Should I just put it into airplane mode or something?

Help with Hero Rom Please

Hi,
My brother has a Hero which doesnt work very well, we had been trying to update to the latest firmware but were unable to do so, after we did a factory reset we realised that there was already a custom ROM on there, (the phone was purchased from ebay) below are the details :
Firmware Version: 1.5
Baseband Version: 63.18.55.06EU_6.35.06.18
Kernel Version: 2.6.27-mck-1.2
([email protected])
Build Number:
Modaco Custom Rom 2.8 core, ssh
Password: 9mzxij
The phone works terribly and is almost unusable due to the ROM version i believe.
Ive never rooted or put a custom ROM on an Android phone before. I dont know if it would be easier to Unroot the phone and put the standard ROM on there so I can update it to 2.1, or put on another custom ROM.
Your help and guidance is greatly appreciated.
thanks in advance.
supa
First question is, what network are you on? Do you want to keep the phone software debranded (HTC Firmware) or Customised from the Providor, For Example Orange, T-Mobile, 3(Three) e.t.c ?
oops, thats a good point, the phone is on orange, and to be honest i think id prefer it unbranded.
supasye said:
oops, thats a good point, the phone is on orange, and to be honest i think id prefer it unbranded.
Click to expand...
Click to collapse
OK, what you need to do is create a goldcard, install the unbranded WWE ROM and you will be presented with an update which you will need to get to push it up to the 2.1 ROM.
idroid84 said:
OK, what you need to do is create a goldcard, install the unbranded WWE ROM and you will be presented with an update which you will need to get to push it up to the 2.1 ROM.
Click to expand...
Click to collapse
fwarrr i wish it was as easy as windows lol... i'll try it tmrw if i have time and i'll let you know how i get on.
thanks.
supasye said:
fwarrr i wish it was as easy as windows lol... i'll try it tmrw if i have time and i'll let you know how i get on.
thanks.
Click to expand...
Click to collapse
If your new to it all it's not that easy depends how fast you can learn. I will try get you some links....
Please make sure all your data is backed up, phone numbers / memory card et al.
01. Goldcard Method
02. Flash Stock 2.73 ROM
You should get a notification on the phone when you boot it up telling you there is an update... get it for the 2.1 rom. Should do the trick.

Categories

Resources