Anyone run into this? Did a search on the forum but got nothing...
This is what I am following
Step 1.) Open Odin.exe and plug a usb cable to your computer that will connect to your phone (do not plug it in to the phone yet, just the computer)
Step 2.) Hold down both volume buttons at the same time and while holding them down plug the usb into your phone. You should see a COM message show up in Odin.
Step 3.) Leave all check boxes the way they are. Do NOT check the repartition box.
Step 4.) Click the PIT button and select the 512.pit file
Step 5.) Click the PDA button and select T959UVJI6.tar and then click Start
This true?
STEPS:
1. Power down phone with no USB cable connected.
2. Once you see “good bye” connect USB cable.
3. Wait till battery indicator is visible, and you can see the current charge in green.
4. Hold vol+ and vol-.
5. Press power until screen goes black, then let go of power only.
6. Should see the yellow digger.
7. Once your in download mode open up Odin v1.3:
8. Uplug your USB Cable and plug it back in until you see a Green COM port show in Odin
9. Check PDA under Files [downloaded]
10. Press PDA button and point this to the .tar file extracted from the firmware update. (T959UVJI5(FUS).tar)
11. Press Start and be patient you will see progress bars on your phone and in Odin if all is working properly.
http://www.molotovbliss.com/android...amsung-galaxy-s-vibrant-gps-fix-without-keis/
Whats the phone usb setting suppose to be? I've tried Media player, mass storage and samsung Kies with no luck.
It doesn't matter what your phone's USB settings are. You have to make sure you have the Samsung drivers loaded on your PC. And, you have to make sure you're in download mode. Here's the process the I follow (copied from somewhere on here I'm sure, sorry I can't give proper credit), it's worked for me every time:
1. Start ODIN Odin3. [Android + SLP], through ODIN select the .pit file from the ROM you want to flash.
2. Hit "PDA" button, and through ODIN select the .tar file from the ROM you want to flash.
3. Plug your TURNED OFF PHONE into the USB cable
4. Wait for the Battery/ charging indicator to start
5. HOLD VOL UP+ VOL DOWN+ POWER, as soon as the screen goes black RELEASE POWER, and continue to HOLD VOL UP+ VOL DOWN Until it enters download mode. Which should happen quickly and looks like a men at work highway sign.
6. If a COM port has turned Yellow in ODIN, then the device has been recognized. If it hasn't, unplug and plug your phone back in (I always have to do this).
7. Don't select any options other than what's set at default unless the particular ROM's instructions say otherwise.
8. Hit Start and be patient, it takes me maybe 5 minutes to get back up and running.
NOTE: If you do not see a blue progress bar on the phone's screen after a minute:
9a. Turn your phone off by pulling the battery.
9b. CLOSE ODIN
9c. Start at step 1 again.
Dave08 said:
It doesn't matter what your phone's USB settings are. You have to make sure you have the Samsung drivers loaded on your PC. And, you have to make sure you're in download mode. Here's the process the I follow (copied from somewhere on here I'm sure, sorry I can't give proper credit), it's worked for me every time:
1. Start ODIN Odin3. [Android + SLP], through ODIN select the .pit file from the ROM you want to flash.
2. Hit "PDA" button, and through ODIN select the .tar file from the ROM you want to flash.
3. Plug your TURNED OFF PHONE into the USB cable
4. Wait for the Battery/ charging indicator to start
5. HOLD VOL UP+ VOL DOWN+ POWER, as soon as the screen goes black RELEASE POWER, and continue to HOLD VOL UP+ VOL DOWN Until it enters download mode. Which should happen quickly and looks like a men at work highway sign.
6. If a COM port has turned Yellow in ODIN, then the device has been recognized. If it hasn't, unplug and plug your phone back in (I always have to do this).
7. Don't select any options other than what's set at default unless the particular ROM's instructions say otherwise.
8. Hit Start and be patient, it takes me maybe 5 minutes to get back up and running.
NOTE: If you do not see a blue progress bar on the phone's screen after a minute:
9a. Turn your phone off by pulling the battery.
9b. CLOSE ODIN
9c. Start at step 1 again.
Click to expand...
Click to collapse
Thanks a lot.
In my case the phone is recognised by Odin 1.3 only in recovery mode. When I get into a Download mode no yellow com message and I can disconnect and reconnect as many times as I want to no avail. And I have USB drivers installed and I can do "adb reboot download" as well. This is when I do all this with the phone off. When I do it with the phone on, it will be recognised by the Odin, but after I choose the pit and the rom and click the "Start" it will go int SetupConnection and then "All threads completed (succeed 0/failed 1)
Seems like I am having trouble even getting into the download mode the phone just boots up as regular, trying to reinstall samsung drivers right now.
now I am getting this
<OSM> All threads completed. (succeed 0 / failed 0)
grRRRRR
Yeah no matter what I do my phone just seems to boot into regular mode.
ludeboye said:
Yeah no matter what I do my phone just seems to boot into regular mode.
Click to expand...
Click to collapse
Try this plug the usb cable into the computer with you phone off hold vol up + down and plug usb into the phone .
Sent from my SGH-T959 using XDA App
ludeboye said:
Yeah no matter what I do my phone just seems to boot into regular mode.
Click to expand...
Click to collapse
I had problems with ODIN my first time too. First of all, are you running windows 7? If so you need to download and install the correct drivers. There is a thread on xda with both the 32 and 64 bit drivers. Another thing, I have readwhat seems like a dozen different methods for getting into download mode, but only ONE has ever worked. Plug your phone up to your computer and wait for the battery charging icon to completely show up... THEN hold down both volume buttons and power on. Let go of ONLY the power button when the screen goes black. A few secs later you should be in download mode. As for ODIN not seeing your phone it really sounds like you just need the drivers installed. Make sure "usb debugging" is turned on in settings> applications> development. One other thing to note, once in download mode with ODIN up and running you MUST unplug your device from the usb then plug it back in. Once you do this ODIN should see your phone. Now you should be good to go! I hope this helps and good luck!
Tried that, tried this
http://www.youtube.com/watch?v=rqxearzXrVY
No luck, this is really frustrating argh
I can get into download mode and my drivers that I have downloaded from Samsung site allow me to do adb shell stuff. So I assume that the driver is OK.
But no luck being recognised by Odin and only in the Download mode.
Really strange.
xxwhitehawk said:
I had problems with ODIN my first time too. First of all, are you running windows 7? If so you need to download and install the correct drivers. There is a thread on xda with both the 32 and 64 bit drivers. Another thing, I have readwhat seems like a dozen different methods for getting into download mode, but only ONE has ever worked. Plug your phone up to your computer and wait for the battery charging icon to completely show up... THEN hold down both volume buttons and power on. Let go of ONLY the power button when the screen goes black. A few secs later you should be in download mode. As for ODIN not seeing your phone it really sounds like you just need the drivers installed. Make sure "usb debugging" is turned on in settings> applications> development. One other thing to note, once in download mode with ODIN up and running you MUST unplug your device from the usb then plug it back in. Once you do this ODIN should see your phone. Now you should be good to go! I hope this helps and good luck!
Click to expand...
Click to collapse
Yeah I am on 7 64 bit, installed the samsung 64 bit drivers. I will try this 2-3 times I guess. I hear some newer vibrants are locked from using hardware keys to get into download mode.... true?
ludeboye said:
Yeah I am on 7 64 bit, installed the samsung 64 bit drivers. I will try this 2-3 times I guess. I hear some newer vibrants are locked from using hardware keys to get into download mode.... true?
Click to expand...
Click to collapse
Honestly I wouldnt mess with a hw locked phone . You should try to get it replaced . There is an adb command to get to download mode if you want to try that .
Sent from my SGH-T959 using XDA App
When I first used ODIN, it didnt recognize my phone either. After open device manager on my pc (windows vista), I saw that I was missing a Gadget Serial Control driver. I had a lot of trouble finding it, but read in an android forum that Samsung NPS was needed to use ODIN. I dont think that is true, but I installed it and found that I had all my needed drivers. JI6 flashed without a problem at all.
As far as d/l mode. I removed sd and sim cards. Have USB plugged into computer with ODIN opened. hold Vol + and vol - simultaneously while plugging the USB into the phone. D/L mode should come up automagically. If it doesn't, you will need to find the thread on how to go into it via ADB.
Hope this helps...
Another option is remove battery press and hold volume up and down plug in usb put in battery and the phone should go into download mode
Sent from my SGH-T959 using XDA App
If you're not using Odin3 version 1.3 you should give that a try. Seems more stable to me, others say the same. See forum.xda-developers.com/showthread.php?t=790026 (I can't post a working link since I'm a newbie here).
Odlin recognizes my phone no problem, I think its hardware locked "3 button issue" that prevents me to get into download mode. Now I need to figure outif its possible to get into download mode without pressing buttons.
Ok if you can use abd to get to download mode tar file has been created today that fixes hw locked phones Http://forum.xda-developers.com/showthread.php?t=802763&page=2
Sent from my SGH-T959 using XDA App
Related
WARNING: "MASTER CLEAR" WILL WIPE YOUR BUILT-IN STORAGE!
I am not responsible for any damage caused to your device.
What is this?:
If you see the "phone+!+computer" screen, you need this! If you deleted something you shouldn't have and can't get it back on your phone, this is probably your best bet. This is the Odin3 One-Click Downloader for restoring your phone from a completely software bricked state, or for whatever purpose you see fit to use it for. You don't have to change any settings, it is all pre-packaged and ready to go.
If this has helped you out, please consider buying me a beer!
How to use:
Download and install the correct drivers below (mac and linux don't need drivers)
Plug in your usb cable to your phone and computer
Open Odin
Enter Download Mode (see below)
Click Start
Be Patient, the first boot will take a while
How to use Master Clear:
Boot your phone up normally with usb debugging on
Click Master Clear
How to enter download mode:
Method 1ADB - from recovery or normally booted with usb debugging on)
Open a cmd prompt/console/shell
adb shell
adb reboot download
Method 2KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold Volume Up + Volume Down + Power
Method 3KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold both Volume buttons (from i9000 just down, don't touch the power button)
Plug in the USB cable and continue holding both Volume buttons
Drivers:
Windows 64bit
Windows 32bit
I897UCJF6 - Odin3 One-Click Downloader:
http://www.mediafire.com/?0w2y31maz8mdom4
http://www.multiupload.com/XAZUYNXSC1
The internal beta's are NOT one-click, please read the linked threads
UPDATE: I897UCJH2 (Internal BETA)
You can get it here
UPDATE: I897UCJH3 (Internal BETA)
You can get it here
how do u use odin? i open it, i see start and master clear.
very good question, I have no idea... I wont have my phone back for a few days.
downloading right now...
hopefully this flashes stock captivate firmware?
UPDATE: just ran it on my captivate (which was actually flashed to vibrant firmware and rooted)
it really is one-click! very convenient. just plugged in my phone in download mode.
but IT REALLY DOES WORK i'm back onto my captivate stock firmware, though it did wipe user data.
i did lose root, but... yeah. no biggy.
VERY GOOD FIND
mcvert said:
downloading right now...
hopefully this flashes stock captivate firmware?
UPDATE: just ran it on my captivate (which was actually flashed to vibrant firmware and rooted)
it really is one-click! very convenient. just plugged in my phone in download mode.
but IT REALLY DOES WORK i'm back onto my captivate stock firmware, though it did wipe user data.
i did lose root, but... yeah. no biggy.
VERY GOOD FIND
Click to expand...
Click to collapse
Awesome!! Did you have to do anything special to get it to see your phone or did you just plug it in and click start?
designgears said:
Awesome!! Did you have to do anything special to get it to see your phone or did you just plug it in and click start?
Click to expand...
Click to collapse
just plugged in and hit start! it did it all on its own.
Did it stay on "File analysis" for a long time?
NM, did a restart of Odin, it's all good now.
can u give step/step directions? i'm having issues.
1. i put in downloading mode
2. i open odin
3. i plug in usb
4. and it just stays at file analysis, nothing else happens. how long do i need to wait?
i'm using win 7 x64. i have kies installed.
Croak said:
Did it stay on "File analysis" for a long time?
Click to expand...
Click to collapse
if you're getting that, quit and unplug the phone, take out the battery so it's completely dead (and take out the sim card while you're at it)
then put back just the battery and put the phone into download mode (volume down + power)
then run odin and THEN plug in the phone. you have to do it in the right order otherwise it gets stuck on file analysis. go figure.
ok i did that..now i'm stuck. i have a computer and phone icon with a yellow sign in between. nothing happens. did i just brick my phone?? HELP (((
This should be pinned!
Thanks for this!
ok i did that..now i'm stuck. i have a computer and phone icon with a yellow sign in between. nothing happens. did i just brick my phone?? HELP (((
Click to expand...
Click to collapse
No.
If you had a messed up original Captivate install, do this:
Unplug
Remove Battery
Reinstall Battery
Hold the DOWN volume button, THEN the power button.
Should go right into Download mode
Open the Odin flasher
Plug USB in
Wait for the connection.
If you're trying to recover from having Vibrant firmware installed, it's the same, but you need to hold the VOLUME UP button instead of DOWN.
i did exactly what u said, remove battery completely, insert battery, hold down first, then press power until it powers up. i get the same issue. a black screen with a graphic that looks like this:
(phone graphic)- - - yellow sign with "!" mark - - - (computer graphic)
Dear OP,
I f*%!kin love you.
Love,
spyz
sejin said:
i did exactly what u said, remove battery completely, insert battery, hold down first, then press power until it powers up. i get the same issue. a black screen with a graphic that looks like this:
(phone graphic)- - - yellow sign with "!" mark - - - (computer graphic)
Click to expand...
Click to collapse
I had the same exact issue while trying to flash the firmware. What you need to do is make sure your phone is off. Open Odin. Attach the phone to your PC. Hold down and press power and it will boot into downloading mode. ODIN MUST BE OPEN!
As long as its attached to the PC and Odin is open it will go into downloading mode, not the picture that you are seeing.
spyz88 said:
Dear OP,
I f*%!kin love you.
Love,
spyz
Click to expand...
Click to collapse
Glad I could help!!
1. i opened odin
2. i removed/inserted battery so phone is off
now comes the problems.
1. i put the usb cable into the phone, and the black screen with computer/phone/"!" sign shows up.
2. i hold down and power, the black screen with computer/phone/"!" sign shows up.
3. i hold down and power right when i insert the usb cable, the black screen with computer/phone/"!" sign shows up.
i cannot enter downloading mode. i really appreciate your assistance, but i cannot get into the yelllow digger
well, looks like the guy with his files where they shouldnt be removed the file.
Can someone mirror it? I downloaded it at work, dont have it at home.
designgears said:
well, I did some digging around and found this...
http://homepage.mac.com/abbydog3/.Public/I897UCJF6-final-OCD-REV0.exe
It is a pre-packaged Odin3 oneclick downloader...
CONFIRMED, STOCK SAMSUNG CAPTIVATE ODIN3 ONECLICK DOWNLOADER!!
Click to expand...
Click to collapse
I tried to download it but it says the link not found or something like that....can someone please reupload it...
jhernand1102 said:
I tried to download it but it says the link not found or something like that....can someone please reupload it...
Click to expand...
Click to collapse
Ditto here. A new link would be great.
dont kno if im posting this in the correct section or not but can some one plz help? i was trying to flash the stock files for my samsung vibrant with odin, but it froze so i unplugged and tried to reboot my phone but the phone to pc screen came up. ive tried holding the volume buttons + power to get back to download mode, but it just reboots and goes back to it, can anybody help?
Did you hold the power button down till it disappears and then release the power button immediately as it disappears?
hadnt tryin releasing the power button right away but i just tried and still no luck
Johnz is right. To make sure, unplug & plug back in the usb cable, then hold down the volume keys & power, wait till the screen flashes to black, then release power.
Unplug and pull the battery.
Install battery.
While holding both volume buttons, plug in usb cable.
Have odin ready to go, it seems to help. The phone should power up directly to download mode, once odin sees it, hit start.
i dont get what im doing wrong because ive tried what u guys said but after the screen flashes black when it comes back on its the phone to pc screen. ive also noticed that if i pull the battery while the usb cord is connected the phone stays on at that screen until i remove the usb cord, is that normal?
i just read that if the normal ways dont work that means ur phone is hardware locked. looks like im gonna have to try to send it back to tmobile and hope for the best
Try the above, but also hold the home key. I did the exact same as you, and this enabled me to get back to download mode, so I could Odin.
1) Remove battery, SIM, and sd card.
2) Plug in USB Cable.
3) Hold down Vol +/- as well as home.
4) Press power button for 2 seconds, then release.
This should get you into download mode. Then you can Odin back to whatever you were intending to do.
thanx for all the help guys but nothing seems to be working for me
Just throwing out an update incase anyone was wondering, I got my replacement phone yesterday and it turned out to be hardware locked as well. Tried to flash the fix for it and it failed and bricked my phone! So after calling tmobile they will be sending me another replacement and hopefully that one wont be locked as well
I had the same problem trying to get into Download Mode, I got into download mode and using ODIN tried to flash update. The process was stick for 10 min.
So I unplugged USB and got this phone to PC icon. All I had to do to fix it was to go into download mode again by holding both vol +/- keys and pressing power button until screen goes black then release the power button as soon as the screen went black. If you hold the button longer it will go into recovery mode. Then open ODIN again and re-connect USB and ODIN will detect COM port. However you have to make sure that all samsung usb drivers are installed. That is it. Then flash the update and you all set. The phone will reboot and you are back up and runing.
ttabbal said:
Unplug and pull the battery.
Install battery.
While holding both volume buttons, plug in usb cable.
Have odin ready to go, it seems to help. The phone should power up directly to download mode, once odin sees it, hit start.
Click to expand...
Click to collapse
there is another way to this method, that works on any vibrant i've tried it on and also the captivates, had to help a friend restore his yesterday.
remove battery, sd and sim cards
plug in usb cable to pc and phone
hold down the volume buttons only
pop in the battery
if it comes up to the battery charging icon, pull the battery and put it back in again, should go right into download mode.
again, this works on any vibrant i've tried it on, and the captivate as well, good luck.
ugh im tired of bricking my vibrant
so i have obsidian v2 and I installed OCLF 2.2+ and now i'm stuck at the vibrant screen. i only had 3 apps on my SD card and i moved those over to the phone storage.. then i went ahead and did the lagfix... it said it was done successfully and then restarted but now i'm stuck at the vibrant screen
did i do something wrong?? (obviously i did but what? lol)
Do you know how to use odin if not you should start reading up on it. To get into download mode open odin, now take your battery out of your phone then put it back in, hold the volume up and down button, now plug in your usb cord that should be plugged into your pc you should see download mode now fix your phone with odin now I let go of your hand
Sent from my SGH-T959 using XDA App
I dont think there is a working LagFix for Obs.V2, odin back to stock and start over. This time dont try to lagfix.
yeah i was hoping not to have to do that (again) lol
Download Mode after phone ! PC symbol
odin failed and now i have the phone---!----pc icon.. i've tried all the methods of trying to get into download mode but nothing happens.
i'm pretty sure i don't have the hardware locked version because i got the phone prior to launch
nevermind!
I did the following:
1. take out the battery, sim and microSD
2. put battery in
3. ONLY hold vol down & power
4. plug in the USB and voila...download mode!
every method I read suggested using vol up+vol down.. none of those worked for me
Don't worry..read on
disturkis4u said:
odin failed and now i have the phone---!----pc icon.. i've tried all the methods of trying to get into download mode but nothing happens.
i'm pretty sure i don't have the hardware locked version because i got the phone prior to launch
nevermind!
I did the following:
1. take out the battery, sim and microSD
2. put battery in
3. ONLY hold vol down & power
4. plug in the USB and voila...download mode!
every method I read suggested using vol up+vol down.. none of those worked for me
Click to expand...
Click to collapse
I got the same scary looking screen last weekend too but be patient!
FIRST: MAKE SURE you have the proper android driver installed in the PC!
SECOND: open control panel>device manager, if you see the T959 or something like android device under USB sub menu then you are good to go.
Then continue repeating what you had done: keep vol up&down after battery in, USB cable in, download screen on, release vols, either open Odin app before or after.
LAST: BE BRAVE! I almost gave up after going to three different local stores and none knew what to do
Try this I did and it worked to get mine booting after a bad update.
I messed around with it using several methods of getting it to boot into download mode until I finally got it to do it. I think I left it plugged into the USB, powered it down until I saw the charging screen, then I proceeded to play with the different ways to hold the buttons to get it to download mode. If you are persistent enough and read a little on booting methods to get bricked phone into download mode you will succed if not then your not for the world of trial and error... the main thing is do the first steps I said before until it works
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
or try
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
any how try try try until it works
Once in download mode
Get your files together for your phone, and use Odin 1.85.
Plug into Odin and make sure it shows yellow and its added!
1. Now if your files have like 3 files and the exact .pit file for your phone
I found mine here
http://www.droidevelopers.com/showthread.php?11722-Download-OPS-amp-PIT-files
2. Click the PIT button and browse to your exact .pit file for your phone *It should now have added a check in the re-partition box under the options area of the Odin window. If not CHECK IT!
***If you don't have your .pit don't worry about this unless you suspect, or have a bad partition
3. If you have just 1 file just click the PDA button and load the file. If you have 3 then you will load the PDA file in PDA, the Modem file into PHONE, and the CSC file into CSC, there are way too many phones to link all the files so get you stuff together!
4. Now hit start.
5. When done and the phone shows the first sign of starting up IE Logo or whatever... immediately unplug the battery from the phone to shut it down.
6. Now put it back in and start it in Upload mode by pressing Vol Up, Home at the same time then the Power button.
7. As soon as the phone shows the first sign of starting up IE Logo or whatever let go of all buttons and using the Vol Up down Choose the Clear Cache option and go through and make sure you factory reset it if you can just for good measure.
8. Reboot
9. Now when the phone shows the first sign of starting up IE Logo or whatever take out battery again to power off
10. Now put it back in and start it in Download mode by pressing Vol Down, Home at the same time then the Power button.
11. Once in download mode Hook up to Odin again and flash it with a root kernel for your phone. Do not ask me just find it. I did it took time but I got all the files together over several days of reading and collecting the correct ones.
12. When done and the phone shows the first sign of starting up IE Logo or whatever... immediately unplug the battery from the phone to shut it down.
13. Now put it back in and start it in Upload mode by pressing Vol Up, Home at the same time then the Power button.
14. In most roots you will now have a advanced or mounting options and more options to use.
15. I cleared the Cache again, Cleared the Davilik Cache, Went into a option and actually mounted the cache formatted the Cache.
16. Use the option now to restart the phone...
And mine started up installed the apps and I am up and running, nice and smooth and no issues so far
I hope this helps out someone whos just about to go off the deep end, as I was there and patience and trial and error came up with this step by step way to recover mine. Thank me by hitting the little thumbs up THANKS button below this post.
And if your so happy your phone is up show your appreciation by buying me a Pepsi
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=E6M7UWKCZYSNE
scottsdesk
http://forum.xda-developers.com/showthread.php?t=1924233
Not sure why you created 2 threads.
Closed
The issue is as follow.
I tried rooting my phone they my MacBook Pro but it failed.
As i have no windows machinei borrowed someones laptop with Windows 7 (64Bit)
I installed Kies and downloaded Odin
The next step i did was booting phone into download mode by volume down, home button and simultaneous the power button and afterwards the volume up button. So far so good saw at the top some text like in red it said it was in ODIN mode, but when i opened ODIN nothing happened.
So i rebooted the phone by keep pressing the power button.
The issue i have now when i try to get in download modus it just booting up the phone instead of getting into the download modus....
I
dutch070 said:
The issue is as follow.
I tried rooting my phone they my MacBook Pro but it failed.
As i have no windows machinei borrowed someones laptop with Windows 7 (64Bit)
I installed Kies and downloaded Odin
The next step i did was booting phone into download mode by volume down, home button and simultaneous the power button and afterwards the volume up button. So far so good saw at the top some text like in red it said it was in ODIN mode, but when i opened ODIN nothing happened.
So i rebooted the phone by keep pressing the power button.
The issue i have now when i try to get in download modus it just booting up the phone instead of getting into the download modus....
Click to expand...
Click to collapse
To go to download mode power off device unplug
Press home power and volume down together till download mode comes don't press volume up at all
Then connect using cable to pc
And while flashing anything using ODIN keep all kies program closed
.
dutch070 said:
The issue is as follow.
I tried rooting my phone they my MacBook Pro but it failed.
As i have no windows machinei borrowed someones laptop with Windows 7 (64Bit)
I installed Kies and downloaded Odin
The next step i did was booting phone into download mode by volume down, home button and simultaneous the power button and afterwards the volume up button. So far so good saw at the top some text like in red it said it was in ODIN mode, but when i opened ODIN nothing happened.
So i rebooted the phone by keep pressing the power button.
The issue i have now when i try to get in download modus it just booting up the phone instead of getting into the download modus....
Click to expand...
Click to collapse
Hey what I suggest it....power off your device...remove the battery. ..wait for like 10 seconds (just to be safe) ... replace the battery and press the volume down and home first....then hold on to power...it should boot you into download mode....also unless you root the phone wrong or something. ..you can't harm the phone....keep trying hope this helped
I suggest you let Kies running, connect phone to Pc, let Kies recognize phone, unplug phone, shutdown Kies, disable antivirus, run odin as administrator.
Next, get the phone in download mode (remove battery then try again) and connect to Pc.