Is the 2.5mm jack funky for anyone else? When I have headphones or ext. speakers plugged in, slight movements will cause the connection to be lost -- I have to rotate the plug around to restore, and then hold the phone still. (Any fix other than new handset?) Thanks.
You are using the wrong size. 2.5 is too small. You should get a 3.5 and it should fit fine.
Sorry, I must be confused about the size (it's a 3.5mm jack?). I am indeed using the right sized plugs for the jack -- standard headphone/speaker plugs.
pavvy said:
Is the 2.5mm jack funky for anyone else? When I have headphones or ext. speakers plugged in, slight movements will cause the connection to be lost -- I have to rotate the plug around to restore, and then hold the phone still. (Any fix other than new handset?) Thanks.
Click to expand...
Click to collapse
Sounds like a bad jack. Loose joints, etc can cause that. Try another headphone or speaker plug. If the same happens, you have a bad jack.
androidmonkey said:
Sounds like a bad jack. Loose joints, etc can cause that. Try another headphone or speaker plug. If the same happens, you have a bad jack.
Click to expand...
Click to collapse
Yes, thanks -- it happens with headphones and speakers that have been fine with other devices (even happens w/the Samsung-provided set of headphones).
Bummer, but I may just have to live with it; I'd hate to trade this phone in for a refurb (for something so relatively minor)...
I had an issue where after about 30 minutes of playing music the phone would randomly think that signals were being send by whatever was plugged into the jack to pause/skip, etc. This would happen whether I was using the stock ear pieces or other headphones or had it plugged into my car's stereo.
I ended up exchanging the device to resolve the problem.
Mine has the same problem, so apparently it's not incredibly uncommon. Luckily I literally never use headphones with my phone, or anything that requires the 3.5 jack honestly so it's a non-issue.
RadAway said:
I had an issue where after about 30 minutes of playing music the phone would randomly think that signals were being send by whatever was plugged into the jack to pause/skip, etc.
Click to expand...
Click to collapse
Interesting, that happens on mine as well (I actually thought the random pausing may be a "feature" -- like for when the headphones become accidentally unplugged!).
Make sure your hedphones/speakers plug fits snuggly into the jack. I had an "issue" when I thought I had a bad jack, but I just wasn't plugging the headphones all the way in, looked like a jackass when I claimed a warranty replacement, and took the TMO skin off the phone for the last time before shipping my "defective" phone, just to try it one more time, saw that the plug didn't go all the way in, pushed it a bit harder and it clicked into place LOL
lqaddict said:
Make sure your hedphones/speakers plug fits snuggly into the jack. I had an "issue" when I thought I had a bad jack, but I just wasn't plugging the headphones all the way in, looked like a jackass when I claimed a warranty replacement, and took the TMO skin off the phone for the last time before shipping my "defective" phone, just to try it one more time, saw that the plug didn't go all the way in, pushed it a bit harder and it clicked into place LOL
Click to expand...
Click to collapse
I'll admit to thinking the same lol
Thanks, that is good advice (same thing happened to me once with an ipod nano -- case prevented a plug from going in all the way!) -- but in this instance, my case doesn't cover the top edge of the phone, so the jack is free & clear...
Related
I have been searching for this problem, but can't find anything about it.
Theres a problem with my Galaxy Note headphones. Every time i plug them in the Note, the audio is really bad, kinda like it only sends half of the music out, and I can normally only hear the music, and then the voice in the song is really really low.
But when I press the button on the headphones it works completely like it should, but I have to keep pressing the button. So if i stop pressing it, the audio gets really bad again.
Does it have anything to do, that I jailbreaked the phone with the Abyssnote kernel?
Did they worked properly before you flashed the kernel?
Maybe the headphones are just broken?
That's what I can't remember
Is there a way to reinstall the stock kernel?
Sorry for being a newbie..
Have you tried other headphones to see if its the Note or the headphones?
Your headphones are broken.
Sent from my GT-N7000 using Tapatalk
This has happened to me several times now. Pushing the jack harder and/or rotating it helps in my case.
Probably broken plug. Unfortunately many samsung's heaphones arrive broken...
Sounds like the pin alignment is in the wrong. What brand headphones and what were the made for? Try other headphones. I have a set of Nokia headphones that don't work on an iPhone or the note but work great on my Booklet netbook. Just saying, headphones with mics are not universal.
I own 20 nokia headphones. All had this issue.
normally i only get this issue when i havent pushed the plug all the way into the socket.
Same Issue w/AT&T Version
I purchased two G Note's back in March, and I am just now finding out four days ago that both devices will not allow the Headphone jack to completely be inserted into the port at the top of the phone. When inserted, although not properly seated all the way inside the device, you can hear sound in one side, and if you apply pressure downward you can hear both sides. I told AT&T I don't care that you have not heard of this problem, and what are you going to do about it. After taking my devices to two AT&T Retail Stores and a Best Buy, which is an Authorized Retailer, they all told me I may have defective devices. After being on the phone with AT&T CS Rep, 73 minutes the Rep comes back and says her Supervisor said it's not a warranty issues and not to replace me devices. I said let me talk to the buffon. Guess what, he/she never came to the phone to talk with me, so the CS Rep said she was going to put the Warranty Replacements through anyway. I have tried Samsung, Sony, and Philips Headphones, all of which are 3.5mm and a male-to-male audio jack to listen to my music in my car and this is when I discovered the problem. When at AT&T and Best Buy my Headphones fit into their display models without any problems, and so with their own Headphones. But when AT&T and Best Buy tried THEIR Headphones they would not fit into my phones. So at the moment, I am waiting on my replacement devices and hopefully those will be ok.
So I don't believe it has anything to do with your jailbroken phone or a kernel issue.
Do the headphones work?
I suggest you try to use the headphones with someother device. MP3player, desktop, TV.
See if they work OK with those.
I also suggest you try a different set of headphones with the Note and see if those work.
AW: Problem with the Note and it's headphones
Delete
I'm going to go way outside the normal thought process. Do you ever carry your phone in your jeans pocket? I've actually experienced a couple times where the lint in my pockets got into the headphone jack hole and it would do what has been described in previous posts about the jack not seating properly. Forcing the jack in, only compacted things further. I ended up spending a while with a needle and bent paperclip to get the stuff out. Get a good light and look inside. Maybe even compare what you see to another devise with a headphone jack. Good luck.
Sent from my GT-N7000 using xda app-developers app
unglued94ta said:
I'm going to go way outside the normal thought process. Do you ever carry your phone in your jeans pocket? I've actually experienced a couple times where the lint in my pockets got into the headphone jack hole and it would do what has been described in previous posts about the jack not seating properly. Forcing the jack in, only compacted things further. I ended up spending a while with a needle and bent paperclip to get the stuff out. Get a good light and look inside. Maybe even compare what you see to another devise with a headphone jack. Good luck.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
This is true. I got one of those cheep screen pens with a rubber tip as it has a plastic thing to hold it in the Jack hole by athread. I use the plastic bit to plug the hole to stop lint & moisture
From box 13......
Never happened to me and i am still loving the out of the box headphones. Maybe urs broken..
Sent from my GT-N7000 using xda app-developers app
had the same problem here:
It started with the same symptoms as you described, then (as a guy mentioned) I could make it working by turning the jack a little around when plugged in.
then Iost the left channel, then it stopped working.
went to the service: they replaced the whole input part (the internal audio in/out hardware) which sits right behind the 3,5 mm "headphone out".
Then it worked. However, I was curious to find out what had caused the malfunction. So I gave it to a Chinese friend (he has a repair shop for phones).
He found out that by plugging in "non compatible" head sets (probably my old Nokia one), which do have different sections at that pin for the remote control, I caused a short circuit to the audio hardware. We could simulate this on his computer, where he has a simulation software to control the current flow caused by head sets. So, If it is not your ROM (you said you are not on Stock) , you will have to replace your audio in/out at your service center.
hope this helps
greetings from Sichuan China
So, I'm running into an extremely annoying problem with my G2. Just the slightest touch causes my headphone jack to stop sensing properly.
Example: I'll be listening to Google Music and i'll just ever so slightly move my headphone cable near the base of the 3.5mm headphone plug and suddenly the audio will stop as if I have unplugged my headphones. Yet, my headphones are still snapped in and once I press play again, the music continues on as if nothing has happened.
Some times my phone will go from headphones and speaker...headphones and speaker, headphones and speaker. It's as if it doesn't know my headphones are plugged in.
We are talking super light touching here. Any rotation of the plug while connected will cause it to fail. Simply picking up the phone will cause audio to suddenly stop. I'd be willing to bet that by simply blowing on the damn plug would cause it to fail. Hell, even a fart in the plugs direction would probably cause it to fail. That's how light of a touch I'm talking about here. Also, tapping and rotating the headphone plug while it's plugged in would cause Google Voice search to launch. Super weird.
I don't get whats going on. I see know damage in the headphone input...everything looks fine. I've babied this thing since it has arrived. It has been in a case ever since.
My headphones are good because I've tried them on multiple sources. Plugging in different headphones in to my G2 causes the same problems still. I've tried switching ROMs but the same thing still happens.
I'm at a loss here. I need some advice on what to do. Should I just call Verizon and get a replacement phone? Do I need to unroot to do that?
What a pain in the ass.
Sushiglobster said:
So, I'm running into an extremely annoying problem with my G2. Just the slightest touch causes my headphone jack to stop sensing properly.
Example: I'll be listening to Google Music and i'll just ever so slightly move my headphone cable near the base of the 3.5mm headphone plug and suddenly the audio will stop as if I have unplugged my headphones. Yet, my headphones are still snapped in and once I press play again, the music continues on as if nothing has happened.
Some times my phone will go from headphones and speaker...headphones and speaker, headphones and speaker. It's as if it doesn't know my headphones are plugged in.
We are talking super light touching here. Any rotation of the plug while connected will cause it to fail. Simply picking up the phone will cause audio to suddenly stop. I'd be willing to bet that by simply blowing on the damn plug would cause it to fail. Hell, even a fart in the plugs direction would probably cause it to fail. That's how light of a touch I'm talking about here. Also, tapping and rotating the headphone plug while it's plugged in would cause Google Voice search to launch. Super weird.
I don't get whats going on. I see know damage in the headphone input...everything looks fine. I've babied this thing since it has arrived. It has been in a case ever since.
My headphones are good because I've tried them on multiple sources. Plugging in different headphones in to my G2 causes the same problems still. I've tried switching ROMs but the same thing still happens.
I'm at a loss here. I need some advice on what to do. Should I just call Verizon and get a replacement phone? Do I need to unroot to do that?
What a pain in the ass.
Click to expand...
Click to collapse
I think I might be having a similar problem as yours but with a different device (Square card reader). When I plugged it in the first few times there was a good sturdy click and it felt like it was being held in the jack well. But now it pulls out of the jack too easily, and a light touch causes the reader to disconnect. It seems like the contacts for the headphone jack may have been pressed in or something because it only maintains good contact if i hold a little pressure on the reader.
Either way, I don't like my options since I can either go on with a dysfunctional headphone jack, which might be ok since I use bluetooth more often than the jack, or I can try to get a replacement from LG which will likely be a refurb. I'm rooted too and assume I'd have to unroot in that situation. What to do...
Ever figure out your issue, OP? I'm having the same issue right now.
WCM3 said:
Ever figure out your issue, OP? I'm having the same issue right now.
Click to expand...
Click to collapse
I think I pushed the plug in too hard on mine and caused the jack to loosen. Amazon replaced the phone for me no questions asked. They continue to amaze me.
Hello people,
I've finally had enough with the headphone problems many have reported, the distorted sound and triggering voice commands. I've previously swapped the jack with a new one(had to buy a whole mid frame) and now it's started doing it again, about a month later(the original one lasted just as long).
The issue is that this phone is huge and when using it in my pocket with the headphones on, it moves that jack with every step. This wouldn't be a problem if the jack was soldered on or at least wired to the board, but instead it's just placed on top.
So I've decided I want to solder it on. I'm a bit scared as I've never soldered to a pcb board... And I might desolder other items. I'm going to hone my skills first on some other broken devices, but at this point I'm pretty sure I'll do it in the end.
Has anyone else here done this? Want to watch me possibly destroy this otherwise great phone? Heh.
Ty
Dude you're nuts. Just go get some Bluetooth headphones, it's 2016!! I literally haven't used my headphone jack more than 3-4 times in the 4 months I've owned this phone.
Also, I'm pretty sure the headphone jack isn't soldered in specifically so that if the jack moves around a little it won't cause damage to the board. This is common on most/all phones. Soldering it down would be a TERRIBLE idea. You will likely damage your phone.
Why didn't you just send it in for warranty repair?
Sean89us said:
Dude you're nuts. Just go get some Bluetooth headphones, it's 2016!! I literally haven't used my headphone jack more than 3-4 times in the 4 months I've owned this phone.
Also, I'm pretty sure the headphone jack isn't soldered in specifically so that if the jack moves around a little it won't cause damage to the board. This is common on most/all phones. Soldering it down would be a TERRIBLE idea. You will likely damage your phone.
Why didn't you just send it in for warranty repair?
Click to expand...
Click to collapse
Hi, I couldn't send it in because I unlocked it, which voided the manufacturer warranty. If I remember correctly on my old galaxy s4 it was plugged in with a cable, which was a much better solution. The reason my sound interrupts is because when it moves, it moves the pins on the board causing slight interruptions.
However the pins in the jack are long enough and soft enough that they would bend first instead of breaking the board.
And about Bluetooth headphones? I've bought 3 different sets, they either have huge controllers hanging and pulling on one side, or they are too big, or they're poor quality, I've spent more than I want to admit on different sets (see attachment).
So today I'm going to try and solder the jack, and throw this phone away if I break it and buy a small one, that doesn't put that much pressure on the jack in my pocket.
Stay tuned. I should take pictures.
No go
Well, it didn't work. I knew it would be hard to solder the little legs that where under the actual jack. Getting them all melted and touching before they cool down, without melting the plastic or the rubber around the jack was not possible in the end.
Only 2 of the 5 pads actually stuck together, and there was only a buzz coming from the headphones. I decided to open it again and remove the solder just in case something was shorted, I didn't want the sound chip to get toasted. My biggest mistake was leaving the glue on the jack, which stuck to the mid-frame. When I pulled that apart, the jack, with the two pads came with it.
I'm putting the pictures up if anyone wants to have a look at the mess, you can see in the first and second picture why my sound is interrupting: the pad is damaged from continuous friction.
The phone still works so I've lost nothing other than my time.
BTW, at the moment I'm using wired headphones to a Bluetooth adapter. Until they make smaller/lighter wireless headphones I'm stuck with this.
They got Bluetooth without the wire hanging thing that bugs ya (bugs me too) don't have a name or link right now but a quick Google search should pull them up
Ken C said:
They got Bluetooth without the wire hanging thing that bugs ya (bugs me too) don't have a name or link right now but a quick Google search should pull them up
Click to expand...
Click to collapse
Yea, I saw Jordan Keyes review these ones. They are too much like having screws screwed in your ears. If they can get them smaller, and still have 2-3 hours battery, I'll be interested.
I am not sure how the LG Tone type of Bluetooth ear buds are any more intrusive than regular earbuds with a cord hanging down the side of your body! They definitely last a long time for me.
bv90andy said:
Yea, I saw Jordan Keyes review these ones. They are too much like having screws screwed in your ears. If they can get them smaller, and still have 2-3 hours battery, I'll be interested.
Click to expand...
Click to collapse
How about these
Use this instead, it's a taotronics tt-br05 Bluetooth wireless receiver, you can plug your wired headphones in it and use Bluetooth instead of the 3.5mm plug.
Has play/pause and volume/track change buttons. Also has a mic for calls.
Search in Amazon.
Ken C said:
How about these View attachment 3865297
Click to expand...
Click to collapse
They only have 1 hour battery before you have to plug them in the little tube to charge again. The battery technology isn't there yet.
kadopt said:
Use this instead, it's a taotronics tt-br05 Bluetooth wireless receiver, you can plug your wired headphones in it and use Bluetooth instead of the 3.5mm plug.
Has play/pause and volume/track change buttons. Also has a mic for calls.
Search in Amazon.
Click to expand...
Click to collapse
I have actually been using this
Good option, but it wasn't great sound quality.
Anyway, I've bought a second hand Xperia z5 compact and use that now. The moto x style has become a in house tablet.
Doesn't matter what I connect, it doesn't feel like it's every inserted completely and because of it I've been getting really irritated when the music stops.. Can I replace it and keep the same audio quality?
Or should I wait to trade it in?
Are you 100% sure that there is nothing stuck inside the port that is blocking a secure connection? Could be something pretty tiny even as it wouldn't take much to prevent the plug from clicking in completely
Yup, mine is the same. H918. I just take a little piece of the rubber off the plug in part and haven't had any problems since.
i faced this with my g3, if the headphones do not have a mic its a 2 connector and idk why but it makes teh phone think u hit the answer/call/play/pause button, just get a headset with a mic, problem soft or get bluetooth and dont sweat it at all
pre4speed said:
Yup, mine is the same. H918. I just take a little piece of the rubber off the plug in part and haven't had any problems since.
Click to expand...
Click to collapse
I'll try that, thanks
Pocket lint has done this to me several times. I put a little hook on a tooth pick and reached in. Every time I think no possible way, that's what it is.
You can also pull the cotton off a q tip and twist in there.
Sent from my LG-H918 using XDA-Developers Legacy app
yup. my v20 started this with my car aux cable. activates google now constantly, stops music, any slight bump of the 3.5mm jack and im jacked.
Took phone apart cleaned with denatured alcohol and still the issue. The port is cheap and the connectors are not sufficently making contact with the aux end. Its a sh!tty quality part LG dumped on the phone so our quad dac experience would suck.. Just poor manufacturing is the issue imo
I have the same issue whenever I use a headset or plug without mic/buttons; Google Now keeps activating unless I position the cable just right, and it is extremely annoying. I also checked the circuit board when fixing my SD Card slot and noticed that the headphone jack is soldered on, so I wouldn't mess with that unless you have a lot of soldering experience under your belt.
when i plug my earbuds to the jack, only the left side outputs sound, even though it was fine just a couple minutes before, I tested it with multiple headsets and can confirm that it's not the headset's fault, i don't think there's water in it since it was in my pocket the whole time and it was not dropped either. I'm pretty sure it's the jack but I don't know how it could've broke. I'm a heavy listener and have some kind of headset plugged in for pretty much the whole day, but i don't think that wear could be the issue (I have a really early model if that helps) i would like to know your thoughts in this.
I had a similar problem, only difference i couldn't hear the vocals of a song but sound was coming from both the ears. It happened all of a sudden. But then i recalled later that, earlier while i had my headphones plugged in i was walking and the wire got stuck on the railing of a stair case and the earphones got removed from the jack very abruptly and thats what had caused damage to the jack.
I got it fixed from an asus service centre. It was the forst time fixing my phone so they did it for free.
You should try and recall if something like that happened to you while your headphones were plugged in that could have danaged your phone.
proboi said:
when i plug my earbuds to the jack, only the left side outputs sound, even though it was fine just a couple minutes before, I tested it with multiple headsets and can confirm that it's not the headset's fault, i don't think there's water in it since it was in my pocket the whole time and it was not dropped either. I'm pretty sure it's the jack but I don't know how it could've broke. I'm a heavy listener and have some kind of headset plugged in for pretty much the whole day, but i don't think that wear could be the issue (I have a really early model if that helps) i would like to know your thoughts in this.
Click to expand...
Click to collapse
Clean lint from inside the port your earphones aren't plugging in correctly. It'll solve your issue. Try cleaning with a rubber stick or something that won't damage it but will also collect the lint and remove it. I use match stick (the non phosphorus part) for this and it always works.