Database Users

Weird problem with lag on hero with MCK 2.2, setcpu, (compcache not enabled)

so im currently running MCK 2.2 rom with the updated kernel but without compcache enabled because i havent been able to get it working yet.
here's the problem though, about once a day my phone will slow down to an unberable speed... just like it used to with the OEM Rom.
when I open up SetCpu (which i know isnt supposed to do anything on the hero) it tells me that my CPU is running at 245mhz, but the control bars in SetCPU are set for 528/480mhz... when i hit refresh the phone comes back up to 528/480 and its fast(er) again...
anybody have any ideas on this one?

dmc971989 said:
so im currently running MCK 2.2 rom with the updated kernel but without compcache enabled because i havent been able to get it working yet.
here's the problem though, about once a day my phone will slow down to an unberable speed... just like it used to with the OEM Rom.
when I open up SetCpu (which i know isnt supposed to do anything on the hero) it tells me that my CPU is running at 245mhz, but the control bars in SetCPU are set for 528/480mhz... when i hit refresh the phone comes back up to 528/480 and its fast(er) again...
anybody have any ideas on this one?
Click to expand...
Click to collapse
What gov. are you using on setcpu?

theoottesen said:
What gov. are you using on setcpu?
Click to expand...
Click to collapse
performance, and profiles are not enabled... again, it only happens after 12-15 hours or so... about once a day

Similar problem...
dmc971989 said:
performance, and profiles are not enabled... again, it only happens after 12-15 hours or so... about once a day
Click to expand...
Click to collapse
I have a similar problem. I experience serious slowdowns (compcache enabled or disabled) about once per day. I have not verified the CPU speed as I'm not using SetCPU. I am using the "performance" governor in MCK.
My typical solution is a reboot.

im just curious if this is the original problem or a new one cause by this rom setup... because I dont ever recall reading anything about the CPU getting stuck at 245mhz from sleep mode being the source the slow downs....

Have you tried disabling the location services to verify it's not that particular bug you're seeing/experiencing?

x99percent said:
Have you tried disabling the location services to verify it's not that particular bug you're seeing/experiencing?
Click to expand...
Click to collapse
yes, i keep them disabled...

jamesthomas128 said:
I have a similar problem. I experience serious slowdowns (compcache enabled or disabled) about once per day. I have not verified the CPU speed as I'm not using SetCPU. I am using the "performance" governor in MCK.
My typical solution is a reboot.
Click to expand...
Click to collapse
I look in the kernel and there are two sets of settings: The profiles and a set of setting for the kernel speed (this is split into min/max for screen on and min/max for screen off)
For screen on, it is set for 480000 min/528000 max
For screen off, it is set for 245760 min/245760 max
If the screen is off, it's possible that the kernel went into the lower settings and didn't come back.
I've heard different reports on whether the profiles work in the Hero. I'm curious myself. I do know the stock rom has everything locked, but since the kernel source has been released and Modaco released his kernel, I'm not so sure if the lock statement is true anymore.
I'm compiling a kernel as we speak with the cpu frequency scaling on. Had some issues with the cpufreq.h file not seeing two variables necessary for the userspace profile, but hopefully I was able to fix that (won't know until I run it).

tkirton said:
I look in the kernel and there are two sets of settings: The profiles and a set of setting for the kernel speed (this is split into min/max for screen on and min/max for screen off)
For screen on, it is set for 480000 min/528000 max
For screen off, it is set for 245760 min/245760 max
If the screen is off, it's possible that the kernel went into the lower settings and didn't come back.
I've heard different reports on whether the profiles work in the Hero. I'm curious myself. I do know the stock rom has everything locked, but since the kernel source has been released and Modaco released his kernel, I'm not so sure if the lock statement is true anymore.
I'm compiling a kernel as we speak with the cpu frequency scaling on. Had some issues with the cpufreq.h file not seeing two variables necessary for the userspace profile, but hopefully I was able to fix that (won't know until I run it).
Click to expand...
Click to collapse
im fairly positive that the CPU is getting stuck in the sleep mode while the rest of the phone is not, causing me these issues... the problem is i dont know how to fix them

dmc971989 said:
performance, and profiles are not enabled... again, it only happens after 12-15 hours or so... about once a day
Click to expand...
Click to collapse
Ok, modaco rom sets the governor to "performance" on boot. This essentially "sticks" your CPU to max throttle.
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
Will tell you where you are, governor wise..
I'm not entirely sure what setCPU does, I've never used it, but I assume it just tweaks your top and bottom Mhz and maybe changes governor to performance when the screen is on? If it's configured properly? Maybe not, who knows?
If you want the best battery life, put the governor back to msm7k, it's a custom governor modified by HTC to make your battery last longer.
I changed the following line in modaco.sh:
echo "performance" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
to:
echo "msm7k" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_govern
and haven't noticed any slowdown from it.. my battery is lasting longer than it did on Stock or Fresh 1.1...

Froyo roms increase your battery life! try this (UPDATE 08/26/2010)

this may be posted in the wrong section but i would like everyone running froyo to test this out
HERE IS THE LINK TO GET THE LATEST SETCPU
http://forum.xda-developers.com/showthread.php?t=505419
So I have been doing some experiments on ways to save battery life....I think i have made a break through it is not fully tested i would like for some of you to try it out.
with the latest updates to your ROM itself, setcpu, superuser, and the addition of cache cleaner and the incredible AUTOKILLER (a must have) i have been able to run extremely low setcpu sleep profiles without any noticeable loss of performance.
Believe it or not i have my sleep profile down clocked to 19200mhz with out "noticeable" performance loss
i would like for some of you if possible to try these profile out for a while and see how it works out for you
DEFAULT 480min---whatever you want max (mine is 787) ondemand (for performance)
OR DEFAULT 245min---whatever max (for even more battery savings)
SLEEP 192min---480max ondemand (works great even without sleep to wake lag)
it works dont believe me then check out set cpus new feature "time in state"
open setcpu
go over to info
scroll down a little and you will see the times in state your phones cpu runs in the most
you should now see values at the lowest state of 19200
if this works in theory we can benefit from longer battery life
and faster charging
please try these out and report back to the post or PM me...this could be good
Thanks
UPDATE 8/22 EDIT: some users are having success running an even lower default 19min--whatever max (thats even more savings) will be looking into it
try these even lower profiles
DEFAULT 122min--whatever max (screen ON cpu does not drop below 122mhz)
Screen OFF 19min--245max (no lag just ran pandora and cardio trainer at the same time here no lag from sleep to wake either)
or Screen Off 19min--480 max for more performance
REMEMBER not to have conflicting profiles and to have SCREEN OFF at your highest priority
please post here your own findings and results
Thanks again
UPDATE 08/24/2010
after experimenting with other speeds i have finally settled on these speeds for my personal taste on performance and battery savings
MY FINAL SETTINGS...
DEFAULT 19MIN---786 or whatever MAX on demand
SCREEN OFF 19MIN---480 MAX on demand (highest priority) think deeply about why this is the highest
TEMP <40 19MIN---528MAX (screen off overrides this which cools anyway)
BATT <40 19MIN---604MAX
next more into advanced settings....coming soon
UPDATE 08/26/2010
im almost at the holy grail here
try this set up
SCREEN OFF 19--480 (95 priority)
TEMP <40 19--580 (90 priority)
ADVANCED SETTINGS
SAMPLING RATE---100000
UP THRESHOLD---98
ignore nice ---0
power save bias---0
hit apply (if you like it check set at boot)
ALL CPUS ARE NOT CREATED EQUALLY WE ALL KNOW THIS SO DONT EXPECT MY EXACT SETTING TO WORK FOR EVERY SINGLE PHONE
I CAN ONLY OFFER A STARTING POINT BUT ITS UP TO YOU TO TWEAK IT BUT ITS WORK
I HOPE THIS HELPS
things to notice....
in the main screen in setcpu watch the main frequency values bounce up and down...after a few seconds the values seem to stabilize at the lowest frequency of 19
in time of state screen even when screen on most of the time the 19 freq get the most values
i need a few guys to run, test and monitor the values that i just posted ^^^HERE^^^
this may further the battery life once we stabilize the frequency to 19 most of the time while keep the SAME performance which i think i may have did
run some linpacks and quadrants with those setting
i got
5.4 linpack running 787max
431 quad running 787max
then it drops back to 19 and stabilizes
hope this works and please post all your feed back and setting so we can learn this and get it perfect
thanks

I even use 122 and 480 for my screen off profile.. And I don't have any lag at all.

thisisreallygay said:
I even use 122 and 480 for my screen off profile.. And I don't have any lag at all.
Click to expand...
Click to collapse
19 is even lower try it

Oh 19200? Wow I wasn't paying attention well enough. I'll try it.

Almost from the beginning of my rooting in May and using SetCPU, I've been using 19.2- 748.8 (on demand) with the screen on (sometimes higher but recently reduced the max to see if it helped with some FC's I was having - still haven't determined if it was the profile or the ROM that fixed my FC's).
I use 19.2-245 for screen off. I'd venture that there's about a one second delay for the caller ID to work once a call rings in, but it's more than bearable and worth it.
I have it go to 19.2-528 when the battery is less than 25%,and 19.2-480 if the temperature is above 49 degrees celcius.

I wonder what it's like when receiving a call. I just set it and I'm not having any lag with just turning it on or anything. I'll test it out with other things. I hope this greatly improves my battery.

roirraW "edor" ehT said:
Almost from the beginning of my rooting in May and using SetCPU, I've been using 19.2- 748.8 (on demand) with the screen on (sometimes higher but recently reduced the max to see if it helped with some FC's I was having - still haven't determined if it was the profile or the ROM that fixed my FC's).
I use 19.2-245 for screen off. I'd venture that there's about a one second delay for the caller ID to work once a call rings in, but it's more than bearable and worth it.
I have it go to 19.2-528 when the battery is less than 25%,and 19.2-480 if the temperature is above 49 degrees celcius.
Click to expand...
Click to collapse
shame on you for keeping that secret all to yourself
SHAME

By the way why did you say froyo roms specifically? I'm trying this on tainted tenzo and it's working. I'm usually on a frooy ROM though.

Hi Guys,
Can you please tell me how to get setcpu? I can't find it in the market.
Sent from my Nexus One using XDA App

Search for it on his website, idk what his website is you'll have to search for it. Or download a ROM with it already in it.

im on froyo 30 and was unable to get the 19.2 to show on time in state with screen off profile set to 100 priority at 245/19.2
i was however able to have it start using that frequency by using 710/19.2 as my default setting, then enabling the 245/19.2 profile as screen off.
ive read its not too good to have the cpu jump more than 300mhz per profile though so im not sure how this will work out.

thisisreallygay said:
By the way why did you say froyo roms specifically? I'm trying this on tainted tenzo and it's working. I'm usually on a frooy ROM though.
Click to expand...
Click to collapse
hmm last time i was on sense rom sense fell apart if you clocked lower than 245
epically receiving a phone call
but i only test this method on froyo

I've heard that too. Although I don't know what is bad about it.

sh_mohanna said:
Hi Guys,
Can you please tell me how to get setcpu? I can't find it in the market.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
HERE
http://forum.xda-developers.com/showthread.php?t=505419

eklipze said:
im on froyo 30 and was unable to get the 19.2 to show on time in state with screen off profile set to 100 priority at 245/19.2
i was however able to have it start using that frequency by using 710/19.2 as my default setting, then enabling the 245/19.2 profile as screen off.
ive read its not too good to have the cpu jump more than 300mhz per profile though so im not sure how this will work out.
Click to expand...
Click to collapse
i heard that too but all froyo dev have a 245 to 710 stock on their roms
thats why i kinda spilt the two profiles and why 245min--- is experimental
leave your screen off for a while and see if the ime of state shows up
also make sure not to have conflicting profiles running in setcpu

Hmm. Well tainted is vanilla but has some sense elements (like sense dialer) So idk. It seems to work. I'll test out calls.

thisisreallygay said:
Hmm. Well tainted is vanilla but has some sense elements (like sense dialer) So idk. It seems to work. I'll test out calls.
Click to expand...
Click to collapse
oh ok tainted is not vanilla
tainted IS sense with sense removed with vanilla remaning hence the word tainted
some sense is still there
i think

Yeah it's got sense contacts and stuff but vanilla messaging. But it has the sense dialer so I think it would also have lag with calls if the sense ones were having lag. And I just tested it and it took a lil while for it to recognize whose number it was but it still gave me plenty of time to answer the call. I'll be testing to see how it improves battery. Thanks for the find

Im also testing setcpu Advanced settings batery life (without performance loss)

What settings are those?

Overclocking issue

Hi I`ve got SetCPU installed and flashed jacobs 0130 kernal so I can overclock my Wildfire.
Now I`ve got a small issue, I`ve set it at 710 max and 556 min settings and it seems to be running fine, but when the battery starts getting a bit low it causes it to freeze and have problems running some apps. I know its personal choice for how much it is overclocked but are there any recommended speeds for min and max settings to get it running well or is it just a question of experimenting until I get it to my liking?
I have searched the forums and everyone seem to have different preferences.
Thanks again Nexus04

I got random freezes using SetCPU too. I uninstalled and used OverclockWidget instead, havent had a single freeze since

Thanks I`ll have a look at that

why do you have your minimum setting overclocked? the slowest your phone can go even with screen off is 556, no wonder phone chucking a hissy fit
i'm running 691 max 245 min set on performance, not one freeze.
running wildpuzzle v.08

Thanks ephbee, thats made that clear for me, I was having a "DOH" moment there

Cyanogen 7.0.0 lag when turning screen on

Just as the title says, but here's some more details.
I have my cpu set to 1.1Ghz during the normal day 245Mhz min.
I have my widget on my homescreen and a custom profile set for when the screen is off for 368max and 245min.
When I turn my screen on and unlock it, it lags on my screen and says 368 max, then it jumps to the 1.1 and everything is fine.
It seems to lag there longer than it used to, has anyone else noticed this problem.
I used to have Pershoots Kernel on 6.1, do you think if I put Pershoots Kernel back on it will eliminate the lag and switch to 1.1 faster than it does now?
Just some thoughts and advise would be great, thanks guys.
Sent from my HTC Vision using XDA App

I would ditch setCPU and use CM's built in overclocking settings. set your clock speed to whatever you like and use the ondemand governor.
your screen wake lag will almost certainly disappear and I bet your battery life doesn't change a bit. you can play around with it, of course, and find what's best, but I have found that since CM introduced built-in overclocking, it is more functional to use it instead of setCPU. my battery life hasn't changed a bit, partly because when the phone is in an idle state it is underclocked by default, and also because I don't have setCPU constantly having to think to make changes to my clock speeds and governors based on what profiles I've set up.

CPU isn't scaling, not affecting battery life?

Here's an issue I just noticed late last night. My CPU seems to be stuck at max. I've tried different governors, wiped cache/dalvik and reflashed kernel and rom. I also killed all running apps to see if an app was causing it, to no avail.
Here's what really stumps me, my battery life seems fantastic. Not what I'd expect if my CPU is running at 100%. Could there be an issue with detecting CPU speed? As I mentioned before, trying different governors doesn't help with scaling but I notice when I select "powersave" my CPU jumps from max to the minimum value and stays there, still not scaling.
Before someone mentions I did search before posting. Went through the threads, tried the suggestions within and still have the problem. Hence why I'm posting here now.
Am I overlooking something? Any help will be appreciated, thanks!
Edit: My current rom and kernel are in my sig.

so are you monitoring this via setcpu on Decks?

alaman68 said:
so are you monitoring this via setcpu on Decks?
Click to expand...
Click to collapse
Yes I am, is there a known issue?

My understanding is that having both setcpu and the native CPU performance running will result in some conflict. that is probably the problem, but I don't know how to monitor the scaling with the native performance. so i see what you are trying to do.
I never run setcpu on CM7 or Decks because it is built in, but if the battery life is alright, it would appear the built in takes precedence.

Is there a good way to monitor the CPU without setCPU? Thanks

cesjr02 said:
Is there a good way to monitor the CPU without setCPU? Thanks
Click to expand...
Click to collapse
check out "system panel"
edit: or android system info app > system tab > cpu. gives you a break down of time (%) spent at each frequency.

Thanks, I like that app a lot.
Unfortunately even after deleting setCPU I'm still seeing 100% CPU usage. According to system panel the System is using 80%.
Edit: I am underclocked to 499MHz, and that's where she's pegged. Still oddly enough I'm getting the best battery life I've seen in weeks.

My CPU doesn't scale correctly either. Its either running at MAX, Deep Sleep, or 245mhz. Never does it use the in between frequencies no matter what govenor I use(I have tried them all). I use CPU Spy to check scaling and No Frills CPU to change the governor both are from the market.

cesjr02 said:
Thanks, I like that app a lot.
Unfortunately even after deleting setCPU I'm still seeing 100% CPU usage. According to system panel the System is using 80%.
Edit: I am underclocked to 499MHz, and that's where she's pegged. Still oddly enough I'm getting the best battery life I've seen in weeks.
Click to expand...
Click to collapse
so if you do this:
or android system info app > system tab > cpu. gives you a break down of time (%) spent at each frequency
what is the frequency while it is sleeping?
1. you may need to overclock just a bit
2. you may want to reflash rom without wiping the data and see if that helps
3. every phone is slightly different, so yours may need more time to process the commands at 499, especially if you are undervolted as well. which is why you getting pegged.

alaman68 said:
so if you do this:
or android system info app > system tab > cpu. gives you a break down of time (%) spent at each frequency
what is the frequency while it is sleeping?
1. you may need to overclock just a bit
2. you may want to reflash rom without wiping the data and see if that helps
3. every phone is slightly different, so yours may need more time to process the commands at 499, especially if you are undervolted as well. which is why you getting pegged.
Click to expand...
Click to collapse
Thanks, says the time spent at 499 MHz is 92.51%. I don't think underclocking is the issue. If I overclock to 1113MHz it will peg there as well. Seems to only go 100% when screen is on however according to the system panel app. I'll try your suggestion in (#2) and report back.

Tried reflashing the rom without wiping. Still have the same issue. So odd. I'll try a different kernel just to see if that helps, but I'd hate to part with my 3.3.7 LEE kernel.
Last thing I can think of is doing a full wipe, but I'd like to avoid that if I can.

Definitely experiencing the problem with other kernels. I'm out of ideas.

Did you try tiamat 4.1.0? I'm using it now and the battery life is right there with 3.3.7.
Sent from my PC36100 using XDA App

Did you restore any apps with titanium backup by chance?
Sent from my PC36100 using XDA App

By the way, I appreciate all your help alaman68.
Tiamat 4.1.0 was the other kernel I tried. No luck. Also I've never used titanium backup to restore apps. I'm stumped as to why my CPU won't scale anymore. The Android System seems to be using as much as I allow it.

Trying, you could try a sense rom for a day and check the scaling for a benchmark.
Is there anything else you are running? Undervolting, v6... Anything else?

Not undervolting as my phone never liked it. Nor running V6 or any other scripts either. I'll try flashing a sense rom, see if I have the same problem there. Or else, think doing a full wipe and reflash everything would help?

if all else fails, a clean flash won't hurt. Even get a new download. Gotta ask, did everything properly? you using amon_ra recovery? did you download any new apps when that started happening?

I may just have to. I suppose there's always a chance I made a mistake somewhere, but I've been at this rooting/flashing thing for a long while. Thing is, everything was fine up until I noticed it last night.
I'll do a clean install. I can always nand restore if it doesn't work. (Save me the time to set up everything.)
I'll report back

Did a clean install and guess what, my CPU is scaling again! There must have been a conflict somewhere. Thanks again alaman68 for all your help and suggestions. Sometimes these phones get gremlins I tell ya.