hello, i have been trying every sense build out there, i love mdeejay Froyo Sense v. 2.2 it is very stable, just not the theme so much, i read somewere that if i change the framework it will work but i tryed that and it didnt. so i just wanted to know if someone can explain or show me to the right direction (if there is any) on doing this.
thanks in advance.
-S3BAZ10
S3BAZ10 said:
hello, i have been trying every sense build out there, i love mdeejay Froyo Sense v. 2.2 it is very stable, just not the theme so much, i read somewere that if i change the framework it will work but i tryed that and it didnt. so i just wanted to know if someone can explain or show me to the right direction (if there is any) on doing this.
thanks in advance.
-S3BAZ10
Click to expand...
Click to collapse
What route did you go down when you tried to swap the frameworkres.apk?
motoman234 said:
What route did you go down when you tried to swap the frameworkres.apk?
Click to expand...
Click to collapse
i used droid explorer, i first pulled out the framework of an earlier build also by the same dev. and then using droid explorer replaced it with the one i wanted rebooted, and it just didnt boot.. =/
S3BAZ10 said:
i used droid explorer, i first pulled out the framework of an earlier build also by the same dev. and then using droid explorer replaced it with the one i wanted rebooted, and it just didnt boot.. =/
Click to expand...
Click to collapse
I would give it a go with adb, I have found at times droid explorer leaves files blank or unusable somehow. Its a great attempt at a GUI, better than I could do by all means...just a bit buggy at times.
Also, give mattc evo build a try, its is the most stable for me to date.
try mdeejays desire hd build.
Related
This will probably look redundant to some of you but I had a really hard time locating a working SprintTV apk after installing Fresh.
Even though Geek For Me has the removed Sprint apks for download on his website the SprintTV in that folder did not work for me (I tried multiple times to uninstall- reboot-re-install) It would open but when I clicked on "Live" it would hang on the loading screen and sometimes would give the "try again" error
Anyhow I eventually found a good working copy of the original EVO SprintTV apk and I just wanted to share for all that need it
SprintTV.apk
Did you put it in the /data/app folder or the /system/app folder?
SolsticeZero said:
Did you put it in the /data/app folder or the /system/app folder?
Click to expand...
Click to collapse
no, I just installed with an Installer from the market. I did the same with the one I posted. Geek For Me's apk did not work, this one did.
does this work on Froyo.. I am running CM6 on my Hero. I am going to try this out.
been looking for a solution. and this file.
well give an update if it works for my Hero on CM6 aug 22 version.
Edit: this works!!!!
thank you very very much!
Dan330 said:
does this work on Froyo.. I am running CM6 on my Hero. I am going to try this out.
been looking for a solution. and this file.
well give an update if it works for my Hero on CM6 aug 22 version.
Edit: this works!!!!
thank you very very much!
Click to expand...
Click to collapse
you are very welcome. Yes I'm on Fresh Froyo ROM
Getting an internal server error when trying to download...
Thanks! works great
It just sets there spinning forever on my evo with cynagenmod
Thanks! Works great on Sprint Lovers ROM, 2.2.
Thanks for this works great! Off to go watch the wings game during a performance!
I have installed Gingervillain 1.1 rom on my desire which i much prefer over sense. The only thing i miss is the HTC keyboard, is it possible for me to get this?
thanks
325i. said:
I have installed Gingervillain 1.1 rom on my desire which i much prefer over sense. The only thing i miss is the HTC keyboard, is it possible for me to get this?
thanks
Click to expand...
Click to collapse
search and install htc ime mod apk.
edit here the link :
http://forum.xda-developers.com/showthread.php?t=663608
Alex-V said:
search and install htc ime mod apk.
edit here the link :
http://forum.xda-developers.com/showthread.php?t=663608
Click to expand...
Click to collapse
Thanks, I have installed it but everytime I restart the phone it switches back to the android one.
Anyway to sort it?
hi, mine does the same, im on redux though. I think its Gingerbread related, ive noticed that Docstogo app also loses its registration settings on restart. Just a small prob that needs to be ironed out of gingerbread roms me thinks.
Deffo not gingerbread related, im using cm7 and restart with htc ime still default. What launcher are you using ? Could the cause it ?
Move it to internal memory.
It is available through the donate version of Liberty Toolbox on the market! Support your ROM developers, it's only $5. I am installing it now. I will report back with all the awesomeness that has been having people froth at the mouth lol. Nom nom nom
Liberty 2.0 will be released for the masses in a couple days on the forums. They are calling this some what of a beta stage. Either way, I don't think they would release something that would need to be tested for a beta stage for $5 LOL.
Remember, you have to SBF if you are on the Gingerbread leak. If you are not on the Gingerbread leak or any Gingerbread ROM, a simple whipe data/cache will work. This has been confirmed by the developers themselves.
Edit:
My Quadrant score is 1388 on clean installed Liberty 2.0 running 1.0Ghz. Overclocked to 1.2Ghz, which is what I normally run, it's 1629. AT 1.3Ghz, I get 1724.
Edit #2: Liberty 2.0.1 has been released and you can download 2.0 for free on droidforums. Also, in the Liberty Toolbox (donate version) Liberty Gingerbread is available for download!
So is 2.0 gingerbread or still froyo?
It is froyo
Has anyone else installed this yet? I want some others to wiegh in before I give my opinions about the ROM.
Yea, My first impression is that it's a lot like 1.5, in fact at a glance you can't tell the difference. I'm at work and have not got to play with it a lot yet though.
Ben's said:
Has anyone else installed this yet? I want some others to wiegh in before I give my opinions about the ROM.
Click to expand...
Click to collapse
Will we still have to go back to froyo if we have rooted gingerbread??
tyvallely said:
Will we still have to go back to froyo if we have rooted gingerbread??
Click to expand...
Click to collapse
You will need to SBF back to Froyo 2.3.340 yes.
I am not yet impressed with 2.0. I mean, yes it's snappy and quick but I don't see what the hype was all about. It is stripped down and apps open quickly but, there isn't a whole lot of change from 1.5
I think this is the best it will get. Unless you theme 2.0 or any other Liberty version, it's plain as plain can be. If your looking for speed and willing to do a lot of the work your self as far as theming and improving the ui look, I was kinda of let down by 2.0. Everyone praises how great it is...am I missing something here, lol?
I liked 1.5, but it had a couple bugs. I am hoping those bugs will be gone completely in 2.0. I was also hoping 2.0 would bring something new and cool to the table, but I really don't see it. I tried a couple other roms, and I thought liberty was faster than any of the others I tried. To early to tell if the bugs are fixed in 2.0.
I am getting a force close when I try to open liberty settings in 2.0. Other than that no real negatives yet.
For anyone looking I just found the settings force close fix on twitter.
Force close in liberty settings fix: download toolbox > access liberty settings by pressing menu> settings in the toolbox.
Click to expand...
Click to collapse
Let me retract my previous statements lol. Battery life is amaaaazing so far! I themed 2.0 and man-o-man....2.0 is running quite fast! There isn't a single issue for me. I installed the two Liberty Tool Boxes from the Market and that stopped the FCs when opening the Liberty settings. Other then that, holly molly is alls I have to say!
This is now a true 5 star ROM, all the way! Loading this to me gf's DX!! Locked bootloaders are a thing of the past once you really get this ROM going.
This doesnt seem better than rubix? seems like it comes with more crap I dont need.
Pitnefor said:
This doesnt seem better than rubix? seems like it comes with more crap I dont need.
Click to expand...
Click to collapse
More crap? Like what? Gmail, LoL?
Liberty 2.0 is pure speed. It will need to be themed if you are looking for eye candy.
Pitnefor said:
This doesnt seem better than rubix? seems like it comes with more crap I dont need.
Click to expand...
Click to collapse
It's easy to remove the bloat from Liberty. Take the time to read the OP before you look a gift horse in the mouth. Jerk.
Help please! My Droid X got stock on the Liberty boot screen while flashing, I cannot go back to recovery. I tried holding camera, volume down & power and it still boots the liberty boot screen stays their, I tried power, home and search and nothing their either back to liberty symbol. Help please! All and every suggestion will be tried.
Thanks
Sent from my SPH-D700 using XDA App
[email protected] said:
Help please! My Droid X got stock on the Liberty boot screen while flashing, I cannot go back to recovery. I tried holding camera, volume down & power and it still boots the liberty boot screen stays their, I tried power, home and search and nothing their either back to liberty symbol. Help please! All and every suggestion will be tried.
Thanks
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Were you running Froyo or Gingerbread? Did you wipe data/Cache before or after installing installing Liberty 2.0?
I used the wipe data/cache in the install que in the new Liberty Toolbox.
Ben's said:
Were you running Froyo or Gingerbread? Did you wipe data/Cache before or after installing installing Liberty 2.0?
I used the wipe data/cache in the install que in the new Liberty Toolbox.
Click to expand...
Click to collapse
I was using rooted Gingerbread, I wiped cache before, I never made it to fully flash liberty, it's still doing the same thing is there a file I can put on my computer to restart it?
Sent from my SPH-D700 using XDA App
[email protected] said:
I was using rooted Gingerbread, I wiped cache before, I never made it to fully flash liberty, it's still doing the same thing is there a file I can put on my computer to restart it?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
you have to sbf back before flashing
[email protected] said:
I was using rooted Gingerbread, I wiped cache before, I never made it to fully flash liberty, it's still doing the same thing is there a file I can put on my computer to restart it?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
As funnyface and my first post stated, if you are on Gingerbread, you will need to SBF with RSD Lite to 2.3.340.
Sent from my DROIDX using XDA App
Ben's said:
As funnyface and my first post stated, if you are on Gingerbread, you will need to SBF with RSD Lite to 2.3.340.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Sorry I am a total NOOB, What is SBF with RSD Lite to 2.3.340? and could you point me to that direction if is a link, meanwhile I'll be googling away my noobness!
if you have a link by any chance please post....
Thanks
Funnyface19 said:
you have to sbf back before flashing
Click to expand...
Click to collapse
Thanks for your responses now I just have to figure out what SBF is?
We've gotten alot of response from the Desire community so thank you all for your help. At this time we do not need any more testers for the desire. BootManager should be updated with support for the Htc Desire in the next few days. The app currently won't support rom's that use apps2sd and data2sd but our team is working on getting support for those as well. Thanks.
Hey guys my team has developed an app called bootmanager which went into the market today. The app let's you install rom's to your sdcard and boot between them. I had originally done an inc only version here that used your recovery for installing rom's. The new app installs the rom's directly through the app and then let's you boot between them. Anyway on to the point of this post...i'm looking for 1 or 2 beta testers to add support for the desire. You'll need a little knowledge of adb, root of course, and just a little bit of patience. So far has worked pretty well on every htc device wev'e tried so I'm confident we can add support for the desire as well. You can get a little more info about the app from the link in my sig or looking at it in the market. If your interested pm me so I can get the info needed for the desire(.i.e partition sizes and a few other things that i'll tell you how to find in adb) and I'll send the apk for you to try. Thanks for your help....
Very interesting app! Would hboot have to be compatible (ie right size) with all the installed roms or as they are installed to SD does it not matter?
all43 said:
Very interesting app! Would hboot have to be compatible (ie right size) with all the installed roms or as they are installed to SD does it not matter?
Click to expand...
Click to collapse
by hboot your refferring to the bootloader? This doesn't change the bootloader. It makes img's on your sdcard which hold your system/data/cache files for the rom, then it edits the boot.img for that rom to point to those img's when booting. Then the app flashes the boot.img for the rom you want to boot too.
I would be very interested in trying this out as I pretty much change my ROM on a daily to weekly basis haha, I just can't stop! This would be a good way to nurture my need for all the ROMs I switch between all of the time.
Would this app work on a non rooted phone? I mean having the stock ROM in the phone and a rooted one on the SDcard. But I guess it wouln't...
gauco said:
Would this app work on a non rooted phone? I mean having the stock ROM in the phone and a rooted one on the SDcard. But I guess it wouln't...
Click to expand...
Click to collapse
No you need an unlocked bootloader to switch the boot.img. And root to do a number of other things involved in setting up the rom.
lathanub said:
I would be very interested in trying this out as I pretty much change my ROM on a daily to weekly basis haha, I just can't stop! This would be a good way to nurture my need for all the ROMs I switch between all of the time.
Click to expand...
Click to collapse
Once you go MIUI you don't go back I can't bring myself to use anything else LOL!
Oh I tried MIUI-XJ, it's nice to know that you're happy with it ^^ I used it for about three to four days and felt that I was using an iPhone more so than an Android and I prefer the feel/look of Android devices... I loved being able to theme it so easily, though. I like the transparency mods in NeoPhyte ROMs and bits and pieces of many others... I should just figure out how to make my own.
I hope that you got my response, Conap! My sent items folder said I hadn't sent anything but I am most positive that I did so I will wait to hear back from you =D.
Yeah, sure I could help with the testing... Do you want somebody with that knows ADB etc..?
got Miui XJ on phone rom and tried to boot CM7.
working without problems so far!
thank you. gonna look into this now
Should we run the update after the rom has been installed, so it updates the boot.img ? Haven't tried running the update.zip directly from bootmanager yet, but works fine from recovery.
Installed MIUI-108050 on my HTC Desire (stock boot/S-ON)
looks fantastic....im new to android and my desire but i am currently using neo's reflex s rom and i love it...i really want to try MIUI but i love reflex!
Gonna sticky this thread, keep up the hard work
i tried to install cm7 on rom slot1 but it says no rom installed when i tried to boot it.. on htc desire (running custom official gingerbread).. any idea?
yeahman45 said:
i tried to install cm7 on rom slot1 but it says no rom installed when i tried to boot it.. on htc desire (running custom official gingerbread).. any idea?
Click to expand...
Click to collapse
+1
me too installed rom in slot 1 try to run it
and then it says no rom installed
Great app, I currently have successfully installed and used on my Desire, Leedroid 3.0.8.2, Redux 1.2, Miui xj1.7.22 and Cyanogmod on slots, with Oxygen as the phone rom!
sebastiaan15 said:
+1
me too installed rom in slot 1 try to run it
and then it says no rom installed
Click to expand...
Click to collapse
+2
installed in rom slot 1 on my htc desire says no rom
thanks yo much for your nice work man!
I CANT flash any rom on my desire,
thried ext2 and ext4 for all roms, tried the one with a2sd and also tried the roms without a2sd (miui au)
all will fail with this dialog appear "does this rom support ext2?" , and the i can only press 'okay' , then it will clean itself....
whats wrong herre?
maybe not compatible with sense based rom? cuz according to the replies here, only aosp roms seem to work
Hey guys I just made a step down from a galaxy s 4g to the hd2 I installed cm7 2.3.7 SD build ithink and its great but thereis a fue problems that I have
Is it me or is everything supposed to be tiny
It says the phone is not compatible with apps like Firefox and lane splitter I know these work because they do with 2.2
If all I have to do is Chanel log or fix permissions how do I do it I love this rom but these problems are urking my nurves
Edit your build.prop file so that your density is set to 240 (default).
mrlaziman said:
Hey guys I just made a step down from a galaxy s 4g to the hd2 I installed cm7 2.3.7 SD build ithink and its great but thereis a fue problems that I have
Is it me or is everything supposed to be tiny
It says the phone is not compatible with apps like Firefox and lane splitter I know these work because they do with 2.2
If all I have to do is Chanel log or fix permissions how do I do it I love this rom but these problems are urking my nurves
Click to expand...
Click to collapse
Yes, follow the post above, and read the OP in future
mrlaziman said:
Hey guys I just made a step down from a galaxy s 4g to the hd2 I installed cm7 2.3.7 SD build ithink and its great but thereis a fue problems that I have
It says the phone is not compatible with apps like Firefox and lane splitter I know these work because they do with 2.2
This is a known glitch from the market, some devices have problems with it, try looking into http://www.reddit.com/r/Android/comments/ha5oh/root_how_to_edit_your_buildprop_to_make_netflix/ or http://forum.xda-developers.com/showpost.php?p=13735230&postcount=504
That should do it.
If all I have to do is Chanel log or fix permissions how do I do it I love this rom but these problems are urking my nurves
To fix permissions you just have to run ROM manager and click on fix permissions, it will run and you're done. But that personally didn't work for me.
Click to expand...
Click to collapse
I think the best thing to do with the market is downgrade it and keep it that way, I'm gonna try it soon too (have the same probs).
mrlaziman said:
Hey guys I just made a step down from a galaxy s 4g to the hd2 I installed cm7 2.3.7 SD build ithink and its great but thereis a fue problems that I have
Is it me or is everything supposed to be tiny
It says the phone is not compatible with apps like Firefox and lane splitter I know these work because they do with 2.2
If all I have to do is Chanel log or fix permissions how do I do it I love this rom but these problems are urking my nurves
Click to expand...
Click to collapse
- You can change the dpi to get bigger icons (standard = 240)
- Have you installed the newest market? if so, try the old one
- Disable compatible mode in spare parts
- Fix permissions is in the cwm menu
Search a little bit, and you will find
Thanks guys appreciate this alot hope it works how can I downgrade my market when I download it it doesn't. Install
mrlaziman said:
Thanks guys appreciate this alot hope it works how can I downgrade my market when I download it it doesn't. Install
Click to expand...
Click to collapse
Settings --> Applications --> All --> Market --> Uninstall Updates
This should do the trick for you.......
Thanks ill try that ...... I domt want to b a pain in the -*- but I did the build.prop stuff like 5 times abd it just goes back to 165 instead of 240 and I do click save and exit
Try to do it through the phone directly. Get ES file explorer through android market, its free and it will let you change the build.prop. Just don't forget to give it superuser permissions.
Hope this one helps.
-----------------------------------
HTC HD2
ACA GB 237 CM7
kernel 2.6.32.15
NAND Android ROCKS!
+1. And if that doesn't work, you can try Root Explorer. It costs about $5 through the market, but it has always done anything I need it to do.