I am looking for the ## codes for the fascinate. I am sure that someone is able to find them. I have searched the web for hours and not found any that will work with the fascinate. I am only looking, because I am sure that just like my incredible I can change the IP settings and use the wifi tethering for free on the fascinate too.
I appreciate any and all help to get these codes.
Have you tried the codes that work on the international I9000, Samsung's first Galaxy S model?
Thanks for the link. I tried about half of those and none of them work. I think their must be a set of codes specific to the CDMA version.
I was able to get a few codes out of a verizon represenative, but not everything.
This code enables the ability to use the second code I got.
*#22745927
you then enter 000000 for the spc
and change to Hiddenmenu Enable and press ok.
the type **772
you then enter 000000 for the spc
This will enable you to manually program the NAM.
Now I just need the code to modify the network settings for the data portion of the phone.
candrist said:
I was able to get a few codes out of a verizon represenative, but not everything.
This code enables the ability to use the second code I got.
*#22745927
you then enter 000000 for the spc
and change to Hiddenmenu Enable and press ok.
the type **772
you then enter 000000 for the spc
This will enable you to manually program the NAM.
Now I just need the code to modify the network settings for the data portion of the phone.
Click to expand...
Click to collapse
Verizon told me to do *228 option 2 to re-sync roaming towers to get a better signal.
Related
Does anyone know how to unlock and change the carrier provisioning for the HTC Shift? I have a Shift without Sprint service and would like to use it on another carrier. Is there a PST for the Shift?
I have just noticed that there is an EPST under Settings/Activate. Does anyone know the Sprint Unlock code?
shaunks said:
I have just noticed that there is an EPST under Settings/Activate. Does anyone know the Sprint Unlock code?
Click to expand...
Click to collapse
You can use this program, but runs in Windows Mobile, I ran it on my HTC Mogul, you have to put the ESN (hex) of your shift and press the button, then you get the SPC Code.
http://www.rafaelc.net/files/GetSPC.zip
But the EPST of the Shift only enables you to change the MDN and MSIL, not the PRL or another data
Here is all the info I have on sprint:
554181 activation password(this worked for getting into Activation and EPST)
909387 one time password(didnt work for me)
enter programming mode ##3282#(EPST Advanced)
Hard Reset for Radio
##786#
Hopefully this will help you get somewhere with verizon or whoever.
G
Thanks, the advanced EPST works (I have anoter SPC Code but I used the GetSPC program), I changed all the configuration that I need (as I did with my Mogul)
Now I'm connected with Iusacell, my carrier in Mexico
Regards
excellent, curious how you were able to change the roaming list to go to your towers instead of looking for the sprint towers?
G
GuardianZX9 said:
excellent, curious how you were able to change the roaming list to go to your towers instead of looking for the sprint towers?
G
Click to expand...
Click to collapse
My local carrier gave me a PRL file for my location
Ok, so i need to change some of the settings in EPST. Cant change a good portion of what i can see/view, yet on the Eris, there's a full working EPST and you can basicly edit anything you can see. Is there something im missing or need to do to make the values editable and or has anyone tried to use the Eris EPST on the Hero?
Thanks, in advance..
need password to edit EPST on Hero
When accessing the EPST on the Hero, I get:
1. View Mode
and
2. Edit Mode
View mode has two options:
1. User Name (Active Profile, user Name, SPI MN-HA, SPI MN-AAA, Reverse Tunnel Preferred, Home IP, Primare Home Agent, Second Hoome Agent, DSA Server URL)
and
2. Advanced [ESN(dec), MEID(hex), P_REV, SCM, Slot Mode, Slot Cycle Index, MCC, MNC, MSID, ACCOL, Vocoder, Home Orig, Roam Orig, Home Sys Reg, Foreign SID Reg, Foreign NID Reg, MN HA SPI Set, MN AAA SPI Set, Home SID/NID #1]
Edit Mode has:
A Password Protect!!! Hence the post
Anyone know the password, or how to obtain it?
That's your MSL number. There is a thread that has a step by step on how to get it. I got mine that way but don't remember at all which one is it. Search MSL number and stuff like that and you should find it.
Sprint will give u the msl number. It may be tricky. Like call up and say data isn't working and say u can't make it to a store. Something like that or just try asking for it. They may give u some kinda run around. But they can and will give it to u. I had issues with my diamond and data not working. I called up and they actually had me go into epst and gave me the password and all. I think though they had me look at it first and see if a setting had a 1 or a 0 by it and it had a 0. So then they asked me to go in and edit it and put a 1 on instead. Anyhow it went something like that. Is say to call up and ask or give them a line of **** and ill most likely get it. Good luck
Sorry for possible misinformation... my new phone does not use the same codes as the other F3...
After hours of waiting in hold with Virgin mobile I was able to finally get the codes that manually allow you to program your phone to virgin mobile. The code you need is ##031373# it allows you to enter your Mdn and msid. This way if their stupid auto progrm does not work you can still get it to work. you type it in the dialer window for those of you unfamiliar with VM programing.
Is there is a different code for each phone???... bought a new optimus F3 and found out that the code did not work but the code for my new phone is ##962544#
This is for the Virgin Mobile Models. if you want to factory reset you can use the code ##786#
And if for some reason you need to reset the auto program feture so that the next time you boot up it will try to program the phone you can use code ##72786##
After much searching I haven't found anything that directly says if this is disabled. Back on my Galaxy S5 I was able to enable the mobile hotspot by going in the dialer screen entering ##data# > Edit > entering my MSL > Going to apn EHRPD and go to type then changing it from (default, mms) to (default, mms, dun).
Couple of things. I reached out to Sprint for my new MSL and they said there is not one for my phone, it actually shows up as 000000. I tried using that and I can successfully get into my edit screen but now I cannot change the APN type, that is grayed out.
I can only change the APN and APN protocol.
Is this something that is locked down by Sprint? Is the 000000 MSL the issue?
Any help enabling the mobile hotspot without paying extra or rooting the device would be greatly appreciated.
I was looking at the same thing.
In the last few pages of this S7 thread;
https://forum.xda-developers.com/sp...mes-apps/hotspot-mod-root-wip-3-4-16-t3328796
people talk about the menu items being disabled by an update.
VaderSS said:
I was looking at the same thing.
In the last few pages of this S7 thread;
https://forum.xda-developers.com/sp...mes-apps/hotspot-mod-root-wip-3-4-16-t3328796
people talk about the menu items being disabled by an update.
Click to expand...
Click to collapse
Dude its been driving me nuts. It was so easy to get the MSL and edit my Galaxy S5. Now it seems maybe the provisioning from Sprint has it locked down. I can confirm its not locked in my G5 running lollipop.
Even with the MSL entered there isn't much you can edit in that data area.
Hopefully someone finds a way
I came from an early S4 that I never took an OTA update on, so it's still wide open. I probably should have gotten an international version S8...
hi,
trying to use my unlocked ls993 in Verizon. voice and text work, but no data. the apn setting is missing all together, so can not add apn.
when putting in a tmobile sim, the apn appears and I can add t apn and data works.
any suggestions to make the v apn appears?
thanks.
I can help, go to your dialer and from there type *#546368#*993#
Then navigate to field test then navigate and there should be the second option. Go to pdp and then apn then you can add it from there.
iliioPlay said:
I can help, go to your dialer and from there type *#546368#*993#
Then navigate to field test then navigate and there should be the second option. Go to pdp and then apn then you can add it from there.
Click to expand...
Click to collapse
Code not working on my LS993, but thank you for trying to help Still looking for the code for this model.
So just found out the code that worked in my LS993 is:
5689#*993#
(credit: https://idealkaynak.net/lg-g6-hidden-menu-kodlari/)
With that I added xfinity mobile apn. Once saved I had data, but was connected with 3G only, with DL speed of 0.8MPS. I was not happy, thought reboot the phone might make it better. Rebooted, then I lost data connection altogether; call and text still work, no apn in control but with the hidden menu access I see my apn is still there.
So I am stuck again. Any suggestions? Is there anyway I can force the g6 to load "carrier settings" of some sort?
Hi, did you find a way to add the APN. I have the same issue.
same problem
i have the same problem and checking on other post a guy says that you have to enter on hidden menu and apn settings and there are two options edit and view. chose edit and erase all apn including otasn after that have to appear in the normal mobile network menu the three dots to add the apn of your cellphone company. but you need the msl code or service code.
any suggestions of how to get the msl code and try this ?
i have an LG G6 LS993ZVA NOUGHAT FROM SPRINT.