Windows 7 can't flash HTC Magic - myTouch 3G, Magic General

Hi, I am trying to flash the official rom for my Magic, but I have the following error msg :
ERROR[170]: USB CONNECTION ERROR
i am just wondering how can I solve this problem ?
Thanks in advance

Related

After upgrare Stucked at boot screen

Artemis and PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
i tried to upgrade my o2 arte200,i waited 30min. but installation frozen.
i did reset but after reset my phone stucked at bootscreen
IPL : 1.25.0001
SPL: 1.25.0000
GSM : 02.67.90
OS : 1.28.0.0
Please help... i tried hard reset and soft reset ... but no way...
when i plug usb cable activeSync dont recognise phone
same problem here,
help needed in advance
Active sync is usable only with Windows booted device. If Windows isn't able to boot, you must enter into bootloader, plug usb cable and then start rom flashing.
hi sir
i entered bootloader screen,connected usb cable ... (i can connect using mtty)
i run the software "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
but gets an error message " cant connect to the phone"
WHY ???
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
is a Rom for the Wizard not for the Artemis.
You need the original ROM so you have to search for the O2 ARTE200 ROM. The language of the ROM has to be correct as well.
how do you get the phone into the bootloader?
Tha said:
how do you get the phone into the bootloader?
Click to expand...
Click to collapse
Press and hold the record button and then do a reset.
no it doesn't work
My DOPOD was in the same trouble. I got the same vender ID error. Does anyone know where to get the original DOPOD P800 chinese ROM?
The same problem has I also.
My ROM upgrade ended bad. Test of installing of different ( I have already them probably 12) the INVALID ends VENDOR ID
I it can not now to remove CID nor to find out what it has it CID HTC__001 does not it fit. T - MOB 005 does not it fit.
I look for original romu from Dngaard ( DK)
Someone knows what CID maybe it is in HTC 3300. I have HTC P3300 is distributed would to Dangaard.
Where from him download
I greet
Irek ( POLAND)
im having the same problem on the o2 orbit ( need a orignal rom
upgrading
hai i am stuck in o2 orbit flashing in bootloader mode
help needed urgent
i got it working after i found the original german rom...loaded the orbit into the bootloader screen with 3 colors....plugged in the usb cable..then ran the german rom, after a few mins it reset and the orbit loaded up...after that i followed these steps to get it into english
http://forum.xda-developers.com/showthread.php?t=290241
flashed it with the tmobileuk 1.13 shipped file. everything is ok now.
cbprod said:
i got it working after i found the original german rom....
Click to expand...
Click to collapse
Where do you find the orginal rom?
Please help us!
send me a pm with your email, i'll send it to you
got mine back from the repair center friday.
no cost at all, fixed
route said:
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
Click to expand...
Click to collapse
could you tell me how did you manage to conect your phone? i have the same problem and i can't get my palm recognized by windows...
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
xister said:
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
Click to expand...
Click to collapse
is that the o2 UK rom or the German one

Help!! Error 260

I just tried to install Rom v2.00.02 PV for HTC Artemis ( Crossbow Style ) on my htc p3300 and the phone doesn't start. Them i tried to go to the bootloader and restore to the original rom but when i try the program say that "Error 260 : Update error" " The update utility cannot connect to your pda phone...."
I dont know what to do.
My original rom is :HTC_1.12.405.01_026790_WWE_SHIP
Thanks
I just soved the problem. I was using Windows Vista and it was unable to connect to the pda in bootloader screen. I tried'it in windows XP and voilá the pda came back to life.
Thanks.
Pedro Silva
I had the same issue with mine, except it worked when i flashed it to mobile 6 but after it sucked

Error with SPL, Error 260: Connection

Hi,
Im having trouble doing a hard SPL on my Polaris with
ROM WM6.1 PRO 3.13.413.0 SVE
Radio 1.59.42.15
Ive tried
http://forum.xda-developers.com/showthread.php?t=351964
Doing it as it says and then i get the connection 260 problem. I am connected to the device with active sync so it can't be that and im running XP SP3.
When i then try this
http://forum.xda-developers.com/showthread.php?t=321873&page=3
I can't manage to enter bootloader using CAMERA-POWER-RESET not even after watching this http://www.youtube.com/watch?v=dWmgl6hqqqQ
Should i try this guide? http://forum.xda-developers.com/showthread.php?t=425922
or this WM5 Downgrade Guide (dead link)
Thx for the help
I fixed it =)
I first ran the Hard-SPL-V2 and when it got the 260 error in bootloader i just replugged the cable and ran the program again. So now im gonna install a sweet 6.5 rom on instead !!!!
Hope this will help some1 else =)

Solution for invalid update tool ??repairable or brick ?

plz help me .after i try instal a new rom ( i did it wrong way)i am stuck in color boot mode screen(pushing record +power buton)
i downloaded several rooms but it give me "error 300 invalid update tool" and the message that say get a newer update utility
i try the original rom (HTC_1.12.405.01_026790_WWE_SHIP) with no result.I try the original cd that came with the device ...oficial rom downloaded from htc club...nothing !
My device is already unlocked and I have used several ROMs earlier...
IPL 3.13.0001
SPL 1.11.0000
did someone find any solution to this problem ??!!
Thx.
still no solution ? mtty comands or something ...

Experts where are u?????

Hi,
I am facing Error 260 on my HD2 and can't even install original rom ....
Currently, using ttyung Brilliant Nexus HD 2.3 Nand Rom...
Reason to flash back to original rom, as I have to send it back to the service center due to hardware issues
"Error [260] : Connection
update utility cannot connect to your PDA phone."
Thanks for your time.... cheers!!!

Categories

Resources