Hi All,
Newbie here so please be nice :wink:
I have only had my XDA Mini for a few weeks now and have just tried to copy files from the PC straight to the storage card via Activesync. I open Activesync and click on 'File' then 'Explore'. The explorer window opens but I get this message...
"Critical communications services have failed to start. Try resetting the mobile device, and then connect again."
I have reset the mini and rebooted my PC many times but it has made no difference. What does it mean and how do I fix this problem?
I believe this is an issue with the built in XP firewall... Install another firewall, disable the built-in one and try again.
Hi,
I have the problem as well from time to time. As an alternative I found out, that you can place files in \My document\<Device name>_Syncronised Files (or similar, sorry I use the german version). If you acitivate ActiveSync feature of syncing files, these files will be transfered to the device. You cannot access the memory card this way but at least you can transfer files even if the 'Explore' funtion is not working.
regards
marco
Thanks Guys.
Marco, I have been downloading via My Documents without any problems. The problem here is that I am limited to the memory on my device. I need to download straight to the Storage Card as the files are larger then the internal memory.
Sunoke, ill try the Firewall thing and see how I go.
i've tried to install AIM... and a webcam program.. both of which install through active sync.. however everytime I try I get the following message on my phone...
"Installation of (whatever).CAB was unsuccessful." and that's about all I get.
Also whenever I connect the phone to my PC is says it's unable to successfully syncronize and asks me to reconnect the device.
MS's support site has been less than helpful... any help you all can give would be greatly appriciated....
Installation problems.....
I am having the same problem too.
Even after a hard reset when I try and install Sprite Backup & Agenda Fusion I keep getting the install error: 'cannot be installed, try another location'
It's driving me up the wall! I would have thought after a hard reset this wouldn't be an issue. I'm now the proud owner of an MDA Pro (Universal) that I can't use because the software I want to install won't install.
Can anyone help me please?
Hi,
Couple of things you might consider / try: -
Establish an activesync connection, then use the "explore" button, navigate to your staorage card, and manually copying the .cab file from your pc to the storage card.
Then on the treo go to file explorer, storage card, and run the cab from the card.
The other thing is to check that you're using activesync 4.1 or later - updates are a free download from MS.
Hope this helps
Angus
Thank you for your suggestions.
Unfortunately i've already tried copying the CAB files straight to the device and launching them produces exactly the same result.
I'm also already using Activesync 4.2 latest version.
Is there anything else I can try?
judging from your sig, you're using a pretty old rom version... I would definitly upgrade it and then give it another go...
Hi guys,
Just got my new Touch Diamond on Thursday and so I'm trying out all the awesome software on here! Except I can't...
I've installed Advanced Config, GSen, and Diamond TF3D Config. I've tried to install:
-DiamondHologram
-TomTom 7 for Diamond (TTN_7.450.9028.cab)
I just get a notification saying "Installation of name of cab was unsuccessful".
I haven't done any ROM upgrades, unlocks. I have only installed the new Google Maps 2.2.0.19 and the .NET 3.5.
Is there any reason why I can't install these applications? It's doing me nuts because I can't install half of these wicked apps!
Thanks guys
James
Can anyone help? Please?!?
Same here... and i'm going mad. Seems this issue affects random cabs. I succesfully installed your same TomTom version, but I can't install G-sensor Calibrate, or even TotalCommander...
I tried to update to Project V3.3 but issue is still there with the same cabs.
Any ideas?
I also tried disabling security warning by using Schap's Advanced Config. Nothing changed.
random
as you said it is a random effect... same prb here.... but i saw something odd...
i downloaded a cab with opera installed on htc and selected "open" when it asks what to do with the file... download complete but instalation unsuccessfull.
i've downloaded the same file but saved it on the storage and after that i installed... and surprise it worked! maybe it is a memory prblm.... i don't know!
this method does'nt work with every cab
Weird thing! I re-downloaded two cabs, moved to diamond... installation succeded. But i still not know if it was because of corrupted cabs or a Diamond problem.
Anyway I'll try to do a simple cab corruption check (try open the cab with a compressor like 7zip wich is free) for the next cabs.
Just for ask: did you download your "cannot install" cab with a download manager?
parlato_edoardo said:
Weird thing! I re-downloaded two cabs, moved to diamond... installation succeded. But i still not know if it was because of corrupted cabs or a Diamond problem.
Anyway I'll try to do a simple cab corruption check (try open the cab with a compressor like 7zip wich is free) for the next cabs.
Just for ask: did you download your "cannot install" cab with a download manager?
Click to expand...
Click to collapse
no... just using opera from the diamond
Same problem here... I have some CABs which dont fail and some which fail... Very anoying problem
I confirm i solved my problems by downloading WITHOUT any download manager or download accelerator all cabs on my pc, then check them with 7zip, then copy to my Diamond and install.
It's a bit strange way to get cabs installed but it's a safe method.
You can also choose to use download managers or download with your pda to download cabs, but you have to check them later if they don't install and... re-download them.
I also found solution which someone could explain....
I upload all SW using active sync and not USB drive and all what was not working now works.
So what is wrong here?
thedino said:
I also found solution which someone could explain....
I upload all SW using active sync and not USB drive and all what was not working now works.
So what is wrong here?
Click to expand...
Click to collapse
I have the same problem when the device - an o2 XDA Diamond - is connected in "Disk Drive" mode.
Whenever I transfer files from a Windows Server 2003 system (w/o Service Pack) to the "Internal Storage" of my Diamond the files become corrupted on the device.
This happens with any file type, but only with larger files - they become corrupted when they are several megabytes in size.
This doesn't happen randomly, it happens every time.
Reading large files from the "Internal Storage" works without problems.
When I transfer the very same files from a Windows XP system then they are OK on the device.
Also when I transfer the files in "Active Sync" mode the files are OK, but the "Active Sync" transfers are randomly aborted and the sync is lost.
I knew I'm not the only one with that problem, but I never found any information.
The ROM is the newest official one, 1.93.207.2.
Of course the Windows Server 2003 system transfers large files to other flash storages - camera, card reader and other Pocket PCs - without any problems.
My only advice is to transfer the cab to your internal storage using disk drive option the disconnect your Diamond and see if that works. e.g navigate to the cab using diamond file explorer then double tap on cab should install ok then
Sorry, doesn't work for me, but I thought that it was clear. (Because I wrote all info, like Service Pack, etc.)
buffystar said:
My only advice is to transfer the cab to your internal storage using disk drive option the disconnect your Diamond and see if that works. e.g navigate to the cab using diamond file explorer then double tap on cab should install ok then
Click to expand...
Click to collapse
You dont understand this... The file is corrupted while transfering via USB Drive but OK if we use ActiveSync... We know how to install CAB files. there is not problem.
BTW, I have Win2000 so it might be same as mentioned 2003...
I will try on another system and see how it works.
I just installed Windows XP SP3 on my machine: SAME PROBLEM!!
thedino, what mainboard do you have and how old is it and what is its USB version (1.0, 1.1, 2.0)? I have a K7S5A with USB 1.1.
For now I have to assume that HTC produced crap and that I'm gonna send my Diamond back.
I bought an USB card for PCI and there is no problem when connecting the HTC Diamond to this card.
No data corruption at all.
So obviously it must be something with onboard USB chipsets, but it's definitely a problem on HTC's side,
else these onboard USB chipsets wouldn't work correctly with any other USB device.
jameshpg said:
Hi guys,
Just got my new Touch Diamond on Thursday and so I'm trying out all the awesome software on here! Except I can't...
I've installed Advanced Config, GSen, and Diamond TF3D Config. I've tried to install:
-DiamondHologram
-TomTom 7 for Diamond (TTN_7.450.9028.cab)
I just get a notification saying "Installation of name of cab was unsuccessful".
I haven't done any ROM upgrades, unlocks. I have only installed the new Google Maps 2.2.0.19 and the .NET 3.5.
Is there any reason why I can't install these applications? It's doing me nuts because I can't install half of these wicked apps!
Thanks guys
James
Click to expand...
Click to collapse
I had the same problem (either "installation unsuccessful" or just gets stuck during installation). I was using changescreen v2.5 for handling the display rotation. Apparently this software has a conflict with the .cab installer. It was enough to disable changescreen, then run the .cab, then re-activate changescreen again.
Hope that this helps.
maTTeo
Temporary Fix
Try this
Rename the cab file with a different extension, eg TotalCommander.cab to TotalCommander.txt. Do this on your computer.
Select the file within Windows Explorer and do the usual "Edit -->Copy" to copy the file.
Establish ActiveSync connection with your Diamond and using "File Management" select the Internal Storage of your Diamond. Then select "Paste" to paste the file into the internal storage of your DIamond. Rename the file back to having the .cab file extension by using the explorer shell you opened through ActiveSync.
Unplug Diamond from the USB and ensure ActiveSync on your Diamond is not active. Using file explorer program on your Diamond tap on the cab to install it.
The only alternative is uninstall all extra apps you have put on one by one and try to install other cabs as some of these may conflict with the cab install OR you can update your ROM from the 1.93 series to the 2 series.
Let me know if this temporary fix works. Best of luck.
Aussie
Hi all,
I myself have a Touch Pro 2 with windows mobile 6.5 and i'm able to access the storage card via File Explorer...
My girlfriend has got the new HTC Wildfire with Android os but i cant seem to find a way of accessing the storage card on the phone....is it possible? i know i can connect it to pc and access it but i wanted to access it on the actual phone.
Cheers
SOLVED
stepicken said:
Hi all,
I myself have a Touch Pro 2 with windows mobile 6.5 and i'm able to access the storage card via File Explorer...
My girlfriend has got the new HTC Wildfire with Android os but i cant seem to find a way of accessing the storage card on the phone....is it possible? i know i can connect it to pc and access it but i wanted to access it on the actual phone.
Cheers
Click to expand...
Click to collapse
Ok so here is a simple solution .. just tap on the bottom left arrow on your wildfire screen .. this will open apps... Now go to market and enter search term "File Manager" there are lot of options available there.. ALTERNATIVELY you can tap the Market shortcut on ur home screen (If its there).. >> and search as stated above.
Note :: I am using Androzip...which is very good... there are other good ones too like Astro and Linda.. you can directly search these names too...
Thank you very much.
im having trouble loading XAP files to my HD2, i have the tom's installer and they load onto the phone that appears on the computer but when you go and click on each item to install they all have a different reason for not loading some talk about dll files and the camera give a longer error message. i would like to get this all fixed before i try and load the android onto the phone thanks for your help. i used the Tech1 Easy DWI Installer to get wp7 on my phone.
I dont know what camera is in the WP7 file that i loaded but it seams to work fine there is a list of XAP on the HTC HD2 site that i have tried with no luck.
Thanks for any help
anyone able to help
I can't install .xap too, but for me the Tom Xap installer gives mee an error saying to check the Phone is unlocked & Zune is launched.
& i checked on the phone, app isn't here.
When i installed the Rom the 1st time, Zune made 2updates itself, maybe it's the cause. (But i updated with DEV_UNLOCK.cab)
So i wonder if i've to reflash? due to encrypting of the SD card, there wont be any issue?
you must do hard reset after upgrade to Mango RTM.... go to Settings, About, Reset
I was getting the check phone to make sure it was unlocked error also i think what took care of that problem was in the tom's i checked the emulator instead of device.
[solved] XAP can't sideload
It missed the hardreset after the first installation as well. But it's essencial and everything works afterwards perfectly!!! Nice
Hi
I have done the reset after installation, but still cant load xap files.
Tried with Toms but it gives back an error "phone not connected ....."
When I look in the meny on the phoneAdvanced config is there but when I try to execute
I closes after 5sec.
Anyone Please.
Sorry for my bad English
/segepe