Database Users

GPRS Monitor

I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?

Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.

No problem thanks for your help

dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz

Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.

Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.

It works a treat. Thanks muchly!

Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:

I also managed to 'locate' another copy and it works fine, thanks for all the help.

astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.

Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?

Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!

sorry ignore that post! Work computer blocked the file out

I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.

Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob

Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.

Tried it. Still get the problem :-(

My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.

Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.

I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.

The file 'IntShrUI' cannot be opened. Either it is not signed with

Ok found ICSinstall.cab on here and installed it, soft reset, and attempted to install the latest version of the WMWifiRouter program (which I finally succeeded in sourcing!).
However I get a message telling me cryptically that it 'cannot be installed' after attempting install. I wonder if this is related to ICS...
I now have the InShrUI.exe file in /windows/ *but* attempting to run it gives:
'The file 'IntShrUI' cannot be opened. Either it is not signed with a trusted certificate or one of it's components cannot be found. You might need to reinstall or restore this file.'
I reinstalled it over itself (i.e. ran the cab again) same error.
:-/
Was this the right file? I seem to remember it was dated 11th January 2008??
Thanks again for hte help folks!
I should say I'm running Microsoft Windows Mobile Version 5.0 (OS5.1.195 (build 14955.2.3.0).
Lastly I should say I've started a new topic as the last one was getting a bit off topic my original concern having been answered :-D (thanks guys!)

probably you only opened a shortcut (*.ink) and the shortcut pointed to a not existing file. Another thing is that it also was intsalled correctly (the *.exe), but the dll's or whatever are not installed.
Regards

Thanks. I'll try redownloading and repeating.
I was wondering if the file needed signed with some unique private key or something?
Anyways will give it a shot and report back

softonic123 said:
probably you only opened a shortcut (*.ink) and the shortcut pointed to a not existing file. Another thing is that it also was intsalled correctly (the *.exe), but the dll's or whatever are not installed.
Regards
Click to expand...
Click to collapse
Thanks for your suggestion I'm now a tiny bit further on.
On soft resetting the PPC I get the following error:
'Pocket PC Networking
Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network settings.'
InShrUI is still giving the same error as before (and it's definately the .exe file I'm clicking).
However the improvement is: This time WMWifiRouter succeeded in installing...
However the same PPC networking error occurred during the install. I could probably tweak whatever is causing that error to use a static IP address rather than DHCP probably...but it's kind of dodging the problem.
And as said before I can't launch IntShrUI without getting that error. This time there is a shortcut to it though in program files.
I should also say that neither the executable or the shortcut has an Icon Image (i.e. it's the default no icon blank) so I suppose it might be the .exe file that's corrupt (since the shortcut get's it's icon from there I think?).
Last but not least:
WMWifiRouter reads:
Code:
'Not Connected'
Waiting for connection
I suspect the problem must lie with InShrUI but then again I'm a noob so I'll wait for the XDA gods to come and share their wisdom!

MrVarioII said:
Thanks for your suggestion I'm now a tiny bit further on.
On soft resetting the PPC I get the following error:
'Pocket PC Networking
Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network settings.'
InShrUI is still giving the same error as before (and it's definately the .exe file I'm clicking).
However the improvement is: This time WMWifiRouter succeeded in installing...
However the same PPC networking error occurred during the install. I could probably tweak whatever is causing that error to use a static IP address rather than DHCP probably...but it's kind of dodging the problem.
And as said before I can't launch IntShrUI without getting that error. This time there is a shortcut to it though in program files.
I should also say that neither the executable or the shortcut has an Icon Image (i.e. it's the default no icon blank) so I suppose it might be the .exe file that's corrupt (since the shortcut get's it's icon from there I think?).
Last but not least:
WMWifiRouter reads:
Code:
'Not Connected'
Waiting for connection
I suspect the problem must lie with InShrUI but then again I'm a noob so I'll wait for the XDA gods to come and share their wisdom!
Click to expand...
Click to collapse
Is there no1 who can answer this? Anyone got any ideas?
Device is a hermes (T-mobile Vario-II) running WM5.....
There's one MAN point up for grabs for whoever can solve it!

I tried installing WMWifiRouter 0.89 onto a ROM which didn't have ICS included (which meant I had to try the same route you did) onto my Vario 2... I just couldn't get it to work, and I spent a while trying to make it work too.
I'm figuring that there's some deep-seated DLL or system association which ICS needs, which isn't configured if ICS is stripped out of the ROM - I ended up just reflashing with another ROM (the T-Mobile WM6.0 official ROM) and ICS and WMWifiRouter works fine.
Sorry that's not a solution, but it's the only way I could get it to work. Not an expert ROM cooker, so my knowledge of how ICS is stripped / included in ROMs is fairly limited, though I understand the concepts and techniques.

Thanks for your help Christopher.
I considered flashing a working ROM. My worry is about losing all the programs I have installed on the device (it took a long time to get it *this* customised ;-) ) is there any way to flash the new ROM while keeping the old registry entries etc. for registering my programs (Especially those I've bought such as Oxford Handbook of Clinical Medicine - which I cannot register anymore)? ...
Or could I somehow back up the registry and restore it later (I know that's likely to be a dangerous idea...perhaps simply the file associations and programs stuff -the windows mobile section?)
Thanks bro!

MrVarioII said:
Thanks for your help Christopher.
I considered flashing a working ROM. My worry is about losing all the programs I have installed on the device (it took a long time to get it *this* customised ;-) ) is there any way to flash the new ROM while keeping the old registry entries etc. for registering my programs (Especially those I've bought such as Oxford Handbook of Clinical Medicine - which I cannot register anymore)? ...
Or could I somehow back up the registry and restore it later (I know that's likely to be a dangerous idea...perhaps simply the file associations and programs stuff -the windows mobile section?)
Thanks bro!
Click to expand...
Click to collapse
Bumping as no replies for ages
Anyone?

Bumping again as no replies for a week or so

Bumping again to ask if anyone knows a way of slving this without having to reinstall all my programs, re register them, and reconfigure everything? (which I suspect installing a different ROM will do?) is it possible to back up the registry entries for all of my programs then do the ROM upgrade and restore the registry entries from my other programsMost of my programs are installed on the microSD card anyway (i didn't want to use up the main memory and slow the device up).??
If so how?
Thanks again folks !

I have the same problem...
I cant seem to find the answer but will continue to try.

if your programs are installed on your memory card then chances are you should be able to past shortcuts into the programs directory after reflashing. I tend to do this BUT I have found some programs that need to be re-installed or re-registered. Backing up registries can cause SERIOUS problems in itself so I would 1st do a full backup of your system (try spb backup, it backs up EVERYTHING on the phone then re-installs the lot so it seems like you never had a problem..) then flash. Try putting on shortcuts and if you have no luck you have the choice to start again on the new os or reflash to old and then restore backup (old problems wil still be there). Hope this helps.
Ps. I use resco explorer instead of the crap file explorer on the phone. It allows MUCH more versatility to do as I want. Cheers....

Completely Uninstalling programs

Sorry if there is an answer somewhere already, but I have been looking around for 20 minutes and I'm giving up and posting a thread. I have like five programs that won't uninstall when I go into the settings-->remove programs application. It comes up with a message that says "XXXX was not completely removed. Do you want to remove it from the list of installed programs?"
Has anybody had this also? How do I get it completely off my phone/get the memory back?
One more thing, I have a program called "AA AA" and I know for sure that I didn't install a cab with that name, so what the hell is it? I'm a noob with WinMo so sorry if it's simple **** haha.
Thanks in advance

Caribeanbreeze22 said:
Sorry if there is an answer somewhere already, but I have been looking around for 20 minutes and I'm giving up and posting a thread. I have like five programs that won't uninstall when I go into the settings-->remove programs application. It comes up with a message that says "XXXX was not completely removed. Do you want to remove it from the list of installed programs?"
Has anybody had this also? How do I get it completely off my phone/get the memory back?
One more thing, I have a program called "AA AA" and I know for sure that I didn't install a cab with that name, so what the hell is it? I'm a noob with WinMo so sorry if it's simple **** haha.
Thanks in advance
Click to expand...
Click to collapse
For programs that say they didn't uninstall completely, the method I use to get them out is this:
1) run the cab again, the same one you used to install a/the app in the first place
2) when it gives you option or error dialogs, just click "ok" or "yes" to all of them, to allow it to go through what looks like another complete install process (yes, it's odd, but this is how to do it).
3) when it's done, soft-reset, and then you should find that there's no more trace of the app in your uninstall list.
Don't ask me how/why that works, but I've used it in many instances for just that reason, and it's worked every time I tried it.
As for that "AA AA" app, I've certainly never seen a cab that used that name (fyi, the name in the uninstall list doesn't necessarily match the name of the cab file...only if the person creating it set it up that way). So...I'd just say uninstall it, and see if any apps/links are missing then.

This thread is closest to my problem,so I'm asking here.
I cant uninstall ANY of my programs, I have tried the usual method from the remove programs section in Settings. I get same error as OP.
When that failed I then try to just delete the program folder from program files, using file explorer, but get an error saying 'Access is denied. Be certain the folder isn't in use and not write protected'
At first I thought I had a memory card problem, but its the same regardless of where the program is installed.
I also tried to re-install the programs from their cab files as described above, but get an 'unsuccessful' message.
I cant rename any files anywhere on my device either.
I know a little about write protection, but cant figure out what my problem is or how to fix it.
I hope I explained properly for someone to help.
Thanks.

It looks like that the installer process "wceload.exe" was not correctly quit and is still in the memory. Terminate the process wceload.exe with a task manager and try again.

Thanks ElectronX.
I did a search on my HD2 for the file you mentioned and couldn't find it. I have Duttys task manager installed and after a soft reset, the problem still remains. The task manager is empty of processes when I start the device.
Im sorry that Im a bit clueless to how to achieve what you suggest.

I have discovered that the problem extends beyond removing and installing programs. I cant do anything in file explorer other than open documents. If I want to move, delete, rename any file on the device I get the 'write protected' error message. I cant do it via active sync either..I connected to the computer and could browse my device, but if I tried deleting, moving or renaming, the message said it didn't have permission to do it.
Last resort is a hard reset, but hopefully someone will be able to help.

Use sktools to uninstall when windows fails. Best program ever...
Good luck

Thanks, but I cant install anything on my device...can sktools be run from my computer to fix the device?

Unfortunately not...
Good luck though..

sirphunkee said:
For programs that say they didn't uninstall completely, the method I use to get them out is this:
1) run the cab again, the same one you used to install a/the app in the first place
2) when it gives you option or error dialogs, just click "ok" or "yes" to all of them, to allow it to go through what looks like another complete install process (yes, it's odd, but this is how to do it).
3) when it's done, soft-reset, and then you should find that there's no more trace of the app in your uninstall list.
Don't ask me how/why that works, but I've used it in many instances for just that reason, and it's worked every time I tried it.
As for that "AA AA" app, I've certainly never seen a cab that used that name (fyi, the name in the uninstall list doesn't necessarily match the name of the cab file...only if the person creating it set it up that way). So...I'd just say uninstall it, and see if any apps/links are missing then.
Click to expand...
Click to collapse
Holy crap, this works.

Can't boot 'Droid' on TMOUS HD2 keep getting software not trusted cert

Hi, ( i hope this is the right forum for this or if not can someone please help me or direct me to the right now to resolve this) just wondering if anyone(s) out there that had this problem after they had any of the TMOUS HD2 'Driods' hacks installed on a SD card, had it running for a while, then turn off your phone, try to restart and get this error (this is occuring on both the CLRCAD and HARET programs) "The File 'XXXX" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem preresist, try reinstalling or restoring this file". i have already formatted and reinstalled the files on the SD card and been to most of the forums here about this issue for their resolution. (all with no luck) If there anyone out there with a simple resoultion (hopefully nothing too complex like a reg hack) can you please help me out with this issue. Thanks in advance

Is haret and the clr cab on the root and the Android files inside the Android folder?
Don't know much more than that. Try a diff winmo Rom I guess.
Sent from my Nexus One using XDA App

All of the files are still in the same directory and tried different ROMs, like i mentioned i had it running well for a while until i shut down the phone. Dont know if the "'Driod' hacks" or some unkown "update" from T-moble had something to do with it...

I have the same problem and I have also tried the same fixes you have I dont know what to do hopefully we can get a solution.

Perhaps try SDA unlocker? It removes the need for .CAB's or .exe's to be signed with a certificate. Either search the forums here or Google for "SDA Unlocker", download it, connect your phone via USB, and run the program to remove the lock.

Doesn't bsb tweats get rid of that. It'll let you run install unsigned cabs.
Sent from my T-Mobile G2 using XDA App

I don't remember, I have always just used SDA unlocker with every device i've ever owned with a stock ROM.

Can yall please shoot me a link to bsb tweats or sda unlocker so I can get this android running again asap thanks

alright this is getting real weird just to give you an update I found sdk certificates and it didnt install I tried restarting and installing it on the sd card and phone memory. I also found bsb tweak and it didnt install. I downloaded .net 3.5 but it said I have and updated version already so I completely dont know what to do all I want is the android to work again. Also just to let you know I have tried other build s of the android just to troubleshoot they all say the same thing now not signed with trusted certificate or one of its components is missing. It seems like tmobile blocked it. I truly need someones helps can you please give me an answer

09099090009090

I'm having the same problem, but only after I switch back to WinMo from Android.

This also is happening to me. I am unable to install any .cabs from the memory card. I installed HD2Tweak earlier and now it gives the same error. I can install from Windows Market.... What gives?

[Q] Cannot run any .exe file

i tried installing android but it didnt work the haret file wouldnt open and kept getting error message (http://forum.xda-developers.com/showthread.php?p=11352461#post11352461)
So i tried to flash my rom following this tut
http://forum.xda-developers.com/showthread.php?t=505377
but i was unable to run SPL v 1.56.OliNex, it kept saying error 240 device not responding
so i put the manual touch hd .exe onto my phone
but i get the same error message as when i run haret
the file 'name of .exe program' cannot be opened. either it is not trusted..if the problem persists try reinstalling or restoring the file..
what do i do?

......... any 1?

excatly like the error message says, there can be 2 possible reasons, why it wouldn't open:
1. it is not trusted
2. a component is missing
1. if it is not trusted, try hd tweak and set it to ignore certifications warnings
2. the "component" that is usually missing is .net framework 3.5. many apps come not fully loaded with their own code but are based on certain runtimes, which makes them compatible with more windows mobile versions and keep them clean, but to have those shared libraries and make the phone "understand" this program, you need to install the .net framework.

Chef_Tony said:
excatly like the error message says, there can be 2 possible reasons, why it wouldn't open:
1. it is not trusted
2. a component is missing
1. if it is not trusted, try hd tweak and set it to ignore certifications warnings
2. the "component" that is usually missing is .net framework 3.5. many apps come not fully loaded with their own code but are based on certain runtimes, which makes them compatible with more windows mobile versions and keep them clean, but to have those shared libraries and make the phone "understand" this program, you need to install the .net framework.
Click to expand...
Click to collapse
already gt framework 3.5, ill try hd tweak
edit
i tried to install hd tweak but when i opened the .cab file on phone i got past 'the program is from an unknown publisher..do you want to continue' i pressed yes but then i get the message 'installation of HD Tweak was unsuccessful'

too bad, i already suspected something like this to happen. to disable certification you'd have to install an uncertified program, vicious circle. what rom are you running? many roms don't have the certificate issue, because by default this is disabled by the rom chefs. another thing that you could try might be the autoinstall feature:
in my rom (cloudy 0.7) there is an autoinstall feature. it consists of a startmenu link AutoInstall, which then disables certain policies (including certification) to install all cabs in the AutoInstall folder on the sd card, kinda like an EXTROM known from older devices. most roms have a user customization (UC) feature built in, please post your rom chef and version or refer to the thread you got the rom from to check for this feature. i hope you already have ms myphone installed or you are able to run pimbackup on your device, because you might have a hardreset coming in your near future, and you should make sure to have backups of all your personal data and only that. using sprite backup, spb backup or resco backup is not recommended, that will not only restore your data, but also the problem, you are having right now.
in case you are running a shipped rom, which would explain, why that annoying certification is there in the first place, chances are slim, that UC will work for you, and if you also don't have ms myphone or are unable to run pimbackup, you should at least try and sync your data with exchange or outlook (however, this will not backup your call logs or sms)
i am still wondering what might have caused your troubles in the first place. did you install android as a cab? if it was the new froyo x build, which comes as portable os, it should be completely wiped, when you delete the folders from the sd card, in case of the earlier cab version, you might want to try uninstalling it. in case you made the error to install it to the internal storage, the hard reset is inevitable.

Chef_Tony said:
too bad, i already suspected something like this to happen. to disable certification you'd have to install an uncertified program, vicious circle. what rom are you running? many roms don't have the certificate issue, because by default this is disabled by the rom chefs. another thing that you could try might be the autoinstall feature:
in my rom (cloudy 0.7) there is an autoinstall feature. it consists of a startmenu link AutoInstall, which then disables certain policies (including certification) to install all cabs in the AutoInstall folder on the sd card, kinda like an EXTROM known from older devices. most roms have a user customization (UC) feature built in, please post your rom chef and version or refer to the thread you got the rom from to check for this feature. i hope you already have ms myphone installed or you are able to run pimbackup on your device, because you might have a hardreset coming in your near future, and you should make sure to have backups of all your personal data and only that. using sprite backup, spb backup or resco backup is not recommended, that will not only restore your data, but also the problem, you are having right now.
in case you are running a shipped rom, which would explain, why that annoying certification is there in the first place, chances are slim, that UC will work for you, and if you also don't have ms myphone or are unable to run pimbackup, you should at least try and sync your data with exchange or outlook (however, this will not backup your call logs or sms)
i am still wondering what might have caused your troubles in the first place. did you install android as a cab? if it was the new froyo x build, which comes as portable os, it should be completely wiped, when you delete the folders from the sd card, in case of the earlier cab version, you might want to try uninstalling it. in case you made the error to install it to the internal storage, the hard reset is inevitable.
Click to expand...
Click to collapse
im running original rom
here read this
http://forum.xda-developers.com/showthread.php?p=11352461#post11352461
i think this is what caused the problem, any idea how to solve?

as mentioned before, your device is pretty screwed up and you best option is to try and backup your personal information and then perform a hard reset and format your sd card (which might have troubles due to the android incident)

Chef_Tony said:
as mentioned before, your device is pretty screwed up and you best option is to try and backup your personal information and then perform a hard reset and format your sd card (which might have troubles due to the android incident)
Click to expand...
Click to collapse
Ive reformated mem card, ive backed up my documents with activesync. Yes im a noob how do u hard reset ?

switch off the device completely (not just sleep). then while pressing both the volume keys, switch it back on. you should see a white screen with blue font giving you instructions on how to reset the device to factory defaults.

Chef_Tony said:
switch off the device completely (not just sleep). then while pressing both the volume keys, switch it back on. you should see a white screen with blue font giving you instructions on how to reset the device to factory defaults.
Click to expand...
Click to collapse
thanks now gt android but im using the blackstone henge rom is this a good rom?