Database Users

[Q] LEO70 need to be changed to HTC HD7 T9292?

Someone told me that if you go to settings and scroll down to about. If it says LEO70 your market place isnt gunna work. But you can change something in the registry to fix it and change the name. If this is true, how do i do it? Can someone link me to a thread or a video.

TrevorMcCauley said:
Someone told me that if you go to settings and scroll down to about. If it says LEO70 your market place isnt gunna work. But you can change something in the registry to fix it and change the name. If this is true, how do i do it? Can someone link me to a thread or a video.
Click to expand...
Click to collapse
Thats all true. Everything you need to know is found in the first sticky post up top... theres tutorials on activating it in there.

All you need is this tutorial..
http://forum.xda-developers.com/showthread.php?t=912218
I recommend using TOMS Deployer to send the xaps to phone.
http://forum.xda-developers.com/showthread.php?t=908300&page=2

Hi. download this XBMOD,file deployer. Unzip and put on you desktop. Now start up your application Deployer (or Toms Deployer). Make sure phone is not in sleep mode. When the application deployer on your desktop has finished deploying, then go to the menu screen on your phone. You must have Touchxplorer still in there? If not put that in as well. OK here goes, Scroll to near the bottom until you can see XBMOD.Files.Deployer. Now tap that with your finger, it will open up, you can now see the CustClear.provxml, OK. Right now using the back arrow key on your mobile,push once and now you are in the menu again.OK now push the TouchXplorer, you will see yellow files there. You need to open my documents (Tap it twice), then you need to open the My Ringtones folder(Tap it twice). Can you see the CustClear.provxml file (Yes) OK now touch that until highlighted. then at the bottom of that screen, use your finger to push it up, or touch that 3 little full stops... scroll until you see the copy option. Now touch the copy. OK Just use the back arrow key again (Twice) until you come back to My Device. Scroll it up a bit until you see the yellow Windows folder. Now tapit twice untilthat opens.It will take a bit of time, but once you see it open with yellow files, then go to the bottom of you screen and tap the 3 little ... again. scroll until you see paste.OK Hit the paste, Thats it. Back out of the settings using the back arrow button. go to the about screen, and it should now show HTC HD7 T9292. If so then you have Cracked it.(IF not, do it again slower this time?) now go to hotmail and try logging in. It should fail, and then you touch the error message, it now shows the activation screen. now put the codes in, re log into your account..Job Done.

russpattaya said:
Hi. download this XBMOD,file deployer. Unzip and put on you desktop. Now start up your application Deployer (or Toms Deployer). Make sure phone is not in sleep mode. When the application deployer on your desktop has finished deploying, then go to the menu screen on your phone. You must have Touchxplorer still in there? If not put that in as well. OK here goes, Scroll to near the bottom until you can see XBMOD.Files.Deployer. Now tap that with your finger, it will open up, you can now see the CustClear.provxml, OK. Right now using the back arrow key on your mobile,push once and now you are in the menu again.OK now push the TouchXplorer, you will see yellow files there. You need to open my documents (Tap it twice), then you need to open the My Ringtones folder(Tap it twice). Can you see the CustClear.provxml file (Yes) OK now touch that until highlighted. then at the bottom of that screen, use your finger to push it up, or touch that 3 little full stops... scroll until you see the copy option. Now touch the copy. OK Just use the back arrow key again (Twice) until you come back to My Device. Scroll it up a bit until you see the yellow Windows folder. Now tapit twice untilthat opens.It will take a bit of time, but once you see it open with yellow files, then go to the bottom of you screen and tap the 3 little ... again. scroll until you see paste.OK Hit the paste, Thats it. Back out of the settings using the back arrow button. go to the about screen, and it should now show HTC HD7 T9292. If so then you have Cracked it.(IF not, do it again slower this time?) now go to hotmail and try logging in. It should fail, and then you touch the error message, it now shows the activation screen. now put the codes in, re log into your account..Job Done.
Click to expand...
Click to collapse
Great little tutorial, but i still cannot change the model to HD7 I have done these steps over a dozen times and cannot change the model tried resetting phone re-installing zune - locking/ unlocking again- any thoughts? any other way to do it?

russpattaya said:
Hi. download this XBMOD,file deployer. Unzip and put on you desktop. Now start up your application Deployer (or Toms Deployer). Make sure phone is not in sleep mode. When the application deployer on your desktop has finished deploying, then go to the menu screen on your phone. You must have Touchxplorer still in there? If not put that in as well. OK here goes, Scroll to near the bottom until you can see XBMOD.Files.Deployer. Now tap that with your finger, it will open up, you can now see the CustClear.provxml, OK. Right now using the back arrow key on your mobile,push once and now you are in the menu again.OK now push the TouchXplorer, you will see yellow files there. You need to open my documents (Tap it twice), then you need to open the My Ringtones folder(Tap it twice). Can you see the CustClear.provxml file (Yes) OK now touch that until highlighted. then at the bottom of that screen, use your finger to push it up, or touch that 3 little full stops... scroll until you see the copy option. Now touch the copy. OK Just use the back arrow key again (Twice) until you come back to My Device. Scroll it up a bit until you see the yellow Windows folder. Now tapit twice untilthat opens.It will take a bit of time, but once you see it open with yellow files, then go to the bottom of you screen and tap the 3 little ... again. scroll until you see paste.OK Hit the paste, Thats it. Back out of the settings using the back arrow button. go to the about screen, and it should now show HTC HD7 T9292. If so then you have Cracked it.(IF not, do it again slower this time?) now go to hotmail and try logging in. It should fail, and then you touch the error message, it now shows the activation screen. now put the codes in, re log into your account..Job Done.
Click to expand...
Click to collapse
I still did all of that and it didnt work.

Zedbed, Trevor,
I might be wrong about it showing before registering? Try registering, and see if it has changed. No problem if it shows you LEO7, as you have not used up your activation key.
Give that a try and let me know, and i will change my posting.
Russ

russpattaya said:
Zedbed,
I might be wrong about it showing before registering? Try registering, and see if it has changed. No problem if it shows you LEO7, as you have not used up your activation key.
Give that a try and let me know, and i will change my posting.
Russ
Click to expand...
Click to collapse
Ive already registered and typed in my activation key and still said LEO70.

TrevorMcCauley said:
Ive already registered and typed in my activation key and still said LEO70.
Click to expand...
Click to collapse
Did you do the guide I linked you to?
Hard reset your phone and do everything in the guide form begining to end, Do not skip and do not do it on your current setup.
Start a fresh.
To hard reset hold volume up/down when you see the 1234 on magldr and keep holding them till the DFT screen has changed to white screen with instructions.

TrevorMcCauley said:
I still did all of that and it didnt work.
Click to expand...
Click to collapse
You may be using the wrong custclear.provxml file! The same thing happened to me and I couldn't change LEO70 to HD7 until I went to this thread http://forum.xda-developers.com/showthread.php?t=911579 download the toolkit that's in the first link you see, and used the XBMODDeployer.xap that's in the toolkit.
Copy to ringtones, copy to Windows folder in WP7 & use Connection Setup to provision as usual. Only by doing these steps will you be able to see HD7 when you go to the about screen. If that doesn't work, hard reset and try again.

staypaidtre said:
You may be using the wrong custclear.provxml file! The same thing happened to me and I couldn't change LEO70 to HD7 until I went to this thread http://forum.xda-developers.com/showthread.php?t=911579 download the toolkit that's in the first link you see, and used the XBMODDeployer.xap that's in the toolkit.
Copy to ringtones, copy to Windows folder in WP7 & use Connection Setup to provision as usual. Only by doing these steps will you be able to see HD7 when you go to the about screen. If that doesn't work, hard reset and try again.
Click to expand...
Click to collapse
That's the tutorial I used before. But I just did a hard reset and did the process over, and now it works Thank you all very much!

russpattaya said:
Zedbed, Trevor,
I might be wrong about it showing before registering? Try registering, and see if it has changed. No problem if it shows you LEO7, as you have not used up your activation key.
Give that a try and let me know, and i will change my posting.
Russ
Click to expand...
Click to collapse
This worked for me.. Thanks for that Great post.
Neil.

russpattaya said:
Hi. download this XBMOD,file deployer. Unzip and put on you desktop. Now start up your application Deployer (or Toms Deployer). Make sure phone is not in sleep mode. When the application deployer on your desktop has finished deploying, then go to the menu screen on your phone. You must have Touchxplorer still in there? If not put that in as well. OK here goes, Scroll to near the bottom until you can see XBMOD.Files.Deployer. Now tap that with your finger, it will open up, you can now see the CustClear.provxml, OK. Right now using the back arrow key on your mobile,push once and now you are in the menu again.OK now push the TouchXplorer, you will see yellow files there. You need to open my documents (Tap it twice), then you need to open the My Ringtones folder(Tap it twice). Can you see the CustClear.provxml file (Yes) OK now touch that until highlighted. then at the bottom of that screen, use your finger to push it up, or touch that 3 little full stops... scroll until you see the copy option. Now touch the copy. OK Just use the back arrow key again (Twice) until you come back to My Device. Scroll it up a bit until you see the yellow Windows folder. Now tapit twice untilthat opens.It will take a bit of time, but once you see it open with yellow files, then go to the bottom of you screen and tap the 3 little ... again. scroll until you see paste.OK Hit the paste, Thats it. Back out of the settings using the back arrow button. go to the about screen, and it should now show HTC HD7 T9292. If so then you have Cracked it.(IF not, do it again slower this time?) now go to hotmail and try logging in. It should fail, and then you touch the error message, it now shows the activation screen. now put the codes in, re log into your account..Job Done.
Click to expand...
Click to collapse
Thanks for the guide too

Also run connection setup once you have finished it all. This executes the prox file. Go to HTC apps to download the connection setup app
Sent from my HTC HD2 using XDA App

Hi, I activated my phone using an official code. However I am still not able to unlock the device. This might be a stupid question, but Is it nesecary to unlock the phone in order to change the name using xbmod deployer and download apps from the market.
Because without unlocking I was at least able to use live mail.

[Q]Screen Problem

Hey,
I have an HTC HD and love it. But I have a problem with screen.
When I push at the middle of the screen, it perceives the command wrong and acts like i push at the bottom of the screen. And when I push start button, it acts like I push the clock.
Aligning the screen from Settings menu works but only for 5 or 10 minutes, then it break itself down again.
What can I do ?
Thank you !

Knuckled said:
Hey,
I have an HTC HD and love it. But I have a problem with screen.
When I push at the middle of the screen, it perceives the command wrong and acts like i push at the bottom of the screen. And when I push start button, it acts like I push the clock.
Aligning the screen from Settings menu works but only for 5 or 10 minutes, then it break itself down again.
What can I do ?
Thank you !
Click to expand...
Click to collapse
try using this CalibrationData maybe it could help

I do not know how to use it

Knuckled said:
I do not know how to use it
Click to expand...
Click to collapse
you simply extract to your device and import the registry file that exists in the package
if the post is useful to you, press the thanks button

HTC HD Screen Problem
Yo Mate. Thanks alot it works. I have been trying to solve this problem few months back but fail. SAtumbled upon this tread and Ta Da. You've made my day. Hope it'll last.
THANK YOU THANK YOU THANK YOU

Help
ok maybe I sound stupid, but how the F***K to use it.
I have the same problem as mentioned above.
I downloaded it on to my pc then I put the zip file on my Touch HD straight into my root and even on my sd-card.
Whats next to do, when I clic on it it goes to zip mobile, at least in left corner of the screen it says so. I see a + mark and when I clic on it it colapse and then an other + shows up (CalibrationData folder) and then beneath CalibrationData.reg file.
So any smart guy or girl can help me out.
Grtz xxxware

There must be something in the air(waves)!
See: http://forum.xda-developers.com/showthread.php?t=1075957
I've had nothing like this happen before, and not heard of it happening before, then all of a sudden three instances (like a bus).
I'll try this calibration data but my phone would let me calibrate now it won't, it's just gotten worse!

[Q] NST & Touchnooter install kinda sorta

Renate NST suggested I post this in this forum
To all the developers - Thanks in advance for all the GREAT work!
The Saga
Installed touchnooter-2-1-31 and NST hung on install.
Waited an hour and rebooted
NST booted to "walking dots"
Used n2T-Recovery_0.2
Went thru "start-up" dialog (register, etc) and got the machine running again.
Noticed that NST SW was at 1.0
Updated NST to 1.1.2
Installed touchnooter-2-1-31.
Boot screen was "Read Forever"
Android fired up.
Missed the select ADW - should have done that
Button Savior wanted Superuser - should have done that
Buttons on side grayed out
Used n2T-Recovery_0.2 again
did not get me to the "register" start-up dialog
Updated NST to 1.1
Installed touchnooter-2-1-31 again
Boot screen is still "Read Forever"
Same action on buttons - grayed out
So .... my take on this is given the multiple installs I have scrambled something but good.
Is there a way to get to square zero?
Will the erase and de-register do that?
Is there a way to correct the ADW / Button Savior issues?
Is there a way to get to Android despite to side buttons?
Thanks in advance for any help.
The NST works as a reader - so I'm not dead - just wounded

I think you're jumping the gun on doing recovery. When you reboot, aren't you at the ADW Launcher screen? It's been a while since I rooted my NST using TouchNooter (TN), but I believe you can launch the Superuser app after a basic TN root and change the settings for any apps you goofed on (e.g. Button Savior). Just launch Superuser, click the icon of the desired app at left, then click the little android icon at right to toggle the Status between Allowed and Denied.
Erase & Deregister Device in Settings->Device info should suffice to get you back to an unrooted state for a repeat attempt, assuming you can get to it. I've used it many times. If not, power off, then press & hold the lower left & right buttons as you power back on for a few seconds to get a factory reset option. I believe this would have helped you after that first TN hang. You could just retry after a factory reset and reboot. (Haven't had to do this myself, so not 100% sure.)
Download and install Default App Manager from the Google Market to change your default launcher so you can set it to ADW, or whatever you prefer. This works for changing defaults for any app, so is a good thing to keep around.
For the side buttons, do you mean the hard side buttons? You can change those settings with the Side buttons option in NookTouch Tools.
Also in NTT, you can change the 'n' button behavior to take you straight to your home app (ADW) if you don't like the QuickLaunch menu (I do). Be sure to check the Show extra action buttons in recent option, and you'll get Back, Home, Menu, Search and Orientation buttons (just like Button Savior) when you long-press the 'n' button, as well as your most recent apps.
As I mentioned in a separate post, I prefer to use NookTouch Tools to override the B&N QuickLaunch options to eliminate the need for Button Savior or similar apps altogether. Between a QuickLaunch option or two, and the extra options in the recent apps dialog, I've got those options covered. I did remap two of the hardware side buttons to Back and Menu just because they're handy.
I've had very good luck using TouchNooter, but you do have to read the step-by-step directions carefully. There are ways around most problems if you can get to ADW.
Good luck with it!

bobstro said:
I think you're jumping the gun on doing recovery. When you reboot, aren't you at the ADW Launcher screen? It's been a while since I rooted my NST using TouchNooter (TN), but I believe you can launch the Superuser app after a basic TN root and change the settings for any apps you goofed on (e.g. Button Savior). Just launch Superuser, click the icon of the desired app at left, then click the little android icon at right to toggle the Status between Allowed and Denied.
Click to expand...
Click to collapse
It boots to the reader ... buttons are there on the right side, but grayed out and non-functional (no superuser on button.savior)
So .. is there something I can boot from off the SD card that would allow me to
1.) Set ADW as the default, and / or
2.) Give Button.Savior the Superuser permissions?
Erase and Dereg is available as I only have access to the reader and not ADW.
Thanks for the help folks!

Were I the original poster, I would recover from my nonrooted backup image and re-root, or if I could not find it or found it but found that it was not 1.8 gig in size, would force factory reset (first, erase and deregister, then 8 failed, IIRC, to get both /system and /data wiped.)
Once I'd done a full reset, if I'd needed to do it that way, I'd boot from noogie and make my backup.
Then i'd reroot, probably using one of the Clockwork-based tools rather than the Touchnooter system, as it seems that
folks are sometimes seeing TN not quite finish (it happened to me on occasion) and the Clockwork tools seem to be
very robust, enough so that the Glownooter uses clockwork.
I actually like to really baseline something like this and be sure there's no odd cruft hanging out in /system or /data that may confuse me later.

WorkenOnIt said:
It boots to the reader ... buttons are there on the right side, but grayed out and non-functional (no superuser on button.savior)
Click to expand...
Click to collapse
You're definitely seeing some odd behavior. I always wound up at ADW on any reboot.
Erase and Dereg is available as I only have access to the reader and not ADW.
Click to expand...
Click to collapse
You should still be able to get to it via Settings->Device Info. In my experience, erase and dereg was sufficient to make another rooting attempt, but you might want to get back to ground zero. The restore option you've been using, a restore from backup as roust suggests, or doing the 8 failed boot attempts are all options. Be sure to update to whatever version of firmware you want before attempting.
Roust: After you do a CWM noot, what version does Device info show? Mine always shows 1.1.0 after TN, even though I updated to 1.1.2 previously. This has to do with some of the framework tweaking, IIRC. My TN may be old by now.

To all,
Thanks for all your help.
I did an Erase and Deregister.
That appeared to work
Checked firmware - was 1.1.0
Tried to reload TouchNooter (2-1-31)
Screen hung again - like the first time.
Waited 30 minutes and pulled the SD and rebooted.
Boot screen still says "Read Forever"
Went thru the startup dialog and selected the ADW launcher and allowed superuser on the button.savior.
I can now "complete the action" with the ADW launcher and the side keys function.
Everything appears to be working ...
Gmail gets to the account ..
Now why does it still say "Read Forever"?
Anyway - again - thanks for the help
This can be closed ... but I dont think it is "solved"

WorkenOnIt said:
[...] Screen hung again - like the first time.
Click to expand...
Click to collapse
When TN completes, you just get the black screen. This is not spelled out in step 8 of Gabrial's procedure, but it is mentioned in the on-screen instructions. Is that what you were seeing?
Boot screen still says "Read Forever"
[...] Now why does it still say "Read Forever"?
Click to expand...
Click to collapse
When I first power mine on, I get the "Read Forever" screen which is shortly followed by the rolling dots as the device boots. After a few moments, I get the slider unlock screen. Is that what you're seeing?
If so, I think that's normal.
Once you unlock, you're at the ADW screen now, right? Or at least you can get back to it in some way?

bobstro said:
When TN completes, you just get the black screen. This is not spelled out in step 8 of Gabrial's procedure, but it is mentioned in the on-screen instructions. Is that what you were seeing?
When I first power mine on, I get the "Read Forever" screen which is shortly followed by the rolling dots as the device boots. After a few moments, I get the slider unlock screen. Is that what you're seeing?
If so, I think that's normal.
Click to expand...
Click to collapse
Screen never blanked .. it did in tries #2 and #3 .. but not #1 and this last one
I thought it would say "Root Forever" ... but hey, as long as it works!
bobstro said:
Once you unlock, you're at the ADW screen now, right? Or at least you can get back to it in some way?
Click to expand...
Click to collapse
It boots to the "Home" reader .. but buttons on side (House) get me to the ADW / Reader selection

WorkenOnIt said:
[...] It boots to the "Home" reader .. but buttons on side (House) get me to the ADW / Reader selection
Click to expand...
Click to collapse
Good to hear it's working. If you don't like the side buttons that Button Savior uses, you can use Nook Touch Tools to provide a couple of alternatives.
You should also be able to change your default Home app using the technique I described above.
IIRC, the "rooted forever" screen only shows during the rooting process. I think Noogie uses that.

This serious improved my RAZR performance

My RAZR HD was getting slower and slower in response, which I found very annoying. I figured it was cause of me using alternative launchers and too many apps installed and I'd have to live with it. Or I thought it was only having 1 GB of RAM.
But I found the following tip and wiped the cache partition:
http://support.verizonwireless.com/support/devices/knowledge_base.html/66428
Wow. The phone is responding instantaneously. Wow. SERIOUS improvement in response.
I followed these instructions EXACTLY as they say, I have reproduced here:
1 Power the device off.
Note Press the Power button then select Power off.
Note If the device doesn't respond to input, press and hold the Volume Up / Down then press and hold Power button. When the device screen goes blank, release the Power button while continuing to hold Volume Up / Down then proceed with step 3.
2 Press and hold the Volume Up / Down then press the Power button.
3 When presented with the Boot Mode Selection Menu, release all buttons.
4 Press Volume Down to select Recovery then press Volume Up.
5 From the Droid triage screen:
Press and hold Volume down.
Press and release Volume up.
Release Volume down.
6 Select wipe cache partition then press the Power button.
Note Use Volume keys to navigate options.
7 Select reboot system now then press the Power button.
Note Use Volume keys to navigate options.

Thank-you! I had same exact problem. I just did it. Much better now...
Sent from my DROID RAZR HD using XDA Premium 4 mobile app

ckrohrer72 said:
Thank-you! I had same exact problem. I just did it. Much better now...
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I know, eh? Who would have thought?
It was getting embarasssing when you have friendly fights between an iPhone and you to find information faster and.... it would take 3 seconds for Google Search to even load...
Funny thing is... that sequence of pressing buttons to get to the Recovery menu selection is something I just cannot memorize. :laugh:

junkaholic said:
I know, eh? Who would have thought?
It was getting embarasssing when you have friendly fights between an iPhone and you to find information faster and.... it would take 3 seconds for Google Search to even load... :
Click to expand...
Click to collapse
Install this:
https://play.google.com/store/apps/details?id=org.lsartory.cachecleaner.ng
My Cache gets wiped at 5AM every morning. Works geat.

This defeats the point of a cache.
Sent from my DROID RAZR HD

once a day may be a bit extreme, although it has been a known fact for some time, wiping the cache from time to time reduces lag and helps other minor issues.

Worked for me, thanks!

My own advice
Wow, just how exactly is it that this is NOT a Sticky? This is about the most useful piece of advice I´ve ever found about my Razr, it´s like a new phone all over again! And if you have a custom recovery, it´s even easier. I´ve got the Touch CWM 6.0.4.4 for XT925 and going into it if you have quickboot installed on your rooted phone is a one buton touch on your screen process, I´m very, very happy now, thanks!
Ok, now for my own piece of advice. One other measure which helped me tremendously as well was to clean everything from the original, base launcher. I made the mistake of leaving some extra pages and widgets on the original launcher after I had installed Holo HD launcher, and it wasn´t until now that I realized that those things left on the original launcher still loaded into the memory on the background, even if I wasn't using it or couldn't even access it for that matter! So, if you use Nova, Apex, Holo HD or any other Launcher, make sure you first delete ALL extra pages and leave just the one, Remove the clocks, folders, icons and specially any widgets that might have been on the desktop page, and pay special attention to remove the Circles Widget. You will see the difference! Thanks :good:

Back button not working

After the upgrade to version 5.x, the "back" button (touch) ceased to work, the press works correctly. I'm sure this is a software problem. Sometimes it starts working, after reflashing for a short period. I'm sure it's a bug with the "finger scanner" settings. Found that when the button starts to work - thumbnails are displayed and it is suggested to scan them. When the button does not work (does not return back), I'm watching artifacts and errors (see screenshots).
A video where my problem is visible: watch?v=y5MfwJpu_7w (youtube)
When the button does not work (backward function), in the "identification by release" section we see this (see screenshots) and note that:
1) When you try to add a finger to the screen, there is only a suggestion to enter the name for the "finger", it does not save, it says "save error". (the window when you need to put a finger does not appear)
2) Five empty fields appear, they can be selected and selected, but can not be deleted.
When the button starts working, in this section we see the normal name of your data (finger names) and when you try to add, the menu opens correctly and you can safely perform the necessary operations.
What does NOT help solve this problem:
1) Reset all settings
2) Re-flashing (After it, sometimes it starts to work for a short time)
What can I try? I know that not a few people have encountered this problem, wrote them in private messages, but it was all over the past year and their accounts are not active.
UPD1:
Deleting this folder /system/app/mcRegistry:
1) After the reboot, the files do not appear in it, just like the folder itself does not appear anymore.
2) After reinstalling or cleaning the system, binaries reappear there.
3) Rollback to version 5.x with 6.x nothing has changed the same files and the same "bugs".
UPD2: add logs https www dropbox com/s/hyqki38h71rhfdy/17-10-02--23-42-38.zip?dl=0
The problem is not solved, what else can I try to solve?
p.s. Sorry for my English. using translator

hi I have this problem too..
do you solve it??

Same problem
Having the same problem. Button didn't work for a half a year. And after updating to flyme 7, once again has begun working. Worked for less than a day. Now dead again.
I heard that it's not expensive to change the button, though it doesn't seem like the problem in the button itself.
upd
Used alcohol.
Just cleaned the button with it. And it works.

al_prix said:
Having the same problem. Button didn't work for a half a year. And after updating to flyme 7, once again has begun working. Worked for less than a day. Now dead again.
I heard that it's not expensive to change the button, though it doesn't seem like the problem in the button itself.
upd
Used alcohol.
Just cleaned the button with it. And it works.
Click to expand...
Click to collapse
put energy plan to max and try if it work.