Database Users

WM6.1 Manila2d Blueangel ROM

Requesting all those great Rom cookers out here to create a Rom with Manila2d in it. No, not on ExtROM but inside the ROM itself. That would be faster better and faster I think.

ebautista said:
Requesting all those great Rom cookers out here to create a Rom with Manila2d in it. No, not on ExtROM but inside the ROM itself. That would be faster better and faster I think.
Click to expand...
Click to collapse
Integrated Manila 2D into cooked ROM is surely a better solution, however most people prefer a clean ROM. Beside due to limitation of the flash size (32MB i think), it would requires to remove lots of even basic application come with the ROM.

not possible due to limited 32 mb storage. even the mms is not included in any ba wm6 rom so can u think for Manila.
ebautista said:
Requesting all those great Rom cookers out here to create a Rom with Manila2d in it. No, not on ExtROM but inside the ROM itself. That would be faster better and faster I think.
Click to expand...
Click to collapse

krishan2207 said:
not possible due to limited 32 mb storage. even the mms is not included in any ba wm6 rom so can u think for Manila.
Click to expand...
Click to collapse
exactly...

M2D cooked in
I'v tryed to fit "M2D" in a cooked ROM you can get the main files in there' But not enough of the image files, I also did some test builds "without" the calc, media player,dialer,and commManager skins, And Flashed them from "ExtROM" as Themes It Seamed to Work fine But you would still Be adding A large number of files Via ExtROM so not much to be gained (can't say It was any different speed wise)
My origonal Idear was Adding skins to your device like this may, make rom's more fun and the user could change Skins From *.cab files (Themes)
So If you fancy a try and some people are intrested in making some Skins then I'll cook My New V3 and working version of M2D into a "ROM" With all Skins Removed and Post it with One Full Set of Skins in CAB files and folders of files for you to edit and i'll even pack some of your Themes into CABs and we'll see what Comes of it
I would like at least 5 people to be intrested in assisting with skins as I don't Have enough time to do it all
So If you would like to have a GO then you need to say SO or i'll not bother that's my offer regards
swampy395

I think it is a great idea, manila2 in a cab with no skin, and the default skin in a separate .cab so we can replace and tinker with it at leisure
I am in to give a hand!

Ok people think about it just for a minute, Manila 2D has a size of 12 mb, with a rom of 32 mb even if it is compressed we have to cut a lot of things from main rom to make this possible, and the the stupid questions will come, why this or that not work. Thats why i am working on a proper kitchen so the people can choose whatever packages they want in rom and make it themself. So if the rom does not boot or has audio video formats problems or software compatiblity problems this will be the builder configuration fault not mine or any other rom cooker.
Also you can use my last kitchen but you need to add options.xml in OEM and SYS folder to choose the packages
swampy395 said:
My original Idea was Adding skins to your device like this may, make rom's more fun and the user could change Skins From *.cab files (Themes)
Click to expand...
Click to collapse
Well this is good as idea(i mean the complete customization from cabs and saving space from the skins in the rom area) but you have to make manila not to load on startup because without skin it will just crash and you will have to reset, and there will be infinite loop ...

xplode said:
Also you can use my last kitchen but you need to add options.xml in OEM and SYS folder to choose the packages
Click to expand...
Click to collapse
I would love to give this a try, but I don't know enough about the interdependencies of the root packages to build a reliable options.XML file. Could you post a list of the diff packages that are part of the ROM with a notation of which are required, which are nice to have and which can be left out? If you do, then I will try to build an Options.xml file and post it for testing with your kitchen.

I have modded manila2d so the default skin is no more and instead one more of my liking. The resulting cab is 100KB smaller...
It boots fine
Will be posting today

gloomyboy said:
I have modded manila2d so the default skin is no more and instead one more of my liking. The resulting cab is 100KB smaller...
It boots fine
Will be posting today
Click to expand...
Click to collapse
you cooked it in rom or what ?

No, I haven´t gone yet for cooking, I just tinkered with the .cab files in the ExtROM folder.
See my separate thread for details

Themes
Hi guys
NO fighting
As my previous post I did some tests and I could get enought of the M2D files in the ROM for IT to boot! and from "rom boot" to "ExtROM Finnish" it doe's not try to load M2D, first load of M2D is after the reset that Terminates ExtROM loading BUT I had to remove 'Calculator,Dialer,WM_Player skins,ring tones and some shortcut, The rom I tested for about 4 days and was as stable as any rom!, And here's a BIG "BUT" Keeping track of all the bits that are needed is a some TASK! in short it will work but it's hard work

swampy395 said:
Hi guys
NO fighting
Click to expand...
Click to collapse
Fighting???? We are all friends in here.
swampy395 said:
As my previous post I did some tests and I could get enought of the M2D files in the ROM for IT to boot! and from "rom boot" to "ExtROM Finnish" it doe's not try to load M2D, first load of M2D is after the reset that Terminates ExtROM loading BUT I had to remove 'Calculator,Dialer,WM_Player skins,ring tones and some shortcut, The rom I tested for about 4 days and was as stable as any rom!, And here's a BIG "BUT" Keeping track of all the bits that are needed is a some TASK! in short it will work but it's hard work
Click to expand...
Click to collapse
I can live without all of the things that you removed as I use alternates for all of them which are loaded into storage anyway and just waste the ROM space.
BUT, as you say, I don't have enough knowledge to know which parts can and can't be dumped from the core ROM. That's why I asked Xplode to make a list. If you can make some kind of list, I'm willing to try and build a suitable options file to be used with his kitchen.
Another thing. I may be slow, but I can't figure out what parts of M2D are in the ROM and what parts are being installed via CAB. I opened the M2D cab and I see that the executables are still in there. If they are in the CAB, what are you loading in the ROM?

motisu said:
Fighting???? We are all friends in here.
I can live without all of the things that you removed as I use alternates for all of them which are loaded into storage anyway and just waste the ROM space.
BUT, as you say, I don't have enough knowledge to know which parts can and can't be dumped from the core ROM. That's why I asked Xplode to make a list. If you can make some kind of list, I'm willing to try and build a suitable options file to be used with his kitchen.
Another thing. I may be slow, but I can't figure out what parts of M2D are in the ROM and what parts are being installed via CAB. I opened the M2D cab and I see that the executables are still in there. If they are in the CAB, what are you loading in the ROM?
Click to expand...
Click to collapse
Hello again
I didn't publish that ROM, It was a test 'only' My M2D roms have most of the today plugins removed from rom as you don't need them, you can only have M2D plugin running!! If you remove WMP you loose so many formats 3gp etc. There are many things you can install from cab But cannot leave out thay have to go back in, The end finnished rom plus cabs is just the same size so y bother
P.S. If your useing a swampy rom then you can flash new skins from a cab

Swampy, if you cook my modded M2D you will have some 100Kb more to play with in the first place...
Now, if you zip up your ´Removed´ folder after cooking a barebones rom with M2D in rom we can help you build .cabs that would go in ExtROM an hence we would have a much more modular design
Taskmanager is a good candidate to go on a .cab, some people like one some like another. It pains me to see two installed

Swampy, but there is an alternative to Windows media player,
Mplayer, a 4megs cab. Supports many formats, it is lean and a standard in Linux (available for Windows Mobile)
Download MPlayer for Windows Mobile
You could remove everything to do with windows media player and put them on a .cab, then give users a choice; windows media.cab or mplayer.cab

swampy395 said:
Hello again
I didn't publish that ROM, It was a test 'only' My M2D roms have most of the today plugins removed from rom as you don't need them, you can only have M2D plugin running!! If you remove WMP you loose so many formats 3gp etc. There are many things you can install from cab But cannot leave out thay have to go back in, The end finnished rom plus cabs is just the same size so y bother
P.S. If your useing a swampy rom then you can flash new skins from a cab
Click to expand...
Click to collapse
Sorry, but I'm still not following you. In the first post of your 20275 thread and in your sig, you have a M2D version. If this isn't the M2d in ROM version, then what is it? If all that you did was leave out the today plugins, what did you use the extra ROM space for? Also, I never use WMP as almost any other player is far better IMHO (Coreplayer, S2P, Tcpmp,Mortplayer, Etc.) If I don't use it, will I still need its support for diff file types?

Swampy´s M2D roms don´t contain M2D in the rom itself but will install it in rom from the storage card whenever you do a hard reset.
So it is basically loading the extra stuff from a custom ExtROM folder in the storage card
Of course I agree it would be better to have M2D in rom proper and say windows media player in a .cab in the ExtROM folder so it can be easily removed if you don´t want it (I certainly don´t want it)

gloomyboy said:
Now, if you zip up your ´Removed´ folder after cooking a barebones rom with M2D in rom we can help you build .cabs that would go in ExtROM an hence we would have a much more modular design
Taskmanager is a good candidate to go on a .cab, some people like one some like another. It pains me to see two installed
Click to expand...
Click to collapse
I agree with gloomyboy. Since there are SO MANY differnt app/utilities that more or less do the same thing, it stands to reason that everybody will have their own preferences. If someone could build a kitchen that really allows you to pick and choose what goes into the ROM, everybody could custom tailor their ROM for what they really use. Unfortunately, AFAIK, all of the kitchens available today only allow periferal change and not major systems changes. I don't know why, maybe it is just my lack of understanding of the core requirements of a ROM and it can't be done any other way. But I can allways wish....

gloomyboy said:
Swampy´s M2D roms don´t contain M2D in the rom itself but will install it in rom from the storage card whenever you do a hard reset.
So it is basically loading the extra stuff from a custom ExtROM folder in the storage card
Of course I agree it would be better to have M2D in rom proper and say windows media player in a .cab in the ExtROM folder so it can be easily removed if you don´t want it (I certainly don´t want it)
Click to expand...
Click to collapse
OK, now I get it. I do that myself with my own home grown EXTROM based more or less on Xplode's new release of M2D with all sorts of shortcuts and config files being copied from my SD card into memory. I am constantly changing my cfg.txt file to include newer versions and getting rid of apps and utilities that I find that I don't use. I think that the ROM should contain all the permanent stuff that will fit and I can't function without.

[APP]Diamond_PhoneCanvas_VGA(Slide to Answer/Ignore) [2008/12/28]

Just dump the VGA bitmap and dll files from a chinese Diamond ROM[http://www.5dpda.com/bbs/thread-22603-1-1.html]
Cab modifed from phonecanvas qvga version[http://mbarvian.freehostia.com/2008...e-applications-cab-and-oem-package-included/]
Usage:
1. Try the [Diamond_PhoneCanvas Patch_Eng.cab] first.
2. If [Diamond_PhoneCanvas Patch_Eng.cab] doesn't work, try extract [Diamond_PhoneCanvas Patch.zip] to /Windows of your devices.
3. If it still doesn't work, try the new [Diamond_PhoneCanvas_full_Eng_without_battery_icon.cab]
Notice:
1. Doesn't work on CDMA ROM.
2. You should enable PhoneSkin.
3. Test on dutty's 3.6b Lite ROM.
ChangeLog:
-Remove 0804 mui files
-Change fonts size of buttons during calls
Any feedback is appreciated.
Anyone who want to translate the text, plz use Reshack to modify the mui files such as phcanrc.dll.0409.mui.
If you like to remove "Slide to answer/Ignore" on incoming calls, plz use this files make by BlockbusterF. [http://forum.xda-developers.com/showpost.php?p=3089528&postcount=73 ].
About how to edit/translate "Slide to Answer" Text, plz refer to BlockbusterF post at http://forum.xda-developers.com/showpost.php?p=3091058&postcount=108. It's a German Version.
Thanks to dane for this black slider http://forum.xda-developers.com/showpost.php?p=3091980&postcount=131, and also daddyload2 [http://forum.xda-developers.com/showpost.php?p=3089616&postcount=75 ]
Thanks to fiendz for another full cab http://www.megaupload.com/?d=JZRBG9JE. anyone who can't use my cab, plz try fiendz's cab.
Thanks to herg62123 for all in one cab with Slide to Answer + Curtain http://forum.xda-developers.com/showpost.php?p=3103295&postcount=244

Thanks bro.
EDIT: Where's the Diamond_PhoneCanvas_full.cab??... I saw it just before I had wrote my post... I promise XD.

This is great, but the links are dead??? I really like the look of this...

I am sorry, the previous cab has some chinese text in it.
I am uploading the new one

I get an error: The cab cannot be installed. Tried both cabs

dobb said:
I get an error: The cab cannot be installed. Tried both cabs
Click to expand...
Click to collapse
...same here!

cyron_at said:
...same here!
Click to expand...
Click to collapse
Same ...

same here!!!

maybe the problem is that we are using stock ROM's. I've found on some other forums other users experiencing this kind of problem, and all of them are using stock ROM's :S

I am using Dutty's 3.6b Lite.
Haven't test on stock roms.

dont' work here either

fico2 said:
maybe the problem is that we are using stock ROM's. I've found on some other forums other users experiencing this kind of problem, and all of them are using stock ROM's :S
Click to expand...
Click to collapse
I'm with XBMOD, not with Stock Rom

Mhh I´m using bElite 0.99 and it doesn´t work for me, too !

just a question here
how is the memory usage of this compared to the stock htc dialer?

Well, I found "phcanOverbmp.dll" can't be overwrite during installing.
I am uploading a new cab without this file.

just a recomendation
you can make the porogram rename phcanOverbmp.dll to phcanOverbmp.dll.bak and then place the new phcanOverbmp.dll in the windows folder..after a softreset we can then delete the phcanOverbmp.dll.bak manually

I renamed phcanoverbmp.dll manually, but again can't install. Same error

The new "Diamond_PhoneCanvas Patch.cab" have uploading. Have been tested on dutty's rom 3.6 lite.

I've installed it. Now testing...
EDIT: It's working! Great work!!

Try the new one. My uploading speed tonight is extreamly slow.
So I can't upload more cab file.

[31.07]Alex-V WM6.5 23529 Rom and Kitchen (Post 3)

First i will say thanks to all the developers.....especially...to M-Amine..was the first rom i flash..to pdaviet (no polaris at this time)....and also a big big thanks to PCARVALHO.....best rom i try..
The ground i made a rom is...i don´t need and want the new m2d with flip clock and no call history....Inside my rom pack....is a folder with m2d version 1-3.......so you can decide what version of m2d you want....
The rom is a good mix of old and new apps... ( with opera 10 beta 2)
Edit: CHome with bigger photo tab and Lock device to right softkey....and in rom folder is special stuff for CHome..
and a new 100% battery
UPDATE: EzInput 2.1 or 1.5 + fullscreenplayer fix for play videos in Album + added the old taskmanager (it´s needed to close apps correct)
Take a look...
What is in the rom...?
At this time the most htc mega
Free Memory after boot
Storage around 80mb and Program around 50mb

THE STEPS
1. flash HardSPL--> for flash different roms ( a must have)
2. original rom--> the same like pcarvalho...
->and a hard reset if you see the calibration screen
3. my rom 23529 with EzInput 2.1
->and a hard reset if you see the calibration screen
3.1 my rom 23529 with EzInput 2.1 LITE
->and a hard reset if you see the calibration screen
3.2 my old style rom 23016 lite with 3g dialer --> around 100 mb free space
->and a hard reset if you see the calibration screen
4. For Startmenu with folder install this....(after install remove SPB Backup...its only shareware and not registered...but i need this to make this startmenu...it´s the easy way...change it in kitchen is very complicated...so follow the instructions---> for picture see post 3...
->use the file from 23518...and put on...normal mode
5. Install from my rom folder the M2D version you want...
Radio
6. radio 1.59.44.02--> to fix freeze

Kitchen
Rom Kitchen
http://www.4shared.com/file/N-m0ayo7/Polaris_Kitchen_engpart1.html
http://www.4shared.com/file/GuAow_KW/Polaris_Kitchen_engpart2.html
http://www.4shared.com/file/fJu75nqz/Polaris_Kitchen_engpart3.html
if you have questions...ask..!!
with kind regards...Alex

Bugs and donats
For Sync problems with outlook
I think i have it..... Have try it about 10x and it work for me...
the steps:
1. Disable the pop up for usb to pc
2. Restart the phone
3. in Active Sync/Windows Mobile Device Center-->delete all Partnerships....
4. Open Outlook
5. Connect the phone to pc (USB)
6. wait a moment-->create a new partnership
7. check the box for contacts
8. Sync
9. maybe a restart
For me it work perfect....please test it and give me a report if it work or not...
29.01.
If you have problems after flash my rom....restart....flash Orginal rom + hard reset if you see the calibration screen after that flash my rom also with a hard reset....after a complete boot a soft reset
Donat´s:
thanks..Daddycool99...for my first beer (donate)....
thanks jochenfrank for my second beer
thanks Jens Teipelke for my third beer
thanks stroger for my fourth beer

And what about us ?

sagytb said:
And what about us ?
Click to expand...
Click to collapse
yeah also big thanks to all that give my rom a chance..

Some screenshot plz.

How can i delete this post...??.... (only this)

Language?
what language?
only english

lcristofaro said:
what language?
only english
Click to expand...
Click to collapse
yeap...0409 english WWE....

the rom comes with EZInput 1.5.....because i think i can write faster...when wishes come for 2.0 i can reupload the rom....
wow...at this time 29 downloads and no issues....can´t believe it ..??!

Hi. Thanx for sharing ur work!
Any chance to have an italian version?! TY && Bye-

mylostnick said:
Hi. Thanx for sharing ur work!
Any chance to have an italian version?! TY && Bye-
Click to expand...
Click to collapse
a whole rom in italian or for me in german is very complicated...because all programs must be rewritten...Sorry but for now i must say no...don´t have the experience... i think a italien wm6.5 rom is in polaris upgading thread..
edit: italien rom: http://forum.xda-developers.com/showthread.php?t=548109

Unfortunately the cooker u mentioned bricked his Polaris so he can't cook anymore.
Anyway... what about a naked version of ur ROM in different languages?!
I think noone has probs installing his favorite software after flashing and, about Manilla, if u want to include it in the naked version this post perhaps can help u.
Anyway, thank u for all, indipendently by ur decision about multilanguage. Bye-

is there any chance you could give me a link to d/l the % battery meter cab only for now? im away for a while and logging throughmy polaris so i wont be able to test your rom fully now.
thanks in advance,
cheers,
t.

thanito said:
is there any chance you could give me a link to d/l the % battery meter cab only for now? im away for a while and logging throughmy polaris so i wont be able to test your rom fully now.
thanks in advance,
cheers,
t.
Click to expand...
Click to collapse
Ok...hope the cab work...report it please...
edit: install sdkcerts before install battery
Edit2: after report that the cab not work > i remodul the dll -->please test the new cab
i can not test it because in my rom is this as oem version and see in my pictures it work

mylostnick said:
Unfortunately the cooker u mentioned bricked his Polaris so he can't cook anymore.
Anyway... what about a naked version of ur ROM in different languages?!
I think noone has probs installing his favorite software after flashing and, about Manilla, if u want to include it in the naked version this post perhaps can help u.
Anyway, thank u for all, indipendently by ur decision about multilanguage. Bye-
Click to expand...
Click to collapse
I think about it...but not at this time...because of my work and the shift system...i have night shift....In late shift i have more time...Ok..
And please report bugs.....

60 downloads....
But no probs...??!!? Please report....!!!

[email protected] said:
Ok...hope the cab work...report it please...
Click to expand...
Click to collapse
thanx!will test soon..do i need to have sdkerts.cab install first for it to work,like other similar cabs require?

thanito said:
thanx!will test soon..do i need to have sdkerts.cab install first for it to work,like other similar cabs require?
Click to expand...
Click to collapse
right...sdkcerts is a good idea...

[ROM][ENG]FFBOY'S WM6.5 21914+Manila 20161332!Radio5005.1700.05!8/8

FFBOY'S ROM WM6.5 21914+Manila20161332 ROM with Radio Version 5005.1700.05
Credits to:
thx to my friend 风中游 who by me the TG01!
cedesmith,thx for ur great tool so that i can start cooking
TXH TO Chainfire's D3M drivers..
thx Baly23 for his HTC SKINED SYWPE
DFT support the resources
AND ALL OTHERS THAT HELP MY WORK
Changelog
1.change sys&xip to 21914
2.change HTC TASKMANGER TO XTASK,hope u will like it
3.add back some toshiba apps.
4.change backgroud of system
5.deleted CHOME
6.fixed music tab issue and some other issues..i can't remember well
7.may still have little bugs, also hope u can find for me
Manila 2017 still got some problem in change lang to WWE.. i will work on it!
may be release 22036 next few days
----------
1.Base as my 21908 clean rom,add Manila20161332.On boot RAM 66.3MB,ROM 236.11
2.deleted other Toshiba softwares except Photobase,VideoEditor,MMS
3.delete autokeylock as default ,u can enable it by "Start Menu"-"TOOLS"-"EnableAutoKeylock"
3.add HTC skined SYWPE slide touch input.
4.change iocns of folder in startmenu
5.u can change software binding of camera botton now
6.changge Programme GPS port to COM7
7.Use default WM style SMS client to reduce memory use
Knowing bus
1.when press"slideshow" on Picture&Video TAB,HTC ALBUM can not display right,the screen turns to full black.u can exit by "Home" or "Back" key.
2.Setting page in Weather Tab can not be selected,hope u can find solutions.
3.waitting for ur bug report!
Download:
21914+2016
--------------
TG01 WM21908+Manila20161332.rar
sorry for the chinese web storage..
download steps:
step1,click this
step2,click these donwload links
Screen

Sorry..find some little bugs
fixing...

wow I'm realy happy to see your new rom !!
Thx

Awesome finally a new ENGLISH sense ROM

I think SYWPE slide touch is not the best. I like FirgerKeyboard better.

released
2 little bugs
hope u can find solution so i can fix them!
enjoy

ffboy2009 said:
released
2 little bugs
hope u can find solution so i can fix them!
enjoy
Click to expand...
Click to collapse
hey ffboy,
Download speed is too low, ROM request: ORG TG UK ROM with all toshiba apps with coreplayer. but remove orange maps, help video nd other wallpaper update RADIO.
If possible add sense 2.5 2016, which is vga but full raw available on net.
thankyou.

harisharun said:
Download speed is too low
Click to expand...
Click to collapse
300k/s dl I thinks, it's so bad for free upload...

only 45 mb free ram??...

GPS does not work! As in the firmware without Manilla.
Installed GpsModDriver. In EXTERNALGPS update data. Run IGO. He sees the GPS module and satellites. Specifies the location in less than a minute. And as soon locates the GPS module hangs. The same thing happens with the Garmin. Once the module is hung, restart the software does not work - shows that the GPS module is connected, but no satellite can not see! Only helps the Soft Reset. The problem is hovering GPS module after determining the location!
PS The firmware series 23 .... no such problems. GPS works well.

mario_psy said:
only 45 mb free ram??...
Click to expand...
Click to collapse
I'm working at Manilla, Inesoft Phone and S2U2 ~ 60 mb

Nice to have a new sense rom, thanks!

SD download failed.... why ? .... anyone can tell me ? thx

DutzuSv said:
SD download failed.... why ? .... anyone can tell me ? thx
Click to expand...
Click to collapse
You HAVE to use SDDL+

great rom indeed
only lacks ram, but this is a problem already known
just a suggestion and many already said so: your 6.1 with sense would be great as it has a huge amount of ram

InsertNameHere said:
You HAVE to use SDDL+[/URL]
Click to expand...
Click to collapse
I'm use SDDL+.... and I rename the rom to "TG01WP_00.tsw" same... SD Download Fail

Downloaded file without extension is RAR archives. Rename the downloaded file to RAR and extract the firmware from the archive.

kozar said:
Downloaded file without extension is RAR archives. Rename the downloaded file to RAR and extract the firmware from the archive.
Click to expand...
Click to collapse
BIG thx man

iceeyes91 said:
great rom indeed
only lacks ram, but this is a problem already known
just a suggestion and many already said so: your 6.1 with sense would be great as it has a huge amount of ram
Click to expand...
Click to collapse
+10000001010! 6.1 and sense

kozar said:
GPS does not work! As in the firmware without Manilla.
Click to expand...
Click to collapse
Radio 1600.05 has disconnection problems, i never use it, i always change to a better radio. Unfortunately for experimenting reasons i mixed this rom with radio 5001.0300.76 only to find out that it also has disconnection issues. Call quality is quite good though.
By the way, WoW, this new sense is blazingly fast! faster than both previous versions i've tried. As for ram, you could leave out the manilla phoneskin, that could give you about 6-10mb more, but then again it is too beautifull and practical to leave it out and it wouldn't really be sense without it

[solved] unable to connect gprs/edge in cooked rom

hello everyone,
sorry for the new thread.im having elfin and trying to cook my own rom with os kitchen( latest version ),and with mega ext packages and 3.14 elfin drivers.the rom is working perfect except gprs/edge connection.i used many available versions of connection setup/DBs ,the device configurates automatically for INDIA ,BSNL-SOUTH but when i try to connect it willnt connect.though the same connection setup and provision.zip present in other cooked roms of onyx,mikys works without fail.even i tried to cook with dumping stock rom and rebuilding it,in that also im not able to get connection working.since a month or so im searching many forum,threads but no solutions.hence asking through new thread.any help??.should i change anything in sys,oem or ext files??any reg.tweaks??
plz help

Try cooking in a full Sys and see if it works. Don't leave out a single package. That's all I got.

Farmer Ted said:
Try cooking in a full Sys and see if it works. Don't leave out a single package. That's all I got.
Click to expand...
Click to collapse
hi,
thanks for replay.let me try rt away.

Farmer Ted said:
Try cooking in a full Sys and see if it works. Don't leave out a single package. That's all I got.
Click to expand...
Click to collapse
hi, thank you very very much.as u advised i cooked all the sys packages which i used to left behind as the kitchen mentioning them as useless,the connection to edge/gprs worked .now i have to pinpoint the package which is responsible for my problm among them (auto update,Enterprises,IPSCEPVPN,SqlCemobile,and WWLAN), Thanks Farmer Ted once again.
now can i ask 1 or 2 minor issues??
1.regarding HTC Album-is unstable in my device starting frm the wm 6.1 stock rom to my cooked rom including very stable roms of onyx,mikys cooked roms.whatever versions of album i use landscape or portrait mode,the photos opens up then goes back to todays screen or device hangs,searched many threads no answer.
2.regarding autorun,runcc-when i use autorun the themes willnt get installed,when i use runcc they get installed evrything works o.k but the date and time which we sets while 1st boot process reverts back to the default one.what wrong im doing??and how to get the time,date of privious rom??
help is very much appriciated.
thanks

Home weather updater
hello guys,
i have another problm now when i cook manila home weather updater into the rom the manila wiillnt launch,whether i use it as oem package or as cab into customazisation.
and when i install it after flashing the home weather is not picking up the weather from weather tab in manila(whether i use with or without mortscript).
any suggestions???