Hi
I downloaded a torrent on the new Eclair 2.0.zip but there are no installtion instructions included in the zip file how do i get this app installed
no install
Eclair is the next version of Android OS...it must be about 90 Mb in size...
first you must do a nandroid backup
then put the .zip file on a SD card ( *.zip or update.zip)
if it's update.zip just update else update form file...
then reboot...
this is a quick reply...for upgrading OS there must be a complete post...with every step you must make in order to not brick your phone...
It isn't that simple. There is only one phone designed for 2.0 at the moment, and that is the Droid. Getting it working on any other phone is not simple as there are no drivers and a lot of hacking needed to get it to work correctly. You cant simply overwrite everything and expect it to work.
Go to the correct forum for you phone and look around. There are a few eclair based ROMs available for the Dream already. Cyanogen is working on his new experimental branch that is Eclair based.
ROM: (HonnyComb)
Here is an ACER 3.2.1 near stock android image installable via clockwork recovery.
(Tested on a Wifi only acer a500)
[size=+2]acer7.014.14_CUST_ROOT_BBv4_S.zip[/size]
(MD5: cfd6ecee33891cc8e6e2625e8ea89511)
Note: April 30, 2012: The stock kernel will work both on HoneyComb and unlocked (v3) ICS bootloaders
Note: May 18, 2012: The update, no wipe required, to this ICS rom is now posted here this thread will remain for anyone remaining on HC
Simply install via clockwork or RA recovery; if you have a rooted and mostly unmodified version of HC 3.1/3.2 currently it may be possible to use this install without a wipe (4.010.41 users are likely to have the best results); However make sure you backup first just in case.
Users of the previous (acer7.006.01_CUST_ROOT_BBv2) version may safely upgrade without a wipe however the following is recommended: 1) wipe dalvik cache in the advance menu of CWM recovery, 2) you may need to the apps menu to get the new market icon (my previous homescreen shortcut was no longer valid but the one in the app list worked without a problem, as making a new shortcut)
Last if you notice slowdowns or forcequits withing 24/48h of upgrading before reporting them try going into recovery and running both "fix permissions" and "clear dalvik cache" then boot the tablet waiting for the logon screen to appear and the screen to dim and turn off before using the tablet. At this point you van use the tablet normally.
This file is based off the OTA update: Acer_A500_4.010.41_7.006.01_COM_GEN1_1315966386585_07733ac7.zip subequently updated to 7.014.14_COM_GEN1 by manually extracted these images
(As was sent via OTA here in canada)
Modification Log:
I've made the following changes to the original OTA files:
decrypted and configured for installation from clockwork recovery
remove the bootloader flash (Separate analysis will be required to tell if this is safe) If so it is still not useful in a rooted Clockwork rom install, since in future it may become a downgrade not an update.
remove recovery flasher
remove both OTA cert and original ca_certs in favor of the cacert by guardianproject
Add a version of busybox (built in my HTC Dream rom ezGingerbread build tree using target utility_busybox from the commit https://github.com/CyanogenMod/android_external_busybox/tree/995d0d35bde285)
make busybox the default shell
Include Superuser/su
configure runparts (runs scripts in /system/etc/init.d) only a "Welcome" script is included however if you wish to run any script on startup you can do so by adding them to your /system/etc/init.d directory)
Note this rom is still odexed
(v2) fix she-bang on am, bmgr, ime, input, monkey, pm, svc shell scripts
(v3) incorporate "Skype Fix" into rom, thus no need to flash a second file to fix skype video calls (obviously you still need to install skype from market)
(v3) incorporate "wifi fix" for infinate DHCP leases, unfortinatly this was still not working in the base rom, however the fix is now part of this install.
(v3) uninstall Future Dial (acer updater) this prevents the system update from appearing in the menu/background, as it won't work anyway with the modificaitons
(v3) rebased to Acer A500 7.014.14_COM_GEN1 (previously 7.006.01_COM_GEN1)
(v3) SuperUser updated to v3.0.7
(v3) Set wifi only by default (if you need otherwise you will need to comment out the last line of the build.prop file, information in the comment above said line)
(v4) Remove extra market related files (merge errors from the acer patches); this ensures the new version of market runs properly (thanks to civato for pointing this out)
* entries starting with (vN) - indicates fixed/added in version N, ie (v2) indicates fixed in version 2 and on
Additional Information:
This is a very simple set of changes that ought to allow rooted users looking for a basic version of Honeycomb 3.2 (and now 3.2.1) safely update without loosing root. Its intended for users that wish a minimally modified rom with root. Either to be used as a rooted stock rom as is; or to be a base to make other small modifications as needed.
As such I'm more likely to provide addons than changing the base rom its self. (excluding any bugs of my creation or new official releases form ACER)
Note the kernel is the stock kernel from acer. Acer's A500 kernel source code can be found at here
FYI: You may use this as a base for other roms as long as credit is given with a link back to this thread where reasonable.
Add Ons
~~-- Stock Kernel Modules --~~
Here are some kernel modules for the stock acer kernel
(Tested both on acer7.006.01_CUST_ROOT_BBv2_S, and acer7.014.14_CUST_ROOT_BBv3/acer7.014.14_CUST_ROOT_BBv4)
tun.ko
md5: bf93f2538c875f0f397f43f225bd595b
cifs.ko
md5: 86b936fb269daa1f688f3f8535c36c23
Since I'm having problems with a corrupt tar.gz file with the latest posted [by acer0] a500 kernel code; these have been built from the a501 version with a a500 config. (the "Application Guide (for Android 3.2 HoneyComb" posted on 9/19) Hopefully this will not be an issue but let me know if you have any issues with the modules (I've checked they load but not that they are fully functional)
~~-- Villain Iconia Kernel --~~
(Tested both on acer7.006.01_CUST_ROOT_BBv2_S, and acer7.014.14_CUST_ROOT_BBv3/acer7.014.14_CUST_ROOT_BBv4)
Here is a re-bundle of the Villain Iconia kernel (original zImage form richardtrip) The installer however has been modified since we now need a new ramdisk image than the one previously bundled with the kernel.
V3.7
acer7.006.01_CUST_ROOT_BB_Villain_iconia_kernel_3.7_S.zip
md5: 57908bd9d8fda3902cc24ebb23de9e6c
Previous verison:
acer7.006.01_CUST_ROOT_BB_Villain_iconia_kernel_3.4_S.zip (md5: 8c6c0783a961d65d465a3f3dccffbfb3)
For more information including source code see Villain_iconia_kernel_3.4.zip from Stock/HV/Taboonay V3.4 for HC 3.2 10-09 - 1.64Ghz/UV control
(This will let you overclock and access some more modules, but I've found the stock kernel overall more stable)
--------------------------------------------------------------------------------------------------------------------------------------
[Size=+1] The following is only for the previous acer7.006.01_CUST_ROOT_BBv2_S version:[/Size]
---------------------------------------------------------------------------------------------------------------------------------------
~~-- Wifi Dropouts Patch --~~
If you are having issues with your wifi connections it is recommended to check your router doesn’t have indefinite DHCP leases
However if you can't prevent the indefinite lease a patch for such dhcp connectivity problems is available:
wifipatch_7.006.01v2_S.zip
MD5: 39c0a1cdd755458eb6edd6aa786e4f5f
Additional details here
(Note this have been built in on V3 and thus is no longer needed)
~~-- Skype(tm) Patch --~~
Fixes video calls on market skype client
skypepatch_7.006.01v2_S.zip
MD5: 99cadf8c5b8eca25aa60b38aa83ec91a
Flash from recovery; and install skype form market as usual (or open it if already installed) video options will appear in settings.
Details of the problem/solution and the patch are in this post
(Note this has been built in on V3 and thus is no longer needed on that version)
~~-- Netflix --~~
Install from market:
https://market.android.com/details?id=com.netflix.mediaclient&feature=search_result
If you previously installed a modified version such as the one modified to play on the a500 without breaking video you will need to uninstall the modified version prior to installing the market version.
~~-- Cell Standby fix/option --~~
If you are seeing Cell standby in your battery use simply add ro.carrier=wifi-only to your build.prop
Via adb:
Code:
adb remount
adb shell
echo 'ro.carrier=wifi-only' >> /system/build.prop
sync
reboot
Via terminal/local connectbot
Code:
su
mount -o remount,rw /system
echo 'ro.carrier=wifi-only' >> /system/build.prop
sync
reboot
(Note this has been built in on V3 and thus is no longer needed on that version)
~~-- SuperUser 3.0 update --~~
We need to flash the rom manager update, but as rom manager is not yet working on this tab get the update zip and flash in recovery:
su-3.0-efgh-signed.zip
Md5: c05902fdf90f7635c711e4dcd1c32c45
(Note this has been built in on V3 and thus is no longer needed on that version)
~~-- Previous Versions --~~
[size=+1]v1: acer7.006.01_CUST_ROOT_BBv1_S.zip[/size]
(MD5: df11f6a309f34ac4c0209aded4ca3f20)
This version had an error in the she-bang of the included scripts such as pm, v2 corrected this to the expected '#!/system/bin/sh'
To save bandwidth I'm not providing the original file; however you can re-generate it with the following binary diff:
On a linux computer with the bsdiff package installed run:
Code:
bspatch acer7.006.01_CUST_ROOT_BBv2_S.zip acer7.006.01_CUST_ROOT_BBv1_S.zip acer7.006.01_CUST_ROOT_BBv2_to_v1.bsdiff
Using the v2 version and acer7.006.01_CUST_ROOT_BBv2_to_v1.bsdiff
[size=+1]v2: acer7.006.01_CUST_ROOT_BBv2_S.zip[/size]
MD5: b254140896742f3deec464c094fb2515
Longtime running version very stable, however some users have had some minor issues correctable by the above patches.
[size=+1]v3: acer7.014.14_CUST_ROOT_BBv3_S.zip
[/size]
MD5: c734317089d323dffde9c7d4fe7afce4
Inital upgrade to 7.014.14 had some issues with extra market related files, if you are running this version it is recommended to upgrade to V4 or (if you wish to avoid the download and the cost to me of the bandwidth) follow the instructions here to manually make the same change yourself.
Does Netflix work or do you still have to use a patch
Sent from my Nexus S 4G using XDA App
ruffjd said:
Does Netflix work or do you still have to use a patch
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
I still needed the patch (you will need to apply it by hand)
I hear rumor's [but have not spotted it first hand] of some library that works with both camera and the library.. if I find that one I'd be happy to make a flash-able patch.
Also looking at the Stock/HV/Taboonay kernels, since he is not extracting the ramdisk from the existing boot.img it looks like they will not be 100% compatible with this rom out of the box. (will make something up shortly)
10/2: see note one netflix
Thanks, Working Great
I flashed from 4.010.13 without a full wipe without any issues. I cleared cache, wiped dalvik cache, and flashed. Thanks for your work. This ROM will be very useful for those of us that want to retain root and take advantage of the stability that the stock ROM brings.
Small bug with shell scripts such as pm, This can cause problems with rooted applications expecting them or adb commands, to fix just grab the updated version at the top of the op acer7.006.01_CUST_ROOT_BBv2_S.zip
If you already updated you can safely flash this new version over your current one; however if you subsequently changed items in /system (such as the netflix hack) you will need to make the change again after the upgrade.
Apologies for missing this in my initial testing last night. (my fault for working on this practically while sleeping..)
.. and A501 3G
why is it that when scrolling apps or scrolling of the home screen became sluggish after installing 3.2?
superbar said:
why is it that when scrolling apps or scrolling of the home screen became sluggish after installing 3.2?
Click to expand...
Click to collapse
If you had a non stock rom ported from another device it could be just incompatible data and a wipe is needed.
If it was a stock rom it could be a data issue try wiping dalvik cache and running fix permissions in recovery.
It could also be something ypu have installed. (Widgets in particular)
I see no slowdown really I don't see much difference from a user perspective from 3.1.
Börger said:
.. and A501 3G
Click to expand...
Click to collapse
This is a a500 stock rom with root modifications..If it works on a a501 great.. but if not I can't support it.. its another device.. Likely 3g will fail.
If works or you have a patch for me to make it work feel free to let me know however.
I wondered how you got the OTA when you have A500_4.010.41 originally ??
I thought North America the latest HC3.1 was version A500_4.010.13_COM_GEN2 ??
anyway...
I am on A500_4.010.13_COM_GEN2 rooted with CWM... should I go ahead and flash this ??
I understand that it will keep root... and since I will have root... I guess I can use "Acer Recovery Installer" to re-install CWM ??
and freaking Acer !!!... we were on GEN_1 originally awhile back (HC3.0.1)... then went on to GEN_2 (HC3.1)... now with HC3.2 they are back with GEN_1 ??... freaking confusing idiots !!
and the A501 is keeping this format (4.015.01)...similar to HC3.1 format !
while us A500 is going to this format (7.006.01)
Side note:
If we are seeing custom roms for HC3.2 keeping root..etc... why can't dev managed to root stock 3.2 ??
and is the CWM recovery working for 3.2 ??
UnicornKaz said:
I wondered how you got the OTA when you have A500_4.010.41 originally ??
I thought North America the latest HC3.1 was version A500_4.010.13_COM_GEN2 ??
Click to expand...
Click to collapse
No clue was what the device auto updated to what I had, then I rooted (+ intercepted the OTA last night).. I don't know the regions ACER is using.. butthe tab was purchaced at a local staples.
UnicornKaz said:
I understand that it will keep root... and since I will have root... I guess I can use "Acer Recovery Installer" to re-install CWM ??
Click to expand...
Click to collapse
The update I've provided won't touchrecovery, so you keep your current recovery and thus can restore your backup even if you mess up the rom.
You also will have root so you can re-flash reocvery if something goes wrong. But likely won't need to.
Last I'm not touching the bootloader so that will also remain as is.
UnicornKaz said:
Side note:
If we are seeing custom roms for HC3.2 keeping root..etc... why can't dev managed to root stock 3.2 ??
and is the CWM recovery working for 3.2 ??
Click to expand...
Click to collapse
Keeping root is diffrent from rooting the new system:
To keep root I pull the update zip from the system without letting it install, then I decrypt it (since acer encodes it) unzip it, then manually add/remove files to the update zip before installing via clockwork.
This way I don't need root to install superuser/su on a locked down system, but just install it via clockwork with the correct permissions.
Also recovery is seperate from the andoid system (seperate linuxkernel/ram disk from the main boot kernel/ramdisk) We need not touch it when installing a rom (even if most stock roms by default like to reflash recovery.)
I flashed my Packard bell libertytab with this rom and everything is just fine.
CWM and root.
Thanks.
Edit: I got the Thor 3.4 kernel running on it and it is fast.
24/7 at 1544MHz and even 1680 is no problem with it.
Max cfbench overall score is 9175.
my only problem is that the OP doesnt sound too sure of himself if this rom is even any good
thats just the feeling i got after reading his first post
it almost sounds like you dont have an iconia to test this on.
i do hope i am wrong. i guess i have not seen anyone post a rom and use the words in the manor you have. it just made me feel uneasy about if the rom even works.
Sent from my A500 using Tapatalk
v_lestat said:
my only problem is that the OP doesnt sound too sure of himself if this rom is even any good
thats just the feeling i got after reading his first post
it almost sounds like you dont have an iconia to test this on.
i do hope i am wrong. i guess i have not seen anyone post a rom and use the words in the manor you have. it just made me feel uneasy about if the rom even works.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
I have an icona.. and its running the rom.
But the OTA hasn't even been out 24h (rooted or otherwise) so I've not had the time to really put the rom into its paces (nor has anyone else not working at ACER)
The other thing is my position on this rom; That is unless there is (a) a bug in the modifications I did make to provide root and some tools for end users to add their own tweaks; or (b) another official release provided by acer: I do not want to be updating the base rom; it ought to remain nearly as close to the stock OTA as possible (and any exception to this is already defined in my modification list)
Now if you have a interesting addition.. Or I come up with an interesting hack I'm happy to provide/advertise it as an "Add on" that the user may optionally flash on top of the rom to obtain the additional functionality.
(Of course I much rather work on roms with accessible source code.. unfortunately we will not be able to make such a thing until Google releases the source for Ice Cream Sandwich)
Rom appears to work fine fine. Cleared cache and dalvik cache and flashed to my Iconia with CWM from stock 3.1 and voila - 3.2
Flashed the modified HoneyVillain Kernel in post 2 and overclocked to 1504. Everything working fine so far. Netflix working with patch (rear videocam FC as usual).
I'm hoping for better battery life than Taboonay. Maybe it was just me, but I had awful battery life with Taboonay compared to stock.
Bob
---------- Post added at 05:12 PM ---------- Previous post was at 04:44 PM ----------
I should mention after flashing that kernel I put ro.carrier=wifi-only into /system/build.prop to remove cell standby from battery use.
Also, since I didn't do full wipe, this truly came out as an upgrade, since everything on my tablet stayed the sam ein terms of apps and configuration
Scrolling thu home screen is smooth now but scrolling thru apps still lags, not as smooth as 3.1, I wipe my dalvik cache and clean wipe, should I wipe my partition?
As I just got the update notice today (US) for 3.2 I suppose the only question I would have is... can you tell me exactly how you did this so I can do it and only have su installed. Dont misunderstand as I appreciate the dev aspect of things but I have yet to see a stock rooted ROM or direction on how to that anybody hasnt 'tweaked'.
He already explained a few posts before. He took the update, dismantled it and took out the bit that will upgrade your recovery and wipe out the root. Repackaged it and viola! instant magic!
HarshReality said:
As I just got the update notice today (US) for 3.2 I suppose the only question I would have is... can you tell me exactly how you did this so I can do it and only have su installed. Dont misunderstand as I appreciate the dev aspect of things but I have yet to see a stock rooted ROM or direction on how to that anybody hasnt 'tweaked'.
Click to expand...
Click to collapse
HarshReality said:
As I just got the update notice today (US) for 3.2 I suppose the only question I would have is... can you tell me exactly how you did this so I can do it and only have su installed. Dont misunderstand as I appreciate the dev aspect of things but I have yet to see a stock rooted ROM or direction on how to that anybody hasnt 'tweaked'.
Click to expand...
Click to collapse
Most of the "tweaks" in here are you find not as optional as you may think.. Particularly for a distributed product.
However I've not modified any binary files; this means all the changes are either text files or removal/addition of binary blobs thus to see what I've done:
You need the official OTA image and to decrypt it/unzip it information is here:
http://forum.xda-developers.com/showthread.php?t=1113878
(As well on two 3.2 update related threads happening in the a500 dev section)
Once you have unziped the zipfile and update.zip will be visible and is the base of the update.zip for this install.
In that file is system files, recovery flasher files a boot.img (this contains the ramdisk where I have modifications so adb shell works as root look into extracting the ramdisk with cpio) and scripts to help in the installation of the rom.. the updater-script (a few dirs under META-INI) is the script recovery runs.
From here you can compare the files in the official archive with mine, or ignore mine and modify the install to your own liking.
For best results knowing the structure of the files in system and how linux/android boots is important. Otherwise this is a hands on exercise, there is only so much advice I can give,thus looking at the original and seeing what I touched will likely provide insight particularly if your are stuck.
In the case of su/superuser I just pulled from the official zip on rom manager provided by ChainsDD (links at https://github.com/ChainsDD/Superuser/blob/gh-pages/manifest.js ) and placed them into system making sure to add the suid perm on su in the updater-script. This however will not allow adb shell as root or prevent clockwork recovery from being over written.
There is a bit of a learning curve.. even if to me this type of hack is trivial and I only bothered doing it so I could have the 3.2 OTA without loosing root, and without what I think are silly tweaks some other devs add.
suomaf said:
He already explained a few posts before. He took the update, dismantled it and took out the bit that will upgrade your recovery and wipe out the root. Repackaged it and viola! instant magic!
Click to expand...
Click to collapse
Not very technical.. but once you decide to use the rom yes is about how its supposed to act.. And how I hope most of those that have downloaded the image think of it.
When i flash this, and reboot, i hang on the Acer bootup logo. No changes. I can go back into recovery and restore, but i can seem to get this to flash properly. I'd like to have a nice clean minimal 3.2.
I even wiped and did a clean instal, one note it did say
Offset:0x180
Before it said installation complete, it also 'installed' the file far to quickly in my opinion.
I was trying to root my New Acer Iconia Tab A500 with the help of following thread http://forum.xda-developers.com/showthread.php?t=1138228
I am new at this and stucked at
"3. Copy the file to your Iconia
4. Install the APK & start the tool"
I connected the Tab with my PC with USB cable and Copy the iconiaroot-1.3.apk to the root folder. Now How can I find it from the tab and install it.
I bought the Tab from China and there is no Market pre installed there. I cannot Download any SW. Really frustrating !!!
Android Version: 3.1
kernel Version: 2.6.36.3
Build number: Acer_A500_4.019.08_AAP_CUS4
Please Help !!!!
wireless.bgd said:
I was trying to root my New Acer Iconia Tab A500 with the help of following thread http://forum.xda-developers.com/showthread.php?t=1138228
I am new at this and stucked at
"3. Copy the file to your Iconia
4. Install the APK & start the tool"
I connected the Tab with my PC with USB cable and Copy the iconiaroot-1.3.apk to the root folder. Now How can I find it from the tab and install it.
I bought the Tab from China and there is no Market pre installed there. I cannot Download any SW. Really frustrating !!!
Android Version: 3.1
kernel Version: 2.6.36.3
Build number: Acer_A500_4.019.08_AAP_CUS4
Please Help !!!!
Click to expand...
Click to collapse
first thing is to go in to the tablet settings and make sure "unknown sources" is checked, or you won't be able to install the apk. Then the best thing you could do is to use the browser on the tablet to download the iconiaroot apk, then once you have downloaded it you can click on it in the downloads to run it (instead of loading it through your PC)
Your next step should be to do the same thing with a market apk (google it and I'm sure you can find it) and get yourself a file manager, it will make future such things much easier.
Thanks, Unknown sources are checked and I also tried direct download to Tablet. But After Download, it doesn't install. Says can't open.
So plz inform, what to do next ???
Did you download an apk file? or a zip of an apk file? if it isn't the apk itself it won't work.
If you did get the apk, then I'm not really sure... maybe someone else has an idea? the other option would be to start by flashing a stock ROM from this thread to make sure you are starting from the same place as everyone else (if you want root stick to one of the HC3.1 series, I'd recommend 4.010.38)
Finally i got what i want with the help of http://forum.xda-developers.com/showthread.php?t=1113878...
Thanks
Hello, I do own an Iconia Tab A100. it has the new 3.2 software.
I would like to get root rights (to ajust gps settings and so on) can I use this root tool on this device?
johndijkstra said:
Hello, I do own an Iconia Tab A100. it has the new 3.2 software.
I would like to get root rights (to ajust gps settings and so on) can I use this root tool on this device?
Click to expand...
Click to collapse
There is no root for 3.2 Well not unless it came this morning
.
You are stuck
Hello,
my borther brougt me this tablet from china for chrismas: Lenovo Lepad y1011 (sry can't send a link becaus i'm a new user...)
But Lenovo has changed everything on android and they call it OS 2.0 (= Android 2.2 )
Maybe someone found a solution to update the OS to honeycomb or to install CWM?
I have read so mutch chinese forms but the googletranslator didn't find something usefull for me.
I hope someone of you may help me.
thx MiracelVip
_____________________________________________________
Here is a mirror for the roms:
3G001_0100.3010_user_mode(1).rar h**p://ul.to/mmv76osx
WiFi001_0100.3010_user_mode.rar h**p://ul.to/26utcnuo
hi, the thinkpad tablet never came with anything lower than 3.1, also that isn't a valid model number for this tablet.
I think you must have something other than a thinkpad tablet
Cheers
Tom
Check here, shows the instructions for that model.
TS
Yes i know this thread! But its just about rooting and installing google maps and the market... but the market in this thread isn't working anymore! i think the version is to old...
but i hate the lenove OS, i would like it to install another one or maybe develop my own one if CWM would work
it's this one: h**p://appserver.lenovo.com.cn/shop/shop_Detail.aspx?gdsid=A2100014142
Unfortunately, it's said that Lenovo has no any upgrade plan for this pad. LePad S1(Y1011) is the first mode of pad from Lenovo. the product, particularly its deep customized OS, is in very low maturity. short after its released to the market, it's ended production and replaced by A1 series pad. that's the situation, so disappointed, and angry. and finally, its ROM leaked.
i searched some Chinese forum and got the following leaked ROM:
* LePad S1 Ver_Wifi ROM here
* LePad S1 Ver_3G ROM here
* resource pack here
hope it helpful to you guys who may interested look into the code
Thanks for this informations! Does someone know what we can do with this files?
________________________________________________________________________
This files are working! While I tried to install Gapps i bricked my Y1011 and i was able to reflash everything by using fastboot and LePad S1 Ver_3G ROM.
thx again for the files
hi i have the same tablet and really heavy problems. i look at all chinese forums with google translation and it is horrible to find anything about a working custom firmware.
if you instal the upper firmware it will be nice to tell us something about the changes. when i want to download i didnt work download allways stopp. the name is the same like the orriginal number.
im loking for a stable full android version. im read that there is a chinese caled chita he costum firmware for the lephone and the lephone works normal withe leos like the lepad.
so if anybody knew news about the lepad y1011 it wil be nice to write it here.
mfg
thorwald
yes i was able to install the firmeware above but ther are no changes! its just a leaked original version
at the moment i'm uploading the firmewares to uploaded.to
watch the 1. post
Thanks for your post. So i wont install the leaked rom if it isnt a full android. Do you know anything about Chitas Roms.
I worked with Costum Rom for my Archos Tablet and for HTC sensation xl but i m not god enough to custom a own one.
But i got Market place working without Gaaps. I have some mistakes with 492 but only by a few apps.
Thanks for upp the Files if I break it its easy to unbrick it. I will download it.
If some from China will inform us it will be very nice.
you have been able to install the market?! could you give me tutorial how you have done this? and thefiles you installed?
everytime i've tried it i bricked my device
(gerne auch auf deutsch )
At First German is on this forum not allowed. Forum rules (mir wärs auch lieber)
I have got market work with some mistakes on some files got mistake 492 if you find the APK on other Place the most will work but not with autoupdate.
Some Games will not work bcause the OS2.0.0 The Hardware is god enough
So here are how to do it
Install LeTools on Windows 7 PC. it is assumed that LenovoStore on your Lepad is already connected usin wifi.
Connect USB cable with Windows 7 PC
unzip attached file to your PC.
1. Copy all attached files to your LePad using LeTools in any known directory.
2. Use LePad filemanager and click on z4root.apk and install it. Its icon will appear on last Desktop
3. Use LePad file manager and click on Root_Explorer.apk and install it. Its icon will appear on last Desktop
4. Click on Z4root icon to run it. select temporary root permission
5. Click on Root_Explorer icon. It may say that it needs a restart to gain root access. so re run.
6. Now little hardwork. Find the folder where you copied the files. You have to copy following files to the folder /system/app
a. Vending.apk
b. Network location.apk
c. Market updater.apk
d. talk.apk
e. googleServicesFramework.apk
f. googlePartnerSetup.apk
7. Touch the file name and hold for a second, menu will appear. Select copy and go on top of listed files where .. is there for going to previous directory. keep going back till you reach the root folder.
8. Go to folder /system/app and touch the copy button at bottom of LePad screen.
9. Repeat the process for all above files.
10. Change the permissions on each copied file by touching the file name and holding for a second, from menu selecting permissions.
Select permissions as follows
User - Read and write
Group - Read
Others - Read
11. Now shutdown the LePad and then Power On.
12. Use file Manager and go to folder where you initially copied the files. Touch the Vending.apk to install it.
13. Now you should have Google market icon on Last Desktop.
14. All the best. You are needed to have a gmail account to use Google market.
I will look were i can Upload the files. If you start and stop the market it will automatik update to the 4.3.3
h**p://dl.dropbox.com/u/56215670/rootet.rar
Hope i could you Help
MFG
Thorwald
Any chance that there will be an Custom Rom For the S1 with android v2.3 or v4?
New LEOS vers. in China
Ther is a new leos version upcomming in china vers Nr WiFi001_C_S_1.0100.3014.rar
Hopefully i will update it in a Few days after Test
MFG
Thorwald
I have an Acer Iconia A500 running ICS (Rooted) but I can't figure out why it isn't flashing in Custom Roms... I know how and have while I still had HC. Anybody help I've read a couple fourms saying that I need to change my boot loader. But that requires me knowing my CPUID which I don't know... I found a program called Afterota v1.0.9 on here downloaded it and then double clicked on the icon it asks me if I want to allow the following program form an unknown publisher to make changes to my computer. I click yes nothing happens... HELP PLEASE!
david.manske said:
I have an Acer Iconia A500 running ICS (Rooted) but I can't figure out why it isn't flashing in Custom Roms... I know how and have while I still had HC. Anybody help I've read a couple fourms saying that I need to change my boot loader. But that requires me knowing my CPUID which I don't know... I found a program called Afterota v1.0.9 on here downloaded it and then double clicked on the icon it asks me if I want to allow the following program form an unknown publisher to make changes to my computer. I click yes nothing happens... HELP PLEASE!
Click to expand...
Click to collapse
1. So hopefully you have cwm installed and will be able to find your cpuid the easy way. In the backup folder of cwm is a txt file that holds your cpuid. Write this number down and save it in multiple locations if u need to....if you still cant get it then try one of these methods http://forum.xda-developers.com/showthread.php?p=25429111#post25429111
2. Acer Drivers from the acer site
3. Google drivers from the android sdk (attached in link above)
at a guess from the info you provided, the issue maybe the number one thing that stops everyone in their tracks - having the drivers installed....correctly...have a good read of that post