android on htchd2 problem - HD2 Android Q&A, Help & Troubleshooting and Genera

hello dears friends..
i have problem with installation android on htc hd2..
my manilla ver.
2.5.20121429
rom ver.
1.72.119.0(82124)
radio ver.
2.07.51.22_2..
please...when i can install rom on my htc,,...
thank you..

read the thread about android first you're radio is wrong second you don't flash it, third READ

wrong radio.
get a radio 2.08 or higher.

matesitum said:
hello dears friends..
i have problem with installation android on htc hd2..
my manilla ver.
2.5.20121429
rom ver.
1.72.119.0(82124)
radio ver.
2.07.51.22_2..
please...when i can install rom on my htc,,...
thank you..[/
Start from scratch,
Click to expand...
Click to collapse

hier the best ROM perfect
http://forum.xda-developers.com/showthread.php?t=2098722

Titanic52 said:
hier the best ROM perfect
http://forum.xda-developers.com/showthread.php?t=2098722
Click to expand...
Click to collapse
hohoho
I will recommend a CM7 (android 2.3.7) for novice. It is much faster and more stable.

Tytung JB is so far good for me, not the best, but good for daily use!

The Best ROM Für HD2
The Best ROM Für HD2
http://img477.yukle.tc/images/2898Screenshot_2013-03-19-21-45-26.png
V8-Motor
http://www.lautsprechershop.de/hifi/images/v8.jpg
The Best ROM Für HD2
[17/03/2013] [JB] [4.1.2] Pixeldroid Jelly Bean V8.0[AOKP] [BeatsAudio] [720p]
installed this ROM to tell my beloved HTC HD2 and I have to
I am very impressed. It is very fast and stable. like a V8 engine, it runs very fast
In the coming days and the future I will. ONLY This ROM use more battery life It is less than normal Windows it needs.
Thank you for this great piece of work ... or should I say art.
Thanks, Thanks-pixel-freak-for perfecting your hard work this ROM.
Thank you / Thanks Pixel Freak:good:
Titanic

I got a used hd2 that was already unlocked. US TMOS with magloader installed 1.03 and PB81220 HX-B3
SPL-2.08.HSPL 8G XE
How do I find out what radio version I have? Also I downloaded paranoid android, but it didn't come with info on how to install it on my phone. is there a basic tutorial that shows how to install roms? I've been reading on here for months and did get win7 installed, but it's horrible so I rather put android on it.

LGHT said:
How do I find out what radio version I have?
Click to expand...
Click to collapse
If Android boots go to system settings / about / baseband.
Or, just flash the radio you want and write down the version.
---
If you have a 50% chance of being right, you will be wrong 90% of the time...

You have a TMOUS so don't worry about the radio, it's fine. As for a good guide, read the one in my sig (which tbh you should have found yourself by searching).

iphuang said:
hohoho
I will recommend a CM7 (android 2.3.7) for novice. It is much faster and more stable.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2098722
It is much faster and more stable..
V8

NYLimited said:
If Android boots go to system settings / about / baseband.
Or, just flash the radio you want and write down the version.
Click to expand...
Click to collapse
I don't have android install I'm trying to setup a dual boot win7 and android and only have win7 installed so far.

LGHT said:
I don't have android install I'm trying to setup a dual boot win7 and android and only have win7 installed so far.
Click to expand...
Click to collapse
I don't know windows 7 but I would think it has a module to tell you which radio is installed. Anyway, you should be able to flash a radio without disturbing the rest of the device.
---
If you have a 50% chance of being right, you will be wrong 90% of the time...

Related

[Q] Android on 512 mb ROM HD2

hi There!
this thread is about to install or run Android on non T-Mobile 512 mb ROM based HTC HD2.
i have non T-Mobile HD2, means i have 512 ROM (flash) based HD2, can i have android on it? i tried a lot but screen fades out and android wont boot. Do i need any update or what?
please help
its getting hot, im feeling alot of flaming about to happen newb, just use the search button or heres a link and [email protected]!!!!!!
http://forum.xda-developers.com/showthread.php?t=734335
Did you really try to install android on your internal memory?
If yes, please search for the next corner and shame on you..
your internal memory (the 512 mb) is called NAND. This won't be touched by Android (well...just take this for granted).
You'll install android on your SD card.
Good luck!
Hey hey i was not saying that to install on ROM, i was asking that how can i run android (froyo) on my HD2 which have 512mb ROM.
means i dont have t-mobile version.
Otherwise i know i should keep the files in micro SD card and then run it.
When i try to run on my HD2 screen fades out and nothings come back. i need to pull my battery out to restart my phone.
meltedmoon said:
Hey hey i was not saying that to install on ROM, i was asking that how can i run android (froyo) on my HD2 which have 512mb ROM.
means i dont have t-mobile version.
Otherwise i know i should keep the files in micro SD card and then run it.
When i try to run on my HD2 screen fades out and nothings come back. i need to pull my battery out to restart my phone.
Click to expand...
Click to collapse
At first, what radio do you use?
bro my radio is 2.06.51.07
other info
os: 5.2.21869 (21869.5.0.82)
manila: 2.5.19211619.0
ROM: 1.66.405.2 (76641) WWE
radio: 2.06.51.07
protocol: 15.30.50.07U
seriously mate, read this
http://forum.xda-developers.com/showthread.php?t=734335
and don't come back untill you understand all of it!
ok, a hint: radio version must be 2.08 or higher. I suggest the 2.14, but you need to read the linked thread first.
ok bro i read it and now able to run android.
But i am having some problems, i installed chucky ROM and then ran 4 types of android ROMs. 2 of them dont work good. but 2 works.
the 1 which ran the best still having problems in it. wifi wont work, camera wont work, flash light wont work. Some times it hang and stand still, i need to remove the battery to restart it. what i do?
which android version is best for chucky ROM?
i will be thankfull bye.
meltedmoon said:
ok bro i read it and now able to run android.
But i am having some problems, i installed chucky ROM and then ran 4 types of android ROMs. 2 of them dont work good. but 2 works.
the 1 which ran the best still having problems in it. wifi wont work, camera wont work, flash light wont work. Some times it hang and stand still, i need to remove the battery to restart it. what i do?
which android version is best for chucky ROM?
i will be thankfull bye.
Click to expand...
Click to collapse
it depends on each persons liking.. but since you're just starting to port to android.. i would recommend these combo, as i think both these works right out of the box as they say.. very fast build.. after you try these combination, you can explore with other builds.. but this would be a great start.. try it
VBNRom (Winmo ROM) i know you said you already have chucky ROM, but this one is light and gives me good compatibility..
NexusHD2 (Android) everything works.. BT, camera, internet (only RMNET) and very fast build..
I use chucky myself, and Darkstone's Desire Froyo. Everything works, and I havent noticed any slowdowns so far.
Its a genuine lovestory, really
Sent from my HTC HD2 (Running Android) using XDA App
all windows phone 7 htc phones have 512 mb rom , and i think wp7 consumes more space than android as it has allot of animations and eye candy items

[Q] T-Mobile US HD2 rom help needed

Hi guys im new to this phone
im coming from Android background and planning to use android as well in my T-Mobile US HD2 as the main OS most probably im not going to use Win Mob 6.5
Here are the details of my phone
OS Version 5.2.21913 (21913.5.0.94)
Manila Version 2.5.20181424.0
ROM Version 3.14.531.1 (04666) WWE
ROM Date 09/29/10
Radio Version 2.15.50.14
Protocol Version 15.42.50.11U
So what is the suitable androim rom for this phone and
what are the things i need to update before running Android
Im planning to use Android 2.2 with Sense UI (Desire HD rom probably)
and I do have a 4GB Class 4 Kingston memory card as well
guys help me out installing android on this phone
just a suggestion, start with a non HD builds like mdj 1.7. It works well for me.
also, might want to try bare wm you have HSPL.
jose makalolot said:
just a suggestion, start with a non HD builds like mdj 1.7. It works well for me.
also, might want to try bare wm you have HSPL.
Click to expand...
Click to collapse
how about this rom http://forum.xda-developers.com/showthread.php?t=859817
I have this HSPL 2.08.HSPL.
and above mentioned radios and rom do i have to anythn before running android?
agarp said:
how about this rom http://forum.xda-developers.com/showthread.php?t=859817
I have this HSPL 2.08.HSPL.
and above mentioned radios and rom do i have to anythn before running android?
Click to expand...
Click to collapse
if you want to go directly to desire HD builds then that is your prerogative, but don't whine if ever it lags.
You have HSPL with stock rom? May I know the link of the particular winmo rom you used?
jose makalolot said:
if you want to go directly to desire HD builds then that is your prerogative, but don't whine if ever it lags.
You have HSPL with stock rom? May I know the link of the particular winmo rom you used?
Click to expand...
Click to collapse
i bought it from another guy and im using the one came with the phone so i dont have any links
i tried tht build and its not tht usable at the moment so cant you suggest me a very good stable rom also i need normal speed n good battery life and of course with Sense UI
agarp said:
i bought it from another guy and im using the one came with the phone so i dont have any links
i tried tht build and its not tht usable at the moment so cant you suggest me a very good stable rom also i need normal speed n good battery life and of course with Sense UI
Click to expand...
Click to collapse
The following WM6.5 and Droid Builds work really well for me, just make sure you re-format the sd card on the WM rom and also change the screen time-out to 'never' before booting from the droid folder. The ROM and Build links are below:
WINMO ROM:
http://htcpedia.com/kwbr_HD2_com3/so...om.html?page=1
DROID BUILD:
http://forum.xda-developers.com/showthread.php?t=793924
Hope you find it as good as I have, just make sure to HSPL before-hand, this is the Nexus One droid build and i've only had one small problem with hearing people on calls, but that fixed itself after a couple of uses. The build is very stable and reliable and also battery life is good (No outstanding BUILD is the best for battery as it really depends on the RADIO you use) .
norodaigh said:
The following WM6.5 and Droid Builds work really well for me, just make sure you re-format the sd card on the WM rom and also change the screen time-out to 'never' before booting from the droid folder. The ROM and Build links are below:
WINMO ROM:
http://htcpedia.com/kwbr_HD2_com3/so...om.html?page=1
DROID BUILD:
http://forum.xda-developers.com/showthread.php?t=793924
Hope you find it as good as I have, just make sure to HSPL before-hand, this is the Nexus One droid build and i've only had one small problem with hearing people on calls, but that fixed itself after a couple of uses. The build is very stable and reliable and also battery life is good (No outstanding BUILD is the best for battery as it really depends on the RADIO you use) .
Click to expand...
Click to collapse
Thnxx alot for ur info
so i started using MDJ FroYo Sense Clean v. 2.4
and i think it works well but with battery drain issues.
Also btw is there any real benefit installing that Win Mob rom cz im planning to use only Android
agarp said:
Thnxx alot for ur info
so i started using MDJ FroYo Sense Clean v. 2.4
and i think it works well but with battery drain issues.
Also btw is there any real benefit installing that Win Mob rom cz im planning to use only Android
Click to expand...
Click to collapse
Even though your going to be using droid all the time anytime you switch off the device, without a bootload option between WM and DROID you will always need a WM ROM to use as a platform to boot droid.
The ROM i use is a very low-key ROM and dosnt take up that much memory.
Plus the RADIO is what ultimately makes the good data connections and battery power etc so you will need both.
The way I have my build the droid battery drain issue is minimum (in my experience) to other builds, its stable, fast and it works well. Just make sure to install LauncherPro once you boot er up.
Just remember though if you restart your phone for any reason it will go back to the WM ROM on boot-up unless you have a BOOTLOADER installed so you can choose between either.
Hope this helps
norodaigh said:
Even though your going to be using droid all the time anytime you switch off the device, without a bootload option between WM and DROID you will always need a WM ROM to use as a platform to boot droid.
The ROM i use is a very low-key ROM and dosnt take up that much memory.
Plus the RADIO is what ultimately makes the good data connections and battery power etc so you will need both.
The way I have my build the droid battery drain issue is minimum (in my experience) to other builds, its stable, fast and it works well. Just make sure to install LauncherPro once you boot er up.
Just remember though if you restart your phone for any reason it will go back to the WM ROM on boot-up unless you have a BOOTLOADER installed so you can choose between either.
Hope this helps
Click to expand...
Click to collapse
im planning to stick with android sense rom wat u hv mentioned is tht no sense rom ryt
ill try to install the low memory n process using win mob 6.5 rom
wat u hv is the international hd2 rom ryt will it work with t-mobile US hd2 device

Android installation help.PLEASEEE!

Hey guys, im not really big on technology , but for the last 5 hours i have been trying to get android on my HTC HD2. I have ROM 3.14 and Radio version 2.15. but my SPL is 2.10. If correct i believe I need SPL 3.03? I have no idea as to how to do that. Im new on this site so please forgive me if this post has already been done. Much help would be appreciated.
Do you want NAND or SD Android?
Im sorry , but i dont know the difference . I think i have been trying to get the SD android.
In that case, you have everything you need. Forget about HSPL. That's only needed if you need to change radio, and you don't.
Just follow the instructions on how to install the Android build that you have downloaded and you'll be up and running.
Android on SD is pretty straight forward - it's just copy, paste and run - so you shouldn't have any problems.
Thank you very much sir. I really appreciate the help.
Jerseykid101 said:
Thank you very much sir. I really appreciate the help.
Click to expand...
Click to collapse
No problem mate. Glad to help
Jerseykid101 said:
Hey guys, im not really big on technology , but for the last 5 hours i have been trying to get android on my HTC HD2. I have ROM 3.14 and Radio version 2.15. but my SPL is 2.10. If correct i believe I need SPL 3.03? I have no idea as to how to do that. Im new on this site so please forgive me if this post has already been done. Much help would be appreciated.
Click to expand...
Click to collapse
If you like you can follow the link in my signature which gives you step by step instructions
enjoy
use youtube also
the video on youtube....KVoCi0qkrBg will actually show you how to do everything!!! with links to this site and where to get what from this site and how to install/setup... i was really confused before watching this video and it helped alot... also in the description of this video you will get all the steps and links...
also...
since i dont think i am able to put outside links in my post i put the description of the video like that for you... but if you couldn't find it try this, the full name of the video is " How to install HSPL ,RADIO,ROM,ANDROID on HTC HD2 " by (mlkjuggalo).
good luck
MDJ's CyanogenMod 7 v. 2.6 [A2SD+][GRH78C][RMNET][Kernel: MDJ S10.4 OC
hi please some one help me i am trying to install MDJ's cyanogenmod 7 on my htc hd2 T(mous) when i tried to update Magldr rom but it is not going through it just got struch on updating window it did not even update 1% i think the reason behind it might be my rom being much updated version when compared to what i saw magldr my software details OS version 5.2.21913(21913.5.0.94) ROM 3.14.531.1 (04666) wwe RADIO V- 2.15.50.14, when i tried to update MAGLDR window showed me rom image 2.000000 sometlike thing like this plz suggest me some thing and give the detailed step by step i am new to android buils i am running froyo v1.8 sd version for almost months but its draining my battery in 5 to 6 hrs plz help me out with this i wanna get cyanogenmod 7 badly. thx
i appreciate ur builds and services.

[Q] Is there any gingerbird android issue on hd2?

hi friends
i am planning to install gingerbird version of android on my hd2..i wanna make sure is there any problem before or after install gingerbird on hd2...also i want before installing the android rto know whether
right now i am using android rom should we run task29 n erase all phone date or just like tht we can install i mean overwrite on the previous rom?
what radio version does it support?
htc hd2
cleanEX custom rom
radio version:2.12.50.02_2
yes..a lot . but it varies
vishbad said:
hi friends
i am planning to install gingerbird version of android on my hd2..i wanna make sure is there any problem before or after install gingerbird on hd2...also i want before installing the android rto know whether
right now i am using android rom should we run task29 n erase all phone date or just like tht we can install i mean overwrite on the previous rom?
what radio version does it support?
htc hd2
cleanEX custom rom
radio version:2.12.50.02_2
Click to expand...
Click to collapse
It's always advisable to run Task29 before flashing a different type of ROM as it helps 2 ensure no remnants of the previous ROM remains 2 cause possible conflicts.....
Nw abt Gingerbread....Its way far 4rom perfect and so u should (actually "must" better defines it) expect issues from it...Check 4rom thread to thread for a build with lesser issues, then flash it 2 see if it matches ur taste...if it doesn't? u can always try another...
I suggest that you try a SD build of Gingerbread first.
That way, you don't need to flash your ROM, and it will leave your WM 6.5 ROM intact. The second advantage is that you will see if it fits your expectations.
But be aware that no build is perfect, and it is known that many apps are not compatible with Gingerbread yet.
I am currently using the build from this thread
http://forum.xda-developers.com/showthread.php?t=957652
and it is working really well.
Gingerbread
All in all I think Gingerbread, is quite stable, try MDJ's cyanogenmod7 that seems to work quite nicely

android nand rom someone Suggestions for a good one?

i need to install a NON ICS nand android rom
what rom do you recommend?
or what rom do tou use?
i have a T-mobile phone
2.08.HSPL
2.15.50.14
thanks
those 2.3.xx version are very mush stable nowadays, if you have magldr you can try out the SD ROM version first & see what fits your needs
ones i've used/ tried
http://forum.xda-developers.com/showthread.php?t=1356362
http://forum.xda-developers.com/showthread.php?t=1058809
http://forum.xda-developers.com/showthread.php?t=1220151
http://forum.xda-developers.com/showthread.php?t=1256423
mengfei said:
those 2.3.xx version are very mush stable nowadays, if you have magldr you can try out the SD ROM version first & see what fits your needs
ones i've used/ tried
http://forum.xda-developers.com/showthread.php?t=1356362
http://forum.xda-developers.com/showthread.php?t=1058809
http://forum.xda-developers.com/showthread.php?t=1220151
http://forum.xda-developers.com/showthread.php?t=1256423
Click to expand...
Click to collapse
thanks but i found a faw good stable roms and it didnt helpd my problem
my GPS fix and disconnect and he get fixed only whan im not moving
i think i wll send him for riper

Categories

Resources