Phone never sleeps - HD2 General

Help me please.
Until today everything was fine, than, I can't put the phone to sleep.
When I press the end key it comes black and after 1 second turns on again at the lockscreen. I can't put it into sleep mode with the screen off.
Neither in battery or plugged in charger.
I dis a hard reset, installed new ROM (Artemis) and new radio but nothing can solve the problem.
Do someone know what's happening ?
Sorry about my english.
Thank you all.

Additional information
When i conect and disconect the power cable it returns to normal, everything ok until next boot. If i reboot, the problems begins again.

Probably the last option but a hard reset will likely cure it.

airwater9 said:
Probably the last option but a hard reset will likely cure it.
Click to expand...
Click to collapse
you need to open your eyes and read.

duque.walter said:
Help me please.
Until today everything was fine, than, I can't put the phone to sleep.
When I press the end key it comes black and after 1 second turns on again at the lockscreen. I can't put it into sleep mode with the screen off.
Neither in battery or plugged in charger.
I dis a hard reset, installed new ROM (Artemis) and new radio but nothing can solve the problem.
Do someone know what's happening ?
Sorry about my english.
Thank you all.
Click to expand...
Click to collapse
do you install any apps after the hard reset? of so which?

Try this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

No, after the hard reset nothing was installed.
The problem still exists even when I remove the sim and the SD.
But when I conect the power cabe (for a second) evererything is back to normal.

sounds like a hardware problem then.

M_T_M said:
Try this
Click to expand...
Click to collapse
hahahahha

i agree, its most likely a hardware problem

hi i had the same what i did i just change the song and come back as it was...

what do you mean by changed the song?

Related

NEED HELP - Screen becoming all white

my Dopod 818 Pro - Flashed with WM6 - touch XI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i played my phone, and accidentally let it runs the battery till only left 7%, and keeps on restart, Auto-restart.
after around 10 minutes....it becoming white out....
5minutes b4, it prompt up to ask for sim password, then within minutes, becoming white colour...with unknown LINE...
there are several ways:
1. pull out the batery n left for 10mins+- then fully charge it and turn in on.
2. switch off ur device and on it back n press the red end call button
continuously.
hope will help
tq
uk19xx said:
there are several ways:
1. pull out the batery n left for 10mins+- then fully charge it and turn in on.
2. switch off ur device and on it back n press the red end call button
continuously.
hope will help
tq
Click to expand...
Click to collapse
thanks for reply....but still cannot....Malaysia where can help to flash my phone?....or any expert can help...i go normal shop...they will tell me LCD spoil....but i dont believe so..
I have got the same `
my one is o2 xda
i have tried many ways`` but is still so`
i buy a lcd from taobao.com
it costs 200 yuan
\
hope that my 830 can live```
Dopod screen goes all white
evangelism said:
thanks for reply....but still cannot....Malaysia where can help to flash my phone?....or any expert can help...i go normal shop...they will tell me LCD spoil....but i dont believe so..
Click to expand...
Click to collapse
My dopod also got same problem, I thought it caused by software failure then I tried to re-install RUU packet, hard reset it then when it installing customization, it went to all white again. Now it works for receive call ONLY!!.
I tried to remove the battery and recharge it and pressed red end call button continously, it is still remain white.
Could anyone suggest, when we should press the red end button and for how long?
Or, anyone else could suggest other solutions please?
very many thanks,
toenoes
Screen problem solved
uk19xx said:
there are several ways:
1. pull out the batery n left for 10mins+- then fully charge it and turn in on.
2. switch off ur device and on it back n press the red end call button
continuously.
hope will help
tq
Click to expand...
Click to collapse
Thanks for your solution uk19xx, my dopod "white screen" is solved just now. I did use the second method but after 5 minutes pressing red end call button then I turned it off. Turn it on again and it works.
cheers,
toenoes

9100 3G bricked, or something worse?

Hi, I'm a Newbie as You can see I will try to describe my problem. I have a qtek 9100, and I (being so dummy) flashed a wrong hard spl from another phone, (I don't know, from what phone, I just surfed google) and now the phone doesn't do anything, I tried to cold reset it but it didn't worked, I tried to push all the buttons and power it on, that didn't worked too can You suggest me something? its a 3G model, if You need more info, just ask, I will try to answer
could Anybody Help me?
Please
...heh....
Please provide more info about your phone. What's the exact model. If you look under the battery of your phone you can see the model.
I think that you mistaken something. There is not any 9100 3G model. At your phone is there a second camera?-
sorry I mixed up sthg.
it's a T-Mobile phone, it was CID-Unlocked, and i don't know exactly, but under the battery it's written that it's wiza200
Take a look at this guide & follow the steps one by one. I hope that this will work.
If this don't work & you are sure your device is CID unlocked you can try flashing T-mobile 2.26 (with a little search you will find it ).
T-mobile have saved my a-s a lot of times .-
sorry, but that didn't helped for me.
the phone is not responding to anything, it is like a brick
when i press the camera button and the on/off button, nothing happens, no boot loader screen at all
juliushas said:
sorry, but that didn't helped for me.
the phone is not responding to anything, it is like a brick
when i press the camera button and the on/off button, nothing happens, no boot loader screen at all
Click to expand...
Click to collapse
Are you sure your battery is not completely dead? Do you have the original 1.0A charger?
Yes, I'm sure about the Battery
I Don't have the original charger, but I test the Battery with another phone, and it works fine..
I flashed a Wrong SPL.. isn't that the problem? and I don't know how to bring it back
I don't have time to search it but you can search for ''jump start'' or ''kick start''. It is a way to start your Wizard with a similar problem as yours. Simply you connect a 9v or 12v (I don't remember) to your battery & then you put it in your phone & it starts.
As you can see I can't remember exactly what you must do. Search it. The exact instructions are in the forum .-
Sorry, That didn't worked for me too.
The phone is Dead..
and I need to Bring It Back to Life..
You still haven't provided enough specifics about what happened and is happening to your device. Do any lights come on? What specific rom did you flash it with? You are going to have to search through the past discussions. Don't lose heart - others have gone through a similar ordeal.
Well, at least you can still sell it for parts...
I'm sorry to hear about your mistake, but that's why there are so many warnings to read and read more before flashing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So that's it?
It's a brick?
The light does shine, but just after many random pushes of on/off button, reset and camera button. sometimes ir shines for a long time, and sometimes for just a second.
and i don't remember which rom did I flashed..
it was a long time ago..
H-Jtag wouldn't help?

[NST] Unresponsive when unplugged from Power Source

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had my rooted Nook Simple Touch froze on me.
Series of events:
1) I thought it needed to be charged
-So I charged it
-Still Frozen but would restart when I plugged it back in
2) I thought the root had cause something so I reformatted it using: http://forum.xda-developers.com/showthread.php?t=1289233
-Still Frozen when unplugged and restart on being replugged in
3) Reformatted again for good measure then rooted using: http://forum.xda-developers.com/showthread.php?t=1343143
-Still frozen
4) Called B&N tech Support: No help, cycle nook, turn off, cycle nook, turn off, no change, said to let it power down to 20% and that you should only charge for 3-4 hours and that you can over charge the unit??????, thanks anyways.
5) Used Ifixit.com teardown to see if there was something going on inside: http://www.ifixit.com/Teardown/Nook+Simple+Touch+with+GlowLight+Teardown/9301/1
-Took off back, upplugged battery
-Found nothing loose or broken inside
-Found a port for a cell antenna, interesting
-Unplugged the screen from the motherboard
-Put it back together
-TADA!! it works again. I think that hard resetting the battery did the trick but also voided any warranty I had. (which was none since it is over 1 year old.
I searched for a resolution to this problem everywhere and could not find one so I am putting one here. Thank you for your time.
Sorry you didn't see this, and I'm glad to see the fix being bumped - this was the thread with the fix before you needed to do the work -- but congrats on a successful self-repair and clear documentation.
http://forum.xda-developers.com/showthread.php?t=1813384
roustabout said:
Sorry you didn't see this, and I'm glad to see the fix being bumped - this was the thread with the fix before you needed to do the work -- but congrats on a successful self-repair and clear documentation.
http://forum.xda-developers.com/showthread.php?t=1813384
Click to expand...
Click to collapse
Damn, I never thought to search dead. Thanks, now I know it is not just me.
Voiding Warranties since 1981

S7 Edge freeze/crash

Hi everyone.
I am having a big problem with my phone, and since I messed up my warranty by rooting my phone, I am gonna try to find help here, and I really hope someone knows how to fix this issue.
So I got my S7 Edge this summer straight out of the box and it was working perfect. A couple of months after that it started freezing and restarting once every week or so, but I didnt think much of it. Slowly it was doing that more and more, until the point where the screen would freeze and the phone would restart 5 times a day. Shortly after it got stuck in a bootloop. I went to the store I bought it from but since a had a small scratch on the screen they wouldnt repair it without me paying for the screen change. Since it was a lot of money I tried to repair my phone at home by rooting my phone and installing a stock firmware. That didnt work so I installed a custom rom, that worked for a day but then it got back in the bootloop. Now I cant even be in TWRP without it freezing and restarting. My question to you guys is, has anyone had this issue (I hope not because its the worst) and is there any chance I could fix this myself?
I found this picture on google that resembles how my phone looks when it freezes/crashes. It gets these small pixel on the screen, not on the whole screen like in this picture, just on parts of the screen and on different parts everytime.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have exactly the same problem. I think is somehow power related. Happens more frequently when phone is plugged in or when there's an increase in power consumption...
Is there a fix for it? I am having the same problem.
I found out that is the EMMC and the only fix is motherboard replacement... SAD
lookfor said:
I found out that is the EMMC and the only fix is motherboard replacement... SAD
Click to expand...
Click to collapse
I guess you are right since the crashes were more frequent when I had a memory card in the slot. I thought that maybe my memory card was incompatible. But the eMMC seems to be the problem

Nexus 6p had an unexpected short swim in the sea... trying to revive it :(

Hi all!
I'm writing here with deep hope that someone can help me somehow...
I got my 6p popped in the sea a month ago just as far s the camera glass goes. I've turned it off immediately, but because I was in a small place, didn't manage to find some phone shop or any way to open it and dismantle the battery. I did try to turned it on (stupid me) later on that day and after that left if for 2 days to dry.
My hopes rose when it did give some kind of a "life signal" when on charger but that's as far as I got...
So, when I put it on charger I get the Battery animation icon with 50% showing on the bottom, after few secs it shows 0%. Also, while on charger it just bootloops... can't get pass the Android boot animation, it just restarts. However, I can get to recovery (TWRP) and browse through it (make backups etc) while on charger it doesn't restart. The thing is that it only works with wall charger, I can't get to recovery when connected to computer via USB (so I can't even get that backup or transfer files from the phone ).
I've went to two phone repair shops in my town, but both said that it's dead. The thing is I'm not sure that they even tried with new battery, because this is a rare phone in my country and they probably don't even have one to try...
Anyway, I've ordered new battery, but I'm afraid if that'll help... I would like, at least to connect it somehow to my computer and try to transfer files and maybe do some factory resting or loading an image...
I have some pics from one of the repair shops, so I hope someone could help me determine if there is any help with it?
Thanks in advance!!!
Cheers,
Djape
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS: Sorry for the large images, but I thought the details are needed
It's far too corroded.. it's dead, Jim.
djapeman said:
I'm writing here with deep hope that someone can help me somehow...
Click to expand...
Click to collapse
Seriously? This is an absolute waste of time and money. Bin.

Categories

Resources