Universal FRF91 OTA Update:
http://android.clients.google.com/packages/passion/signed-passion-ota-43546.cc653ee4.zip
FRF85B to FRF91 Build:
http://android.clients.google.com/packages/passion/signed-passion-FRF91-from-FRF85B.db99fdf1.zip
(Alternatively, you may also do a *#*#CHECKIN#*#* in order to get to FRF91 once you are on FRF85B)
Also, for anyone looking to get to FRF85B from an older build (GSM or AWS):
http://www.megaupload.com/?d=WMCZIIIB
ERE27 to FRF91:
http://android.clients.google.com/packages/passion/signed-passion-FRF91-from-ERE27.e410116a.zip
ERE36B to FRF91:
http://android.clients.google.com/packages/passion/signed-passion-ota-43546.cc653ee4.zip
FRF50 to FRF91:
http://android.clients.google.com/packages/passion/signed-passion-FRF91-from-FRF50.836691a1.zip
EPF21B to FRF91
http://android.clients.google.com/p...R_FRF91-1.13.1700.1_EPF21B_release_signed.zip
Instructions:
1. Download the update from one of the links above.
2. Rename the file to update.zip. Note that if you're using Windows, just rename it to "update" (no quotes, of course) because it's already a zipped file.
3. Copy the update.zip file onto your microSD card.
4. With your Nexus One off, hold down the trackball and press the power button.
5. You'll be booted into a white screen with three Android robots on skateboards. Select "Bootloader."
6. On the next screen, select "Recovery."
7. Your phone will reboot, giving you a picture of the Android robot and an exclamation point inside a triangle.
8. Now press the power button and volume up button at the same time. It could take a couple of tries.
9. Now (using the trackball this time) choose "Apply sdcard:update.zip" and let things run their course.
(Note: Before doing step 9 you can also run the "Wipe Cache Partition" option. This has been known to help with the soft key accuracy on the nexus one (optional. This causes no data loss.)
*************************************
By Popular Demand (Credit to lox):
Update.zip to flash with custom recovery
This is the totally stock FRF91 repacked as update.zip. The radio hasn't changed since FRF50, so if you are using it, you can keep it and install the noradio version.
Download:
- without radio image: multiupload (md5sum: 041b1e21433e636340ca6b56f141a315)
Root
To root FRF91, just flash this update.zip (contains busybox, superuser.apk, su, unsecured boot.img) (md5sum: c6c27598c210576792d6d56738a2edde)
just saw this on the google forum and was going to post. Great job! Now excuse me while I update
texas-saluki said:
just saw this on the google forum and was going to post. Great job! Now excuse me while I update
Click to expand...
Click to collapse
Haha! Ya the news is spreading like wild fire
Lets see if we can crash google's servers lol.
are we going to see newer froyo updates after this one?
Just updated from Stock 2.1 on AT&T. Thank you!
Its for real this time. My phone is updating as I type. I cant wait...
So while waiting for my 5 minute between post restriction to expire ive seen the phone boot and noticed a few things. The power control widget takes a while to load. You have to re-authenticate to facebook and my Exchange calendar was automatically added.
Downloaded the file from Google's servers and shall be applying as soon as my classwork done.
Just signed up to say...
THANK YOU!!!
I have been patiently waiting for Froyo while seeing my friend who works for Google just happily loving Froyo alone.
Anyway, thank you thank you thank you!
i can definitely confirm that this works. thanks!
arcticreaver said:
are we going to see newer froyo updates after this one?
Click to expand...
Click to collapse
my understanding is that this is the final froyo build that is going out ota. People are receiving the update in waves so this should be official.
So I'm on ATT nexus and rooted and running the latest r19. Is this the final version that both t-mobile and ATT versions will get? Or is this a second version only for ATT phones?
Should I upgrade to this if I'm rooted already?
FINALLY. Thanks a bunch
My Nexus is updating right now
Glad I'm the first to have problems...
Stock N1 at&t bands, when I apply the update per the steps in the OP, I get
Finding update package...
Opening update package...
Verifying update package...
E:failed to open /sdcard/update.zip (no such file or directory)
E:signature verification failed
Installation aborted.
I've tried it 3 times, reformatted the sdcard so the update.zip was the only thing on it, down loaded the file twice...I'm lost.
Signed,
At the mercy of the XDA Gods!
Sorry for this question, but...
If I update my Nexus AT&T with this rom, will it avoid its warranty? Is it the official update provided by Google?
Thanks a lot.
davidusr said:
Glad I'm the first to have problems...
Stock N1 at&t bands, when I apply the update per the steps in the OP, I get
Finding update package...
Opening update package...
Verifying update package...
E:failed to open /sdcard/update.zip (no such file or directory)
E:signature verification failed
Installation aborted.
I've tried it 3 times, reformatted the sdcard so the update.zip was the only thing on it, down loaded the file twice...I'm lost.
Signed,
At the mercy of the XDA Gods!
Click to expand...
Click to collapse
I have the same issue.
make sure the file is not update.zip.zip
sifuhall said:
I have the same issue.
Click to expand...
Click to collapse
I had that problem as well. I tried twice.
http://www.engadget.com/2010/06/28/...85-hitting-atandt-nexus-one-owners-ota-right/
Go there. Notice how there's an "update", "update 2" and "update 3"? Try downloading the link from "update 3". Of course you wanna make sure you rename it "update.zip". Transfer it to your sdcard and then try again.
Also, for those who do not know how to update manually:
Rename the downloaed file to update.zip
Put it at the root of your SD-Card and then turn off the phone.
Hold down the volume button and then press the power on button, it should go into a boot screen. Wait for a few seconds for it to load up proper and then select "Recovery" with the volume down/up button and press the power button.
Once you see an android holding a sign with an exclamation mark push volume down+ volume up + power button _at the same time_.
Select "apply sdcard:update.zip"(or something similiar) with the trackball and press it.
After the update is finished select "reboot system now" with the trackball and press it.
Click to expand...
Click to collapse
luffyz said:
make sure the file is not update.zip.zip
Click to expand...
Click to collapse
Thats what it was. Came back to let the other guy know, but ya beat me to it.
Rename it to "update" with out the .zip. Worked for me.
Thanks!
Still not work for me. Already rename to update; but is still saying E:signature verification failed !!!
Worked for me!
Getting root without unlocking the bootloader worked after updating to FRF85B too!
Related
Nexus One Solution"failed to verify whole-file signature"when updating to gingerbread
Important Notice :
Do this at YOUR OWN RISK, I don't give any guaranty if something happened to your phone , also store all of your data and memorize all of your previous apps
Hi Guys,
I had this problem and it made me mad cause i was so exited to run gingerbread on my Nexus one(THIS SOLUTION WORKS FOR UNROOTED DEVICES)
PLEASE BACKUP FIRST CAUSE NOT ALL THE DATA WILL BE RESTORED USING YOUR GOOGLE ACCOUNT .... SO PLZ BACKUP BEFORE DOING ANY STEPS
The solution of this problem is long but it is worth it and it is totally safe:
"Through the steps to know the current version you are at : just go to settings ===> about phone "
First Step:
You will have to go to the stock rom(without any google updates) using passimg.zip
Code:
Android Version: 2.2
Baseband Version: 32.41.00.32U_5.08.00.04
Kernel Version: 2.6.32.9-27237-gbe746fb
[email protected] #1
Build Number: FRG33
After You finish this step the mobile is like the new one from the factory, It will ask you to provide the gmail account but don't do it this time just skip it , you will enter it once at last when gingerbread is on your device
Second Step:
after that you will update (using update.zip method) using the second link rename the file 656099b119f8.signed-passion-ota-102588.656099b1.zip to update.zip (thanks to efrant)
After the gingerbread update , it is recommend to do a factory reset : setting ==> Privacy ==> Factory Reset
When the device restarts just enter your google account and all your apps should be restored ( you will find a notification telling you x applications restored )
Et Voila it is done
Code:
Android Version: 2.3.3
Baseband Version: 32.41.00.32U_5.08.00.04
Kernel Version: 2.6.35.7-59423-g08607d74
[email protected] #1
Build Number: GRI40
ADDITIONAL information for people who don't know to use passim.zip and update.zip
1-passimg.zip
a-Download the Passion_Google_WWE_2.16.1700.1_FRG33_MFG_Shipment_ROM.z
ip link ( 1st link)
b-Rename the file to passimg.zip ( in windows take care of renaming it passimg.zip.zip)
c-copy it into the root of your SD card
d-turn of your phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f- the phone will automatically read the passimg.zip ( will load and then check it) after it is check it will ask you to press volume up to confirm the updates
g-the device will reboot then go to the SD card and DELETE THE PASSIMG.IMG file
then it is done
2-update.zip
a- download the corresponding update file from the steps above
b- rename the file to update.zip( again in windows take care of the update.zip.zip rename problem)
c- copy the file to the root of your SD card
d- turn off the phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f-wait for 4 sec. the using the volume down and up buttons to go up and down go the RECOVERY and then press the power button to select
g-it will load the nexus logo then will show the android buddy with an exclamation mark .... press power button + volume up button
h-choose using the trackball the apply SD card:update.zip option
the phone will go through some process verifying package... verifying software version and the end the phone will restart to finish the update ( Notice: in some updates it doesn't restart automatically so just choose the "reboot system now" option)
i- AFTER THE PHONE RESTART ALWAYS REMEMBER TO DELETE THE OLD UPDATE.ZIP FILE TO PUT THE NEW ONE FOR THE NEXT UPDATE according to the above steps
Hope this post is helpful for some people and if there is any missing steps or mistakes i would like if someone help me with an advice
Download links:(only the link of the stock rom i had to upload it cause it isn't available anymore on the google servers)
-stock ROM "FRG33"==> http://www.multiupload.com/NTA9DANZGC
-from FRG33 to GRI40 ==> http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip (thanks to efrant)
-Update FRG33 to FRG83 ==>http://android.clients.google.com/p...01ae02c.signed-passion-ota-60505.766a101a.zip
-Update FRG83 to FRG83D ==> http://android.clients.google.com/p...signed-passion-FRG83D-from-FRG83.ecb21b75.zip
-Update FRG83D to FRG83G ==> http://android.clients.google.com/p...igned-passion-FRG83G-from-FRG83D.2854b06b.zip
-Update FRG83G to GRI40 ==>http://android.clients.google.com/p...signed-passion-GRI40-from-FRG83G.81304b2d.zip
Your "second step", parts 1, 2, 3, 4 can be simplified into one step. This file: http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip updates FRG33 to GRI40, and it is also mentioned in the sticky...
1.f- the phone will automatically read the passimg.zip ( will load and then check it) after it is check it will ask you to press volume up to confirm the updates
Click to expand...
Click to collapse
no question here, tried it twice and waited 5 min!
FRG83D Vodafone NL
Root Nexus One 2.3.3 without unlock the Boatloader
Please can you explain to us step by step how to root Nexus One with Gingerbread 2.3.3 installed?
I rooted my phone using Superoneclick 1.65 before before the the Gingerbread update and I was happt using the MIUI roms but I have unroot to install 2.3.3, I didn't like it and wanted to go back to MIUI again but Superoneclick doesn't work anymore...please help
PlaagGeest said:
no question here, tried it twice and waited 5 min!
FRG83D Vodafone NL
Click to expand...
Click to collapse
I have the same issue on Nexus One with FRG83D
Try with this file...
http://db.tt/1Swvw7Z
Just put it on your sd (not in any folder), and boot into the bootloader...
Sent from my Nexus One using XDA App
PlaagGeest said:
no question here, tried it twice and waited 5 min!
FRG83D Vodafone NL
Click to expand...
Click to collapse
webceo said:
I have the same issue on Nexus One with FRG83D
Click to expand...
Click to collapse
what exactly happened??
does it show ( " checking passimg.zip")
you should download the first link ... then rename the file to passimg.zip
turn off the device and open it using vol down + power button
and leave it for a while in the Hboot menu it will automatically load the passimg.zip file ... you will see it checking and loading it ... after that you will get the question about do u want to update? then you will press the vol up button
zmalach said:
Root Nexus One 2.3.3 without unlock the Boatloader
Please can you explain to us step by step how to root Nexus One with Gingerbread 2.3.3 installed?
I rooted my phone using Superoneclick 1.65 before before the the Gingerbread update and I was happt using the MIUI roms but I have unroot to install 2.3.3, I didn't like it and wanted to go back to MIUI again but Superoneclick doesn't work anymore...please help
Click to expand...
Click to collapse
I haven't rooted it yet, i am using the unrooted till now
Once i will try i will post steps ... but i think one of the people ( who is more expert that me in android) will post it first
I recommend you to check for couple of day
newhere said:
what exactly happened??
does it show ( " checking passimg.zip")
you should download the first link ... then rename the file to passimg.zip
turn off the device and open it using vol down + power button
and leave it for a while in the Hboot menu it will automatically load the passimg.zip file ... you will see it checking and loading it ... after that you will get the question about do u want to update? then you will press the vol up button
Click to expand...
Click to collapse
Yes, did put it in my sd root.
It will load automaticaly, it checks it(with the loader bar on the right, then in a differrent screen it will load it. Then within 30 seconds i'm back at the first screen. And nothings happens.
@dangerrat is it the same version?
webceo said:
I have the same issue on Nexus One with FRG83D
Click to expand...
Click to collapse
I have same problem. In my opinion problem is with special kernel from Vodafone. See it: http://forum.xda-developers.com/showthread.php?t=933126
After many hours fighting with my N1 I give up and unlocked bootloader. After that I make update using fastboot without any problem. Now I have 2.3.3
The new Passimg did the trick!
Automatically updated the passimg.
Reboot
updated the update.zip.
Now running 2.3!
From branded dutch vodafone to 2.3!!
Many thnx!
ok seems that the link of the passimg isn't good
i will re-upload the file again and i will provide the new link
LOLz.
The file I uploaded was the same zip. I just renamed it to passimg.zip before uploading (because that seems to be a common failing point)... xD
Sent from my Nexus One using XDA App
danger-rat said:
LOLz.
The file I uploaded was the same zip. I just renamed it to passimg.zip before uploading (because that seems to be a common failing point)... xD
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
did u download it from the link that i have provided in the first post?
newhere said:
did u download it from the link that i have provided in the first post?
Click to expand...
Click to collapse
Kind of...
Your file is a zip within a zip, so I extracted first.
MD5 for the correct zip:
d90635c2d269c6a26f77ae1a681e5424
Sent from my Nexus One using XDA App
thx so much for this guide.... i deleted the stupid amazon mp3 app and keep getting error...
finally got gingerbread using the method above.. thx once again...
Zip in zip.. hmm didnt expected that, sorry!
It just doesn't work for me. I have used the new Passimg.zip. But then there is main version is older. Update fail!?
EBBR said:
It just doesn't work for me. I have used the new Passimg.zip. But then there is main version is older. Update fail!?
Click to expand...
Click to collapse
This happens to a few people, and there doesn't appear to be a fix, sorry!
Only option you have is to unlock the bootloader, or wait for a fix to be found...
Sent from my Nexus One using XDA App
danger-rat said:
This happens to a few people, and there doesn't appear to be a fix, sorry!
Only option you have is to unlock the bootloader, or wait for a fix to be found...
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
What I would like to know is what the common denominator is on all the phones that this does not work. From what I recall, it seems like most of the phones this does not work on are refirbs... wonder what is going on?
Anything YOU do to YOUR phone is not my fault, please proceed with caution
To apply:1. Download RSD Lite, Drivers, and .sbf files from below
2. Install RSD Lite
3. Open RSD Lite as administer (hold shift, right-click on RSD Lite, select Run as administer)
4. Unzip the .gz and extract the .sbf
5. In RSD Lite, browse for the .sbf and select it.
6. Power your phone into the bootloader (hold volume up and power on, should be a black screen with white text)
[If the bootloader screen says Cannot program, your battery is too low to apply .sbf]
7. Plug phone in and run the driver installer
8. RSD should recognize your phone now
9. Select you phone and press Start
10. Wait for it to finish
Whatever you do, do not unplug your phone from computer or disconnect them in any way
Note: If you bootloop and are stuck at the red M logo, you need to wipe data in stock recovery. To do that, hold the volume down button and continue holding it when you power up the phone. Then, once you see the triangle and android, press both volume buttons at the same time. After that, scroll down and select wipe data/factory reset.
Downloads:
2.2.1 SBF: http://www.multiupload.com/6J4DXMTP8Q
RSDLite v5.0: http://www.multiupload.com/I948480VBT
Motorola Driver Installer: http://www.multiupload.com/NWCE2ZXPMF
Root 2.2.1 with SuperOneClick (with psneuter or Gingerbreak) and enable non-market apps:
http://forum.xda-developers.com/showthread.php?t=803682
jorgonv said:
Found this by searching Motorola bravo 2.2 sbf on google:
[can't post links, sorry]
htt p://modmymobile.com/forums/629-motorola-bravo-general/561492-stock-sbf-file-bravo.html
Don't know if this is legit and wanted to see what others think
Click to expand...
Click to collapse
OMG! I use to be on modmymobile, but gave up on it. This is LEGENDARY!!
A 2.2 SBF!! You found it. You didn't give up on modmymobile. Great job.
BravoMotorola said:
OMG! I use to be on modmymobile, but gave up on it. This is LEGENDARY!!
A 2.2 SBF!! You found it. You didn't give up on modmymobile. Great job.
Click to expand...
Click to collapse
thank daywalker from modmymobile
is there any way to check if this is legit?
jorgonv said:
thank daywalker from modmymobile
is there any way to check if this is legit?
Click to expand...
Click to collapse
Flash it to your phone. Be the guinea pig
BravoMotorola said:
Flash it to your phone. Be the guinea pig
Click to expand...
Click to collapse
Is that the only way?
No worries, dont wreck your phone people. I have a perfect brick to test this on.
If it works I will have my recovery done this weekend. This is what I have been waiting for.
This had better work!
Just talked with bandroidx, he says it works.
Yep SBF is as good as gold. Fixed my brick, is latest 2.2 and had the code group i needed. Woot!
what do I do with the p4_kobe_umts_kobe_user_3.4.2-125_KOB_FFW-4_product-keys-ATT-US_ATT-signed.sbf.gz file?
laughsatyou said:
what do I do with the p4_kobe_umts_kobe_user_3.4.2-125_KOB_FFW-4_product-keys-ATT-US_ATT-signed.sbf.gz file?
Click to expand...
Click to collapse
Unzip th .gz file. The .sbf will be in there, if you dont know where to go from there, search how to apply an sbf
jorgonv said:
Unzip th .gz file. The .sbf will be in there, if you dont know where to go from there, search how to apply an sbf
Click to expand...
Click to collapse
yea, im installing it with rsd lite, seems to have worked. *crosses fingers*
woo, thx guys.
i have rsd lite and the sbf file but im completley new to this.so i just plug in my phone leave it on and apply the file? or do i put it in a bootloader? if so how?
Couldn't Update So I Used A Stock Froyo SBF and RSDLite 4.8
My Bravo was rooted. So, every time I tried to update it, I got the triangle/exclamation mark thing. There was probably a way around that, but I don't know enough about hacking phones.
Instead, I flashed (at least I think that it was a case of flashing some sort of ROM... I really don't know) a stock version of Android 2.2.1 onto my Bravo, and it worked like a charm.
Now I need to go about figuring out how to root it again, but that's a headache for another day...
I tried to post the link to the SBF download, but this forum wouldn't let me. So, you'll have to find it on your own.
ThaFrankinator said:
i have rsd lite and the sbf file but im completley new to this.so i just plug in my phone leave it on and apply the file? or do i put it in a bootloader? if so how?
Click to expand...
Click to collapse
Look on Youtube for this video "Flashing SPRecovery SBF File to a Motorola Droid."
I just used those instructions to install a stock Froyo SBF on my Bravo using RSD-Lite. Of course, when dude in the video says to press up on some button on the keypad, you will press up on the volume rocker instead.
I would post the link, but this thing won't allow it.
Wow, I'll never post here again... this farkakte board made me wait 5 freaking minutes to correct a typo in my post (not to make a new post, but merely to edit this one.) Unbe-freaking-lievable!
psterrett said:
Now I need to go about figuring out how to root it again, but that's a headache for another day...
I tried to post the link to the SBF download, but this forum wouldn't let me. So, you'll have to find it on your own.
Click to expand...
Click to collapse
SuperOneClick to root it. http://forum.xda-developers.com/showthread.php?t=803682 Download, follow instructions, pretty easy stuff, makes rooting much easier, worked for me on 2.2. Use psneuter option.
Also, there's a link at the beginning of this thread for the SBF, shouldn't be too hard to find it...
psterrett said:
Wow, I'll never post here again... this farkakte board made me wait 5 freaking minutes to correct a typo in my post (not to make a new post, but merely to edit this one.) Unbe-freaking-lievable!
Click to expand...
Click to collapse
It's because you're a new user, chill man.
jorgonv said:
Unzip th .gz file. The .sbf will be in there, if you dont know where to go from there, search how to apply an sbf
Click to expand...
Click to collapse
And if that doesn't work, what should I do?
GeNiO426 said:
And if that doesn't work, what should I do?
Click to expand...
Click to collapse
It should work if you correctly followed all the steps to apply the SBF.
Did you encounter a problem?
jorgonv said:
It should work if you correctly followed all the steps to apply the SBF.
Did you encounter a problem?
Click to expand...
Click to collapse
Yes, and I did follow all of the steps as they were written. I've been encountering the same problem ever since I received the message that there was an update available.
It keeps saying "E:Can't open /cache/recovery/command" whenever I try to run the installation (for the update).
For the RSD Lite program, I keep getting this error: "Failed flashing process. Failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone connected"
I have no idea what's wrong. I've tried every solution posted on this board as well as Motorola's site, AT&T's site, and countless hours spent searching Google for an answer/solution.
GeNiO426 said:
Yes, and I did follow all of the steps as they were written. I've been encountering the same problem ever since I received the message that there was an update available.
It keeps saying "E:Can't open /cache/recovery/command" whenever I try to run the installation (for the update).
For the RSD Lite program, I keep getting this error: "Failed flashing process. Failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone connected"
I have no idea what's wrong. I've tried every solution posted on this board as well as Motorola's site, AT&T's site, and countless hours spent searching Google for an answer/solution.
Click to expand...
Click to collapse
When you go into recovery mode and select install: update.zip, is "E:Can't open /cache/recovery/command" the only error that shows up?
jorgonv said:
When you go into recovery mode and select install: update.zip, is "E:Can't open /cache/recovery/command" the only error that shows up?
Click to expand...
Click to collapse
Well, that's the first error to show up before I select "apply sdcard:update.zip"
After I select that, this is exactly what comes up:
-- Install from sdcard...
..Finding update package...
Opening update package...
Verifying update package...
E:failed to read footer from /sdcard/update.zip
(Is a directory)
E:signature verification failed
Installation aborted.
That's exactly everything that comes up when I select "apply sdcard:update.zip" at the Android system recovery <2e> screen.
Happening OTA on my SNS as I type this - WHOO-HOO!
No! Mine won't work, i select restart and install, the phone reported with the little android and box with the update progress bar, half WA through the box changed to A warning triangle,what am i supposed to do, there is now nothing in system updates, please help.
Sorry to hear that SWFlyerUK, I can't help with any suggestions I'm afraid.
However, mine is good and I'm having a play with it now - haven't seen much difference thus far though.
Thanks.
I've tried renaming it to update.zip then restart phone holding down volume up, recovery, the Google screen shows then the box and little android then the warning triangle, I've never been able to get into recovery, always me lol
When on the triangle press up + power again and the recovery menu will appear.
Nope thats not doing anything, the only way for me to turn the phone off is to remove the battery - is my device then "update bricked" So I can't access recovery?
When I first turn on the device with the power + volume up I enter the bootloader no problem, when I scroll down to "recovery" the Google screen is shown with the little unlocked padlock, then the box and android, then that changes to the warning triangle and android then nothing happens, can't turn off or anything without removing the battery.
SWFlyerUK, you should try to press keys in different order, press power first and then volume up.
I stayed 5 minutes as you wondering why it didn't work !!!!
Congratulation JTHM, but can you post your start version and the link of the update please ?
Worked a charm - updating now, thanks mate!
Though I'm now getting an error on install;
asset failed: file_getprop("/system/build.prop", "ro.build.fingerprint") == "google/so ju/crespo:2.3.3/GRI40/102588:user/release-keys" || file_getprop("/system/build.prop", ro.build.fingerprint") == "google/so ju/crespo:2.3.4/GRJ22/121341:user/release-keys
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation Aborted.
I'm currently on 2.3.3, is it because i'm installing the wrong update?
My model is GRH78C I9020XXJK8 and installing an i9020T
GRI40, KB1 update?
My origional update that was download via OTA this morning is no longer on my device.
Correction, I do still have the origional called update.zip, but thats not working either.
SWFlyerUK said:
Though I'm now getting an error on install;
asset failed: file_getprop("/system/build.prop", "ro.build.fingerprint") == "google/so ju/crespo:2.3.3/GRI40/102588:user/release-keys" || file_getprop("/system/build.prop", ro.build.fingerprint") == "google/so ju/crespo:2.3.4/GRJ22/121341:user/release-keys
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation Aborted.
I'm currently on 2.3.3, is it because i'm installing the wrong update?
My model is GRH78C I9020XXJK8 and installing an i9020T
GRI40, KB1 update?
My origional update that was download via OTA this morning is no longer on my device.
Click to expand...
Click to collapse
GRH78C is 2.3.2 not 2.3.3 which is why you get that error. You need to upgrade to 2.3.3 (GRI40) first before you can use the upgrade. The script checks for GRI40 and it doesn't find it so it aborts.
Sent from my Nexus S
I got a nice little surprise this morning. The OTA update was waiting for me to install. I didn't have to wait long at all to get. It took a couple weeks for 2.3.3 to land on my phone, but 2.3.4 took a few of days since it was announced. Not too shabby.
Sent from my Nexus S using Tapatalk
Ok so I've got 2.3.3 download, gone to apply the update which got further but was yet again aborted,
I've got assert failed:apply_patch_check("MTD:boot:2949120:ddf4dec1310bc3213cbdee1f4915e86f045755b:2945024:75a5866e391831bdc85dc6a75f81c08f6c5427")
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation Aborted.
I'm sure its the correct file. 98f3836cef93.signed.soju-GRI40-fromGRH78C.98f3836c.zip
If I'm currently rooted on 2.3.3 will my device still receive updates if an OTA upgrade is available or I have to go manual?
Would a total reformt etc of my phone help?
lolopro said:
Congratulation JTHM, but can you post your start version and the link of the update please ?
Click to expand...
Click to collapse
2.3.1 (SIMfree) when I woke this morning -> automatic OTA update straight to 2.3.4.
As it was automatic OTA I don't have a download link. Nice surprise though.
Try flash 2.3.3 full ROM? That's what I did to remove CM7 and get back to stock in order to update to 2.3.4.
Si_NZ said:
Try flash 2.3.3 full ROM? That's what I did to remove CM7 and get back to stock in order to update to 2.3.4.
Click to expand...
Click to collapse
Where do I find a 2.3.3 full rom for my I9023, xxxkb3?
I need it to remove my current CM7 before I can manually flash 2.3.4 into my phone. Would really appreciate it alot if you could guide me.
What do I need to do to ensure I get the OTA update??? Thanks in advance
Sent from my Nexus S using XDA Premium App
Should I do a factory reset on my phone?
This thread is to list the current and upcoming Over The Air(OTA) updates for Moto G XT1550 Indian Version.
Currently there are two version of Lollipop 5.1.1 OTA for XT1550 with Build numbers LP123.72-33 and LP123.72-47.4
Any one captured the OTA for the latest build LP123.72-47.4 can share the links so that we no need to wait for it... The latest update supposed to fix the stagefright issue along woth some stability improvements.
Procedure to update your phone with OTA:
Method 1:
1. Download the OTA file to your phone's SD card root folder.
2. Go to Settings-> About Phone -> System Update
3. Follow the instructions for the update. (NOTE: If the OTA file update is not the latest or is same as current, you will not be able to do any thing and it will show that your device Software is up to date.)
Method 2:
1) Download ***Latest*** 6.0 OTA for XT1550 --->here
2) Copy it to sd card
3) Power off phone
4) Press Volume Up+Down and Power Key for around 5 seconds.
5) Scroll Up/Down using Volume key and go to recovery
6) You will get a no command message
7) Press Power + Volume Up together for 1-2 seconds
8) Go To Cache Clean
9) Wait for 20-30 minutes
10) After process done, click on update from sd card
Download Links
5.1.1 OTA for XT1550 (Build LPI23.72-47.4)--->here
5.1.1 OTA for XT1550 (Build LPI23.72-XX.X) --->here
***Latest*** 6.0 OTA for XT1550 --->here
Credits:
@asrupesh
:good::good::good::good::good:
OTA capturing methods.
How to capture OTA with root:
1. After getting OTA notification, start the download.
2. After download is complete (do not install the update now), just open any root explorer (I recommend ES file explorer) and go to the /cache directory or /data/data/com.motorola.ccc.ota/ on the device root.
3. You can see the downloaded OTA file with name like Osprey_retasia_ds_2gb.XXXXXX.zip, copy this file to SD card and then to your computer.
4. Upload the OTA file to file sharing site and post the link.
How to capture OTA without root:
Follow the instructions from here to capture OTA without root -----> http://forum.xda-developers.com/moto-g/general/capture-ota-root-t2969602
stagefright update
After downloading the update (and not installing it), i opened root explorer in es file explorer, and opened /cache, i couldn't find the update in that folder. Rather I was not able the find the update zip file anywhere.
Same Here i cannot locate the OTA file in the Catch Folder. I updated my Moto g3rd gen XT1550
and the new System version is
23.46.4.osprey_retasia_ds_2gb.retasia.en.03 retin
And the New Build Number LPI23.72-47.2
I found a zip file of 177mb at /data/data/com.motorola.ccc.ota/ in that the file named Blur_Version.23.31.33.osprey_retasia_ds_2gb.retasia.en.03.zip
.....is this what you need..
asrupesh said:
I found a zip file of 177mb at /data/data/com.motorola.ccc.ota/ in that the file named Blur_Version.23.31.33.osprey_retasia_ds_2gb.retasia.en.03.zip
.....is this what you need..
Click to expand...
Click to collapse
yes the OTA should be of 177.4 MB, but just confirm the name... it should be Blur_version.23.46.4.osprey.XXXX ... upload it to file sharing site and PM me the link.
I got the update notification which included stagefright fix as well as some camera fix... I downloaded the OTA (about 170MB). My phone was rooted with the stock recovery. I went ahead and installed. It told me it will take about 10 minutues. The phone rebooted and installed the OTA and restarted once. It again restarted one more time but will not complete the process. I now see a screen with a blank display. Been like this for more than 10 minutes. Nothing happening. Any ideas? How can I force shut down and restart...?
coolmalayalee said:
I got the update notification which included stagefright fix as well as some camera fix... I downloaded the OTA (about 170MB). My phone was rooted with the stock recovery. I went ahead and installed. It told me it will take about 10 minutues. The phone rebooted and installed the OTA and restarted once. It again restarted one more time but will not complete the process. I now see a screen with a blank display. Been like this for more than 10 minutes. Nothing happening. Any ideas? How can I force shut down and restart...?
Click to expand...
Click to collapse
Press powerbutton and hold untill it shutsdown and then restart it by pressing power button again...
pawankonjarla said:
yes the OTA should be of 177.4 MB, but just confirm the name... it should be Blur_version.23.46.4.osprey.XXXX ... upload it to file sharing site and PM me the link.
Click to expand...
Click to collapse
but it shows this version only... Blur_Version.23.31.33.osprey_retasia_ds_2gb.retasia.en.03
pawankonjarla said:
Press powerbutton and hold untill it shutsdown and then restart it by pressing power button again...
Click to expand...
Click to collapse
When I do that the phone shuts down... but before I could press the power button again it boots automatically and I see the initiation motorolla boot image.. after two initial images the phone is agin giving me a blank display.. should I not have done an OTA when my phone was already rooted? What else can I do? Thanks for your help.
asrupesh said:
but it shows this version only... Blur_Version.23.31.33.osprey_retasia_ds_2gb.retasia.en.03
Click to expand...
Click to collapse
ok..just share it.. lets figure out what exactly it is.
I am able to boot into flash mode.. Under software status it say "Modified".. Is there anything I can do through ADB or something to restart the phone? Or can I rollback the last OTA?
coolmalayalee said:
I am able to boot into flash mode.. Under software status it say "Modified".. Is there anything I can do through ADB or something to restart the phone? Or can I rollback the last OTA?
Click to expand...
Click to collapse
What is your exact requirement? DO yyou want to install the latest OTA? What is your device status? Locked bootloader/unlocked? root/no root?
Be specific so that we can quickly answer your issues.
coolmalayalee said:
When I do that the phone shuts down... but before I could press the power button again it boots automatically and I see the initiation motorolla boot image.. after two initial images the phone is agin giving me a blank display.. should I not have done an OTA when my phone was already rooted? What else can I do? Thanks for your help.
Click to expand...
Click to collapse
If your phone is rooted or having unlocked bootloader you can supposedly install OTA. OTA works only woth stock recovery (which comes with Motorola) ....
pawankonjarla said:
What is your exact requirement? DO yyou want to install the latest OTA? What is your device status? Locked bootloader/unlocked? root/no root?
Be specific so that we can quickly answer your issues.
Click to expand...
Click to collapse
My bootloader is unlocked and the phone is rooted with stock recovery. .
I tried installing the OTA. It seem to have installed the OTA. However, the phone is now not restarting. Looks like a boot loop.
when I press the volume down for few seconds the phone shuts down... but it automatically restarts. But does not go beyond the initial two-three screens and then displays a blank display. I am able to get into flash mode.. but the device is not being recognized...
what to do to come out of this situation...
pawankonjarla said:
ok..just share it.. lets figure out what exactly it is.
Click to expand...
Click to collapse
Uploading
coolmalayalee said:
My bootloader is unlocked and the phone is rooted with stock recovery. .
I tried installing the OTA. It seem to have installed the OTA. However, the phone is now not restarting. Looks like a boot loop.
when I press the volume down for few seconds the phone shuts down... but it automatically restarts. But does not go beyond the initial two-three screens and then displays a blank display. I am able to get into flash mode.. but the device is not being recognized...
what to do to come out of this situation...
Click to expand...
Click to collapse
OK.. I can only think of flashing the stock firmware image now If you can able to go to flash mode ...
pawankonjarla said:
OK.. I can only think of flashing the stock firmware image now If you can able to go to flash mode ...
Click to expand...
Click to collapse
I can get to flashmode... however, on ADB terminal, it is not showing any devices.. That means I cant flash the stock firmware image... isnt it?
coolmalayalee said:
I can get to flashmode... however, on ADB terminal, it is not showing any devices.. That means I cant flash the stock firmware image... isnt it?
Click to expand...
Click to collapse
Ok.. let this thread be clean.. it is going off the topic.. Share your questions in Q&A section...
pawankonjarla said:
Ok.. let this thread be clean.. it is going off the topic.. Share your questions in Q&A section...
Click to expand...
Click to collapse
Sorry about that.. will post in Q&A. Thanks for your help.
Hey guys i couldn't get in the beta so i was wondering if anyone has the Nougat update file that i can flash with odin.
Thanks
Join the club. No one has the VZW one for the flat s7 either....
Illogi.xbone said:
Join the club. No one has the VZW one for the flat s7 either....
Click to expand...
Click to collapse
Someone said they are going to try. I offered help if need be
billydroid said:
Someone said they are going to try. I offered help if need be
Click to expand...
Click to collapse
I cannot post outside links so please PM me if you would like to test the file. I will also upload it to Android File Host when I am approved.
jakemastaflash said:
I cannot post outside links so please PM me if you would like to test the file. I will also upload it to Android File Host when I am approved.
Click to expand...
Click to collapse
Hey, send me the link. Other than the files, the proccess should be the very basic odin proccess right?
diego97yey said:
Hey, send me the link. Other than the files, the proccess should be the very basic odin proccess right?
Click to expand...
Click to collapse
I believe it can be flashed from Recovery. It's being tested now, I will be checking for updates\consistency tomorrow with a clean flash and update.
jakemastaflash said:
I believe it can be flashed from Recovery. It's being tested now, I will be checking for updates\consistency tomorrow with a clean flash and update.
Click to expand...
Click to collapse
Keep us posted man
Footer and verification error so far
Same here
Sent from my SM-G930P using XDA-Developers mobile app
dgr581 said:
Same here
Sent from my SM-G930P using XDA-Developers mobile app
Click to expand...
Click to collapse
Sounds like it is throwing errors for everyone . I will be trying to grab a fresh copy today, or tomorrow. Link removed until we have a working update.
jakemastaflash said:
Sounds like it is throwing errors for everyone . I will be trying to grab a fresh copy today, or tomorrow. Link removed until we have a working update.
Click to expand...
Click to collapse
I tried using winrar to repair it but still got error code my recovery has been acting strange tho. It says install system update when i boot to it then gives me a dead droid with yellow triangle but then enters recovery like normal.
vegoja said:
I tried using winrar to repair it but still got error code my recovery has been acting strange tho. It says install system update when i boot to it then gives me a dead droid with yellow triangle but then enters recovery like normal.
Click to expand...
Click to collapse
I believe I have a solution. I am working on it now. Additionally, I'm getting close 10 posts!
jakemastaflash said:
I believe I have a solution. I am working on it now. Additionally, I'm getting close 10 posts!
Click to expand...
Click to collapse
Another update pull failed verification and resulted in another footer error. If installed without any modification it works, but after rooting and pulling the update.zip, trying to install it results in an error. It could be a security measure introduced to the update.zip to prevent installing on a phone without the matching signature assigned during the initial download.
Whenever i tried to follow the link it asked me for a security key ????
footer error
I read on another nougat beta thread that if you get a footer error then you should decrypt your SD and try agian
N3ksta said:
I read on another nougat beta thread that if you get a footer error then you should decrypt your SD and try agian
Click to expand...
Click to collapse
I did not have my SD Card encrypted. I have also noticed some discrepancies between the update.zip I am extracting and the working VZW update.zip. Things like: the boot.img is 0kb, and there are missing CERT.RSA, CERT.SF, or MANIFEST.MF files under META-INF folder.
I have tried extracting it in several different ways\environments and get problems with every pull.
Other variants are working on the same thing with the same issues. I have the last pull I made, but I can't continue working on this as heavily since I'm using my daily driver. I'll try again as new info\solutions come up.
Seems like getting root (with current methods) may be disturbing the file structure. There may be something else at play here since all the pulls still come with a boot.img that is 0kb, and are missing CERT.RSA, CERT.SF, or MANIFEST.MF files under META-INF folder.
Here is the link to the WIP update.zip. I'm going to stop working on this until someone can suggest a better way to root or pull the file without it coming out corrupt\incomplete. Good luck!
Link to the update.zip.
Here is the flashing method used by the VZW folks:
Originally Posted by zimgir124
A method has been found to install the beta without being accepted!
Thanks @jrkruse for finding this method!
1. reboot to download mode (power + volume up +home) and make sure phone says Official under system and binary.
2. If it does not then you must odin the PH1 firmware, use the pit file and the full csc not the home csc file
3. go through setup
4. enable developer options
5. turn OEM unlock off
6. enable USB debugging
7. place Update.zip on Ext sd card in folder named fota
8. power off phone
9. reboot to download mode make sure both system and binary are official.
10. reboot to recovery (Power + volume down + home)
11. choose apply Update.zip from SD card
12. find Update.zip in the fota folder you created on your Ext sdcard
13. click yes to apply
After this it should update to the Android 7.0 beta and hopefully will be able to download future beta OTAs.
You will not lose anything as this is an OTA
You do not want to be rooted. You must be stock for this to work!
There is no gear VR available on the beta.
Troubleshooting:
"E: footer is wrong" followed by "E: signature verification failed" : Decrypt SD Card and try again.
Click to expand...
Click to collapse
jakemastaflash said:
Seems like getting root (with current methods) may be disturbing the file structure. There may be something else at play here since all the pulls still come with a boot.img that is 0kb, and are missing CERT.RSA, CERT.SF, or MANIFEST.MF files under META-INF folder.
Here is the link to the WIP update.zip. I'm going to stop working on this until someone can suggest a better way to root or pull the file without it coming out corrupt\incomplete. Good luck!
Link to the update.zip.
Here is the flashing method used by the VZW folks:
Click to expand...
Click to collapse
So should this method work for us?
jakemastaflash said:
Seems like getting root (with current methods) may be disturbing the file structure. There may be something else at play here since all the pulls still come with a boot.img that is 0kb, and are missing CERT.RSA, CERT.SF, or MANIFEST.MF files under META-INF folder.
Here is the link to the WIP update.zip. I'm going to stop working on this until someone can suggest a better way to root or pull the file without it coming out
Here is the flashing method used by the VZW folks:
Click to expand...
Click to collapse
Is it for the flat or edge? also have you tried using adb to pull the file (you probably have, but just asking)
15jpenni said:
So should this method work for us?
Click to expand...
Click to collapse
Ideally it should. However, I have not been able to successfully reproduce the same results as installing the update file without modification.
---------- Post added at 09:04 PM ---------- Previous post was at 09:00 PM ----------
N3ksta said:
Is it for the flat or edge? also have you tried using adb to pull the file (you probably have, but just asking)
Click to expand...
Click to collapse
This is for the SM-G930P regular S7 (not edge). I have pulled it via filemanager app after full root, and via adb on linux and windows after eng kernel root and full root. All of them yielded an apropriately sized update.zip, but it seems to get corrupted during the rooting or extraction process.
Also, there may be a reason behind our update.zip not having a boot.img. We may not need a new boot.img after updating to PJ2, so it isnt packaged in our update. If someone can repackage the update.zip so it passes verification we may have more luck.