The first update to HTC HD Mini from HTC's site now available!
Oops, dozer123456 had allready posted this information!
I'm from polish, what should I chose, europe 1 or europe 2. Sorry for my english.
has anyone who installed this confirm that video recording in 640x480 works after update?
Video recording on card is working fine in 640x480 after update.
I have 1.32.479 ROM posted in ROM development area and HTC hotfix installed.
All Data erased ?
Is it an update or will be all data erased ?
Greetz Peppo
It's a hotfix. It starts like a ROM install but data are not deleted
omg.. jus install... it starts and hangs.. then my installer says connection error... dofh..
spl loader showed on my hd mini... tried to remove usb, tried to press and hold power... no help..
maybe i'll wait for 30mins then do a soft reset.. lol
Rafi1980 said:
I'm from polish, what should I chose, europe 1 or europe 2. Sorry for my english.
Click to expand...
Click to collapse
I downloaded from both mirrors, didn't see any difference in DL speed, so as long as your from europe, does not matter which download-mirror you choose.
Cheers!
Hi all,
Did a soft reset by pulling the batt... i restarted my laptop as well as a precaution... then restart the update program again... this time went ok... after SPL loader... saw the HTC screen with update progress..
Protocol Version updated from 32.26.05.04U to 32.2083.05.06U
Paroni said:
I downloaded from both mirrors, didn't see any difference in DL speed, so as long as your from europe, does not matter which download-mirror you choose.
Cheers!
Click to expand...
Click to collapse
Ok, Thx
Did anyone notice that the reception goes haywire(bad) after the patch??
I notice in my office it drops to one bar at times... not sure if its jus my own feel or something...
anyone can comment?
Do I have to instal a patch when I do HR?
I guess your HR means Hard Reset???
Dont have too.. rightfully, this is a hotfix, hotfix dont have to do that
I can't install this update ... it says that i should check the USB cable but it is connected and synced ... am i missing something?
ERROR [260]: CONNECTION
Click to expand...
Click to collapse
problem installing update
I went to the website, downloaded the update and followed the on screen instructions. it said it would update the image from 1.10.161.1 to 32.2803.05.06 in doing so, the coloured bars came up on the phone, then the black htc screen with the installation bar. it got to 5% both on the phone and my pc, then read this error: ERROR [294] : INVALID VENDER ID I tried all the update files from ur website Europe 1 and 2, US, and even Asia 1 and 2 with no luck on any of them.
I have a htc hd mini unlocked from vodafone and using an o2 simcard. Any ideas why it wont install, or how i can fix this problem?
Thanks
chuachongchee said:
I guess your HR means Hard Reset???
Dont have too.. rightfully, this is a hotfix, hotfix dont have to do that
Click to expand...
Click to collapse
Yes, it means hard reset Patch was instaled again, is it something wrong?
hi all. My Hd mini still having some problem with the ringtone.
When somebody is calling me, the ringtone is turning down the volume after few seconds (like underwater, muffled). I switched off a function "Quiet ring on pickup" but it doesn´t help. What is interesting, this problem is not doing every time. Sometimes not. But usually yes. I did a Hard reset, too, but it persists.
anyone got solution for this?
Related
Hi, Don't know if anyone can help. I had a perfectly working XDA2 up until I tried to upgrade the ROM the other night. Now I have a useless hunk of junk that states "error 112 CE ROM update error. I have browsed every fix given on the forums, but to no avail. As my unit is covered by warranty (and I may possibly be getting a XDA2s as a replacement heh heh") I am not too bothered, however although a newbie I would still like to know if there is any way I can fix this problem that I haven't yet tried, just for future reference. At the moment the only display I get, on an unlit screen is either serial V1.03, when not in cradle or usb v 1.03, when in cradle. I have tried soft reset, hard reset, tried a coupe of rom upgrades, disbled active sync, and even tried prayer and using the force! Unfortunately my jedi powers are not sufficiently develpoed enough, so I would be very grateful if you could help me out here. Incidentally, this site is fantastic! Thank you to all who are resposible for it, and long may it continue. Merry Xmas!
You could try flashing with the launch rom from O2, I dont have the link for the download but I am sure somebody else has. The launch rom was available for download so you could revert in case of problems.
cruisin-thru said:
You could try flashing with the launch rom from O2, I dont have the link for the download but I am sure somebody else has. The launch rom was available for download so you could revert in case of problems.
Click to expand...
Click to collapse
I had same eror 112 CE rom bla bla bla... on my comp.
Some program from my comp. crashed upgrading every time.
Solution that worked for me was clean computer with only activesync instaled and everything worked fine with same ROM from before.
Thanks guys, will try those methods. Nothing to lose eh! Merry XDA-MAS to you all. Ho ho ho!
I had the same or similar problem, just upgrading from the official 1.72.181 a window came up telling some thing was wrong, do a hard reset and try again.
After the hard reset all I can see on the unlighted screen was a Serial 1.06.
Launched the upgrading program again with the PDA on the craddle and it seems to be performing correctly and I can see the upgrading process in the PDA screen if alighted with a torch.
May be if you try it again you succeed.
Jose Adell
Hi Guys,
Over the last 4 days I have been reading the posts and trying all sorts of possibilites to fix my Mini O2...
I did the stupidity of upgrading it without a back up. I bought a german O2. I live in Germany, but guess what I don't speak german. So, either I waited 10 years until I can, or updated it to english.
It all went wrong... nevertheless, I manage to download the qtek and used the no id software to upgrade it. it goes well, radio, ext rom, but when updating the rom - when it gets to half way, the program says there was a problem in upgrading the rom. Maybe some german configuration problem?
Can you guys guide me please? thanks a lot!!
I sorted it out.
Thanks for all those who took the time to look at it. Somehow mx Mini is crazy. What I did in the end was uploading each batch at time. Started with the Rom itself, thereafter the ext Rom and last the radio. I did that by extracting the whole package to a folder and removing/returing the parts I wanted at time. So now I have a full english version in my German O2.
Re flashing phone with wwe rom
What you need is to go into boot up mode on comapct i.e black screen with usb and seriel showing only. then you need to get with Maupgrade patch file and then you can bypass security issues on phone and re flash to wwe roms i.e qtek or i mate jam. Hope this helps everything you need is on this site.p.s remember to unzip the wwe file to get the 7 files and replace patch there before updating. 8)
email me on [email protected] for any queries i will try to help
Re: Re flashing phone with wwe rom
leeeel said:
What you need is to go into boot up mode on comapct i.e black screen with usb and seriel showing only. then you need to get with Maupgrade patch file and then you can bypass security issues on phone and re flash to wwe roms i.e qtek or i mate jam. Hope this helps everything you need is on this site.p.s remember to unzip the wwe file to get the 7 files and replace patch there before updating. 8)
email me on [email protected] for any queries i will try to help
Click to expand...
Click to collapse
Hello , I have a similar problem : I have a Qtek S100 from France but live in the USA . I tried to switch ROM with a WWE one (WWE_11200-172_11200.exe) and got a COUNTRY ERROR msg ; then I replaced the MaUpgrade by a MaUpgrade_noID one and now i am getting an "ERROR 150 : UTILITY ERROR" message ; dont really know what else to do and my phone is on boot mode ....
Could you please help...
Thanks in advance
Hello Guys,
Disaster. I tried updating to the new ROM from the O2 website and it fails with : "ERROR114....
Tried the version from this great forum and guess what? same error.....
HELP !!!!!!!!!!!!!!!!! :shock: :shock: :shock:
My XDAIIi was brill. Now its dead...
Try putting the 2i into bootloader mode by pressing the power button, action pad down and the reset button at the same time. The screen will say serial with a version number at the bottom. When you connect it to your computer this should change to USB. Then try running the update again.
If you are using the modified version I posted on this site then the install will fail. Just run the program MAUpgradeUT_noid.exe a second time without touching the 2i at all.
Hope all goes well.
Hi Pug,
Unfortunaely that has not work. see screen shots attached.
can anyone tell me what this damn error is pls...............
oh by the way the iMate PDA2 rom fails as well with the same error. !!
If both your devices are failing to upgrade the problem must lie with your computer somewhere.
Are you using firewalls like zonealarm which may be interfering with the update process. If so try disabling them.
I assume you are connecting using USB and not serial. Do so if for no other reason than it's faster.
Are you using Activesync 4? More stable for upgrading than 3.8 but lacks sync over LAN feature - not a great deal if you've never used it. You can find this on the wiki link top left of this page.
Try downloading the packages again. I've posted the radio rom here as thats the one you seem to be having immediate problems with. Download it and overwrite the one on my modified rom.
I'll post more if I think of anything as I'm suffering a hangover right now and can't think too much cos it hurts. :?
thnx pug,
really appreciate your help. yes iam running firewall (norton). I will try your modified radio and advise. fingers crossed. and thnx once again.
using activesynch 4 as well from this forum
Hi pug,
Sorry the radio did not work. renamed the radio and ran update and the update works for nk.nbf and ms.nbf files. without radio the phone does not work but proved that there is no problem with my pc or usb cradle etc. the problem is the radio.
my IMEI is 354962000270150.
the radio file from the Launch rom from O2 does not work, so either my IIi has a damaged component or something else that I am not aware of.
copied your radio file to the other iMate upgrade and it still fails with the same error 114 !!
Any other ideas or suggestions pls, its really depressing to loose the XDAIIi permanently.
Oh I forgot to mention that the IIi is also unlocked and the ExtROm is unlocked as well. Will this make a diffeence?
The fact that the 2i is unlocked won't make any difference. The EXTRom on the 2i can't be unlocked and always results in the storage being locked which will stop the phone being updated. Maybe not at the actual update stage but certainly further down the line after the hard reset.
Ok now I have have tried various things as posted in this forum in various sections. Still get the same error.
Originally about 3 months ago, I had to hard reset, then I used the Launch ROM from the O2 website. I still have that original exe but that also NOW fails. I am now running out of options.
Any other ideas?
It might be that because you have unlocked the Extended ROM that it causes this fault, either that or you device has an internal problem which you cannot fix.
Take it back to the shop they will replace it.
114 error
I got my XDA2i back from O2 after a warranty mainboard replacement and decided to upgrade with the new O2 rom..horrors.. I got the 114 error and repeated efforts failed to cure it. I then inatalled a/sync on another PC and ran the upgrade from there...
Bingo! it worked..always worth a try if things defy logic.
Probably an old firewall that didn't uninstall properly.
One thing though, does anybody know when my backup battery will kick in and charge.
It arrived back from O2 completely dead but even with the main battery full it doesn't want to take a charge yet??
Hitla
Just humour me and try the radio upgrade on another PC... That's how i got round my 114 error
To all the people who have advised me... thank you.
I have tried the upgrade on 2 other laptops I have, one with Activesync 4 and one with Activesync 3.8.
AND..... the same failure error.
I have now taken it back to O2 and they have taken it in for repair !!
Should rcv it back next week hopefully repaired or replaced !!
Will keep you guys posted.
Once again great forum and great posters with serious technical advice.
Well done keep it up.
Soory guys,
Have been away for the last few weeks, so unable to update you all.
Well O2 replaced my device. It has the new ROM but the old radio !!
I would like to thank all of you advised me.
Hi,
I just downloaded the O2 Rom-Upgrade.
To keep my 2020i in German I only did a Radio-Update from 1.02 (ran the installer and copied the files to a different directory together with the AllUgrade kindasomething.....)
The update worked, it always worked this way, but after the update the Radio showed up as 1.00.00 (MUST be 1.03, at least that is what o2 says....)
Any idea?
Thanks, Günter
P.S.: I should add that the phone works..
Previously when i updated to 2.2. It lagged very much every where. Even the virtual keyboard used to open with a short delay but now finally updated to 2.2.1 Baseband I9000XXJPY and believe me its fast. All the lag problems are almost gone. Option to update firmware directly from handset now available.
What is your product code? XEU ? mine DBT and i'm desperately need to update to 2.2.1
off update or flash?
cldwar said:
Option to update firmware directly from handset now available.
Click to expand...
Click to collapse
Be interesting to know when this will be implemented. Currently only shows "unable to connect to server". Elsewhere on the forum there is a thread on a new version of Kies. http://tinyurl.com/368p4a7
Anyway I agree it is fast, pretty well lag free and I am getting satisfactory battery life after dumping some apps that I no longer needed after update. I do use Juice Defender BTW.
Mine connects to the server (you must have a Samsung account) but reports no updates available.
amwebby said:
Mine connects to the server (you must have a Samsung account) but reports no updates available.
Click to expand...
Click to collapse
Yes I have an account.
imkr1 said:
What is your product code? XEU ? mine DBT and i'm desperately need to update to 2.2.1
Click to expand...
Click to collapse
dnt knw hw to see that . ..
Rofa1 said:
Be interesting to know when this will be implemented. Currently only shows "unable to connect to server". Elsewhere on the forum there is a thread on a new version of Kies. http://tinyurl.com/368p4a7
Anyway I agree it is fast, pretty well lag free and I am getting satisfactory battery life after dumping some apps that I no longer needed after update. I do use Juice Defender BTW.
Click to expand...
Click to collapse
I got the option to update from cell phone after updating to 2.2.1, so no new update available as i have just updated to the latest version ...
repllccax said:
off update or flash?
Click to expand...
Click to collapse
Using samsung Kies
Rofa1 said:
Yes I have an account.
Click to expand...
Click to collapse
Have you logged into that at the Update section? I only got the error message you mention prior to entering that information.
Have you reseted the phone after 2.2.1?
I haven`t, the phone was very fast and every apk was working then after swapping batteries it freezed on boot for 2min then reseted itself, all numbers gone,
I`m really affraid this gone happen again, because I switch often between batteries.
amwebby said:
Have you logged into that at the Update section? I only got the error message you mention prior to entering that information.
Click to expand...
Click to collapse
Yes I am logged in. Just tried again as a matter of interest and it spent 2 mins "connecting to server" and then disconnected with a brief message flash which said "connection failed". Maybe it's a regional thing. I'll come back to it in a week or so.
sonci said:
Have you reseted the phone after 2.2.1?
I haven`t, the phone was very fast and every apk was working then after swapping batteries it freezed on boot for 2min then reseted itself, all numbers gone,
I`m really affraid this gone happen again, because I switch often between batteries.
Click to expand...
Click to collapse
No problem. Froze on one app (now uninstalled) and had to remove battery to reset and boot.
Rofa1 said:
Yes I am logged in. Just tried again as a matter of interest and it spent 2 mins "connecting to server" and then disconnected with a brief message flash which said "connection failed". Maybe it's a regional thing. I'll come back to it in a week or so.
Click to expand...
Click to collapse
Could be regional. Where are you? I'm in the UK. This update seems regional specific as, when I did a factory reset, UT asked me which SIM scheme I was on; o2 postpay, o2 prepay or Tesco.
I'm in Finland. Certainly sounds regional and/or operator. Seem to remember reading that one of the US versions used OTA updating.
mine wouldnt reset after removing system apps.. (boot loop). so i reflashed and reset immiately after install.. someone else pointed out that factory reset does not work if you have removed any system apps.. so that couldve been the reason.. havent retried cause dont want to reinstall everything.
sonci said:
Have you reseted the phone after 2.2.1?
I haven`t, the phone was very fast and every apk was working then after swapping batteries it freezed on boot for 2min then reseted itself, all numbers gone,
I`m really affraid this gone happen again, because I switch often between batteries.
Click to expand...
Click to collapse
no i have not reset my phone . . its working better then ever . .. ! didnt tried taking out the battery . . will do later den will reply
Now after using 2.2.1 for a couple of days i came to the conclusion that battery life has improved a lot ! i dont know what Samsung did , .. .. but they did the right thing .. now if only they could announce a date for 2.3 !
Not avaible in Finland.. any clue when it is gonna be available trought KIES
Hello, today I got my Amazon Kindle Fire! After starting an connecting to my Wifi network, I made an update, wich was available! But after installing the update I can´t find any Wifi-network! Also tried the factory reset, but didn´t work!
Can anybody help me? Is it possible to downgrade or something else??
Thx Chris
masterc1111 said:
Hello, today I got my Amazon Kindle Fire! After starting an connecting to my Wifi network, I made an update, wich was available! But after installing the update I can´t find any Wifi-network! Also tried the factory reset, but didn´t work!
Can anybody help me? Is it possible to downgrade or something else??
Thx Chris
Click to expand...
Click to collapse
Try contacting tech support they might have something for you to flash. And if they do, you should post the files and process here. Unfortunately without solid kernel, or recovery information there's little we can do.
Sent from my SPH-D710 using xda premium
Hopefully, cause I don´t want send it back
After chatting with Amazon, the problem wasn´t solved! But I looked a bit more on the Amazon Homepage and found where I can download the Software Update to 6.1:
Download Link
And here is the instruction:
http://www.amazon.com/gp/help/customer/display.html/ref=hp_k6_updatesi?nodeId=200790620
I will try it now and report what happends!
I think you already have that don't you?
When I got my KF, it immediately before I did anything updated to that version.
Code:
Current Version 6.1_user_2017120
Yes I have the one but I´ll try to run the update again manuelly, or do you think t wont work?
Masterc, didn't you say in another thread that you are in Austria?
You should mention that here if it is the case as it might affect the responses you get.
Yes thats true, but Wifi worked before I downloaded and installed the update! It also showed my name... the Amazon support told me it should work abroad..
I tried to install the update again, but it didn´t solve the problem.
So after playing around a while, the network pops up (yeahh) but when I enter the (right) passwort it always shows:
Error in conncection
unable to connect to selected access point. Please check the password you have provided
the kindle found my hotspot from my galaxy note (without password) and it connected just one time for arround 10 seconds..
Now I can´t connect again... quite intressting
Hopefully it is not the hardware - but I don´t think so otherwise I couldn´t download the update.