There is a thread with this info in it, but it is buried deep in over a hundred pages and I thought the warning for HelixLauncher bared having a new post.
Here is the link to download the update.
http://android.clients.google.com/packages/passion/signed-passion-FRF50-from-ERE27.1e519a24.zip
Looks like that link is dead... here is a mirror
http://dl.dropbox.com/u/113487/signed-passion-FRF50-from-ERE27.1e519a24.zip
And one more just in case the others go down.
http://www.filefactory.com/file/b1chb29/n/update-nexusone-FRF50-signed.zip
Warning!! If you use Helixlauncher, uninstall or remove its defaults. It will go into a Force Close loop, making the phone unusable without booting into recovery again and performing a factory wipe/reset.
How to flash the update, I used these steps and it worked fine, but remember, there is always the possibility to brick the phone.
1. Download file from link up there.
2. Rename the file to update.zip.
3. Note that if you're using Windows and don't have "show file extentsions" turned on in the file explorer you won't see a .zip. Just rename it to "update" (no quotes, of course) because it's already a zipped file.
4. Copy the update.zip file onto your microSD card.
5. With your Nexus One off, hold down the trackball and press the power button.
6. You'll be booted into a white screen with three Android robots on skateboards. Select "Bootloader."
7. On the next screen, select "Recovery."
8. Your phone will reboot, giving you a picture of the Android robot and an exclamation point inside a triangle.
9. Now press the power button and volume up button at the same time. It could take a couple of tries.
10. Now (using the trackball this time) choose "Apply sdcard:update.zip" and let things run their course.
Taken from the update-1 instructions on:
http://www.androidcentral.com/how-ma...your-nexus-one
Also, I don't think my phone rebooted own its own after the update. After a minute or two, I tried hitting power and power+vol up to get the menu and reset manually. During that time it reset and booted up fine. So I say give it a few minutes before trying to reboot after the update finishes.
Edit: a ton of threads have popped into existence about froyo, but I didn't see any with early warnings about Helixlauncher.... ah well, maybe this post can be helpful for someone out there.
Edit 2: From what I am seeing, AT&T phones are on a different build of Android than the T-mobile N1. Seems like if you have an AT&T version you are out of luck for right now. This update was meant for the demo devices given to the Press outlets around launch, before the AT&T phone existed.
thanks for this, just a quick question.
Is this ok to use on a nexus one in england? it's not usa only or something is it?
thanks
Can it be flashed over Cyanogen? I read somewhere that it couldn't...
shrub said:
thanks for this, just a quick question.
Is this ok to use on a nexus one in england? it's not usa only or something is it?
thanks
Click to expand...
Click to collapse
If it is a US update then using it on a nexus one in England might not be a good idea, but I doubt it would hurt the phone, but some things might not work right.
St.Jimmy! said:
Can it be flashed over Cyanogen? I read somewhere that it couldn't...
Click to expand...
Click to collapse
You have to be back to stock recovery, so best to follow the directions in this thread. -> http://forum.xda-developers.com/showthread.php?t=686593
you made my day, man. Downloading...
Marine6680 said:
If it is a US update then using it on a nexus one in England might not be a good idea, but I doubt it would hurt the phone, but some things might not work right.
You have to be back to stock recovery, so best to follow the directions in this thread. ->
I flashed it over cyanogen 5.0.7 Test2 and it worked without any problem. Just helixlauncher is going nuts
Click to expand...
Click to collapse
Yeah I had to do a wipe when Helixlauncher went nuts on me, but Android restored all my apps for me lol.
Re: Official Froyo 2.2 update download, instructions, and HelixLauncher user Warnings
So...can we reinstall helixlauncher safely after updating? Just want to make sure
naynada said:
So...can we reinstall helixlauncher safely after updating? Just want to make sure
Click to expand...
Click to collapse
Not sure if Helixlauncher will already work with Froyo
i keep gettin installation aborted
Ritmjunk said:
Marine6680 said:
If it is a US update then using it on a nexus one in England might not be a good idea, but I doubt it would hurt the phone, but some things might not work right.
You have to be back to stock recovery, so best to follow the directions in this thread. ->
I flashed it over cyanogen 5.0.7 Test2 and it worked without any problem. Just helixlauncher is going nuts
Click to expand...
Click to collapse
Wait what?!?! Your saying it works just flashing over CM? Iv read all day that you have to go back to stock.. Have you tried/know if it works over 5.0.6?
Click to expand...
Click to collapse
Crime843 said:
i keep gettin installation aborted
Click to expand...
Click to collapse
I cant find it in the market anymore .....
johanove said:
Ritmjunk said:
Wait what?!?! Your saying it works just flashing over CM? Iv read all day that you have to go back to stock.. Have you tried/know if it works over 5.0.6?
Click to expand...
Click to collapse
I'm not joking really. I flashed it over cyanogen 5.0.7 TEST 2 and my N1 is working fine. I'm from Belgium and bought the N1 in U.K.
Click to expand...
Click to collapse
Ritmjunk said:
johanove said:
I'm not joking really. I flashed it over cyanogen 5.0.7 TEST 2 and my N1 is working fine. I'm from Belgium and bought the N1 in U.K.
Click to expand...
Click to collapse
Ok I assume you used Paul's release then?
Click to expand...
Click to collapse
johanove said:
Ritmjunk said:
Ok I assume you used Paul's release then?
Click to expand...
Click to collapse
Jeeee yes, sorry .... I just saw the header and this topic is about the official release/download. Indeed I used Pauls release..... sorry my mistake.
Click to expand...
Click to collapse
naynada said:
So...can we reinstall helixlauncher safely after updating? Just want to make sure
Click to expand...
Click to collapse
Ritmjunk said:
Not sure if Helixlauncher will already work with Froyo
Click to expand...
Click to collapse
Yeah I'm thinking the new update broke it, helixlauncher is integrated much deeper into th OS than most apps, so it would be more vulnerable to even small changes
Crime843 said:
i keep gettin installation aborted
Click to expand...
Click to collapse
I read somewhere, that another person had the same issue. Are you using stock recovery? Also, are you on the latest 2.1 update 1? I'm not sure the issue really. Try a search of the other threads, see if there is a solution.
same here... tried it twice with installation aborted each time. Redownloaded the file... renamed and copied to the sd card again.... same results.
Ritmjunk said:
johanove said:
Jeeee yes, sorry .... I just saw the header and this topic is about the official release/download. Indeed I used Pauls release..... sorry my mistake.
Click to expand...
Click to collapse
Cool, ill give it a try then. Thanks for your quick response!
Click to expand...
Click to collapse
Can someone post a link to HelixLauncher? Can't find it in the Market.
Thanks!
about the HELIXLAUNCHER:
there is NO NEED FOR WIPING everything! i had the same problem after updating and these force kills were really anoying.
here's what you have to do
1. remove your sim card (necessary because other wise your phone will reboot in safe mode - don't ask me why, but it did)
2. get into safe mode: (menu button long press while the X flashes on the load, give it a few tries, it vibrate long if it works)
3. delete helix
4. reboot
5. pray and thank me ;-)
worked for me!
Related
I installed the new 2.1 Sprint leak using the RUU .exe file, but my apps are not showing up in the Market. Is there a way to go back to Damageless 2.1?
spatel9114 said:
I installed the new 2.1 Sprint leak using the RUU .exe file, but my apps are not showing up in the Market. Is there a way to go back to Damageless 2.1?
Click to expand...
Click to collapse
Ya did something wrong, it's working great for myself as well as others!
nandriod....did you make a backup?
spatel9114 said:
I installed the new 2.1 Sprint leak using the RUU .exe file, but my apps are not showing up in the Market. Is there a way to go back to Damageless 2.1?
Click to expand...
Click to collapse
Thats because the RUU has NONE of the fixes that damageless had put in to make things work like they should. Try flashing it.
You need a custom recovery again first, and maybe busybox and some other stuff...
regaw_leinad said:
Thats because the RUU has NONE of the fixes that damageless had put in to make things work like they should. Try flashing it.
You need a custom recovery again first, and maybe busybox and some other stuff...
Click to expand...
Click to collapse
What do you mean try flashing it? I went back into my SD card to try to get Damageless 2.1 again, but it says the update.exe is not verified..
Roman G said:
Oh for the love of god, he did not fix&&£&£
It's works great right out of the box! Give it a rest!
There is nothing not working!
Click to expand...
Click to collapse
I guess i know you're kidding, so I wont take that personally.
spatel9114 said:
What do you mean try flashing it? I went back into my SD card to try to get Damageless 2.1 again, but it says the update.exe is not verified..
Click to expand...
Click to collapse
Download the .zip from his thread, then boot to recovery and flash it, wiping first.
http://forum.xda-developers.com/showthread.php?t=656690
regaw_leinad said:
Download the .zip from his thread, then boot to recovery and flash it, wiping first.
Click to expand...
Click to collapse
Yeah, I tried that, but when I go to flash the ROM, it says the update is not verified, installation aborted..
Roman G said:
I am not saying he has not fixed anything in the past, but this RUU is 100% fully functional, there is noting wrong with it!
Click to expand...
Click to collapse
Can you adb shell and do anything?
Does SU work?
just wondering... I haven't tried running the ruu on my phone personally.
regaw_leinad said:
Can you adb shell and do anything?
Does SU work?
just wondering... I haven't tried running the ruu on my phone personally.
Click to expand...
Click to collapse
Alright yeah, I'm not sure what that means, lol I'm relatively new to all of this..sorry
So I wiped again, but still no protected apps in the Market..
Thread Cleaned.
Quit the [email protected] people please, keep it on topic and stop the flaming or some of you will be having a small holiday.
CHeers and enjoy your weekend!
spatel9114 said:
What do you mean try flashing it? I went back into my SD card to try to get Damageless 2.1 again, but it says the update.exe is not verified..
Click to expand...
Click to collapse
it should be an update.zip
not exe
just download his newest ROM. name it update.zip
put it on your sdcard (root location)
boot into recovery (by holding down the home and power button at the same time)
wipe/factory reset
then flash (apply: update.zip)
Download files and place on SD card:
update-nexusone-FRF50-noradio-signed.zip from Modaco.com (May 24: noradio files added - should work fine for T-Mo & AT&T!)
froyo-rooter-signed.zip from Cyanogen
Titanium Backup -> Backup all user apps
Turn off phone -> Hold Volume Down, then Press Power button
Enter Recovery
Backup/Restore -> Nand backup
Wipe if you have a Sense UI ROM (no wipe needed coming from Cyanogen)
Flash update-nexusone-FRF50-signed.zip
Reboot, you'll get Android-falling-out-of-box
It will reboot into Recovery, select Reboot again
It should boot into 2.2, yay!
You should still have root, but if you want BusyBox (or lost root somehow), Cyanogen has done it again! Go back into Recovery and flash froyo-rooter-signed.zip. Then Titanium Backup will work once again.
Cyanogen for Prez
Paul for vice prez
(no hate on paul... just cant be prez since he wasnt born here )
i'm getting a picture of an Android falling out of a box
joksinjai said:
i'm getting a picture of an Android falling out of a box
Click to expand...
Click to collapse
I got that while the radio was updating, it should boot back into the recovery menu then reboot once more for FroYo
nDrg said:
I got that while the radio was updating, it should boot back into the recovery menu then reboot once more for FroYo
Click to expand...
Click to collapse
It worked! this is my first time doing this, so i got scared of the open box based on Paul's 100% fool proof guide
=)
joksinjai said:
i'm getting a picture of an Android falling out of a box
Click to expand...
Click to collapse
Yep! When it reboots to recovery, reboot again. Updated OP
Thanks Paul And Cyanogen!
As Always...Great work!
iam trying
once your done installing 2.2 get flash
http://www.androidcentral.com/now-we-have-froyo-its-time-feed-flash-android-22
Freaking sweet! I lost root for whatever reason. Glad to see that Paul and Cyanogen pumped this stuff out! And a flashing I will go!
My flash runs like crap unfortunately. I am getting some FCs too on SMSing apps
Does this work on AT&T devices?
AGeleff said:
Does this work on AT&T devices?
Click to expand...
Click to collapse
I think only if you're rooted. I'm not sure.
AT&T users in the Modaco thread have said it worked. Here's one poster who's done it:
http://android.modaco.com/index.php?s=&showtopic=309286&view=findpost&p=1284057
Post #76:
I think you can just not flash the radio, I do have an AT&T frequency too so I am not taking chance, I will remove the radio.img prior to install
Click to expand...
Click to collapse
don't worry about it. Just flash it. You'll get a speed bump. I did. Getting about 1mb faster DL speeds. Its crazy... especially since its mid-day saturday. I'm on ATT 3g in chicago.
Click to expand...
Click to collapse
Though as the previous person said, you may have to remove the radio.img in the zip. I'm totally not sure. Has anyone here done it?
AGeleff said:
Does this work on AT&T devices?
Click to expand...
Click to collapse
It should work on any rooted Nexus handset.
AGeleff said:
Does this work on AT&T devices?
Click to expand...
Click to collapse
People are saying in this thread that it DOES indeed work!
http://forum.xda-developers.com/showpost.php?p=6563603&postcount=255
http://forum.xda-developers.com/showpost.php?p=6563614&postcount=256
so when updating to froyo does rooted nexus one becomes just like the stock one, means do we need to root it again to install custom Rom
Thank you. This is awesome and super easy to execute. Thanks again.
Nice! thanks for the write up.
one thing that confuses me though, i have rooted my phone but have the stock rom (nadroid from cyanogen 506), will i be able to get the OTA when it rolls for the ATT version? Or only manual update for me?
thanks.
Everything works, great post by paul as usual
I followed these steps (was running Cyanogen 5.0.6) and it works perfectly. I have the AT&T/Rogers version. I didn't wipe and all my apps/settings are intact!
I went ahead and ran the firmware update Last night. The progress bar went all the way through, but when it got to the end it said "update is fail." I don't know what to do. I booted into stock recovery and I'm wondering what will happen if I click "reinstall packages." Any chance this will undo whatever the firmware did? What will happen?
trunkstar1 said:
I went ahead and ran the firmware update Last night. The progress bar went all the way through, but when it got to the end it said "update is fail." I don't know what to do. I booted into stock recovery and I'm wondering what will happen if I click "reinstall packages." Any chance this will undo whatever the firmware did? What will happen?
Click to expand...
Click to collapse
Odin to stock..
http://forum.xda-developers.com/showthread.php?t=734475
I don' get it, what does that mean?
trunkstar1 said:
I don' get it, what does that mean?
Click to expand...
Click to collapse
Click on the link & do what it says
ah, sorry. read to quickly and didn't see the link.
I'll do that, but I'm still curious what will happen if I click reinstall packages from stock recovery.
trunkstar1 said:
ah, sorry. read to quickly and didn't see the link.
I'll do that, but I'm still curious what will happen if I click reinstall packages from stock recovery.
Click to expand...
Click to collapse
Well reinstall packages as in? What is your update.zip?
Is it the one from Clockwork?
That's a good question. I don't know what it is. I was hoping that clicking on it would work like going back to a restore point or something...
I guess it might actually be the one from clockwork...
trunkstar1 said:
I guess it might actually be the one from clockwork...
Click to expand...
Click to collapse
Well it don't matter, I'm pretty sure that no "Update.zip: e.g; reinstalling packages will take your phone back to stock, You must use Odin to do that, Read that thread I posted a few comments up..
When I try to boot into download mode, I hear the T-Mobile jingle, but then it just stays on the "Vibrant" screen... Any tips? Not sure what I'm doing wrong.
Finally got into download mode with the help of another awesome xda forumer. I'm on step 4 now. Which .pit file do I select? I downloaded the first three files on this page: http://forum.xda-developers.com/showthread.php?t=734475
There's two .pit files there though. Which do I use?
s1_odin_20100512.pit
s1_odin_20100513.pit
Had my last question answered with some more great help. Next, is the "PDA" file the "T959UVJFD.tar" ??
My questions been answered here. Thanks to those who pointed me in the right direction(s).
I obtained root and rebooted so I could wipe and flash the Syndicate ROM. I had it on my SD Card (at least I sure thought I did). After wiping, I choose to flash a zip file from the SD card, and the ROM file isn't there. Now I can't boot, I can't apply a ROM. What's my best bet here?
Squiggy45 said:
I obtained root and rebooted so I could wipe and flash the Syndicate ROM. I had it on my SD Card (at least I sure thought I did). After wiping, I choose to flash a zip file from the SD card, and the ROM file isn't there. Now I can't boot, I can't apply a ROM. What's my best bet here?
Click to expand...
Click to collapse
take out the sd card and just put it in another phone or on the computer and to the rom you want on it and then put it back in your phone
Did you check all the likely places? Sometimes I dl it to my phone and forget what folder it went to.
Since you have cwm its no biggie. Just power down as ^^ and 3 finger to your recovery.
Sent from Bonsai 7.1.1.1
steviee7 said:
take out the sd card and just put it in another phone or on the computer and to the rom you want on it and then put it back in your phone
Click to expand...
Click to collapse
Thanks. That did get the zip to become available in recovery, but unfortunately, I got a message that the installation was aborted because it couldn't open syndicatefro110-standard-signed.zip.
Top Nurse said:
Did you check all the likely places? Sometimes I dl it to my phone and forget what folder it went to.
Since you have cwm its no biggie. Just power down as ^^ and 3 finger to your recovery.
Sent from Bonsai 7.1.1.1
Click to expand...
Click to collapse
I just got the phone today, so I'm not sure what "power down as ^^" means...
I would even suggest using the sd card adapter and copying the rom that way.
The Root said:
I would even suggest using the sd card adapter and copying the rom that way.
Click to expand...
Click to collapse
I'll try that.
Since you're new to all this... Check out my thread:
http://forum.xda-developers.com/showthread.php?t=1009997
qbking77 said:
Since you're new to all this... Check out my thread:
http://forum.xda-developers.com/showthread.php?t=1009997
Click to expand...
Click to collapse
Thanks. I've rooted before (HTC Hero), but a few things have changed. I'm now downloading both versions of the ROM I want direct to the SD card (via adapter) and will try to recover using one of them.
Squiggy45 said:
Thanks. I've rooted before (HTC Hero), but a few things have changed. I'm now downloading both versions of the ROM I want direct to the SD card (via adapter) and will try to recover using one of them.
Click to expand...
Click to collapse
Let everyone know how it goes and be generous with the thanks button. Always nice to see someone enjoy their device more.
The Root said:
Let everyone know how it goes and be generous with the thanks button. Always nice to see someone enjoy their device more.
Click to expand...
Click to collapse
Absolutely. And I'm glad to report that I'm back in business! Now it's time to research other ROMs and see which one I want to make my daily.
Squiggy45 said:
Absolutely. And I'm glad to report that I'm back in business! Now it's time to research other ROMs and see which one I want to make my daily.
Click to expand...
Click to collapse
Rumor of possible upgrade on SRF in days. Would be worth the wait.
The Root said:
Rumor of possible upgrade on SRF in days. Would be worth the wait.
Click to expand...
Click to collapse
If they're hinting at Gingerbread, I'll definitely wait.
Hey guys, about a week or two ago, I went to a T-Mobile store to upgrade to 2.3.4. I have been looking into rooting and loading CM7, but im not sure how to do it and what is the best way. I was thinking about doing it with ADB, but im just too chicken to try it. I can't afford to break this phone, so i have to be really careful. If you have any other better ideas as to how I could root 2.3.4, that would be awesome. Also, if you have found any way to unbrick it if it gets bricked somehow in the process, that would be great too. I am an experienced hacker, and am working on starting to develop apps for Android and Apple. Thanks guys, I really need your help.
There is no root for 2.3.4 yet
Sent from my HTC Glacier using Tapatalk
Please read the Wiki in my signature. It has all the guides you'll need.
Here
http://forum.xda-developers.com/showthread.php?t=1178912
Sent from my HTC Glacier using XDA App
Just want to note that that guide is not the solution for all Gingerglaciers. Some devices (mine included) cannot make it past the first step due to 'permission denied'.
Who else is in the waiting line for rootage?
AwesomeTurtle said:
Just want to note that that guide is not the solution for all Gingerglaciers. Some devices (mine included) cannot make it past the first step due to 'permission denied'.
Who else is in the waiting line for rootage?
Click to expand...
Click to collapse
how are you entering the first step, the reason i ask is because i had to help someone who entered it wrong once he followed what i told him it was smooth sailing
AwesomeTurtle said:
Just want to note that that guide is not the solution for all Gingerglaciers. Some devices (mine included) cannot make it past the first step due to 'permission denied'.
Who else is in the waiting line for rootage?
Click to expand...
Click to collapse
This says nothing about the quality of the solution, but rather means that you're not executing the guide correctly.
agrabren said:
* If you get a permission denied, we don't have enough access rights and can't exploit the device.
Click to expand...
Click to collapse
Just in case you all start getting condescending about people not pulling through successful with Ultimate Guide Deluxe. I am not doing it wrong and chances are I know a tad more about this process than you.
There are always chances. On the other hand, chances often lie. Read this:
http://forum.xda-developers.com/showthread.php?t=1185243&page=7
From post 62 downwards.
Then you can count your chances again, or post here about how you and some others missed the obvious.
AwesomeTurtle said:
Just want to note that that guide is not the solution for all Gingerglaciers. Some devices (mine included) cannot make it past the first step due to 'permission denied'.
Who else is in the waiting line for rootage?
Click to expand...
Click to collapse
I am. I'm not well versed enough to do the downgrade-via-ADB thing. All I want to do is temproot, freeze the bloatware on the stock 2.3.4. I'm not interested in flashing a ROM or having permanent root. From what I understand, this isn't possible without downgrading.
Tom Barrister said:
I am. I'm not well versed enough to do the downgrade-via-ADB thing. All I want to do is temproot, freeze the bloatware on the stock 2.3.4. I'm not interested in flashing a ROM or having permanent root. From what I understand, this isn't possible without downgrading.
Click to expand...
Click to collapse
No, it isn't possible. You have to downgrade and install pre-rooted 2.3.4.
It's not really that hard. You could start by trying to set up ADB, and if you get a working environment - you'll know that you're good to go with the guide.
Sorry to raise a dead thread, but I was just wondering if anyone had come across a 2.3.4 root method. I am trying to root my fiancee's device and seem to be getting nowhere.
Apologies also if this has already been addressed.
Thanks guys =]
The rooting method for 2.3.4 involves downgrading to 2.2.1. That's the way it has been, that's most probably the way it'll stay, for a long time, possibly indefinitely.
how to unbrick t-mobile htc mytouch 4g glacier
guys, i successfully rooted my friend's htc glacier mytouch 4g.i noticed dat the backup failed.then i tried flashing this ROM cm-10.1-20130710-Albinoman887-glacier.zip, it was successfully installed.i now clicked on reboot it just got stock on flash screen.i tried factory reset. but any time i clicked on it it takes me back to recovery mode.please help me.my friend is about to turn me to his enemy.
take out your battery, then out it back in
Hold the volume down button and the power button, select recovery (use the volume keys)
Then when your in there, do a factory reset, wipe cache and dalvik (if your using cwm then go to advanced then wipe dalvik)
Then re-flash the rom.
N_otori0us_ said:
take out your battery, then out it back in
Hold the volume down button and the power button, select recovery (use the volume keys)
Then when your in there, do a factory reset, wipe cache and dalvik (if your using cwm then go to advanced then wipe dalvik)
Then re-flash the rom.[/QUOwhen i click on factory reset, it boots into recovery mode.i have tried two different roms cm10.1 amd a cm7 but not the stock rom. please i need more help
Click to expand...
Click to collapse
daddydizzleman said:
N_otori0us_ said:
take out your battery, then out it back in
Hold the volume down button and the power button, select recovery (use the volume keys)
Then when your in there, do a factory reset, wipe cache and dalvik (if your using cwm then go to advanced then wipe dalvik)
Then re-flash the rom.[/QUOwhen i click on factory reset, it boots into recovery mode.i have tried two different roms cm10.1 amd a cm7 but not the stock rom. please i need more help
Click to expand...
Click to collapse
lol you wanna go back to stock?
Ok then, well look around for the PD15IMG.zip for 2.3.4 then put it on your sd card at the root, and then go into bootloader again.
Click to expand...
Click to collapse
N_otori0us_ said:
daddydizzleman said:
lol you wanna go back to stock?
Ok then, well look around for the PD15IMG.zip for 2.3.4 then put it on your sd card at the root, and then go into bootloader again.
Click to expand...
Click to collapse
aiit thanks.i would try it n get back to u tomorrow.downloading it right away.
Click to expand...
Click to collapse
daddydizzleman said:
N_otori0us_ said:
aiit thanks.i would try it n get back to u tomorrow.downloading it right away.
Click to expand...
Click to collapse
Ok, make sure you get the right one. 2.3.4
Click to expand...
Click to collapse
crazydrummer95 said:
Hey guys, about a week or two ago, I went to a T-Mobile store to upgrade to 2.3.4. I have been looking into rooting and loading CM7, but im not sure how to do it and what is the best way. I was thinking about doing it with ADB, but im just too chicken to try it. I can't afford to break this phone, so i have to be really careful. If you have any other better ideas as to how I could root 2.3.4, that would be awesome. Also, if you have found any way to unbrick it if it gets bricked somehow in the process, that would be great too. I am an experienced hacker, and am working on starting to develop apps for Android and Apple. Thanks guys, I really need your help.
Click to expand...
Click to collapse
Rooting is easy and safe i rooted mine last week and i don't brick my baby... Just take a giant step to follow the information carefully and read the pdf it helped me too.. And adb is easy to use just takes time.
Sent from my myTouch 4G
Perm Rooted
S-OFF
CM 10
using xda app-developers app