I applied all of the stuff mentioned by royalbloodvi in another thread here:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
So anybody, that finds those tips useful enough for him, should go with those. My problem was, that even when I applied all of the stuff, phone was still laggy, had some SOD's, sometimes turned off by itself etc. Since there is still no official note from SE about MR2, I was desperately looking for an answer. Creation of X2 subforum made my search easier, after browsing some topics, I gathered all the info, and to make it easier for you, I exposed it in this topic.
All the credits go to the topic starters in here, once again, I just gathered and compiled the info:
Xperia X2: How to change language (re-flash an Stock Spanish ROM), dreamcrawler for translation and originating tips, gbajzelj for the final idea and ultrashot and lollylost100 that provided the X2 software cabs.
***********************************
Procedure:
1) Open SEUS (SonyEricsson Update Service), start a new update. EVEN IF IT SAYS YOU HAVE LATEST VERS, UPDATE IT ANYWAY.
Another version: click on Start/Settings/System/Clear phone memory, enter all the needed info. It will put phone back into original state (MR1 - since you updated your phone to that version)
2) ONCE IT REBOOTS, CALIBRATION SCREEN APPEARS. RIGHT AFTER CLICKING ON THE CROSSES, IT WILL APPEAR THE SONY ERICSSON LOGO, AND IT WILL START APPLYING THE CABS. PUSH THE RESET RIGHT after it starts applying (hidden behind the stilus, opening the battery cover).
3) After rebooting, the Sony Logo will appear again asking to retry. Press NO. Well by default this will keep on showing up every time you restart the phone, and it will also reset your time & date setting to some time in March. But I found a solution for that. With registry editor of your choice, search for Launch190 (HKLM\init\Launch190\CustAppInstaller.exe). Delete that value, and phone won't ask you again if you want to retry the CABS instalation, also it won't change your Time & Date setting again!!
IMPORTANT: After that, phone returns to original WIN 6.5.2 state, without BUGGY SE stuff. At that point, phone is usable, stable and fast. You will have about 220 MB of free space on your phone.
Now you can go further by installing some of the SE stuff, but this is all up to you, since I don't exactly know, which one causes the problems (except for SlideView and TileWave panel, as was stated in some other posts). Grab the X2 Program cab's here: R1BA023_Original_Cabs
Put the extracted cabs on your SD card, insert it into the phone, and install stuff you want. I installed those packages:
SEMCFlashDeployment.cab
SonyEricssonDialer_1.1.0.996_vulcan_generic.cab -> New Vulcan Dialer
TaskManagerSetup.cab -> Task Manager, obviously
Camera_R109_RC1_38986.cab -> necessary for Camera
CommManagerCab.cab -> Communication Manager
FastGPSSetup.cab -> without this GPS won't work, at least did not work in my case
JMMS_Ver4.5.113_26Feb10_SE_PPC.cab -> reminded by rsx19, this one is needed for MMS
After installation of those, restart the phone. At that point around 200 MB of storage space is left, and around 120 - 130 MB of ram left. Although, it is not necessary to install all of those cabs (except for Camera, which I think is needed, unless you don't want to use camera ), it is all up to you.
Also, since you requested, I'll put down some of the cabs that are needed for different settings. But keep in mind, I am not sure if anyone of those cabs make any troubles or instability. So If you find any trouble or instability after some cab was installed, let us know and together we might find some useful solution.
Ok, to install some of the aditional setting in Setting menu, first install MyCPLSetup.cab, as I discovered, this one is neccessary for following CABS for various settings:
MobileData.cab -> for mobile data settings (HSDPA, ..)
ClearStorage.cab -> installs Clean Phone Memory
PhoneSettings.cab -> updates the Phone in Settings/Personal
SetupSNM.cab -> installs new Sounds & Notifications under Settings/Personal..
For the Illumination to work, install those 2 cabs:
IlluminationSvc.cab
PatternsSetup.cab -> SE Illumination Patterns, don't forget to restart phone after you install those two, and go back to Sounds & Notifications to set the illumination for various events.
After you install those cabs (not necessary to install them all, it's up to you) restart the phone and options will show up in Settings or desired category.
Don't forget, when you finish with installation of cabs, do a restart / soft reset of the phone, since some changes may not show until a restart / soft reset is done!
Using the phone with Windows Default theme, it runs smooth. Also battery life so far seems to be improved, but will have to run it few more days to tell the difference.
So far, my phone is lightspeed fast and, which is more important - stable!! You can now also try to apply settings, royalbloodvi provided in this thread - maybe you get even better performance:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
Ok, some are still having problems with SD cards being unrecognized or disappearing, here is the patch: SD Card Fix
Accelerometer based rotation:
If you loose the rotation during the setup of CABS, and you still want to use it, this is how you turn it back on: with registry editor open (HKLM\Services\MultiService\mods\Rotation\AccelBasedRotationEnabled). If your rotation is gone, this key has the 0 value. Change it to 1 and you get your accel based rotation back. I have yet to find out, which cab disables it!
I'd like that you people give feedback in here, which CABs are safe and needed to install apart from those I (originally gbajzelj) posted.
PS
I personally don't like the idea of stripping the phone down to the bone to make it work. If you buy a new car, it works as it was send out of the factory..you don't need to unscrew half of the engine, disable the steering, take out the seets to make it work. Same is with computers, just everything. But until MR2 comes out and hopefully repairs all the damage that was done with MR1, this is the solution for me.
Also thanks to everyone helping to make this phone less bugy and somehow usable
lyteo said:
...
I also installed SPB Mobile Shell 3.5.3, which works flawlessly on this fresh install.
...
Click to expand...
Click to collapse
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
spasoft said:
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
Click to expand...
Click to collapse
Hm, I tried and my GPS was also unresponsive, so I installed FastGPS and it helped!
its gbajzelj not gbanzelj ) np.
When i installed spb 3.5.3 and reloded weather info then when i turned off the phone and turned it on again the weather data was not saved and the wireless or data conscction did connect but did not load no new data from weather server. Skyfire did load the pages (the connection i guess did work) but spb shell did not load the weather data anymore.
i would also like if anione can make the camera button to open the camera app withouth the slideview. maybe a simple cab file just to set the camera button.
Sorry for typo
Does it ask you every time you restart the phone if you want to continue with setup?
If it does, did you notice that it resets the date? Thats a problem I'm trying to solve now Every time my phone restarts, date is set to 17. March -> maybe thats why your weather data is not reloaded??
For me, when I press the Camera button it opens the CameraApp. I installed only Camera Cab as you sugested, no SlideView, and it works!
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
It think you have to install MobileData.cab & MyCPLSetup.cab
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
lyteo said:
Looking into your answer right now...remind me, in which menu that setting use to be, I forgot already...
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
Click to expand...
Click to collapse
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
royalbloodvi said:
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
Click to expand...
Click to collapse
About the Time & Date bug, I think every time the phone starts as after I made MR1 update...so we must somehow find what is telling the phone that the software is not installed (if we trick the phone that is was fully updated and will not ask for retry at startup, this date & time bug will probably go away) - solution found, check first post
About missing things in Settings, I think it is all connected with MyCPLSetup.cab solution found, check first post
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
rsx19 said:
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
Click to expand...
Click to collapse
You don't need to reinstall, just check the first post, I updated it with solution for that - you just have to change one registry setting!
For Sound & Notification settings install SetupSNM.cab! For the Optical I have yet to find out, I'm doing my best, but can't be that fast I guess I did about 10 reinstalls and about 100 restarts of the phone today
awesome, do you know which one is auto time update
rsx19 said:
awesome, do you know which one is auto time update
Click to expand...
Click to collapse
You mean the Timezone tab in Phone settings? When it automaticly changes time due to time zone change?
In this case it would be:
TimezoneSvcSetup.cab
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
rsx19 said:
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
Click to expand...
Click to collapse
Maybe you know where that Auto Time Update setting was? And if you restarted the phone, after installation?
For the Illumination, check first post
Thanks for the reminder on MMS, will add it now!
For the settingspart1 & 2, I have to check don't know yet
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
X2 phone Signal Pick up Weak
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
rsx19 said:
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
Click to expand...
Click to collapse
Did you went back to the Sounds & Notifications and selected vibration? Becouse at the moment, only cabs I have installed are:
MYCPLSetup, SetupSNM, IlluminatonSVC and PatternsSetup, and illumination & vibration works for me. Or do a soft reset again, it might help.
nguyennghiep said:
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
Click to expand...
Click to collapse
Hm, don't know what your are your signal conditions with other phones, mine has a good signal and it does not matter, what I install..
illuminations work and all the settings are set, but still no vibe.
Related
Just getting to grips with my new mini after putting my XDA2i to one side - and it's slow as hell.
I've found some apps can take 20 secs or more to load - and I'm using the standard apps, with no tweaks at all. It’s completely unusable so I’m assuming something s wrong otherwise everybody would be talking about this.
I'm now resetting it to the basic install (Hard reset followed by a soft reset as the customisation is about to install) – I’ll post me results later…
Some other points:
- What an amazing box - better than opening a new Mac
- Why oh why do those f*ckers as MS STILL have to put us through a noob cut & paste exercise on every reset.
- Did anybody else get the basic/business/full O2 install options promised in the quick start manual? I never saw this option on startup.
So anyway, I've got an O2 clean machine, manually configured my connections, and surprise surprise, everything is (more or less) zipping along.
It’s noticeably more sluggish that the 2i, but that’s expected – now all I need is a third part app that will allow me to assign one of the hard buttons to the light so I have a handy torch on me – anybody got any ideas?
More great news – PocketTV is now available for WM5 – www.pockettv.com
You entertain me..... I don't know why, but you do
Oooo Pocket Tv for WM5
strongp said:
So anyway, I've got an O2 clean machine, manually configured my connections, and surprise surprise, everything is (more or less) zipping along.
It’s noticeably more sluggish that the 2i, but that’s expected – now all I need is a third part app that will allow me to assign one of the hard buttons to the light so I have a handy torch on me – anybody got any ideas?
More great news – PocketTV is now available for WM5 – www.pockettv.com
Click to expand...
Click to collapse
Agree.. please, hardware button to handy torch !!!!!!
strongp said:
Just getting to grips with my new mini after putting my XDA2i to one side - and it's slow as hell.
Click to expand...
Click to collapse
I'm having the same problem.
strongp said:
I'm now resetting it to the basic install (Hard reset followed by a soft reset as the customisation is about to install) – I’ll post me results later…
Click to expand...
Click to collapse
What is it you've done? Reinstalled the OS from a non O2 ROM or something?
I'll go have a look round, which will probably answer my question.
Rolo.
Rolo,
You need to do a hard reset (see the manual) – Once you’ve got the ‘press the send key to blatt everything’ message you need to press the green phone button, but don’t worry if you get it wrong as the other buttons don’t seem to do anything. (another triumph for the O2 technical authors). Then after going through the setting up process you will be told that the O2 extensions will be loaded in 5 seconds, - before it can do this do a quick soft reset (stylus in the hole, no keys pressed).
Then you will need to set up the network settings. In programs there is an application called O2, and in that you can ‘get settings’. This may do the settings for you – it’s worth a try, as you can always reset it again afterwards if you want.
Anybody know what this program does?
Thanks for the help. I'll give that a go . I found that disabling the MSN toolbar from the today screen made quite a difference to performance as well.
I find it hard to believe anyone could put up with it as it is. Bah.
Rolo.
strongp said:
You need to
Click to expand...
Click to collapse
Cheers. Job done, and now it's so much faster. (Hard reset was different in manual to wiki so corrected).
Then you will need to set up the network settings. In programs there is an application called O2, and in that you can ‘get settings’. This may do the settings for you – it’s worth a try, as you can always reset it again afterwards if you want.
Anybody know what this program does?
Click to expand...
Click to collapse
I've just tried it. Selected the only menu item which said "Get settings". A text message popped up at the bottom saying "SMS sent", but visibly it didn't do anything else. I've waited a couple of minutes to see if I'll maybe get a message back with the settings or something, but nothing yet. My network settings are blank.
I'll give it half an hour or something and have a look and see if I can find the settings. If it's simple enough for you to point me in the direction (UK 02) that'd be cool, otherwise no worries - I presume this is for GPRS type stuff?
Thanks again for you help.
Rolo.
I was also not given the different install options on first start up. However, i did a hard reset and not by the method in the manual which didn't work - there is a 'CLEAR STORAGE' option in system settings that works instead. Then on startup i chose BASIC install and the O2 UI was not installed. So much faster now - it was ridiculous before.
The key thing is that this way, you get the speed increase and you won't need to manually input all the settings. Much better
Dr Doom said:
I was also not given the different install options on first start up. However, i did a hard reset and not by the method in the manual which didn't work
Click to expand...
Click to collapse
I used what was in the PDF manual linked to in the Wiki which was comms+voice+reset. The Wiki originally said it was camera+voice+reset.
Comms + voice + reset didn't work for me. Tried it for ages. It's important people know this in case the hard reset doesn't work for them either
Dr Doom said:
Comms + voice + reset didn't work for me. Tried it for ages. It's important people know this in case the hard reset doesn't work for them either
Click to expand...
Click to collapse
its comms & voice (hold) + quick short press with the stylus reset.
Screen will then say press green key to reset.
Hi all,
I am aware about all the other threads but yet could not get across some nonsense on my MDA Pro.
I went back to the t-Mobile ROM because of german support on many features but running ozVGA now successfully with two exceptions:
1. Each time I reset the device, I have to reinstall vjbigphone (0.91) and re-run the .exe to get my dialer back to full screen. VJ did a real got job, but I hope anyone coud tell me, what could be wrong?
2. Does anyone know, how to get rid of the stupid and ugly video-button in the t-mobile dialer? I replaced all BMPs with the one's from iMate, but yet video is the stupid grey. flat button.
Once this is solved, I will write down exactly how to get really the tiny machine running with the best tools for best results.
Greetings
ndee
ndee: why do you have to re-install the app?
After a soft reset, what happens when you choose the "load and fix" option from the tray?
I am hoping to spend some time on this app over the next few days. Many apps being fixed, one a at time...
V
Hi Vijay,
when I softreset, everything on the phone is back to the tiny layout. Even though I "load and fix".
Only workaraound I figured out is reinstall :-(
ndee
Strange - I know we spoke about this before, but then, after you re-install it works?
Have you tried not loading VJBigPhone, soft reset, load the phone (eg press green key, so you can see Tiny buttons) and then load VJBigPhone. Does that make any difference? Re-installing shouldn't make any difference, it doesn't load any settings etc from the registry etc...
v
I have some similiar problems. I'm using also the neweset german ROM on my MDA Pro and after a soft reset I don't have to reinstall the app, but I have to close it and restart it again to gain access to the phone application. Without close VJBigPhone nothing happens, after starting the application again everything works fine (till the next soft reset, which happens every morning after the daily backup)
Wolfgang
I have an idea what might be the problem then.
The code was modified a while back to try to find the "phone" program without you having to specify the name in your own language (eg "telefon" instead of "phone"). However, it's possible that if the phone isn't found, it's getting confused. I'll try to look at the code again soon.
I'm not writing any new programs for a while while I do updates to all the old stuff
V
out of sudden, I dont need to reinstall anymore. Just after reset, I run vjbigphoneres and phone comes up full screen. Dont know what I did and how long it will last - keep you informed though - thx so far.
Any solution for the ugly video button of TM insight?
ndee
TM Button: I know you've spoken about it for a while, but I've got no experience of it, I don't really use my Universal I think someone (you?) posted one before, but could you send me a screenshot if you've got appropriate software, and if you have them, a zip of your extended rom?
V
[AX3L Tweak&Utilities] The simplest way to boost your device without making a ROM...
Hello to everybody!
Few moths ago I've edited a Trinity's ROM (AX3L v3.1.2.c) to speedup and boost my device...anyway I've left the "cooking" when my device jump to floor and become broken...
So, I have noticed that many people try to make their own ROM to boost their device (and adding some personalizations)....but making a ROM is difficult (not to much..) and need too time....
Some days ago, a friend ask to me to do a ROM for him (just to "optimize" his device), but I don't have so much time now for create and test it....
He tried some Customization-Tools, but some time don't understud what was done/which option choose/etc...
For this reason I've created a simply CAB installer to improove/optimize any WM5/6 Device...for newmbies or who don't want cookin' a custom ROM....simply install&play!
Here is the list of included tweaks:
. Disconnect GPRS/UMTS button and a timer display showing how long GPRS is in use for the session
. Max TCP Windows Size
. Max PIE Download = 8
. Low WMP background quality
. Live Search now use Google.com
. SMS Sent Notification is disabled
. Show Battery on top bar at Today screen
. Customer Feedback Service OFF
. SQM Service OFF
. Today Date Plugin on one line
. Menu animation OFF
. Removed (only when useless!) the scroolbars when read/writea SMS/Email/MMS/etc...
. Enable WiFi PEAP Authentication with privately signed server certificates
. All Security Restriction are OFF
. Ask where to install a program
. Keep CAB files around after installing
. Prompt before overwriting an existing installation
. Big font cache
. Enable file system cache
. Improoved battery life
. EDGE/UMTS/HSDPA icons enabled
. Enabled Purge Sim contacts when no Sim is present
. Vibra-feedback when press any dialpad's key
. Low Battery warning in now configurable
. OBEX protocol enabled
. Few settings
I have also included some programs found on this board:
. SoftKey setting applet
. MoDaCo's noData
. Sleuth255's SIP change
Click to expand...
Click to collapse
=================================
CAB #2: .NET FrameWork v3.5 Booster
This other CAB is for who have already installed or want install the ".NET FrameWork v3.5"
It simply speedup your device....
NOTE: IF you ALREADY have .NET FrameWork v3.5 on your device, simply install the CAB #2....BUT, IF you HAVEN'T already installed .NET v3.5, you must install it before install CAB #2 !!!
Click to expand...
Click to collapse
You can download the original .NET FrameWork v3.5 setup from HERE!
==================================================================
WARNING:
For some reasons, CABs #1 and #2 aren't UNInstallable. So, you "must" create a backup before install it in order to restore the default system!
.
Niceness.
So what changes does cab #2 change, if any?
good stuff bud....not to be one to stifle innovation and new things...I have to ask the simple question that immediately popped into my mind...How does this differ from Schaps Advanced Config?
Great idea
How do we know if we have the tweaks already in our custom rom. I am sure all roms use the net framework, but how would we know if the booster is setup?
Would we cause any problems if we install your cabs?
absorber786 said:
good stuff bud....not to be one to stifle innovation and new things...I have to ask the simple question that immediately popped into my mind...How does this differ from Schaps Advanced Config?
Click to expand...
Click to collapse
Umm, the fact that this is automatic and not manual
second cab just sets 3.5 as default .net...
same thing you may set by using netcfcfg.cpl
will be trying it right away.
good idea
nuke1 said:
Niceness.
So what changes does cab #2 change, if any?
Click to expand...
Click to collapse
You can make those changes manually, so you can even restore the default setting.
Key: HKLM/Software/Microsoft/.NETCompactFramework
Dword:
2.0.7045.00 -> Set to 0
3.5.7283.00 -> Set to 1
To revert the changes restore the original values.
xboxhaxorz said:
Umm, the fact that this is automatic and not manual
Click to expand...
Click to collapse
...for newmbies....my friend...or everybody that don't understand so much about WM optimization....
hs anyone tried this on the Rapael/Touch Pro?
As i have tried various tweaks to change the soft keys but they didnt work.
Regards
Rich
Tried it on my Polaris running udK's Syrius rom with Manilla 2D.
- All today items are gone (also Manilla 2D) except time/date which is the only item left in the list of selectable today plugins
- 3G keeps disconnecting and reconnecting every few seconds. The white "connection" dialog keeps poping up and is totally annoying.
The one fix I was after was about allowing custom certificates on PEAP auth for WiFi (we use that at work). Could you isolate that fix and give my a hint (registry etc)?
Thanks, going to restore now...
well, i installed it and it completely ****ed my system up. now on the today plugins menu in settings there is only one option and it's without text.. which is the date plugin.. other than that i have no today plugins.
(same as for pananza)
glad i didnt use it
Extracted the cab to see what's inside. Do you mind explaining what the following files are?
InTheHand.dll?
Custat.dll, Ceipui.exe - disable customer feedback I guess?
compse_sms.htm, compose_style.css, read_sms.htm, read_style.css - remove txt msg scrollbars (if not necessary)?
nir36 said:
well, i installed it and it completely ****ed system up. now on the today plugins menu in settings there is only one option and it's without text.. which is the date plugin.. other than that i have no today plugins.
(same as for pananza)
Click to expand...
Click to collapse
same here... and it wont let me un instal... pleeeeease fix this. i need my today screen back. i troed re instaling them and rebooting but there gone... my advice.
dont instal this yet its buggy
pananza said:
Tried it on my Polaris running udK's Syrius rom with Manilla 2D.
- All today items are gone (also Manilla 2D) except time/date which is the only item left in the list of selectable today plugins
- 3G keeps disconnecting and reconnecting every few seconds. The white "connection" dialog keeps poping up and is totally annoying.
The one fix I was after was about allowing custom certificates on PEAP auth for WiFi (we use that at work). Could you isolate that fix and give my a hint (registry etc)?
Thanks, going to restore now...
Click to expand...
Click to collapse
Try this cab guys...he had the \hklm\software\microsoft\today\items\ key with the today plugins from his own device included in the cab for some strange reason. This will definately fix the 'today items' problems...but other problems...you'll have to ask him
EDIT: If you installed his original cab...it probably screwed your today items settings which 'i dont think/know' how it can be restored...hard reset I guess?
And THANKS ALOT AX3L for an AMAZING set of tweaks...I can edit cabs so I can sift through and extract the tweaks I want...but for the average user who can't and wants to just install the cab...you need to do some work to fix up your CAB and make sure every tweak is compatible with 'most' devices
Or maybe you could just list out all your tweaks like this...cause it's not like any of these tweaks are secrets or your own...are they?
Thanks again!
Sean
sean222 said:
Try this cab guys...he had the \hklm\software\microsoft\today\items\ key with the today plugins from his own device included in the cab for some strange reason. This will definately fix the 'today items' problems...but other problems...you'll have to ask him
EDIT: If you installed his original cab...it probably screwed your today items settings which 'i dont think/know' how it can be restored...hard reset I guess?
And THANKS ALOT AX3L for an AMAZING set of tweaks...I can edit cabs so I can sift through and extract the tweaks I want...but for the average user who can't and wants to just install the cab...you need to do some work to fix up your CAB and make sure every tweak is compatible with 'most' devices
Or maybe you could just list out all your tweaks like this...cause it's not like any of these tweaks are secrets or your own...are they?
Thanks again!
Sean
Click to expand...
Click to collapse
im cdma. no sim card. i dont know how to backup my contacts. so i cant hard reset
sadoway said:
im cdma. no sim card. i dont know how to backup my contacts. so i cant hard reset
Click to expand...
Click to collapse
Are you serious? PIM Backup - http://www.pocketpcfreewares.com/en/index.php?soft=1806
Backup everything to your Storage Card
sean222 said:
Are you serious? PIM Backup - http://www.pocketpcfreewares.com/en/index.php?soft=1806
Backup everything to your Storage Card
Click to expand...
Click to collapse
ok... im dumb. first to say it. thats like the one noob thing i didnt understand
pananza said:
Tried it on my Polaris running udK's Syrius rom with Manilla 2D.
- All today items are gone (also Manilla 2D) except time/date which is the only item left in the list of selectable today plugins
- 3G keeps disconnecting and reconnecting every few seconds. The white "connection" dialog keeps poping up and is totally annoying.
The one fix I was after was about allowing custom certificates on PEAP auth for WiFi (we use that at work). Could you isolate that fix and give my a hint (registry etc)?
Thanks, going to restore now...
Click to expand...
Click to collapse
God....these are "few settings"....go to Setting -> Today -> Item and re-enable your plugins....
So, I've tested on Trinity and ELF using so many ROM version, and I never looked "3G keeps disconnecting etc..."
sean222 said:
Extracted the cab to see what's inside. Do you mind explaining what the following files are?
Custat.dll, Ceipui.exe - disable customer feedback I guess?
compse_sms.htm, compose_style.css, read_sms.htm, read_style.css - remove txt msg scrollbars (if not necessary)?
Click to expand...
Click to collapse
Yes !
hey guys , with the illuminator program i made some fancy visual effects when i open my keyboard for the X1 but other WM phones also have sound effects ive fiddled around with it a bit but couldn't yet get it to work.
i wonder if any 1 would wanna help me figure this out
i set up the registry directorys and entrys properly ,
sound files properly
and set up the HTC program with manages the sounds , all ok , but the device fails to make sounds when opened/closed
here are some stuff i came across and is worth to read if u decide to give it a shot or jump in
installing the program will set up most of the registry for u
http://pdaphonehome.com/forums/652344-post29.html
http://forum.xda-developers.com/showthread.php?t=336740
EDIT :
BUT this program turned out to work after proper settings and Soft -reset
http://tiermann.net/index.php?optio...cle&id=2:slidesound&catid=2:PPC Apps&Itemid=2
HAVE FUN
update :
some cool sounds for ya guys , check attachments also , mentioned threads
can't understand - can i do sliding sounds ONLY by fixing registry?
sliding out sound works perfectly, however the slide in causes an error.
not bad, but if it worked perfectly it would be better.
gundamboy said:
sliding out sound works perfectly, however the slide in causes an error.
not bad, but if it worked perfectly it would be better.
Click to expand...
Click to collapse
be sure to un-check "run program" box in the program , it gave me an error too at first , but after setting it up and soft resetting , its all good
@Ethermind
from my experiance u can only tweak it with registry when the device has it enabled by default
u gotta use the program in the last link of ur device doesnt have a sound like that naturally (like x1)
this is already out for the X1 i made a thread ages ago about it and it works great,
i even uploaded many sounds so why has this thread been made without searching first??
if you search slider sounds or even threads ive started you will find it, there is a cab file for this.
sod it here is the link to my thread and the location of the cab file needed for slider sounds install and also new slider sounds,
http://forum.xda-developers.com/showthread.php?t=469818
Jasand said:
this is already out for the X1 i made a thread ages ago about it and it works great,
i even uploaded many sounds so why has this thread been made without searching first??
if you search slider sounds or even threads ive started you will find it, there is a cab file for this.
sod it here is the link to my thread and the location of the cab file needed for slider sounds install and also new slider sounds,
http://forum.xda-developers.com/showthread.php?t=469818
Click to expand...
Click to collapse
yea i know i found it by searching but in this thread its more all here in 1 place , and if some 1 needs it and the new users dont know about it anyway
Note that when you go into the X1 camera app, it'll make the 'slide out' sound as the screen orientation rotates to landscape.
Further more, it'll 'slide in' when you exit the camera app.
Hello...
I have installed BSBTweaks 1.6 on my HD2, works great...
but then i recently tried adding apps to the rotated apps, and when it soft resets, the list isnt saved. I have read that this problem existed but was fixed in version 1.6
anyone else had similar problem, please guide me through, will be a great help...
thanks
PS: i tried adding office apps (word/excel) to the rotated apps list, that is what didnt work, i didnt try any other applications...
everyone...i am tired breaking my head with this for 2 days now...please help...
everything (version wise) looks fine with V 1.6 for bsbtweaks, also have framework 3.5 installed, but dont understand why the rotation isnt working...whenever i add an application to the rotation list, bsb asks for a soft reset and the application is still missing form the list when i recheck it...
please help...
hi, just had a quick google on this subject, and although i couldnt find anything specific i came across lots of posts saying it can sometimes take a short while for the registry changes to take, and if you reset immediately they can be lost, , , the upshot being to wait ten seconds or so before doing the reset (although ive never had any problems, and never heard of this delay before, so i think it very unlikely.)
Another thought that occured was try installing "CERegistry editor", run it, connect your phone, hit connection - connect and once you can see your registry, click 'tools - unlock registry'
Not sure whether its connected, but worth a try, eh?
Plus, if all else fails, you can use cereg editor to export the rotation white list key whilst you have bsb tweaks open and have applied teh rotation tweak, but before you reset, and make a cab from it, see if it works after being applied as a cab.
samsamuel said:
hi, just had a quick google on this subject, and although i couldnt find anything specific i came across lots of posts saying it can sometimes take a short while for the registry changes to take, and if you reset immediately they can be lost, , , the upshot being to wait ten seconds or so before doing the reset (although ive never had any problems, and never heard of this delay before, so i think it very unlikely.)
Another thought that occured was try installing "CERegistry editor", run it, connect your phone, hit connection - connect and once you can see your registry, click 'tools - unlock registry'
Not sure whether its connected, but worth a try, eh?
Plus, if all else fails, you can use cereg editor to export the rotation white list key whilst you have bsb tweaks open and have applied teh rotation tweak, but before you reset, and make a cab from it, see if it works after being applied as a cab.
Click to expand...
Click to collapse
Thanks Sam...
I have tried waiting for a while before doing the soft reset...
I will try to uninstall the BSB Tweaks and reinstall to see if that makes any difference...if not i will have no other option but do the regedit manually...
thanks for the help though ..cheers...!
Solved
Finally able to identify the reason for why BSBTweaks was not letting me add apps to rotate...
I guess the soft reset offered by BSBTweaks was not allowing the registry entries to be saved...so i didnt choose that reset option and instead did a manual reset by the power button...and when the phone started back, it worked...
so just make sure that we should add apps to rotate and do a manual reset instead of BSBTweaks reset...
thanks