hello, there
anyone has the same problem? and sometimes it's work sometimes not. i cant figure it out.
i know only 1 solution is holding the microphone straight to my mouth.
anyway, i juz test with other headset(not HD2's) and it's work...very loud
but i wanna know that problem's because of my phone hardware or headset.
thanks
actually i almost have the same problem
i bought my telephone form orange & the headset was working sso fine
but after i make the flash & change to cooked rom
the microphone didnt work at allllllllllllllll
go back to original.. again it were working soooooo fine
hope one of the expert here tell us whats wrong
thx for ur advice.
but i didn't cook my ROM
i bought it juz few day and found this.
so sad T_T
I have the 1.66 official rom and friends can no longer hear me with the headset plugged in. Where they could before on Oranges stock rom.
Related
The phone of my Qtek 9100 is working only with the cable hears but when I try to use it as a normal phone (directly in my hand), I can't hear anything and the poeple don't hear what i'm saying!!!
If i try to activate the HP during a phone call, I can't hear anything either!!!
I tryed to install the "QT_FR_9100_2170706_21707106_20710_180406.exe" again but it didn't change anything...
It was fully working and I install the full version of PocketMusic, since then I have the problem even after uninstalling PocketMusic and upgrade my ROM again.
Does anybody has an idea ???
PLEASE HELP !!!
I also tried the WMP and It's not making any sound until I user the earings plugged on the phone
Happened to a few people with wizards, may be a problem with the headphone jack - see this thread http://forum.xda-developers.com/viewtopic.php?t=46255
thanks... i'm trying the tips they are giving...
Hi there,
i'm stuck now with a very strange problem.
I was playing with the A2DP patch when i discovered that my prophet is making noise in the built in speaker when i'm receiveing or making calls.
After 2 hard resets (the Clean Data and the Camera/Comm buttons + reset methods), it's still the same. I can't use the phone as a phone!
Also same with headphones. It sounds like the volume is way too high. Almost unintelligible.
Only in Bluetooth it works correctly.
Any ideas?
It is a O2 XDA flashed with French QTEK S200 ROM, so of course waranty is gone
Help help help
Hi there.
Nobody had the same issue with his Prophet?
After some investigation, i came up with the idea that it was because i was using Wireless Stereo with an A2DP device, but it suddenly came back, and even with Bluetooth disables/devices deleted/unregistered from the phone, it's still the same.
I don't know what to do. I'm forced to use my Bluetooth headset to use my phone :?
I didn't try yet Hard Resetting my device, but the other day, when i wrote the previous post, it didn't help.
So, You, who are reading this, please give me some advices
I'm lost.
i have the problem in the other one, in the normal use the sound is sooooooo extrem loud. in the bluetooth mode works it perfekt.
nighty
Well, it depends how you see (hear) the issue.
I call this noise, but in fact it seems that the sound is pushed to the max. I can hardly understand the words people say to me through the built in speaker.
Maybe we have the same issue, but i call it "noise" and you say "extremely loud".
Do i understand well that you're living with this?
Did you also played with A2DP patch? Or is the origin of your issue different?
Personnally, i'd like to find a solution.
yes i played with A2DP patch and i wont life with this probelm.... i send mails to www.qtek.ch, www.swisscom.ch, www.daanguard.ch, www.teleservice.com and a lot of other Qtek supporters.....
in this moment i use only bluetooth for all calls. but this ist not really a final solution.
nighty
Good,
i don't feel alone now
If one of them answers you, please let us know on this thread.
Maybe there are also other people with same or similar issue that are too shy to say it here
They'll like also to know how to fix.
I can't believe we're just 2 with this issue :roll:
Nightly,
did you have an answer for all the emails you've sent?
I'm planning to flash an O2 ROM back to the XDA Neo and sent it to repair, but if you've found the solution, i'd be happy to read it before i go to Germany.
nighty said:
yes i played with A2DP patch and i wont life with this probelm.... i send mails to www.qtek.ch, www.swisscom.ch, www.daanguard.ch, www.teleservice.com and a lot of other Qtek supporters.....
in this moment i use only bluetooth for all calls. but this ist not really a final solution.
nighty
Click to expand...
Click to collapse
Hey, i was wondering did u ever find a solution for this problem as i have not 1 but 2 prophets with this problem thx
Hi everybody, first please excuse me for my poor english, I come from south of France..
I explain you my problem:
Since somethin about 1 or 2 month, the both speakers of my PDA (external and the speaker to listen to the conversation while calling) doesn't work anymore..
And the microphone doesn't work too.
It does like if I had headphones plugged but it's not the case.
The phone never falled and change the rom or the radio rom didn't fix the problem.
I think it's a bug in the hardware but I don't know, so if you please could help me!
I thank you.
does it work with a headset?
many people report this hardware malfucntion
many solve it by plugging in and pulling out a audo connector
sooner or later the headset detector seem to fall back into place
Yeah it's work with headset and with bluetooth headset..
I remember that I tried this before but I will try again!
Edit: but doesn't exist a file like "headset plugged on" or whatever in the registery?
I have to say that i'm glaaad!!
In fact i opened my ppc, and after 5 tries, I have reajusted the jack in its place... ...and it's work now!!! All works like before my problem..
So for the person who have the same problem it's simple to fix it (with precautions)!
Hi All.. I posted this in Energy thread in deveopment but I think it is more suited to be answered here... anyone please help before my friend defects back to Apple!
adamelphick said:
OK Strange one here - hope someone can help!
I flashed older cookie on to HD2 for a friend and took phone to her in Malaysia - all seemed well but phone was freezing apparently so her brother went to HTC asia site and downloaded a ROM for it! GRRRR
Anyway it was a T-Mobile rom or something with a '51' radio. Since then when she makes a call she can not hear the other person through the earpiece (but can through the headset!) , but CAN hear a busy tone if the person is already on a call when she calls!
So I flashed latest Cookie Dinik style back on and replaced the Radio with 2.07.50.** and still the same!
I don't understand how the earpiece can make the busy sound but not hear the voice, yet headphone works?! I have connected remotely and used MyMobiler to see screen of HD2 and looked for anything that may be causing it but all seems fine.
If anyone has any ideas please help as she is about to go back to an iPhone after just moving to this HD2 on my say so!
Click to expand...
Click to collapse
hmm thats an odd issue and I would be suprised if anyone else has encountered it :S
are you positive its the ear piece speaker thats making the busy sound and not the loudspeaker on the back of the device?
also have you tried swapping between loudspeaker and normal handset mode? does the call work in loudspeaker mode but not normal speaker mode?
Xp3RiM3nT said:
hmm thats an odd issue and I would be suprised if anyone else has encountered it :S
are you positive its the ear piece speaker thats making the busy sound and not the loudspeaker on the back of the device?
also have you tried swapping between loudspeaker and normal handset mode? does the call work in loudspeaker mode but not normal speaker mode?
Click to expand...
Click to collapse
Good idea with the loudspeaker mode - will ask her to check that. Can't see how a rom flash could cause it - hope it's not faulty hardware!
I had a similar problem with my HD2: I wasn't able to hear my counterpart. I have tried several radio/ROM combinations with no luck. Looking at the test results I guessed it was a sporadic hardware issue of the earpiece. Sent the phone off to service, they confirmed the problem, replaced the earpiece and shipped it back, all free. Great service!
Of course, I had to restore to factory settings beforehand, including the original SPL, radio and ROM. If the phone is still under warranty I would suggest you try a hardware repair.
hi there
i have a Hermes, exactly the T-Mobile version..
anyway it worked fine till one day i got no sound at all, no mp3 no notifications, nothing....
except the boot up sound... checked the forums, seems it's a common problem, and i figured that the rear speaker works (since the boot up sound comes from it), the speaker cable is connected so i have no clue... if it would be broken, than the boot-up sound wouldn't come at all from the rear speaker, riight?
changed like 5-6 ROMs so far, from 6 to 6.5, no changes with sound...
any clue guys what to do?
I'd need to solve this asap...
thx for any solution
can please someone at least confirm me if my rear speaker is dead or not?
cos i hear the boot up sound from it but no other sounds...
please ,its urgent, thx
Well, the first thing that i would consider doing is backup my important data and do a hard reset....why don't you try that too....?
okay
got from ebay a new speaker... changed it and it doesnt work either...
hard reset and changing the ROM (6-7 of them) didn't help...
at beginning the sound could be heard at boot only while playing music, ringing and that stuff was mute... after 2 days the sound at boot disappeared too...
so, does anyone have a solution? when i plug the microUSB to 3.5mm adapter i can hear the sound on my earphones, but there is no sound when played normally on the ppc itself...
can anyone help me to solve this? where could be the problem?
thanks
okay...
going mad really... now i flashed an original AT&T US rom (although i have a tmobile EU) and guess what.... i hear the sound back again, but only at boot up... other sounds in winmo (ring, mp3, music, programs) are dead... can't hear anything although the volume is set at max...
so... i assume this can't be a hardware issue..
before this ATT i changed like 6 more different roms and all with same problems... now i have sound only at bootup... does anyone know where is the problem and a possible solution?
thanks
cmon guys... don't tell me no one has no idea what to do.....
i've been flashing and reflashing the roms but so far i can get only the boot up sound... any other sound is not available.. why? how to repair it?
thx
it's funny to see you can ask sometimes questions no one knows to answer
you've tried it by using the head set...?
whether the results were the same as well (no sound)..?
when using a headset (extUSB) there is sound and everything is normal...
Papcina said:
when using a headset (extUSB) there is sound and everything is normal...
Click to expand...
Click to collapse
you'd better check the speakers on your device , may be the connecting cable is damaged and if necessary you replace ....
I have the same problem here!!!Have you fixed that??Can you suggest me something, please???
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
nonsuchpro said:
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
Click to expand...
Click to collapse
you see in the WIKI, because there is described several ways to increase the BT A2DP sound quality and sound notification by Changing the Registry