can you tell me please what frequency of wifi n draft does the hd2 support ,as iam going to buy a new n router soon
any one , please
not entirely sure here but i think most wifi n capable routers will have options for both.
Hi hoss_n2
The HD2 only supports the 2.4Ghz band or 802.11b/g (54Mbps max)
802.11N capable Wifi routers will come in two flavors, ones that use the 2.4Ghz band only and ones that use both 2.4Ghz and 5Ghz.
The devices that use both band are far superior to the single band 2.4Ghz especially when talking 802.11N
The main reason for this is "N" capability for channel bonding
So really any wifi router should support the HD2
loopee said:
Hi hoss_n2
The HD2 only supports the 2.4Ghz band or 802.11b/g (54Mbps max)
802.11N capable Wifi routers will come in two flavors, ones that use the 2.4Ghz band only and ones that use both 2.4Ghz and 5Ghz.
The devices that use both band are far superior to the single band 2.4Ghz especially when talking 802.11N
The main reason for this is "N" capability for channel bonding
So really any wifi router should support the HD2
Click to expand...
Click to collapse
first thanks for your reply ,second can the dual band router be adjusted for only 5ghz ,and which frequency is better
I'm pretty sure (95%) that there is a reg tweak to enable 802.11n (it's disabled originally cause it drains battery very fast).
Related
Hi,
I have a UK Desire Z. The spec says the phone is capable of connecting to b/g/n wifi standards. However I am having trouble seeing my N network on the wireless list. Has anyone sucessfully connected thier phone to an N network?
Are you trying to connect to a 2.4hgz network or a 5ghz one?
It should work on the 2,4 but not on the 5 ghz
I have dual-band router and Desire Z does see/connect to 2.4GHz N network. It does not see 5GHz network. But my 5GHz is running in two channel 40MHz mode, didn't have time to check if switching to single channel would allow Z to connect.
Mine connects fine to my home Wi-Fi network, which is 'N' standard. Not sure what speed it is connecting at, or whether it's dropping back to B/G though.
Do you have MAC address security blocking set on your router, and if so have you told it about the phone's MAC address?
Andre
buzmay said:
Are you trying to connect to a 2.4hgz network or a 5ghz one?
It should work on the 2,4 but not on the 5 ghz
Click to expand...
Click to collapse
This is the answer to the thread.
schriss said:
I have dual-band router and Desire Z does see/connect to 2.4GHz N network. It does not see 5GHz network. But my 5GHz is running in two channel 40MHz mode, didn't have time to check if switching to single channel would allow Z to connect.
Click to expand...
Click to collapse
This verifies that answer, changing to single channel on 5GHz will not make a difference.
The wifi radio on the DZ is a 2.4GHz radio.
So I just set my routers wifi mode to 300Mbps @ 2.4Ghz and immediately was not able to connect to my wifi. I dropped the mode down to 145Mbps, same frequency, and right away was able to connect. What gives?
onishchuk4 said:
So I just set my routers wifi mode to 300Mbps @ 2.4Ghz and immediately was not able to connect to my wifi. I dropped the mode down to 145Mbps, same frequency, and right away was able to connect. What gives?
Click to expand...
Click to collapse
I'm not networking expert but i believe it's the b/g/n radio that you are using. IIRC the faster setting requires the n radio. Does you phone & ROM support n?
If i am wrong someone please correct me.
My router is dual band and i want to say it connects to 5ghz and connects as a n connection. some roms do not have the n drivers. I too could be wrong.
tw39515 said:
My router is dual band and i want to say it connects to 5ghz and connects as a n connection. some roms do not have the n drivers. I too could be wrong.
Click to expand...
Click to collapse
You're probably right. I'm using CM7.1.
I have tried connecting my tablet to a wirless N connection but it doesnt pick it up. Anybody have this problem or know how to connect to a wireless N connection on the tablet?
sakobatoneko said:
I have tried connecting my tablet to a wirless N connection but it doesnt pick it up. Anybody have this problem or know how to connect to a wireless N connection on the tablet?
Click to expand...
Click to collapse
I haven't tried it, but I believe it'll only work if the Wireless N Network is the 2.4GHz mode. The specs for the TPT say it is compatible with b/g/n, since a isn't supported the 5GHz spectrum cannot be supported.
If your router is simultaneous dual-band, meaning, it can transmit a 2.4GHz and a 5GHz network at the same time then you shouldn't have any issues. If the router is only dual-band and not simultaneous then you'll have to fall back on the 2.4GHz spectrum.
Hope this helps.
Oh, ok. The router was transmitting in 5ghz; changing it to 2.4 worked.Thanks
I have a i9505 S4, it does not seem to be able to find the 5gHz network whereas on the iPhone 5, i am able to connect to the 5gHz network. Both 2.4 and 5 gHz network have different SSID names.
JoshuaLow_ said:
I have a i9505 S4, it does not seem to be able to find the 5gHz network whereas on the iPhone 5, i am able to connect to the 5gHz network. Both 2.4 and 5 gHz network have different SSID names.
Click to expand...
Click to collapse
Change to different channel in 5ghz and try, 36 or 44 channel.
5G wireless
JoshuaLow_ said:
I have a i9505 S4, it does not seem to be able to find the 5gHz network whereas on the iPhone 5, i am able to connect to the 5gHz network. Both 2.4 and 5 gHz network have different SSID names.
Click to expand...
Click to collapse
Me too, I9500 no issue with this, but I9505 can't search for 5 Ghz wireless network, chg router channel still the same. I 'm using Netgear R6300.
Same issue here
I had i9190 and it was working great. Now I have tried two i9195 and one i9192. Both i9195 only work on 2.4Ghz and do not show 5Ghz bands at all. I9192 could not connect to any network, DOA. All phones had 4.2.2 update so it was not software issue. I guess samsung started to block 5 Ghz band on i9195.
My oneplus 6t has issue in picking up the 5ghz signal from my router. It always connects to the 2.4ghz band when i go farther from the router but never switch back to 5ghz band. To put it simply, when i go to balcony, the 5ghz signal is very weak and onplus 6t is automatically switching to the 2.4ghz band but when i come back into the living room (where the router is), my 6t doesn't switch back to 5ghz. Hence slow speed and its kinda annoying. Is there any possibility to force my 6t connect only on 5ghz band.
note : my router has the option of disabling the 2.4ghz band but i cant do that because few of the devices are old and only have 2.4ghz band.
On the router you could set up one access point SSID using onky the 2.4 frequency and a separate SSID using only 5 GHz. Connect older devices to the first one and your 6T to the second one. My ASUS router supports this kid of thing; Netgear router I had before would do this also.
I'm not aware of a way on the phone to only use one frequency.
Sent from my ONEPLUS A6013 using Tapatalk