Related
Hi,
I would like to if possible to update my xda rom to a wm2003 rom, so i can use windows voice command.
Please can someone let me know which rom is best to use for stabilty and userablity..
Also instruction how i update the rom once i have got it??? and any advice you can offer during the updating process??
Many Thanks
Zetex
http://www.xda-developers.com/XDAtools/
the different guides here should be plenty of help
here is something i copy'd from this site at one poit
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
BTW the above is based on using XDArit version 1.0 which can be download from the software section at:
http://www.yorch.net and a PCI USB 3-One Travel Flash reader P/N FPT-D bought at Fry's.
Click to expand...
Click to collapse
The 4.01.00 ENG version is here ftp://tmobile:[email protected]:21 ..
but be careful as it contains the upgrade for RSU and I 'm not sure
it supports 900/1800 or not since it's TMO upgrade.
If your device has no Radio problems (GSM),
my advice would be to down load the file, use Winzip or WinRAR to
extract the NK.nbf file which the ROM upgrade, put it on SD card and flash your XDA using the bootloader.
PS: if you are sure that your network is 1800 MHz then do NOT use R6.24 for RSU upgrade.
Good luck
Click to expand...
Click to collapse
anyway i would get a sdcard and a sdcard reader the price is not all that high for any of them
Hi m8,
Thanks alot for all the information you have given me, I have a 256mb sd card and a card reader in my pc, so i should be ok there....
Which rom would you use or have if you were going to put pc2003 on your xda m8???
Thanks alto
zetex
not sure prob the latest 4.01.00 ENG
and be very sure that it were only the rom and not the
radiostack i were upgrading since i seem to recall that 4.01 is US gsm
but i'm not sure i'm upgrading untill i get more tired of messing with 2002 and what applications i like
then i can complain more about the applications which i really really love and need but dont work with 2003
plus people still report issues with 2003 deleting their sdcard for no reason
so if you give it a go be sure to not have infomation on your sdcard which you dont have back'd up so you can get them back if it mess up
Hi m8,
Thanks once again for your help...
I only really wanted it updated so i can use microsoft voice command, do you know of away of getting this to work on pc2002 o/s?? as i would really like to use this program for when i'am driving around with my job....
any idea's m8
Zetex
sorry no havent messed with voice command at all
i feel strange enough talking about talking on the phone using the
handfree
i get a strong feeling people still think i'm talking to myself
zetex said:
Hi m8,
Thanks once again for your help...
I only really wanted it updated so i can use microsoft voice command, do you know of away of getting this to work on pc2002 o/s?? as i would really like to use this program for when i'am driving around with my job....
any idea's m8
Zetex
Click to expand...
Click to collapse
u really dont have a choice u hwav to upgrade to 2003 for that proggy... wait a couple of days we might be lucky and siemens might release the official version (the tentative date is jan 30) if no then there is another thread u can get the fpt address and download version a.30.17 the lates beta version of the att rom2003 version and install that...
all the best also i use the voice proggy and love it start apps with a click of a button and call /see contacts easily... now they need to do is covert voice to text so i dont have to transcribe )
rc,
your making me drool!!!!!! its suppose to be brillant proggy, what rom are you using on your xda...
And if i put a beta pc2003 rom onto my xda will a be able to downgrade and upgrade at a latter date...
Also whats the best file for O2 in the uk???
Thanks alot
Zetex
zetex said:
rc,
your making me drool!!!!!! its suppose to be brillant proggy, what rom are you using on your xda...
And if i put a beta pc2003 rom onto my xda will a be able to downgrade and upgrade at a latter date...
Also whats the best file for O2 in the uk???
Thanks alot
Zetex
Click to expand...
Click to collapse
on a later date it will definately be an upgrade as this is still a test version i am using.
not sure about the UK ? as i am new in here myself. look for another thread in this same forum for "looking for testers for a.30.17 att wireless" or something like that read thru and u will see..
as fort me i am using that test versionis much better than the cooked 4.00.5 i was using earlier
alrite mate use vA.30.07 AT&T test rom newest out and its bluddy brill works like a dream cant wait to get the propper update should be cool
its very fast and seems extreamly stable v4.01.00 is stable but is soo slow and seems to make tomtom 2 run slowly as in takes about 3 minutes to start up ect...
get the vA.30.07 rom from here: http://forum.xda-developers.com/viewtopic.php?t=5492&start=25
worth getting imo
gaz
Gazzaman2k,
Thanks alot m8 for the pointer, people are very helpful here. Starting to learn quite quickly....
With this being a US rom will it be alright on mu UK Xda? and will this rom be ok for my UK O2 phone calls???, are they both in the rom for download???? and how would i install it onto my xda??
lmk m8
Zetex
zetex said:
Gazzaman2k,
Thanks alot m8 for the pointer, people are very helpful here. Starting to learn quite quickly....
With this being a US rom will it be alright on mu UK Xda? and will this rom be ok for my UK O2 phone calls???, are they both in the rom for download???? and how would i install it onto my xda??
lmk m8
Zetex
Click to expand...
Click to collapse
On your xda you have 2 things,
the rom, thats your operation system, now pocketpc 2002, you wanted to update it to windows mobile 2003.
And you have the radio rom, this is the "operation system" for your cell phone part of your xda.
If you update to A.30.07, the windows mobile 2003 beta, you leave your radio rom in tact, so you can continue making calls
Also, watch out for those updates what are programs,
because the also update your radio rom,
better use a .nb1 file with xdatools
Hi,
reading with interest,
Zetec is asking most of my questions for me - but one that I'd like to add:
Does the ppc2003 upgrade allow you to control the phone and the pda volume separately (as per the xda II)?
Thanks
xdardd said:
Hi,
reading with interest,
Zetec is asking most of my questions for me - but one that I'd like to add:
Does the ppc2003 upgrade allow you to control the phone and the pda volume separately (as per the xda II)?
Thanks
Click to expand...
Click to collapse
yes, I have one slide bar for the phone and one voor the os (music, alarms, etc)
yup dual volume controls also on v4.01.00 it has a tab called band showing 1900mhz or 900mhz this means you then have to loose 1800mhz (but can be brought back in bootloader) on the vA.30.07 there is no tab like this so in other words no need to go into bootloader so you wont loose your 1800mhz
so vA.30.07 is great for countries using 900/1800
gazzaman2k,
I updated the rom last night everything is working just fine, very nice and it runs very smoothly as well.
I have put Tom Tom 2.24 and that seem to work as well, and the speed is great
Just one question what gps driver is best to use because i'am only getting a couple of bars on the gps status???
Also on the phone side i'am getting on my desktop an AT&T WIRELESS tab??? is that right...
And finally what can i use for closing programs from the desktop, making sure they close by tapping the X in the courner of the screen. Because when i close a program they still remain in the programs running under memory tab...
please let em know
Thanks alot
Zetex
zetex said:
gazzaman2k,
I updated the rom last night everything is working just fine, very nice and it runs very smoothly as well.
I have put Tom Tom 2.24 and that seem to work as well, and the speed is great
Just one question what gps driver is best to use because i'am only getting a couple of bars on the gps status???
Also on the phone side i'am getting on my desktop an AT&T WIRELESS tab??? is that right...
And finally what can i use for closing programs from the desktop, making sure they close by tapping the X in the courner of the screen. Because when i close a program they still remain in the programs running under memory tab...
please let em know
Thanks alot
Zetex
Click to expand...
Click to collapse
att wireless in today... u seeing it because this rom is from them and they force it in there, no biggie go to the today - items screen in the settings and uncheck it it will be gone,
as for the programs remaining in the memory that is how the OS has been for a while get aversion of POCKETNAV from Scott seligman woreks well to move around the OS and helps u close unwanted proggies
http://www.scottandmichelle.net/scott/cestuff.html
also the GPS thing isnot a driver issue it is WM2003 feature ( or drawback u may call it) that the signal meter is poor... it is only the display that is poor the signal strength when u see one single dot is about 40% (i tried the trial version of ipdashboard which will tell u in numbers what the strenght is) so just live with it....
hope it answers most of the ?'s
yeah windowsCE have always mixed the alt tab kind og closing with normal closing i asume that it's to make loading faster if you often use the same stuff
it's a good custom to force programs down once in awhile because if you played quake 1 or 2 and then pacman and the deside to listen to mp3 it's going to sound crack smack and pop
Thanks alot for all you help, you have all been very helpful and i now have a xda1 with wm2003 test rom on it....
oh and not forgetting voice comand, very nice app
just one thing i have notice the radio i have installed is 4.20 could i put 4.21 on it and if so how..
Also when i press the volume button on the side and in some apps the box for highlighting a feature or missing but the function works as if its there... is this just because its a test rom???
Thanks once again, i'am now very much enjoying my xda because of people on this board..
Thanks
Zetex
Zetex, glad to hear the upgrade went succesfully!
Did you use the SD card method described earlier in this thread?
Is your UK 02 phone the version with the 32Meg Rom or the 64?
If it is the 64, does anyone know if the beta ROM fits into the 32 Meg version.
Any news as to whether the final version has come out yet?
Thanks
xdardd
hi evryone..
im using currently windows 6.1 by ranju build 19199.1.0.2
R 1.11.00
G 42.45.p8
D 2.07.40 RAN
my problems are:
1.i cant get online thru wifi.it cant seem to search available conections.
2. i cant use 3g
3. i seem to have less memory than before i changed to ranju(or maybe im too noob to know)
i want to know is there a need to upgrare my radio,wuts the latest, wuts its for.which is the best for malaysia.help plz anyone.thank you
zeals01 said:
hi evryone..
im using currently windows 6.1 by ranju build 19199.1.0.2
R 1.11.00
G 42.45.p8
D 2.07.40 RAN
my problems are:
1.i cant get online thru wifi.it cant seem to search available conections.
2. i cant use 3g
3. i seem to have less memory than before i changed to ranju(or maybe im too noob to know)
i want to know is there a need to upgrare my radio,wuts the latest, wuts its for.which is the best for malaysia.help plz anyone.thank you
Click to expand...
Click to collapse
Some advice:
1. Read the wiki - it has a HTC Universal section....
2. Use the search tool to go through Ranju's thread
3. If you still can't find the info, post something in Ranju's thread
To answers your questions:
1. a) WPA (Enterprise) does not work with the Universal in WM6
b) WPA-PSK (Personal) may require your to turn the wireless on and off a number of times before it connects
2. If you look in the phone settings (Settings->Personal->Phone) under the "band" tab you will notice that it is set to "GSM" (change this to "Auto")
3. Different ROMs use different memory. Ranju's ROM also has WkTask and the system tray icons that run at startup - this may be eating some extra memory
I may have answered your questions, but please follow my advice!
Enjoy!
I want to upgrade my ppc to WM6 but I want to save my sms and contacts and load them to my ugraded rom.
Whats the way to do this?
I also want to ask, I have repaired my imei 2 years ago.
If I upgrade it to WM6 with a newer rom , could it cause a problem?
My rom version :2.13.9.23 WWE 2/23/06
radio : 02.69.21
protocol : 4.1.13.30
extRom : 2.13.9.123
Another problem is,
I forgot the password of ActiveSync , how can I disable it?
alpercan said:
I want to upgrade my ppc to WM6 but I want to save my sms and contacts and load them to my ugraded rom.
Whats the way to do this?
Click to expand...
Click to collapse
Alpercan
download pimbackup from this site. you can backup your contacts, email & sms with it to put back on once you have flashed.
Suggest you dont backup system data as you cannot restore this safely on a newer os.
look at the good guide on upgrade section, i recomend lazy tools way.
Ur device is not network locked? so u should be ok.
If you ensure u have an original wm5 rom you can always flash this as a backup if flashing to wm6 or 6.1 goes wrong
good luck and welcome to flashing.........
Hi Timmy,
I backup cotacts sms and emails with pimbackup.But I have doubt if WM6,1 wont recognize this backup.
My ppc all unlock, CID etc.
Could the rom updating corrupt imei area?
And the last famous question which rom should I install??
alpercan said:
Hi Timmy,
I backup cotacts sms and emails with pimbackup.But I have doubt if WM6,1 wont recognize this backup.
My ppc all unlock, CID etc.
Could the rom updating corrupt imei area?
And the last famous question which rom should I install??
Click to expand...
Click to collapse
When you upgrade to cooked 6.1 it will more than likely have pimbackup on it, if not install it. You will have no problems restoring ur contacts, email etc (system data & settings is the only problem so dont use it). I have used this method and there was no problem.
Im afraid i cant answer your imei querie, your best asking a mod (l3v3y is very knowledgable )
As for active sync password, do you mean the unlock code to get access to your device when its turned on? Ive not seen active sync with a password before. Im sure a hard resest would get rid of this password, but if your going to flash a rom, dont worry about it, it wont be there after your flash.
Ha Ha.... best rom? famous question..... There are many good roms out there. It is purely personal choice. Do you want a clean one (max speed and free storage) which you can then add the applications you want, or do you want a full one (maybe a little slower but not much) which comes with a lot of apps cooked in. Disadvantage of full rom ? - apps are always being updated and if apps are cooked in you cannot unistall them to then update them. So i guess you have to read up on the roms and decided.
Look for roms from l3v3y, varanusvincent, gullum, dioxda 2, all great chefs and have released many good roms.
Try a few and test them, only one way to find out. U'll find u cant stop flashing and testing when you start.
Read the good guide on upgrading section (the stickys). THis one is good too : http://forum.xda-developers.com/showthread.php?t=377904.
I assume you are upgrading from wm5 original rom, so spend a few hours reading, belief me its worth it
Have fun!
ps let me know how you get on with imei thing, i want to know too, you can never know too much!!!
Thank you very much Timmymarsh,
I updated the rom to Prophet Diamond and I ll try different roms as you said.
restore my data to new rom.
alpercan said:
Thank you very much Timmymarsh,
I updated the rom to Prophet Diamond and I ll try different roms as you said.
restore my data to new rom.
Click to expand...
Click to collapse
No problem
Was the imei thing a problem in the end?
No , imei is ok too.
Do all the programs for wm5 compatible with wm6.1 ?
alpercan said:
No , imei is ok too.
Do all the programs for wm5 compatible with wm6.1 ?
Click to expand...
Click to collapse
Mostly in my experience. You may get a message that "this program was designed for a previous version and may not display properly) but generally they work fine, you may just not have a full screen or some text isnt shown.
Afraid thats a "try and see" experiment too my friend
First of all I would like thank Skywing for writing this GPS Application
Gateway for the xv6800 phone with stock rom or upgraded MR1 rom..
This thread is to show my thanks and to help new ppl like myself
find this app easer.. It took me about haft a day searching two forums
just to find what I was looking for .. so I hope this will help other
new ppl find what they are looking for much easer ..
Again this application was written by “Skywing” and someone wrote
the easy install CAB for his app .. also like thank “gc14“ for writing
the tutorial ..
This Application aGPS aka GPS Server aka (Valhalla Legends GPSServer.cab)
Will allow your 100% stock rom or MR1 rom on your xv6800 Phone
to access GPS signal via 3rd party application e.g. MS Live search, Google maps etc..
without the need to unlock the phone or do anything to the phone other than
simply loading the GPSServer.cab file ..
For step-by-step install info. go to: http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
To download the CAB go to: http://rapidshare.com/files/165096506/Valhalla_Legends_GPSServer.cab
Show your thanks to Skywing, go to his thread: http://forum.xda-developers.com/showthread.php?t=424387
I have personal testing this code on my xv6800 with stock ROM, then I
upgraded to the MR1 ROM from HTC for the xv6800 with WM 6.1 and
install the GPSServer.cab and it works perfect for both ROMs without
doing any unlocking or running anything else other then just the GPSServer.cab
BTW for anyone with the stock ROM running WM 6.0 and would like to
upgrade to Windows Mobile 6.1 .. you can download the MR1 ROM direly
from HTC
Again this is the, Verizon XV6800 ROM MR1
Release Date: 2008-08-23
go to: http://www.htc.com/us/SupportDownload.aspx?p_id=82&cat=2&dl_id=99
If this link does not work you may need to set your “country” first, (top right of the page “select country” set to “United States”
wow .. update: also found out that gc14 made the CAB file as well..
Thanks again gc14
gc14 post: http://forum.xda-developers.com/showpost.php?p=2625473&postcount=113
Thanks! It works very good with Google Maps
Is your WIFI works with WM6.1? After I installed MR1, my WIFI is not working anymore. I hope you might be able to help me.
TIA
to all that created this thank you, works flawless on the stock mr2 rom
can't get it to work..
Hi all! I followed this method a while back and had Google maps working great for quite some time! This past weekend I tried to use it with GPS and it couldn't find any satellites. I figured it was maybe too much cloud cover or other interference related to my location. Anyhow, yesterday I updated my XV6800 to MR2, installed the latest Google maps (3.0.0.12) and still cannot get it to find any satellites. after playing with the COM ports and location setting (currently COM4 and Loc ON) without success I installed GPS Toggle, which also cannot find any satellites.
Anyone have any suggestions to get this working again? Does this even work with MR2? I'd be happy to go back to MR1, though MR2 seems to be a little smoother and faster.
Thanks!
Bugsy68 said:
Anyone have any suggestions to get this working again? Does this even work with MR2? I'd be happy to go back to MR1, though MR2 seems to be a little smoother and faster.
Thanks!
Click to expand...
Click to collapse
Read the last couple of pages
http://forum.xda-developers.com/showthread.php?t=424387
thanks drewcam888. I'll check it out this afternoon and let you know how I make out.
BTW, I was looking around my device and I found a different version of gpsapi.dll (hidden) in the Windows directory. I'm thinking this may be the problem. It won't let me modify it though, as it's a system file. I can view it using SKTools, but not modify it.
Can you recommend a file manager program that'll let me move / copy / replace system files?
Thanks!
You can't modify a rom file or one that is created by the rom itself. Or at least I don't know how
Hello,
I'm pretty new here and new to the XV6800. I have a rom version that I downloaded from htc site that under device info reads 3.57.605.1 I don't know what MR1 or MR2 is or is mine an MR3?? Also I have a Radio version of 3.37.75?? My question is can I install this to get GPS or AGPS working on my device? Do I have to install a different radio to get it working?
Thanks,
Chris
cdeleoxda said:
Hello,
I'm pretty new here and new to the XV6800. I have a rom version that I downloaded from htc site that under device info reads 3.57.605.1 I don't know what MR1 or MR2 is or is mine an MR3?? Also I have a Radio version of 3.37.75?? My question is can I install this to get GPS or AGPS working on my device? Do I have to install a different radio to get it working?
Thanks,
Chris
Click to expand...
Click to collapse
Read the thread for a while that drewcam8888 lists above "adapter program to ......" and then make sure you change the registry settings as it describes for Valhalla in the posts from the past couple of days. I believe I posted #627 which has the places to edit for Valhalla. Listen to what others say to make sure you have everything right.
mine failed around the same time but using a different set of cab files which had worked flawlessly on both previous installs of MR1 . Is this perhaps something from verizon?....Anyway having not installed from a wrar file before how do you install the valhalla cab when the redirects disconnect from the server?
I have a xv6800 and i got it last week, the person that i got it from updated the rom. a couple days ago i cleared the storage, which i guess is a hard reset, but i wanted to know if that resets my Rom
thanks
Tyve
resets to a fresh install of your current rom. It removes all none rom files.
so do i hav to re-hack the rom to use google maps?
i have no idea wut im doing,
thanks
Yes you do
dang, that sux. thanks a bunch
my ROM version is 3.57.605.2 does anyone know if that is hacked or not?
Not it is stock verizon MR2
ok, do u know an easy way to hack it, im only 14 and i suk at hacking it
Hi everybody!
First of all i want to apologize for my bad grammar, englis is not my native..
I have a friend who's got an old pc pocket 2003SE. He asked me if i can install other language in it.
i have actually mannaged to do this but the problem is, when the battary runs out of power, the device erases every installed app on it, including the lang app.
So i thought about the option of installing a brand new OS with the lang i want build in it. Is this even possible?
Ill be grateful for any piece of info about it
I'm afraid I can't give you the final answer, but I can point out some places where you need to give more information to make it possible anyone to help you.
I think your English is clear enough, but for anyone to give you useful help, they would need to know the make and model of the device you are working on? Installations of PocketPC are adapted by the manufacturers for each of their models. Also, what method are you using to install the new language. I can't imagine why all your apps disappear, the make and model might give a clue. And, with that information, you should be able to ask your question in the appropriate sub-forum.
Prior to WM5, (WM2003SE and older) programs not installed on a memory card and user data were actually installed into the RAM. There was a backup battery to power the RAM when the main battery failed so that user programs, etc were not lost. But as these devices get older the backup battery may not hold a charge so when the main battery runs out of juice the RAM is wiped.
What is the model? It may be able to be upgraded. My old Dell Axim x50 came with 2003SE but it had an official upgrade to WM5 and unofficial WM 6.1 and 6.5 ROMs.
spunker88 said:
Prior to WM5, (WM2003SE and older) programs not installed on a memory card and user data were actually installed into the RAM.
Click to expand...
Click to collapse
Only true, if user accepted this default behaviour. It's always possible to change this.
jwoegerbauer said:
Only true, if user accepted this default behaviour. It's always possible to change this.
Click to expand...
Click to collapse
There was also a ROM partition and the memory card, but I don't think you'd have that option with user system data like extra languages that the OP mentioned. It's been a while since I used 2003SE so I could be wrong.
I forgot to mention that there is no manufacturer sign in any part of the device.. probably generic. The model writen under the battary is PH20A2.
Idk what it belongs, maybe you have a good guess
TY for all the help, i appreciate it
welcome to XDA.
with old PDA, you can user defaur rom for use
The model writen under the battary is PH20A2
http://forum.xda-developers.com/showthread.php?t=244534
Ok i have mannaged to locate the exect model of the device, its HTC Harrier \ blue eagle (not sure which one..). Wiki said that theirs an unofficial rom upegrade to 6.5, is it true? i got no clue how i do it, and if i can pick the lang i want.
EDIT :
Didnt noticed u have found the model ahead of me.. Thanks for the help but thers one problem, i dont anderstand why i need to unlocke it or from what. the guy in the link above wants to change an ESN. If someone can explain it to me like im a retarded, ill appreciate it.
Jump =]
Ill be greatful for some help
thanks! it was also a great help for me!
panahi said:
...when the battary runs out of power, the device erases every installed app on it, including the lang app...
Click to expand...
Click to collapse
If the device has a small battery, separate from the main battery, then replacing that small (backup) battery with a fresh full battery could solve your problem?