Related
whit AT&T
If it's SIM unlocked, then yes.
It will work but you'll loose 3g as far as I know. Correct me if I'm wrong
so how can i do it, point me to a link P.S
Is it sim unlocked?
it will work with AT&T but you will only ever get EDGE. The frequences are different for TMO and ATT's 3g. The hardware does not support ATT 3G. That being said if you've been with tmo for at least 3 months they will unlock your phone free of charge if you just call em as you need to get the sim unlock code from them.
It works on AT&T. I'm on AT&T. You need an unlock code from TMO, or purchase one online. Pop in the ATT sim, enter the code and you're good. 3G doesn't work, and yahoo messenger doesn't work unless you're on wifi. Not sure about AIM or Windows messenger, since I don't use those, but I'd assume it's the same since the G1 was set up for those services to count as text messages on TMO. ALSO, if you didn't activate the phone on TMO (like with a friend's sim) it won't get OTA updates. But those roll-over minutes sure feel good.
Hi guys, i have already searched the forums and cant find anything related to my title. Basically i would like to know if i could use my hd2 on at&t 3g network and how can i do it. I know i can unlock my hd2 by asking t-mobile but would it work on at&t? Thanks in advance
yeah it works on at&t network but not as 3g. It gets E which is the edge. If you search the forum there's a cab file that will program the phone so you can use data connection with at&t network. I got my phone unlocked via tmobile and have been using it with at&t for a couple weeks now without any problems.
SO you are basically saying that i can do anything i can already do with the phone on t mobile on at&t but except have 3g? So i would have to use edge as my data connection for internet? And how does sms work? Any settings to change to get it to work?
Install this cab file, its all you need to do
http://www.mediafire.com/?kmlmn4wt35m
These are the att settings everything will just work
on att, you can use gprs/edge , but of course no 3g
You have to have T-Mobile account to get the HD2....they don't sell them unlocked... after 40 days of use on a t-mobile account, t-mobile customer service will provide youw ith an unlock code, not before...
mearsfan5 said:
You have to have T-Mobile account to get the HD2....they don't sell them unlocked... after 40 days of use on a t-mobile account, t-mobile customer service will provide youw ith an unlock code, not before...
Click to expand...
Click to collapse
I'm wondering, if the radio can be flashed to support AT&T 3G band, or components are different...
alexsemi said:
I'm wondering, if the radio can be flashed to support AT&T 3G band, or components are different...
Click to expand...
Click to collapse
No, can't be flashed to work on AT&T 3G. You would have to get the Australian Telstra 9193 model which uses the 850 band that AT&T uses. That's the only way to use AT&Ts 3G with the HD2. The bands are set in the hardware.
digitallysick said:
Install this cab file, its all you need to do
http://www.mediafire.com/?kmlmn4wt35m
These are the att settings everything will just work
on att, you can use gprs/edge , but of course no 3g
Click to expand...
Click to collapse
Is there any settings/cab file for Rogers network in Canada?? Any help would be appreciated. Thanks
desiplaya172 said:
yeah it works on at&t network but not as 3g. It gets E which is the edge. If you search the forum there's a cab file that will program the phone so you can use data connection with at&t network. I got my phone unlocked via tmobile and have been using it with at&t for a couple weeks now without any problems.
Click to expand...
Click to collapse
how did you get the unlock code from t-mobile before 40 days of activation. That is what they told me when i asked for the unlock code. could you please share the secret....
mearsfan5 said:
You have to have T-Mobile account to get the HD2....they don't sell them unlocked... after 40 days of use on a t-mobile account, t-mobile customer service will provide youw ith an unlock code, not before...
Click to expand...
Click to collapse
this is incorrect. anyone can get the hd2 without contracts @full price of 450 plus tax. they will also unlock it in 1 to 5 days if you paid full price.got mine from wirefly, and had it unlocked in 2 days.
miguel4u2 said:
Hi guys, i have already searched the forums and cant find anything related to my title. Basically i would like to know if i could use my hd2 on at&t 3g network and how can i do it. I know i can unlock my hd2 by asking t-mobile but would it work on at&t? Thanks in advance
Click to expand...
Click to collapse
i have unlocked my t-mobile htc hd2 and used on att network, all works fine but not 3g.
alsalahi said:
i have unlocked my t-mobile htc hd2 and used on att network, all works fine but not 3g.
Click to expand...
Click to collapse
I have an HD2 on AT&T and everything works, but not fine! If I am browsing the internet and the phone tries to update the weather or mail, really anything else that accesses data in the background it will stop my data connection everywhere. It seems the only way to fix this is a hard reset sometimes, at the very least I have to exit the browser, open the task manager, kill everything, and turn off the data connection in the wireless controls and turn the data back on... My questions to the others who are using this phone on AT&T are 1) are you experiencing the same problems? 2) What did you do to fix this. I have installed the above mentioned cab file for settings and I have also manually entered the settings. I would love the phone even though it only has EDGE except it cant hold a data connection for more than 10 minutes at a time.
profclean2000 said:
I have an HD2 on AT&T and everything works, but not fine! If I am browsing the internet and the phone tries to update the weather or mail, really anything else that accesses data in the background it will stop my data connection everywhere. It seems the only way to fix this is a hard reset sometimes, at the very least I have to exit the browser, open the task manager, kill everything, and turn off the data connection in the wireless controls and turn the data back on... My questions to the others who are using this phone on AT&T are 1) are you experiencing the same problems? 2) What did you do to fix this. I have installed the above mentioned cab file for settings and I have also manually entered the settings. I would love the phone even though it only has EDGE except it cant hold a data connection for more than 10 minutes at a time.
Click to expand...
Click to collapse
Well due to the type of connection that EDGE is, you cannot be on the internet and talk on the phone at the same time. This would also go for all applications that use the data connection...only one at a time. This was the case on the pre-3G phones like the HTC Wizard (Cingular 8125).
alsalahi said:
i have unlocked my t-mobile htc hd2 and used on att network, all works fine but not 3g.
Click to expand...
Click to collapse
i am using the same phone. unlocked it and used att isp to use network. it shows E as edge network but sometimes it shows G in it. i dont know why but it shows G in some places and works better.. does anyone know what is that and why it happens. can i do anything to get G everytime? i use my phone in texas USA
praym said:
i am using the same phone. unlocked it and used att isp to use network. it shows E as edge network but sometimes it shows G in it. i dont know why but it shows G in some places and works better.. does anyone know what is that and why it happens. can i do anything to get G everytime? i use my phone in texas USA
Click to expand...
Click to collapse
The phone cannot and will not get 3G when used on the AT&T network, despite what your icons show...the hardware simply isn't capable. Period.
Bought my unlock code through ebay for $14.00 and had the phone unlocked in 20mins. HD2 works great now.
praym said:
i am using the same phone. unlocked it and used att isp to use network. it shows E as edge network but sometimes it shows G in it. i dont know why but it shows G in some places and works better.. does anyone know what is that and why it happens. can i do anything to get G everytime? i use my phone in texas USA
Click to expand...
Click to collapse
G = GPRS
E = EDGE
look them up on wikipedia if you want more info but.....
GRPS is older and slower than Edge, GRPS max speed in ideal conditions is somewhere i the upper double digits/ lower triple digits. You might be lucky to get into the 200kbps range with EDGE.
In the end both suck compared to being able to get tmobile's 3g signal which ive personally seen hit 5mbit/s here in tampa now that HSPA+ is deployed. Being able to get ATT's 3g might get you right around 1mbit if lucky. I dont know what if any plans ATT has for HSPA+ deployment
digitallysick said:
Install this cab file, its all you need to do
mediafire.com/?kmlmn4wt35m
These are the att settings everything will just work
on att, you can use gprs/edge , but of course no 3g
Click to expand...
Click to collapse
(edited url cause I can't post as a new user)
I used this .cab file and while I can browse the web, I can't seem to send MMS pictures using my AT&T sim, are there other settings I have to change?
EDIT: I found the answer here, after a bit more searching! Thanks all, forum.xda-developers.com/showpost.php?p=6695081&postcount=13
I just bought the hd2 and planning on unlocking it to work on AT&T. I know that I will be getting Edge instead of 3g. But can someone plz explain to me how does it work as far as data plans and mms. Do i need to have a data plan to send mms or mms will be sent through edge. and as for data and web browsing , do i have to have a data plan or since when i go online i will be on edge so i dont need a data plan
mearsfan5 said:
You have to have T-Mobile account to get the HD2....they don't sell them unlocked... after 40 days of use on a t-mobile account, t-mobile customer service will provide youw ith an unlock code, not before...
Click to expand...
Click to collapse
90 Days, unless they changed it. 3 phones unlocked, 90 days between each.
Hi,
I searched but couldnt find any threads on this topic. I just go my Hd2 for Tmobile unlocked (stock roms). I use it on ATT and my all my programs connect to the network except SLACKER RADIO. Howver, it does work over wifi.... so im not sure how to fix it.
Also, the location for the weather app is not accurate... how can I fix this?
Thanks!
Slacker i cant help you with as it only works over there, but the location thing, onep up google maps get a gps lock ,then try and update see if it makes a difference, the weather thingy isnt the best where i live it doesn't work at all, I have yo use an app called Weather/city Editor,
i am also having the same problem. slacker won't work on ATT edge but all other programs do just fine.. any fix for this?
romors666 said:
i am also having the same problem. slacker won't work on ATT edge but all other programs do just fine.. any fix for this?
Click to expand...
Click to collapse
It has to be an AT&T thing, because I am on TMO and it works fine, so I doubt it is a phone issue, but a provider one ...
EDIT:
But on a side note, when I am roaming on AT&T it still works go fig ....
watcher64 said:
It has to be an AT&T thing, because I am on TMO and it works fine, so I doubt it is a phone issue, but a provider one ...
EDIT:
But on a side note, when I am roaming on AT&T it still works go fig ....
Click to expand...
Click to collapse
I talked to t-mobile a couple of weeks ago, because my phone would lose signal it different parts of the hospital I work at. So I tried to force roaming onto at&t (It detected it as available) but it wouldn't connect.
They told me that their roaming agreement with at&t ended last fall (which I googled to be true) and that for the most part, wireless carriers were no longer doing roaming agreements. I told them that sprint and verizon still had agreements, but whatever.
They said I might be able to jump onto at&t or other networks in limited circumstances, but that would only be in areas with confirmed zero t-mobile coverage.
Lucky for me t-mobile covers texas very well and I don't travel much!!!
On the original topic, At&t is notorious for restricting their network. They just let slacker over 3g with the iphone a few months ago. I'm guessing it is at&t restricting it to 3g only.
I apologize because I think I may have posted my questionin the wrong place two days ago. I'll see if I can delete it. I hope a few people here can answer me.
My question is that I already have a voice data account with tmobile and SIM card for that account in my Galaxy S Vibrant. Can I remove the SIM from the vibrant and place it in this particular International unlocked P1000 Galaxy TAB to use this P1000 as phone and data just by moving the SIM card? Or do I have to still notify tmobile that I am moving the SIM to this unlocked P10000 device? And will all features of this international version then work....the phone and 3G data with my SIM from the working Vibrant? If I can just move the SIM card is there anything else that I have to know or have to do?
All US carriers consider Samsung Galaxy Tab as a mobile broadband data device and make difficult to walk around this decision.
Since you are going to get a Tab not from T-mobile, it will not have your IMEI number recorded and might treat your Tab as a phone allowing for both voice and data. The issue might be only that you will not get 3G for data because software and hardware do not support unique 1700/2100 AWS frequency bands utilized by T-mobile in the US.
Do you have the phone dialer icon? If not you will need to flash a rom so you have a dial pad.
Thank you both for some answers.
The reason I was looking at this imported version was because I read that this Samsung tab already allowed telephone and since I already had a working 3G and telephone SIM from tmobile I thought this was the way to go. I really wanted this Samsung Tab to do telephone so that was the real reason even looking at this particular item.
No I have not ordered this yet. I wanted to ask the questions BEFORE I paid the money to find out that it will not work in my situation?
So what I am reading from both of you is
1. I probably will not get 3G, and
2. I would need a dialer Icon from somewhere.
Not getting 3G is a "do not purchase this" issue then for me.
Any ideas on the Samsung Tab then? I do NOT mind signing it up with tmobile, I just also wanted it to do bluetooth phone, 3G and then only need to carry this one device.
You guys are great
Thank You
The T-mobile tab can be unlocked. After it is unlocked you can flash it with a European rom and Roto's modem swithcher. You can then run 3G on any carriers sim card and switch to 2g (edge) and phone with T-Mobile using Roto's modem switcher.
Bugman1 said:
The T-mobile tab can be unlocked. After it is unlocked you can flash it with a European rom and Roto's modem switcher. You can then run 3G on any carriers sim card and switch to 2g (edge) and phone with T-Mobile using Roto's modem switcher.
Click to expand...
Click to collapse
WoW. Thanks for that info.
Wonder if you do all this and will hear incoming calls if you are in 3G mode. (i guess this is what the Roto's switcher does, it places it in 2G or 3G). Then if you could/would hear it ring while in 3G, for an incoming call you would then have to switch to the 3G mode with this Roto switcher? Trying to get the call before voice mail kicks in? (what is it, an icon for an on-off type thing of its installed software).
Has anyone actually done any of this?
Yes its been done by many Tab owners. Search the galaxy tab developers section for how to flash roms, modems and kernals. You'll find a treasure trove of information on how to improve the Galaxy tab. The Developers here at XDA are an incredible group of people and most are willing to share their development findings with other Tab owners.
Good Luck.
Bugman1 said:
The T-mobile tab can be unlocked. After it is unlocked you can flash it with a European rom and Roto's modem swithcher. You can then run 3G on any carriers sim card and switch to 2g (edge) and phone with T-Mobile using Roto's modem switcher.
Click to expand...
Click to collapse
Do I understand you correctly saying that T-mobile Tab after flashing can get 3G and voice phone on any carrier Sim?
This would be my "dream". So far I can only get either voice with phone Sim or 3G data without phone capability. BTW, the latter requires Sim with paid data service separate from smartphone. Roto's swither is just a utility flashing either phone modem or 3G data modem.
Would you mind to give more details supporting your post.
P.S. European Tabs have phone voice capability and a dialer out of box. Not extra flashing is needed.
Adapt0r said:
Do I understand you correctly saying that T-mobile Tab after flashing can get 3G and voice phone on any carrier Sim?
Roto's swither is just a utility flashing either phone modem or 3G data modem.
Click to expand...
Click to collapse
Voice + EDGE data OR OR OR 3g data/ no voice NOT NOT NOT both!!
You cannot get 3G data and voice at the same time on the Galaxy Tab. With the modem switcher you can switch between 3G data only and 2G (edge) data and voice.
Until the development community can come up with a method to run 3G data and voice at the same time (if possible) the modem switcher is the best answer to the problem.
Also the the T-Mobile Tab can be unlocked so that any GSM carrier's sim card can be used. This allows you use the sim cards from Simplemobile or any other GSM carrier and not be locked into a T-Mobile sim card.
Anyone live here in MD and want to make some money setting me up doing this thread hack/install for me?
I am a T-Mobile customer and here is set up on my T-Mobile tab:
1.Tab running Roto's JME v4 (European firmware that will allow voice+edge)
2. Roto's Modem Switcher (switch between 3G only or Voice+Edge)
3. My old Vibrant SIM card (Voice+Data)
4. Broke IMEI so i could use my Vibrant SIM to go online and stop getting re-directed to t-mobile site.
So basically i use my tab as a phone now but only getting voice+edge, if i want faster speeds i switch over to 3G using the Modem Switcher. The only way you can get both voice+3g is if you unlock the tab and use AT&T sim, if you want to use T-Mobile sim that option is not available unless a modem comes out that allows both voice+3g.
Hope this helps in making your decision.
adinis78 said:
I am a T-Mobile customer and here is set up on my T-Mobile tab:
1.Tab running Roto's JME v4 (European firmware that will allow voice+edge)
2. Roto's Modem Switcher (switch between 3G only or Voice+Edge)
3. My old Vibrant SIM card (Voice+Data)
4. Broke IMEI so i could use my Vibrant SIM to go online and stop getting re-directed to t-mobile site.
So basically i use my tab as a phone now but only getting voice+edge, if i want faster speeds i switch over to 3G using the Modem Switcher. The only way you can get both voice+3g is if you unlock the tab and use AT&T sim, if you want to use T-Mobile sim that option is not available unless a modem comes out that allows both voice+3g.
Hope this helps in making your decision.
Click to expand...
Click to collapse
Hello and thanks very much,
Seems that you are a match to my scenario. Are you happy with everything the way it works now (voice/2Gdata).
Do you have Caller ID working in any setting/switch?
And to make sure I understand this part. If I am in 3G mode I will NOT ever know of an incoming call by any pop up or beep or anything? The only way to know if some one even tried to call is to go to voice mail from 2G/voice being switched? (se, I am not a voice mail user. i have my Vibrant tmobile voice mail turned off at tmobile.)
So what i read at the top of this thread about having to unlock it is not the case for me?
Do I have to remove anything or add anything else?
Having to do anything at all other than these 4 things you listed for me is not needed?
That's very interesting. How do you "break" IMEI?
And these installs that you did list, is this the exact order to do these things?
And what about the thing where someone said I need a phone icon?
How do you switch to phone mode and dial?
BTW how is it as a phone with Bluetooth device? How is the volume (at both ends). Can you hear okay?
And I think one last question. If you happen to be in a wifi spot and using the tab in wifi mode, does the phone work at all?
Bugman1 said:
You cannot get 3G data and voice at the same time on the Galaxy Tab.
Click to expand...
Click to collapse
No true. If you flash the at&t tab with Roto firmware, and install the bell modem, you can have 3g and voice with an at&t sim card, but again, at&t tab only does this.
Dear noreturn
If you so eager to get it and need help send me PM. I am almost your neighbor.
I would not recommend you breaking (meaning erasing file containing) Imei.
You have two other options
- get At&T tab, unlock it use on Tmobile with Vibrant sim. You will get voice and Edge which is very usable around dc-md-va. 3g will be only on att.
- get European Tab that is unlocked and use it on same way as #1 but no extra firmware flashing is needed.
Unlocking of either Att or Tmobile Tab is easy the same is true about flashing. however it takes more time.
Caller id works as on any phone.
Adapt0r said:
Dear noreturn
If you so eager to get it and need help send me PM. I am almost your neighbor.
I would not recommend you breaking (meaning erasing file containing) Imei.
You have two other options
- get At&T tab, unlock it use on Tmobile with Vibrant sim. You will get voice and Edge which is very usable around dc-md-va. 3g will be only on att.
- get European Tab that is unlocked and use it on same way as #1 but no extra firmware flashing is needed.
Unlocking of either Att or Tmobile Tab is easy the same is true about flashing. however it takes more time.
Caller id works as on any phone.
Click to expand...
Click to collapse
Yes I really do want to get this samsung with voice.
So are you saying get this version of the Samsung tab and use my tmobile vibrant SIM?
Then install that modem switcher thing is all? And I guess I read about a dialer icon or something?
European Tab has everything for voice and Edge but Tmobile tab just cheaper.
Dialer comes installed with European, on Tmobile it appears after flashing.
Hope you understand your options. Modem switcher helps only if you have paid data service or erased your Imei. The last case is legally questionable thats why I would not advise it.
rangercaptain said:
No true. If you flash the at&t tab with Roto firmware, and install the bell modem, you can have 3g and voice with an at&t sim card, but again, at&t tab only does this.
Click to expand...
Click to collapse
True. I should have clarified my response in that I was referring to the T-Mobile version.
I have the Hong Kong version,which has the same 3G frequence with At&t.
I use a At&T sim card and has 3G or H on phone and data works perfect.
For t mobile sim card you will only get edge for voice and data.
If you have any question you can email me.
Jimmy
Its kind of pricy,it cost me almost 700.00,but you don't have to change anything.
It depends on what carrier you use Tmobile 2G, AT&T 3G.
I love the device.you can hold it by one hand and use other hand to surf.
jimmy
Anyone using an unlocked T-mobile S7 with an AT&T Sim? Do you get full LTE? Any difference in signal strength, etc?
Just curious. Im about to trade my S7 edge for a regular S7 cause I like the smaller size, but it's an unlocked t-mobile model. I know they both use the same bands so it should work fine. Just wondering about anyone else's experience. Thanks.
I'm using an unlocked T-Mobile on AT&T. I don't have any signal problems. I, however, cannot get volte to work. I'm in the process of looking to see if anyone has been able to maybe flash AT&T firmware onto a T-Mobile variant, or if we might be able to flash the stock firmware and use an ATT CSC to gain volte. I also don't get notifications from visual voicemail but visual voicemail does work. The notification comes through like a standard voicemail notification and then I have to open the VVM app and refresh to see the new message.
Thanks for the reply. Good to know. I don't use the volte actually I have it turned off because I seem to drop more calls with it on then with it off. But yeah if an AT&T stock fw could be flashed to it I think the tmo model would be preferable to me.