Related
Hi
I'm the very proud owner of a HTC HD2.
When trying to install most tweeks / .cabs the phone says unsuccessful cannot install due to invalid or no certificate.
I have CERegEditor installed on PC. is there a simple reg change or app to overcome this? I have searched in this forum...but not been able to find.
Many thanks..
Rob
Hi and welcome to XDA fellow tmobile uk user
tmobile blocks changes to the registry, there are 2 solutions to this
a cab file is a simple installation file for your phone, people here will make these tweaks into cab files, download them from the device and install them onto your device and restart the phone
the other solution is to flash your phone to another rom, either stock rom or custom rom makes no difference
i am currently using artemis 5.5 and it is 10000x better than the tmobile stock rom
hope this helps!
cgrec92 said:
Hi and welcome to XDA fellow tmobile uk user
tmobile blocks changes to the registry, there are 2 solutions to this
a cab file is a simple installation file for your phone, people here will make these tweaks into cab files, download them from the device and install them onto your device and restart the phone
the other solution is to flash your phone to another rom, either stock rom or custom rom makes no difference
i am currently using artemis 5.5 and it is 10000x better than the tmobile stock rom
hope this helps!
Click to expand...
Click to collapse
hi Mr CGREC92....
If you do flash the rom, say, to the latest official HTC updated ROM, does this create problems with your warranty on the Tmobile phone?
thanks cgrec92,
any problems in flashing an new radio or rom on uk tmobile? how about getting tmobile setting ?
Bandare and RobLion, flashing the first time may be a scary thing but I assure you its much easier than you think and the whole process lasts about 5 minutes.
The phone and text messaging settings are on the SIM card, not on the phone, flashing a new ROM will not affect this.
As soon as the phone turns on for the first time after a flash, it prompts you to connect to the Internet using your data connection. Select your operator from the list as Tmobile and the phone will do the rest for you.
To summarize, nothing changes to your phone, text, or internet settings.
You will however need to perform a hard reset after a flash which wipes data from your phone such as your contacts, photos and text messages. A simple backup program, I use Microsoft MyPhone will back all this up in a couple of minutes, and after the flash you can re-download them.
After that all that's left to do is add in all your little shortcuts to the People Tab and Internet Quicklinks etc
Job complete
The flashing will void your warranty, but you can return to how the phone was in a couple of minutes, thus getting your warranty back, i'll explain
To flash your phone, you will download a little program from the first post on this forum called HSPL which modifies the bootloader of the phone allowing you to install any ROM you want
If you send your phone off for repair, the first thing these people check is your SPL, if they see it has been changed to HSPL they will not repair your phone. But by flashing your phone with the original tmobile rom that came with the phone (downloaded from the second post on this forum) through the microSD card will restore the SPL and your original ROM, voila your warranty is restored
To flash your phone, you will download a program called CustomRUU and a .nbh file, put these both into the same folder and connect your phone by USB to your computer, do not flash through the microSDcard unless you are trying to restore your warranty because this will change other settings on the phone, unlike the USB method will simply install the new ROM. Connect your phone through Active Sync, then run CustomRUU and follow the instructions
Your phone will then install the ROM
Hard reset (As soon as you turn the phone on, hold down VolUp and VolDown)
Your phone will now be nice and fresh with your new awesome ROM
Hope this helps, it's much easier than it sounds, follow the sticky threads for installing a Custom ROm and HSPL for more detailed info
Oh and let's not forget the advantages of this
Instead of that crappy Web'N'Walk you will have Opera
You will have the YouTube app
You will have more freedom and a MUCH MUCH MUCH more stable and fast ROM
cgrec92,
I can not thank you enough for taking the time to give advice. I'm thinking of installing EnergyROM....what made you chose artemis?
no problem mate, ive been in your situation not a couple of weeks ago
flashing is the best thing you can do for your phone in my opinion
and after a bit of flashing you can familiarize yourself with the MTTY process and make the process even faster!
energy rom is very good, its one of the best out there, I have however heard there are some issues with fast battery drain? but above all its a very good rom
i use artemis 5.5 because it is almost identical to the original rom that comes with the phone, with tweaks to make it more stable, MUCH faster and smoother, everything updated, has a document reader tab, in my opinion it's the most stable
I have been using for some 5 days now and have found NO bugs whatsoever
as opposed to the odd 80 bugs in the tmobile ROM
its all a matter of taste my friend, if you dont like the energy rom, install another one!
theyre all being constantly updated with the latest updates, builds, and tweaks
flashing is fun!
oh and I forgot to add that some custom ROM's require a specific radio and this must be flashed before the ROM is installed, this is dead simple and takes half a minute
let me explain
a radio is a piece of software which controls communications such as phone calls, text messaging, 3G, internet etc. different radios have different effects, for example better signal, better battery life, better data handling
if i remember correctly the t-mobile rom comes with radio v 2.04
at the moment there is a radio v 2.08 again it's a matter of preference, find which one gives you the best signal and battery life!
to install is simple, the radio comes in a .nbh aswell, usually about 25mb which is very small
just like installing a ROM, put this .nbh in the same folder as the CustomRUU and flash the radio using CustomRUU, just like flashing a ROM!
you will not need to do a hard reset, when the phone restarts your new radio will be installed and ready to use
I guess i'm going to become a flasher now!
Thank you for advice. i'll post any further questions in ROM forum after i decide which Rom to go with.
thank you.
HI,
agreed I have a t-mobile hd2 and it's the best option flash a new rom, also I sent my phone back under warranty and fwas ully fixed no quible just had to back out the hpsl as pointed out earlier in this thread it all works...
thanks daveyg99,
i guess you both know its a big decision to make your 1st flash.....gulp...brave pill taken.....just chosing radio and rom now.........
good man
any problems just post back on xda youll get answers within a couple minutes
sorry cgrec92,
question......im looking at HSPL......it says check spl version is 1.42.0000 check by holding volume down button and reset....
how do i do this?
turn your phone off
press the button to turn your phone back on again but hold down the VolDown button
it'll bring you to a 4-coloured screen with a bit of text
it should say spl 1.42.0000
take the battery out and put it back in and turn your phone back on normally
job done
thanks done it....1.42..ok.. I hadn't turned the phone off first doh!
hspl done
great work
now all you have to do is choose your ROM
ok going for energyROM 21892 with cookie...the more stable one......dl now......42min left...
good choice my friend
the download file will include a .nbh file, make sure to rename this file as RUU_Signed.nbh if it hasn't been done so already
the download might include a CustomRUU which will be used to flash the ROM
if it doesnt then this can be downloaded from the sticky threads aswell
let us know how it goes
Hello.
This is my first post, so please be kind to me!
I've spent the past few weeks trying to get my head around what to do in order to flash my HD2 which is on the t_mobile network
The original rom 1.43 i think is driving me crazy and I now dont care if I change the rom and it invalidates the warenty!
In order to HSPL I need to SPL first, but will my device allow this?
I've read through so many threads that I am completely confused and dont know which way to turn, never mind which thread to re-read.
Can someone point me to the sspl, HSPL to upgrade to 1.66
Thanks
Glyn
oh its the 512 version
you are over confusing yourself.
download hspl 2
instal it - choose whichever hspl you like (may as well go for 2.08.hspl)
flash whatever rom you like from usb. (don't forget to flash a compatible radio either before or straight after.)
Thanks for your reply......
so downloan the HSPL from here?
'forum.xda-developers.com/showthread.php?t=609477'
and as I run the program I'll get the option of which version to install?
What should I look for to make sure that the radio is compatible with the rom?
Thanks again and sorry for my ignorance
Glyn
best thing you can do is to read a lot. No need to do enerything in one mad dash.
get HSPL2 from HERE - end of the first post (but read the post, dont just skip to download, )
run it as administrator (right click, run as administrator)
for best results use a usb port on the back of your PC (i.e one directly on teh motherboard, not an external usb slot) it will ask what version you want to install. just go for 2.08.hspl (not 2.08.0000) and let it do its thing. the authors say you should match the version to the rom (so 1.43.hspl for roms that are 1.43 or 1.48, 1.66.HSPL for 1.6 based roms, etc, but it isn't critical, most will run on any HSPL, so dont go changing every time you flash a new rom, no need. If it doesnt work then change it.)
As for radio tips, a radio with .51. in the number, (eg 2.09.51.03) will NOT work with any rom that has the 576meg ram, enabled.
If you flash a rom and all you get when you restart is a grey screen, chances are the radio doesnt match. Boot to bootloader and flash the radio.
But most of all, read stuff.
What about shipped rom's that are .exe files? Do they include radios with it? Also, is there a post you can point me to that has a list of compatible radios with different rom's?
that's where reading comes in. the whole process has so many variants that there is no simple "a b c" that covers everything.
yes the exe includes radio (and also spl if you use sd card to flash -stay away from sd card, use usb and if anything goes wrong you just boot to bootloader and re flash)
the chefs give you all the infoyou need in the first couple of posts. the sticky threads in the rom development section will tell you how to do everything, and any problem you encounter has beenwritten about already. so read,search and read.
I suggest you flash Stock WWE 1.66 ROM first so you can have a feel of how much improvement
has been done from 1.43
you can download it in HTC website.
Thanks for your help so far..
I would like to go for the 1.66 official ROM first, so I'll find that on here first and find the exe file so I dont have to mess about with compatible radio's.
Just before I HSPL it, I would like a copy of the original 1.43 T-Mobile ROM, so better get searching.
Thanks again
Glyn
the original 1.43 T-Mobile ROM is on HTCs website so get it from there as a backup
THANKYOU!!
Thankyou so much for your help and guidance.
Last night I decided to just do it - the phone was so poor I couldn't take it anymore.
3 hours from start of backing up, to installing HSPL2, to flashing with 1.66, anf then restoring data
I cant believe the transformation - I am so pleased I didnt throw it at a wall!!!
So a massive thanks to the members of this community
im in the same boat... got a stock uk hd2 on tmobile and wasn't to flash a new rom but the information is overwhelming and im scared I will flash a wrong rom and kill my phone :0)
Chivalryyyy said:
im in the same boat... got a stock uk hd2 on tmobile and wasn't to flash a new rom but the information is overwhelming and im scared I will flash a wrong rom and kill my phone :0)
Click to expand...
Click to collapse
theres nothing to it. the 'normal' hd2 which you do have, is about the safest phone to flash in the world today, with HSPL2. The 'radios killing phones' problem that started last week is specific to the t mobile US model only, , the one with 1 gig rom.
If you install HSPL on your phone, and then only flash over USB, the very worst that will happen (from a software point of view) is that the phone stops at a grey screen, and/or only boots into bootloader, so you boot into bootloader, you flash something else, and it's fixed.
The T Mo UK stock rom is available to download as backup, (as is o2 and voda for anyone looking) in the 'LEO official roms' thread in rom development, first post, first link, first folder (1.43)
At any time, you can flash that rom from sd card (look it up if you need to) and restore everything, spl, radio and rom, , to factory settings.
In all honesty, so long as you are careful, methodical, don't pull out USB cables halfway through, laptop battery dies, etc , then you are more likely to get bricked from some freak incident, like , umm, battery dieing, heh.
Fear not! be smart, be careful, try to understand what you are doing and why at each step, read up on what an spl is, and the job is , as they say, sorted.
RE: Please Help
rockthebus said:
Thankyou so much for your help and guidance.
Last night I decided to just do it - the phone was so poor I couldn't take it anymore.
3 hours from start of backing up, to installing HSPL2, to flashing with 1.66, anf then restoring data
I cant believe the transformation - I am so pleased I didnt throw it at a wall!!!
So a massive thanks to the members of this community
Click to expand...
Click to collapse
Hi Guys
Can you help me...
How do i back up the phone before adding HSPL?
is this neccesary and where do i get the stock rom copy from.
i got the phone this week and hate it in its present form... can't even watch youtube.
looking to update to avoid sending back
Regards
mkhonat
re:
samsamuel said:
theres nothing to it. the 'normal' hd2 which you do have, is about the safest phone to flash in the world today, with HSPL2. The 'radios killing phones' problem that started last week is specific to the t mobile US model only, , the one with 1 gig rom.
If you install HSPL on your phone, and then only flash over USB, the very worst that will happen (from a software point of view) is that the phone stops at a grey screen, and/or only boots into bootloader, so you boot into bootloader, you flash something else, and it's fixed.
The T Mo UK stock rom is available to download as backup, (as is o2 and voda for anyone looking) in the 'LEO official roms' thread in rom development, first post, first link, first folder (1.43)
At any time, you can flash that rom from sd card (look it up if you need to) and restore everything, spl, radio and rom, , to factory settings.
In all honesty, so long as you are careful, methodical, don't pull out USB cables halfway through, laptop battery dies, etc , then you are more likely to get bricked from some freak incident, like , umm, battery dieing, heh.
Fear not! be smart, be careful, try to understand what you are doing and why at each step, read up on what an spl is, and the job is , as they say, sorted.
Click to expand...
Click to collapse
Hi samsamuel,
Sorry to msg you like this.
i have purchased a T mobile HTC HD2 which came with the stock 1.43 ROM.
I want to put 1.66 on but don't know how.
I've read the forum and looked on youtube but confused.
Do you have an idiots guide?... i really am an idiot when it comes to stuff like this!
I have downloaded HSPL2 file.
I have downloaded the back up 1.43 Stock Rom
Do i need to download the 1.66 ROM now and how do i update?
please excuse my ignorance and i am happy to donate if you can help.
Kind regards
Mkhonat
RE:
Hi Samsamuel,
Thanks.. just one more thing.
Saw on youtube that i have to format my SC card
youtube.com/watch?v=nrmlqrfCvas[/url]
is this so and is this referring to the sd card in the HTC or my own sd card used to download the 1.66 onto?
regards
mkhonat
PS. why won't this forum allow me to send you a PM?.. i can't send any msg's at all.
Sorry if this has been posted already, but I'm in a hurry since I'm at work. I need to get a replacement phone from tmobile, and I'm pretty sure that since I installed Elegancia, my warranty is voided. What all do I need to do in order to get everything back to normal?
I'm not sure but you must use the same tool. to unistalled. HSPL2_1024.run. to revert it. 2.08.HSPL to 2.08.0000. and then flash to original rom.
Or flash a stock ROM (found in the stickies) from your SD card. That will overwrite the HardSPL. But don't use the 16GB card that came with the phone. It will usually not work using that card. Format a different (preferably class 6) SD card and copy the stock LEOIMG.nbh file to it and flash from there.
or just flash it to the stock rom via USB cable. Pretty much the same process you used to flash to the custom rom you have now it's the exact same thing when flashing to stock rom. Look in the HD2 Tmobile ROM section and get the latest one. That's all you need.
Phenomenon said:
or just flash it to the stock rom via USB cable. Pretty much the same process you used to flash to the custom rom you have now it's the exact same thing when flashing to stock rom. Look in the HD2 Tmobile ROM section and get the latest one. That's all you need.
Click to expand...
Click to collapse
From what I have read and understand, this is bad information (although I haven't actually tried it to verify that it would work or not). From all of the information that the experts have provided in theses forums, you need to flash the stock ROM from the SD card in order to overwrite the HSPL. The HSPL would not be overwritten if flashing via USB and active sync.
i got my replacement and i sent my phone in with a custom rom.
but to go back to stock it's just like you setting up a custom rom, find the original rom you want there are 2 that's out for the phone( the one shipped and the update) and your all set
i just sent in my custom rommed phone also, they didn't care.
theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock
Hello,
Heres the story:
I sold today my htc hd2 and someone came by to my house to get it and pay. Now i got a message that he cant get used to android. Now I need info for a simple instalation of windows mobile on the htc hd2. Like Getting a windows mobile RUU.exe and simple install it with 1 setup. The phone has hyperdroid, magdlr 1.13, cwm 1.3
I need your answer fast.
David
You can just download the official rom and flash it over usb, it will overwrite everything, HSPL, radio, splash screen, everything back to stock. Or you could do the same with most other wm6.5 roms, but if you're giving it to someone not comfortable with it and you don't want to be their phone support guy for the next however long, I would give them the phone stock, or link them to the proper official rom.
If you have a US T-Mobile HD2 (1024): http://support.t-mobile.com/doc/tm54430.xml?
If you have an HTC HD2 (512): http://www.htc.com/www/SupportDownloadList.aspx?p_id=297&act=sd&cat=2
The above instructions are correct, but did not mention that if you have flashed HSPL and MAGLDR that you will need to flash the stock ROM from an SD card that is under 2Gig in size. Just copy the original ROM file to the card, enter bootloader mode and go from there.
One thing, though - if the person who bought your phone can't get used to Android, he's in bigger trouble than he thinks. I mean, what the hell did he think he was buying? Is it that he can't get used to a PDA phone, a touch screen or does he prefer communicating by carrier pigeon? Rhetorical questions, I know, but geez... what the F did the guy think he was getting, and why is it now your problem?
I'm no expert, but I thought I remembered hearing something about how you weren't supposed to flash the original rom from sd, because it somehow makes it so you can't reflash hspl later if you change your mind.
Not 100% on that by any means.
I know this may involve an extra step, but to avoid usage of SD flashing, you can flash a custom HD2 WM6.xx ROM. Then flash the stock ROM..
willr001 said:
I'm no expert, but I thought I remembered hearing something about how you weren't supposed to flash the original rom from sd, because it somehow makes it so you can't reflash hspl later if you change your mind.
Not 100% on that by any means.
Click to expand...
Click to collapse
That may have been the case in the early stages of HSPL development. If you flashed the wrong rom and got stuck on an spl that was not supported by the HSPL versions out then that was so. This is no longer the case now with all spl versions being able to be HSPL'd.
I gave him an link to an official RUU wm 6.5 NL rom. It's an exe file. I told him he haves to run this exe file in android and if that doesnt work he haves to go to boot menu (holding volume down) and if that's doesn't work he haves to try out the usb flasher option in magdlr. I also gave him the link to this forum post.
here is a simplier way to explain it. i use it sometimes if i forget how to do it...
http://www.youtube.com/watch?v=Wc89Gh0QpIY&feature=related
Hi, New to HD2 but not to flashing ROMs ( Mogul, polaris, TyTN 2) got a second hand TMobile USA yesterday. Came with a nand Android 2.2 install, Magldr v 1.11 and spl 2.08 hspl. I intend to flash back to the stock rom ( latest version T-Mobile HD2 MR Software (Version 3.14.531.1 ) so I can dual boot with an sd android install. I also intend to check out some of the custom 6.5 builds along the way.
Have installed HTC sync for Android and and all appears to be good. I can also get a usb connection while in bootloader.
I'm assuming its as simple as the 2nd post but I don't want to brick my new phone on my first day . Would somebody please confirm that I'm not making any obvious mistakes? I gather I will then need will need to flash a new HSPL, which version is recommended for my purposes?
I apologize in advance for asking such a simple question but the HD2 forums are new to me and much larger than those for any of my old phones. I have been reading for most of the past week and think I know what I'm doing but I might be completely wrong.
EDIT
Is anybody out there?
I know that posting in "[GUIDE] Flashing Your First HD2 NAND Android Rom [For Newbs]" would be more appropriate but I can't seem to post in it as I just get a bulletin message saying I don't have permission. This is the closest thread I can find for my question.
Many Thanks in anticipation of a reply
Oh well. No replies. looks like I will just have to give it a go. Will play with some other Nand android builds first and upgrade MAGLDR to 1.13. Will also experiment with different radios to see if I can improve battery life as it is shocking (loses nearly 30% in 7 hours while 'asleep").
BTW I think my current radio is 2.08.50.08 (settings/software information/baseband version - second half of string). Happy to stand corrected if this is not where you find the radio version in android - as I said before I'm new to this OS.
In case anyone is wondering. The reason for multiple posts in a dead thread is to reach the number required to post on the more appropriate development thread.
Hope that does not upset anyone. I do promise to come back to this thread and post how I got on. ie successes, failures, tips etc.
My Leo's touch screen finally died on me over the weekend, which I guess is a good run since launch till now. But anyway, I am getting a replacement phone and got to send this one back. Now it has android loaded onto the nand and I am not to sure they would be happy to get it back like that, so should I just go get the newest update off tmobs website or someone got a link?
Can I reflash the stock rom without needed the screen, if I remember back then you just plug it in and run the exe and it did the rest?
Also is there anything else I should do before sending it back?
If you are using a t-mobile HD2, then yes, you may flash the newest t-mo stock rom. Do it from your sd card if you want to remove the HSPL. But you can also remove the HSPL through Cotulla's HSPL 4, just run his exe and choose the latest SPL.
Kailkti said:
If you are using a t-mobile HD2, then yes, you may flash the newest t-mo stock rom. Do it from your sd card if you want to remove the HSPL. But you can also remove the HSPL through Cotulla's HSPL 4, just run his exe and choose the latest SPL.
Click to expand...
Click to collapse
Thanks but how do you run it from the SD card? I normally just use cwm for flashing roms, and I want to just purge the phone clean. Then I got to pull up all the info to reflash my new one lol.
Don't remember lawl. Just search it up, there's bunch of other threads asking the same question in here. There's one right now in general.