Where save SMS in I-mate jam tell me loction folder or any program for sms backup because when i hard reset jam all sms are deleted. ........ any one solve my problem.
You can use a tool like Jeyo or make a backup with for example SpriteBackupt, which can also play back only the messages if you want to.
Sprite backup is the best!
I also use smsorganizer that hide sms and make also backups, once hided sms, when you make the backup with SpriteBackup there is also an "Hided" named folder with others (MMS, SMS, EMAIL)
where i find these software
http://www.google.com
ya...spritebackup is the best....ucan even backup all ur software u installed to ur flash ram or SD card....
for jeyo,u can backup ur sms to ur pc and also SD card
hello,i was trying to install smsorganizer.cab,freeware from zedsoft.net,but files inside compressed have not known extensions;does somebody know something?thanks
p.s. zedsoft says just run smsorganizer.cab,but how,if it is a compressed file????
burt said:
hello,i was trying to install smsorganizer.cab,freeware from zedsoft.net,but files inside compressed have not known extensions;does somebody know something?thanks
p.s. zedsoft says just run smsorganizer.cab,but how,if it is a compressed file????
Click to expand...
Click to collapse
dont run the cab file on desktop. put it on your jam using activesync's explorer. then on ppc, execute it
Sunny
Burt devi copiare il file sul PPC e lanciarlo da li !!!
He have to copy cab file into ppc memory, then launch it.
thanks...i've installed it,but unfortunately it seems not work as explained in zedsoft.net,i need to store a lot of old sms and it doesn't seem to do it...
grazie sKizzO,ma la funzione export o backup non mi sembra funzionino;il freeware è "reduced" ma cmq diceva che faceva queste cose..direi ke non va???
Have you ever want to add more programs in the AppLauncher (in TouchFLO3D) but you have no space for more?It's time to add more program tabs.
Firstly,take a registry editor (i highly recommend Total Commander).Ten goto HKLM\Software\HTC\Manila\ProgramLauncher.There create ass many folders ass you want (remember that they have to be named with numbers.I made folders with the names 18,19,20).Then goto an older folder (such as 1,or 15) and copy to clipboard all files.Then goto your new folders and paste that files.
READ THIS PLEASE -> You have to erase the contents of the files you've just pasted,otherwise you have to remove them from the Applaunncher
Ps.I search the forum (diamond section) and I didn't find anything similar to this.If it has been posted before,then delete my thread
EDIT:when you finish with copying and pasting,close touchflo and then open it again)
good move,thanks!
Thanks. It works but for me , only for adding 6 more programs. After adding 23 folder, it wont work..
sosimple said:
Thanks. It works but for me , only for adding 6 more programs. After adding 23 folder, it wont work..
Click to expand...
Click to collapse
prepei na uparxei ena allo kleidi ths registry pou na orizei mexri posa programmata na blaeis.8a to 4a3w kai 8a sou pw
I must be another registry key which tells you up to how many programs you can use.Let me search for that key and I'll tell you
Ps.geia sou re patrida
Επ... Ελληνας εισαι και εσι? Ρε τι κανουμε οι Ελληνες.. Τοσοι χιλιαδες εδω μεσα και ενας Ελληνας το βρηκε.. If you find how to add more than 6 it would be fantastic !
unfortunately,i couldn't found it.I searched the registry and the manila files,but there wasn't a file for the ProgramLauncher.I wonder ,if someone who can have landscape,can do that change at the registry and can have more programs.Can some try it out?(remember that you have to restart TF3D)
Hello,
Here I'm going to explain what I did to translate the English Keyx ROM to Spanish, method applicable to any other language.
The things you need are:
- Keyx kitchen: you can find it in his folder. The ipaq_91x_28011_-_WWE_Kitchen and ipaq 61x 28011 - WWE Kitchen depending on your device.
- Hp original ROM in the language you want to translate to. You go here and you put in your device model. Select your language and go to Windows Mobile 6.1. Download the actualization ROM (about 50 mb).
- The Language Localization Packages 28205 release from Da_G
We have started the translation of our ROM
-------------------------------------------------
You need to unzip the Keyx kitchen into two different folders, A and B. In one of them, you will have the Hp ROM and in the other, Keyx one.
Unzip the Hp .exe file and copy the file FLASH.NBF into A\ROM. Rename it to TEMPLATE.ROM, deleting before the existing one. Go to A\ and execute iPAQ61x_91x kitchen v4 beta.bat. In the window which appear, select extract ROM (1). Then, let the program work.
-------------------------------------------------
Now comes the easy part of the translation. The spanish files in Da_G Language Packages are somethig like XXXX_Lang_0C0A. You will see there also the termination corresponding to your language. In english is XXXX_Lang_0409. So open B\SYS. Every folders in B\SYS which have a _Lang_0409 in his name, look fot them at the Language Packages finishing in _Lang_0C0A and copy from the Language Packages to B. Delete the 0409 ones.
Now we have "translated" the programs. But we need to do the same with the system. Every folders and programs installed at the first startup of the system are included into the initflashfiles.dat file. It is located at A(B)\OEM\OEM_Lang_0C0A(0409). I recomend to copy them both with different names (initflashfilesHp and initflashfilesEng, for example) into a common folder, out of A and B. Now you copy the A\OEM\OEM_Lang_0C0A into B\OEM folder. Delete the A\OEM\OEM_Lang_0409.
NOTE 1: To extract the Hp ROM, is recommended to use the ipaq 61x_91x_flex kitchen, due to this kitchen let you extract almost every ROM. Then, extract as described before, and when finished, if it gives you an error, enter into Temp\dump\OEM and you get there the OEM_Lang_XXXX.
Note 2: The right way to translate is not to copy one folder instead of the other, but to replace every file into OEM_Lang_XXXX wich have the language code (0c0a in Spanish) in the name (including system ones). Is a little harder and lower, but it give then less problems.
The 6xx kitchens are a little bit peculiar at OEM folder. Keyx moved every important files from OEM_Lang to OEM_drivers. So you'll HAVE to do the lower methode of the NOTE 1 explained before between these two folders. If not, when you build the ROM, it will stop saying that they are. This is the way I built the last 61x ROM and it worked.
-------------------------------------------------
The hard part of the work comes now. You have to open the initflashfilesHp and initflashfilesEng together and compare every internal construction. Is parallel, so you will not have any problem to identify the names that change. Rename every construction like Directory("My Documents"):-Directory("My Pictures") or Directory("\Windows")ermDir("Start Menu") into Directory("My Documents"):-Directory("Mis imágenes") and Directory("\Windows")ermDir("Menú Inicio") (spanish case).
Every file translated to your language at the Hp file have to be renamed, because is how the system changes from one location to another.
Here is also where you can select which folders your start menu will create and which programs go at which folder. My initflashfiles.dat is quite better organized and translated than the Hp one p), so you can open it to see how I did it.
-------------------------------------------------
Now is translated (goood!, hurra!) and only rest to build the ROM. To do it, you have to go to B\ and execute again iPAQ61x_91x flex kitchen.bat, but now, selecting (2) build ROM. Let the program work, follow the instructions, and when it finish, go to B\FLASH\ and there is your longed FLASH.DIO ^^
When you have finished this, almost everything should work. If not, ask here and I'll try to fix your problems
-------------------------------------------------
After all this, I think I deserve a beer no? jajaja : P
Good luck!
I would thank you any comments to correct the way I made this tutorial.
Great Norax!!!! I've waited so long fo this!!!! Thanks a lot!
Norax..... I had to cut the first 3432 bytes from FLASH.NBF and then rename it to TEMPLATE.ROM to let the kitchen extract it correctly.
actually you only use hp original rom for OEM folder, for the SYS folder you should use the corresponding lang files released with SYS, using older lang files may cause problem
Sure. I didn't realized I used the Da_G ones. I'm changing it
Samhain77 said:
Norax..... I had to cut the first 3432 bytes from FLASH.NBF and then rename it to TEMPLATE.ROM to let the kitchen extract it correctly.
Click to expand...
Click to collapse
There is no problem if the kitchen does not extract correctly the files. The point is to extract the OEM_Lang_XXXX file. So maybe it didn't finish but you got the OEM_Lang_XXXX file into the temp\dump folder.
If it definitively does not work, tell me and I'll do it for you : )
Should I use the italian initflash.dat form da_G too?
Sorry about the delay. No, if you use the Da_G one, you'll only have the deffault things initialized. As you can see in the Keyx's, there are big differences because everything is organized in another way, inside folders and with some programs and applications missing or added.
So you have to edit the Keyx one, translating all things that have been translated into your language at the Hp initflashfiles.
Tell me if you didn't understand something.
In any case, I'm having problems to translate to Spanish the 6xx. So this tutorial may be only applicable to the 9xx ROMs.
Norax, thank you a lot!!!! With this tutorial I've done the first successfull conversion form english to italian!!!
I need to correct a pair of things but it's almost all working!!!
Just two questions:
How much is the default pagepool size of keyx kitchen?
Why all system is in italian except the shutdown message "Do you really want to shutdown the system"?
Again thanks a lot!!!
Samhain77 said:
Norax, thank you a lot!!!! With this tutorial I've done the first successfull conversion form english to italian!!!
I need to correct a pair of things but it's almost all working!!!
Just two questions:
How much is the default pagepool size of keyx kitchen?
Click to expand...
Click to collapse
I'm not sure, you should look for it at Keyx thread
Samhain77 said:
Why all system is in italian except the shutdown message "Do you really want to shutdown the system"?
Again thanks a lot!!!
Click to expand...
Click to collapse
It happends also to me with the spanish one, so don't you worry about it, it seems to be untouchable.
-my default pagepool is always 16, you can check by using the pagepool changer under FLASH folder, when you change pagepool there is a logfile which tell you the original pagepool size
-the shutdown message probably in resources file that is under common sys (i.e not under the lang folder i suppose)
keyx said:
-my default pagepool is always 16, you can check by using the pagepool changer under FLASH folder, when you change pagepool there is a logfile which tell you the original pagepool size
-the shutdown message probably in resources file that is under common sys (i.e not under the lang folder i suppose)
Click to expand...
Click to collapse
Thanks a lot.
Norax, comencé a cocinar la ROM ipaq_61x_28230_-_WWE_Kitchen como dice el Tuto y en el primer paso, luego del 1, me indica que:
Place the FLASH.DIO you want to extract in the ROM directory and rename it to
'TEMPLATE.ROM'
ATTENTION: the previous OEM/SYS/XIP folders will be deleted!!
Type 'yes' to continue: yes
Comienza a realizar la operación y da error en:
**************************************
ERROR - partition table wrong!
Cannot map file imgfs_raw_data.bin
El sistema no puede hallar la ruta especificada.
El sistema no puede hallar la ruta especificada.
El sistema no puede hallar el archivo especificado.
"xidump" no se reconoce como un comando interno o externo,
programa o archivo por lotes ejecutable.
Extracting XIP ...
***********************************************************
msflsh50dump v0.1 code by blueboy
***********************************************************
the file is not a msflsh50 format
**************************************************
SRPX2XIP v0.2 code by blueboy
**************************************************
usage:SRPX2XIP srpxfile [xipfile]
fread: No error
facundoo said:
Norax, comencé a cocinar la ROM ipaq_61x_28230_-_WWE_Kitchen como dice el Tuto y en el primer paso, luego del 1, me indica que:
Place the FLASH.DIO you want to extract in the ROM directory and rename it to
'TEMPLATE.ROM'
ATTENTION: the previous OEM/SYS/XIP folders will be deleted!!
Type 'yes' to continue: yes
Comienza a realizar la operación y da error en:
**************************************
ERROR - partition table wrong!
Cannot map file imgfs_raw_data.bin
El sistema no puede hallar la ruta especificada.
El sistema no puede hallar la ruta especificada.
El sistema no puede hallar el archivo especificado.
"xidump" no se reconoce como un comando interno o externo,
programa o archivo por lotes ejecutable.
Extracting XIP ...
***********************************************************
msflsh50dump v0.1 code by blueboy
***********************************************************
the file is not a msflsh50 format
**************************************************
SRPX2XIP v0.2 code by blueboy
**************************************************
usage:SRPX2XIP srpxfile [xipfile]
fread: No error
Click to expand...
Click to collapse
Como ya dije anteriormente, no debes usar la opción 1 si lo que quieres es construir la ROM. La opción 1 es para extraer los datos de un FLASH.DIO, pero si estás usando la cocina de Keyx, no te hace falta (es más, da error al extraerla, como te ha ocurrido).
Por tanto, modifica los datos del SYS y del OEM para cambiar el idioma, y selecciona la opción 2 cuando ejecutes el .bat para construir el FLASH.DIO.
As I sayed recently, you shouldn´t use the 1st option when you want is to bouild a ROM. The option 1 is to extract the data from a FLASH.DIO you already have. But if you are using the Keyx kitchen, is not necessary (in fact, if you do you'll have an error, as it happened to you).
So then, modify the SYS and OEM folders to change the languaje, and then use the option 2 of the .bat file to build the FLASH.DIO file.
1. i've got same problem like facundoo with sprx2xip
2. I want to translate WM 6.1 but i've got only lang files from DA_G to WM6.5, do you have lang files for 6.1?
timon12 said:
1. i've got same problem like facundoo with sprx2xip
2. I want to translate WM 6.1 but i've got only lang files from DA_G to WM6.5, do you have lang files for 6.1?
Click to expand...
Click to collapse
Ok. Now I remember what happened. When you extract the Hp ROM from the .DIO file (renamed to TEMPLATE.ROM), it will say there was a problem extracting, but if you look into the temp folder, you'll find the longed language package
Use the ipaq 61x_91x_flex kitchen, then extract as described in the tutorial (that I'm changing now to introduce this info), and finally, when finished, enter into Temp\dump\OEM and you get there the OEM_Lang_XXXX.
Hope this fix the problem. If not, insist this way
Hi, thanks for the info on that other thread ^_^
I need more help please.
Ok, I added/removed/edited whatever I wanted and I'm at the proccess of translating initflashfiles.dat, since there's no official greek rom.
I got the latest version of initflashfiles.dat I could find (14/2/10) and it all comes back to me now. the 0408 version, instead of proper folder names like "Τα εγγραφά μου" (for "My Documents") has a weird string, "\x004D\x0079\x0020\x0044\x006F\x0063\x0075\x006D\x0065\x006E\x0074\x0073". I presume it's character sets but I have no idea how I can translate that so I can find what I should change in the kitchen's initflashfiles.dat. Last time I just used the naming conventions from my omnia's 6.1 rom, it worked but I got some duplicate entries and I got stuck with the welcome screen on every boot. Other than that I was pretty happy for a first attempt. I'm trying to do a proper job this time, and learn during the proccess. What should I do?
Also, is there any way to use the standalone device emulator to test the rom so I don't have to flash each time to test?
EDIT: oh, there's an official rom for 914, I'll try extracting that and see where I can get, my questions still stand though
acrocosm said:
Hi, thanks for the info on that other thread ^_^
I need more help please.
Ok, I added/removed/edited whatever I wanted and I'm at the proccess of translating initflashfiles.dat, since there's no official greek rom.
I got the latest version of initflashfiles.dat I could find (14/2/10) and it all comes back to me now. the 0408 version, instead of proper folder names like "Τα εγγραφά μου" (for "My Documents") has a weird string, "\x004D\x0079\x0020\x0044\x006F\x0063\x0075\x006D\x0065\x006E\x0074\x0073". I presume it's character sets but I have no idea how I can translate that so I can find what I should change in the kitchen's initflashfiles.dat. Last time I just used the naming conventions from my omnia's 6.1 rom, it worked but I got some duplicate entries and I got stuck with the welcome screen on every boot. Other than that I was pretty happy for a first attempt. I'm trying to do a proper job this time, and learn during the proccess. What should I do?
Also, is there any way to use the standalone device emulator to test the rom so I don't have to flash each time to test?
EDIT: oh, there's an official rom for 914, I'll try extracting that and see where I can get, my questions still stand though
Click to expand...
Click to collapse
Yes, that's the way. In fact, what I did was to develop the spanish one, which is basicly like the English one but in Spanish, to have everything a little bit more ordered. And when I was proposed to do ir in Chinese and Polish, I only had to translate to the other languages what was in Spainsh, and don't touch what was still in English. At the end, however, I had the same problem as you. But doing it this way, it's easier to not to wrong any name.
The thing is that is quite confusing that, for example, the Windows folder is also called with numbers, but sometines it appears the Winows itself. So let me finish our tests in THIS forums so I can give you an answer.
Of course, if you finally got an usable ROM, please, send to me your initflashfiles.dat, so I can see how you did it
I can't extrct the rom properly, SRPX2XIP crashes and the extraction doesn't get far enought to get initflashfiles from the temp dir. Oh well, I'll do the tranlation again. Sure, I'll post my file when done. I'm trying to make the rom a bit lighter so some of the extras will be missing though.
What about the emulator? Can we use it for testing the rom?
acrocosm said:
I can't extrct the rom properly, SRPX2XIP crashes and the extraction doesn't get far enought to get initflashfiles from the temp dir. Oh well, I'll do the tranlation again. Sure, I'll post my file when done. I'm trying to make the rom a bit lighter so some of the extras will be missing though.
What about the emulator? Can we use it for testing the rom?
Click to expand...
Click to collapse
No, I couldn't test it because as far as I know, is not possible to change the emulator that way. We should try it, any way. But I'm at this moment quite busy If you find a way, tell me and we can see how to do something.
Try to extract through the ipaq 61x_91x_flex kitchen. This gives also an error, but it extract all the ROM files, including the initflashfiles.dat. Try it and tell me
Hi,
For those of you who already switched to the great ROM of Endless, you maybe have seen that your physical AZERTY keyboard isn't recognized on your favorite default language.
Here are the steps make your best wishes coming true (Based on the nightly 20110909 v3+ but should be functional on other versions) :
1/ Boot until you see your blue light and press "vol -"
2/ Connect your phone on your PC and go on tools>share system
3/ Unpack AZERTY.zip. Those two files come from the original sbf 2.2.2 from motorola (thanks to the great program unyaffs )
4/ Copy bin file to /usr/keychars and kl file to /usr/keylayout
5/ Rename qwerty.kcm.bin to qwerty.kcm.bin.old
6/ Do the same to qwerty.kl > qwerty.kl.old
7/ Rename umts_milestone2-keypad.kcm.bin to qwerty.kcm.bin
8/ Rename umts_milestone2-keypad.kl to qwerty.kl
9/ Unmount your filesystem
10/ Reboot and you're done
The next step is discussing with Endless to find a solution to link it to the language parameters to do it automatically
Hi, I will shortly upload an update.zip containing both azerty layout and stock contacts and mms apk, which have french support... I'll try to do this today...
Cet update.zip compatible CWM 3+ installe la disposition AZERTY du clavier physique, ainsi que les applis contacts (carnet d'adresses et téléphone) et mms en français .
Installez ceci à vos risques et périls !!! Faites une sauvegarde nandroid avant!!!
Edit : Here it is :
http://www.mediafire.com/?wuldtz1vwkkvf9i
I'm backing up, I'll test it afterward !
Works fine ! Thanks Momus !
momus87 said:
Hi, I will shortly upload an update.zip containing both azerty layout and stock contacts and mms apk, which have french support... I'll try to do this today...
Cet update.zip compatible CWM 3+ installe la disposition AZERTY du clavier physique, ainsi que les applis contacts (carnet d'adresses et téléphone) et mms en français .
Installez ceci à vos risques et périls !!! Faites une sauvegarde nandroid avant!!!
Edit : Here it is :
http://www.mediafire.com/?wuldtz1vwkkvf9i
Click to expand...
Click to collapse
Updated tonight to 0913 v2.1.
Applied your update after.
Seems working like a charm.
Thanks.
momus87 said:
Hi, I will shortly upload an update.zip containing both azerty layout and stock contacts and mms apk, which have french support... I'll try to do this today...
Click to expand...
Click to collapse
Hi,
Do you know how to disable popu for messages. In the english version i found it, but i don't know where to disable it in the stock version.
Kind regards,
What kind of notification?
Popup in status bar or toast (in a temporary window in the middle of the screen?)
momus87 said:
What kind of notification?
Popup in status bar or toast (in a temporary window in the middle of the screen?)
Click to expand...
Click to collapse
It's about toast
hexagram said:
Hi,
1/ Boot until you see your blue light and press "vol -"
2/ Connect your phone on your PC and go on tools>share system
Click to expand...
Click to collapse
I can't access the system storage in windows it's says I have to format before I can access
Should I format or is there any other way?
Never mind used adb shell to change the files
momus87 said:
What kind of notification?
Popup in status bar or toast (in a temporary window in the middle of the screen?)
Click to expand...
Click to collapse
Now the keyboard configuration is included in the rom, do you think you can repackage only sms and dialer ?
These two apps are already provided by Endless7 at the bottom of the first post, in CM7 thread. (stock_apps_cm7.zip)
You can install it the same way as you did for my former update.