Hi! After flash my Acer S200 don't start. Just write : Cleen Boot ACER.
If someoane can help me I waitt your sugestion. Thank's very mutch.
surdu_petru said:
Hi! After flash my Acer S200 don't start. Just write : Cleen Boot ACER.
If someoane can help me I waitt your sugestion. Thank's very mutch.
Click to expand...
Click to collapse
What ROM did you flash? sounds like a bad flash... reflash, or try a different ROM
Hello!
Thank's very much, but how can I reflash if the phone dosen't start?
If someoane have the same problem please tell me how can I reflash the phone. Thank's .
surdu_petru said:
Thank's very much, but how can I reflash if the phone dosen't start?
If someoane have the same problem please tell me how can I reflash the phone. Thank's .
Click to expand...
Click to collapse
you didn't break your device , you can reflash it following the flash instructions included , for an example , in rafyvitto's rom's post .Just have a look there .
surdu_petru said:
Thank's very much, but how can I reflash if the phone dosen't start?
If someoane have the same problem please tell me how can I reflash the phone. Thank's .
Click to expand...
Click to collapse
If it dosnt start by camera press button and hold then reset button(this puts device in bootloader mode) if that doesn't place your device in bootloader mode its brick't, thats is if you have the 1.00 radio.
Hi!
rafyvitto said:
If it dosnt start by camera press button and hold then reset button(this puts device in bootloader mode) if that doesn't place your device in bootloader mode its brick't, thats is if you have the 1.00 radio.
Click to expand...
Click to collapse
Thank's Rafyvitto , but I press camera button end hold reset , the phone don't start, just write in black screen with white : S200_3.003b.00_EN
Clean Boot
acer
end don't work , don't start . I waitt 1 hour but the screen dosen't change , it's the same screen like begining. I don't know what I make , maybe I flesh it with a wrong rom , but now if you know ? it's posibile flash again or make something for start , if the phone don't start? Thank's very much....
You can save it, cause the screen that says "clean boot" is the bootloader, so you just need to press the bootloader combination of the 2.00 radio, press power + volume + camera holding all these press reset, if you see a red led blinking then its in bootloader mode, and you can flash your device.
Hi!
rafyvitto said:
You can save it, cause the screen that says "clean boot" is the bootloader, so you just need to press the bootloader combination of the 2.00 radio, press power + volume + camera holding all these press reset, if you see a red led blinking then its in bootloader mode, and you can flash your device.
Click to expand...
Click to collapse
I will try now. Thank's again.
Hi!
rafyvitto said:
You can save it, cause the screen that says "clean boot" is the bootloader, so you just need to press the bootloader combination of the 2.00 radio, press power + volume + camera holding all these press reset, if you see a red led blinking then its in bootloader mode, and you can flash your device.
Click to expand...
Click to collapse
No, my Acer S200 don't want to start reflash, I try exactaly end the red led is blinking but the all the flash rom don't start....just say update failure veryfi the connection USB. I trying with the Acer_EUU haker version 1 end 2. I thing that the phone is dad. Maybe is another solutions? I waitt...Thank's again, very much.
Heelo!
If you know , maybe it 's an solution for boot the rom on the storage card ? I thing , if the phone don't connect with the pc with usb cable is normaly that the flash don't start, maybe if I put the rom on the storage card then the phone will try to boot on the storage card, but I don't know how to make that. Thank's again.....
Hi!
Greats thank's again Rafivitto! I will try press cammera + volume + power end reset and the phone start the reflash. Merci beaucup.....
Hy all!
I have problem with clean boot logon... I done hard reset and device stuck at Clean Boot logon...
Would like to know how to flash it without activesync? I downloaded OEM ROM just can not install it without the NeoTouche beeing synchronized via active sync...
Please help how to do that without active sync...
Hi!
matjazz said:
Hy all!
I have problem with clean boot logon... I done hard reset and device stuck at Clean Boot logon...
Would like to know how to flash it without activesync? I downloaded OEM ROM just can not install it without the NeoTouche beeing synchronized via active sync...
Please help how to do that without active sync...
Click to expand...
Click to collapse
You need active sync for flash your s200 , so you plug usb cable between pc end phone with micro usb. After that you need to entre in bootloader mode ( for bootloader mode you need press simultanly power , camera end volume end reset while the red led is blinking) . If your led red is blinking then you can start flash rom with any flash , but I recomanded for you an original flash with ACER_EUU.exe hack , not originaly for that just download hack acer_euu.exe end replace it in directory flash rom. If you still can't make the reflash I need to know what is your version of rom? Your version is in the left corner on the first line. See you later....
update failed
Hello,
I wanted to update Neotouch from official rom 2.003.00_de to 3.003c.00_de.
The update failed and when i start the device, now I see on display:
- in the upper left corner: s200_3.003c.00_DE
- in the middle "clean boot"
- under it "acer"
I tryed to go in the bootloader mode:
I removed the Akku for ca. 10sek.
I connected device and PC via usb.
I pressed Volume down + camera buttons together, then the power button and when it starts to blinking the LED red, I press reset with the pen.
The LED is blinking red, but the display is black?
(it is correct?)
Then I started on PC the "EUU_Acer_S200_3.003c.00_DE_03.03.08_3.003c.00_20100205.exe"
...extracting...install prompt...ok...
window: "welcome to the device software update utility" etc. with the notifications to connect
... next..
and then:
"Update failed. The device software utility occurs trouble connecting to your device"
what am I doing wrong?
surdu or other , can you help?
Thanks!
I unpacked the originial
"EUU_Acer_S200_3.003c.00_DE_03.03.08_3.003c.00_201 00205.exe"
and replace the "ACER_EUU.exe" with
File
from this Thread
http://forum.xda-developers.com/showthread.php?t=628402
Then I clicked the "EUUFrontEnd.exe" and the "install prompt" started, then for a second, there is an Error window.
I searched in the posts here in neotouch forum for this problem, but idont understand much and my english is very bad.
Iam only user, I have no background knowledge. Please help me, if you can.
did you bring your device on "flash mode"?
what rom does it have now?
When I bouhgt mine I did excactly the same thing
It had 2.003.... official ROM and I flashed it with the new official 3.003b.....
camera+reset and then the steps as you did.
maybe it's something in the 3.003c drivers and the hacked .exe does not work..
Philippe_Raimo said:
did you bring your device on "flash mode"?
what rom does it have now?
Click to expand...
Click to collapse
1. I do not know exactly...
"I pressed Volume down + camera buttons together, then the power button and when it starts to blinking the LED red, I press reset with the pen.
The LED is blinking red, but the display is black?
(it is correct?)"
Is this really the Bootload Mode?
2. see my Post Nr. 14
Now i can see upper left corner: s200_3.003c.00_DE
maybe it's something in the 3.003c drivers and the hacked .exe does not work..
Click to expand...
Click to collapse
mmh..what should i do...
Hi!
olsching said:
1. I do not know exactly...
"I pressed Volume down + camera buttons together, then the power button and when it starts to blinking the LED red, I press reset with the pen.
The LED is blinking red, but the display is black?
(it is correct?)"
Is this really the Bootload Mode?
2. see my Post Nr. 14
Now i can see upper left corner: s200_3.003c.00_DE
Your phone S200 is not dead, you can save it, but is 2 way from the led red blinking, if your led red is on/off very well then is the bootloader, if the red led is blinking with have a small break (off) then you aren't in bootloader. Then you need press the Volume down + camera buttons + power button + reset with the pen , all the button togheter, while the red led is blinking (on / off) quickly end now you are in bootloader. After that you need Acer_EUU.exe Hack version v1 ( is exactaly - 3.432.960k ) .Just replace it end go. Good luck!
Click to expand...
Click to collapse
Hi Olscing! again
from this Thread
http://forum.xda-developers.com/showthread.php?t=628402 you download Hack v2 is no't good for you. You need v1 end the Acer S200_2.003.00_EN.
neotouch is running again
Thanks for your help surdu!
But now i could help myself
I flashed a customrom here from the forum. It stopped at 99,2%!
But the device was able to start and the rom runs.
Then i started the official acer update again and without problems it was installed. Now i happy again!
Related
hi
i flashed 1pcs s200 after flashed dont power on.
dont go to boot mode.
how can i restor to old rom or new?
best regards
did you try to hard reset?
did you try to hard reset?
search the stickys to find how, (hold power, camera, press reset, keep holding p+c until you see a question on the screen, then press green phone
qwazix said:
did you try to hard reset?
search the stickys to find how, (hold power, camera, press reset, keep holding p+c until you see a question on the screen, then press green phone
Click to expand...
Click to collapse
thanks but can not work?
same problem phone only white blink and cant enter boot mode...
elektronat said:
same problem phone only white blink and cant enter boot mode...
Click to expand...
Click to collapse
What can your device do? Does it turn on? Does it respond to charging?
with charge only red LED... but phone white blink ..
elektronat said:
with charge only red LED... but phone white blink ..
Click to expand...
Click to collapse
1. did you try another battery?
if it seems to boot ( with boot up sound, but white screen ) then go to step 2.
2. reset you LCD display, how?
- disconnect the LCD cable,
- after 10 second,
- connect it back to the mainboard.
Good Luck.
ı have same phone and same error..
Customer try it ROM upload after phone dead... With charge phone some time RED LED.. but LCD white blink very fast.. PHONE cant enter BOOT mode, ı try 2-3 batery but no result ı think BOOT dead
Guys,
You said you flashed your ROM but give no details
Tell us what you have done in detail and someone might be able to help, like me
Did you hardspl properly? Did you use correct version ie G3 or G4. If u have used wrong one, ur pretty [email protected]
More detail plz
Hi, I was in the middle of Flashing my Acer Neotouch S200 when the usb got knocked out. I now cannot get back into bootloader mode at all. I try to do this by holding the camera, volume and power buttons while holding down the reset button.
I simply go into the clean boot screen where it is stuck. Please, please help! Is there anything that will let me flash it again?
One other thing, if an microSD card is inserted into the slot and I try to get it into bootloader mode, the blue led turns on then the red led flashes twice every 5 seconds. Is that normal because it did it before the flashing process was interrupted but when I took the microSD card out the PC would recognize it to be in bootloader mode.
I tried looking on other posts but nothing worked
Problem Solved!I managed to get it into bootloader mode by pressing volume down, camera and power buttons while holding down reset rather than having both volume buttons.
did you do backup?
please i need an English rom to install in my s200 neo touch acer. my acer s200 is stuck in clean boot, i was able to get to bootloader and my acer usb port was installed on my pc, now i need to flash and installed a new rom but i dont have a rom and dont know how to installed it. please helpppppppppppppp. my acer rom is s200_2.003.00_IT but i want an english rom as this one is in italy. Thanks
owltop420 said:
Hi, I was in the middle of Flashing my Acer Neotouch S200 when the usb got knocked out. I now cannot get back into bootloader mode at all. I try to do this by holding the camera, volume and power buttons while holding down the reset button.
I simply go into the clean boot screen where it is stuck. Please, please help! Is there anything that will let me flash it again?
One other thing, if an microSD card is inserted into the slot and I try to get it into bootloader mode, the blue led turns on then the red led flashes twice every 5 seconds. Is that normal because it did it before the flashing process was interrupted but when I took the microSD card out the PC would recognize it to be in bootloader mode.
I tried looking on other posts but nothing worked
Problem Solved!I managed to get it into bootloader mode by pressing volume down, camera and power buttons while holding down reset rather than having both volume buttons.
Click to expand...
Click to collapse
You Done Good Thing for Correct Bootloader Mode Instruction. . .
Thanks For Share Buddy!
Now You Can Search in google this >>> OS_ACER_2.003.00.EN_WM65_neoTouch
and Install ENGLISH ROM!
Good Luck!
Hello everybody ,
I have a Defy and .. is dead ! The RSDLite dont show the device .. and .. i try the instructions from http://forum.xda-developers.com/showthread.php?t=1618718 .. but no result ..
i cant restore sbf with RSDLite and .. the phone does not leave the screen
Details.. what do you see on screen?. Where are you stuck at?
Is your battery charged??
Sent from my Defy+ using Tapatalk 2
yeah .. the battery is charged ..
when i turn on .. dont show nothing .. the led is aways off. .. sometimes turn on white .. nothing more ..
in rsdlite .. the phone dont show ..
tiagomoraisc said:
yeah .. the battery is charged ..
when i turn on .. dont show nothing .. the led is aways off. .. sometimes turn on white .. nothing more ..
in rsdlite .. the phone dont show ..
Click to expand...
Click to collapse
are u able to go in Boot loader MOD?
press Volume+ key and Power on the phone..
it will go to BL Mod CONNECT PHONE TO PC VIA USB open RSD Lite
then RSD Lite will Recognize your phone
then flash your SBF
1.Download RSD lite v5.3.1 or later version and install it.
2.Download MotoDev USB drivers from here (http://bit.ly/K59zlZ and install it.
3.Turn off your phone
4. Hold down Volume Down and Power button for your phone to enter Stock Recovery.
5. Press both Volume buttons at the same time for the options to appear.
6. Do wipe cache.
7. Do wipe data/factory reset.
8.Take your battery out.
9.Hold Volume Up and Power button and put the battery back in while holding the buttons - your phone will start in Bootloader mode.
10.Connect the phone which is now in the Bootloader mode to the PC.
12. Open RSDLITE which you have installed and select the Downloaded sbf
13.Click "Start"
14. You can see "SW Update in progress" on your phone's screen - the flashing is in process.
15. The flashing process takes around 5 minutes, after which RSD lite will reboot your phone.
16. Wait until RSD lite says "PASS!" and then you're free to disconnect your phone (*if RSD lite doesn't say "PASS!" after 2-3 minutes and your phone has booted up, you're still free to disconnect).
17. Root your phone using Doomlord's script or SuperOneClick.
18. Install SndInit for defy+ from here.http://dl.xda-developers.com/attachd...itDefy_2.3.apk
If you need any more info on how to root or flashing the rom, Please ask and stay away from trouble.
Tanks Anands3 ...
but .. my phone dont show in RSDLite .. and .. dont enter in Stock Recovery screen ...
when i press Volume+ and Power ..
nothing happens ...
tiagomoraisc said:
Tanks Anands3 ...
but .. my phone dont show in RSDLite .. and .. dont enter in bootloader screen ...
when i press Volume+ and Power ..
nothing happens ...
Click to expand...
Click to collapse
It might won't show up but try this..
Press volume+ & Power button. Even if the screen remains blank, connect it to RsdLite. If it shows up in RsdLite, flash the SBF.
If it doesn't, then unfortunately, its bricked.
Sent from my Defy+ using Tapatalk 2
Ok ... this screen need show ..
so, i will get other batery with a friend ..
and will try again ...
later i talk about ..
tanks guys !
Hummm ... bad news .. !!!
When i hold Volume (-) & Power .. the phone dont enter in Stock Recovery screen!
The only thing that happens is: LED lights in WHITE, when I connect to the computer. just it!
what i can do now?!
Did you change the battery with a one that is charged FOR SURE?
same problem last several days and i fixed it:
+remove battery and put it back (make sure battery full charged)
+press power button and volume+ for 5 secs,even the screen still black
+connect to computer,u can see white led and RSD lite will display usb connected
+flash *.sbf
if it doesn't work u can try with another computer or cable
good luck!
Auris 1.6 vvt-i said:
Did you change the battery with a one that is charged FOR SURE?
Click to expand...
Click to collapse
Yeah ..
i try with other batery ..
And still no luck?
haiwru said:
same problem last several days and i fixed it:
+remove battery and put it back (make sure battery full charged)
+press power button and volume+ for 5 secs,even the screen still black
+connect to computer,u can see white led and RSD lite will display usb connected
+flash *.sbf
if it doesn't work u can try with another computer or cable
good luck!
Click to expand...
Click to collapse
Hey man .. tanks . but ...
When i press Volume+ & Power nothing happen ..
when i conect the phone to computer nothing happen in RSDLite ..
so .. i cant flash a .sbf file ..
and .. i try with other cable .. and .. no response ..
i have a big problem!
When you connect, does it turns White LED on??
Sent from my Defy+ using Tapatalk 2
when i connect the LED is White .. just it
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
talakoto said:
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
Click to expand...
Click to collapse
Seems your problem is flashing sbf with too low CG version - sbf u mentioned is CG5 Chinese eclair. Depending of what u had before u can install CG6 or CG7 sbf from this site
talakoto said:
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
Click to expand...
Click to collapse
Try flashing the last rom that worked for you.
Sent from my Defy+ using Tapatalk 2
corrinti said:
Seems your problem is flashing sbf with too low CG version - sbf u mentioned is CG5 Chinese eclair. Depending of what u had before u can install CG6 or CG7 sbf from this site
Click to expand...
Click to collapse
im currently trying all of the roms listed on the link you gave...
some gave me error Err:A5,69,35,00,27 on bootloader... (seems much better status than before)
some gave me nothing... (just like before - blank screen, no led)
17 more roms to go...
talakoto said:
im currently trying all of the roms listed on the link you gave...
some gave me error Err:A5,69,35,00,27 on bootloader... (seems much better status than before)
some gave me nothing... (just like before - blank screen, no led)
17 more roms to go...
Click to expand...
Click to collapse
i flashed the ROOTED EU CEE rom from this thread http://forum.xda-developers.com/showthread.php?t=1542956
THIS ROM CAN'T DOWNGRADE,TRY IT IF U HAVE NOWAY TO LET YOUR PHONE ALIVE
hey u all
my phone is a brick ...:crying:
jast used RSD Lite and the .SBF pass = ok but when the motorola defy try to move on the computer says "usb unrecognized"
what can i do from here ? please help me its an emergency.
tnx alot :good:
the screen is black\not responding when i push the power on ... im not geting the motorola logo :crying:
what can i do ?
only the power light is on when im charging the phone...
please help me :good:
Pic status of my motorola defy
The phone is jammed like this - please what can i do ?
Can you boot into bootloader? (Power + Volume up)
Install motorola drivers for pc, install rsd, enter the bootloader with power+volume up buttons like xiihyou said, then connect your phone via usb to pc and start the rsd proces flashing....
Should Help
The same happen to me , solution is simple .....
Just Install drivers ( HERE http://forum.xda-developers.com/showthread.php?t=1100585)
Pull out battery, now put it back with Power button and Volume up pressed together
you should be in bootloader mode
Now choose the right SBF file for your Phone .....
After you Defy boots up, Shut it down -> wipe data and cache ( Press Power button and Volume Down)
And now your mobile should be OK
xiiihyou said:
Can you boot into bootloader? (Power + Volume up)
Click to expand...
Click to collapse
no..what can i do from here ?
tnx ?
yzeroy said:
The same happen to me , solution is simple .....
Just Install drivers ( HERE http://forum.xda-developers.com/showthread.php?t=1100585)
Pull out battery, now put it back with Power button and Volume up pressed together
you should be in bootloader mode
Now choose the right SBF file for your Phone .....
After you Defy boots up, Shut it down -> wipe data and cache ( Press Power button and Volume Down)
And now your mobile should be OK
Click to expand...
Click to collapse
did that but still cant get the phone into bootloader
the phone is connected to the computer (usb) but there is only a white light on the top screen that it :crying:
please help me what can ido from here ?
tnx alot.
i had a similar problem, i couldn t turn on the phone or enter the bootloader, it was just a black screen... then i just install the drivers on pc and start a rsd without entering the bootloader, it worked for me....
tuneon said:
did that but still cant get the phone into bootloader
the phone is connected to the computer (usb) but there is only a white light on the top screen that it :crying:
please help me what can ido from here ?
tnx alot.
Click to expand...
Click to collapse
So just start flashing SBF it must work .... (you may needn´t get phone into bootloader mode because it is in bootloader mode)
yzeroy said:
So just start flashing SBF it must work .... (you may needn´t get phone into bootloader mode because it is in bootloader mode)
Click to expand...
Click to collapse
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
tuneon said:
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
Click to expand...
Click to collapse
First of all check your battery. Charge it using external charger or use mcgyer methode.
Sent from my Motorola Electrify using Tapatalk 2
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
franky.frangi said:
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
Click to expand...
Click to collapse
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
lferlito said:
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
Click to expand...
Click to collapse
No, it goes into logos loop.
franky.frangi said:
No, it goes into logos loop.
Click to expand...
Click to collapse
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
lferlito said:
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
Click to expand...
Click to collapse
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
franky.frangi said:
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
Click to expand...
Click to collapse
on my L5, i long press those 3 buttons until LG logo boot appears..
i wait some second and it appears the CWM reco
i don't know if there are other ways to enter in recovery mode..
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
franky.frangi said:
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
Click to expand...
Click to collapse
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
did forcing recovery/download work ?
TahaX said:
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
Click to expand...
Click to collapse
the phone off usb in and buttons did it work ?
Actually didn´t work,I have drivers already, LG PC Suite program , and KDZ. Problem is my phone is not detected by pc, so kdz unzips and then says : phone not detected, with or without battery...doesn´t go into recovery mode with buttons, just lg and cyanomod logos...
I don`t know if this can b fixed.....How can you flash anything if it´s not detected....
I´ll give it a try again tomorrow, without trying to enter recovery mode....but tried lots of buttons combinations and wasn´t working
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
IGGYVIP said:
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
Click to expand...
Click to collapse
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
franky.frangi said:
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
Click to expand...
Click to collapse
happy flashing