Hey guys I have a question...
Is it possible to print using my HTC HD2?
As in, directly print from my HTC HD2 to say a USB printer? (via perhaps a cable.. I think the printer uses a USB-B -> USB-A, so I would need a micro USB -> USB-A)?
Is that possible?
If it is... what would I need? (software, cables, and what not)
Thanks
Edit: The printer is a T522 Lexmark printer by the way, and lets assume I don't have a network connection (its complicated).
Anybody?
simply....... no.that would require the phone being capable of operating as a usb host, which it isn't.
there is a thread looking in to maybe getting usb host working but don't hold your break for itany time soon
maybe using pictbridge fonction if the printer support this
you can print via bluetooth or via network using Jetcet print. Check this app, it is default app in leo
ChaosGenesis said:
Anybody?
Click to expand...
Click to collapse
Use the built-in JETPRINT5 - it allows you to print via bluetooth connection although I never tried this on my own.
Related
I know that connection to the internet can be achieved via USB&ActiveSync or Wifi. But can the device be connect to the internet via normal Ethernet plug on my (non-wireless) router. Which adapters are required to do so? At home I do not have a wireless router so I am wondering if this is possible…
And, can auto charger for my Hermes (TyTN) be also used for Athena??
Thanks again
Uros
Buy a cheap wireless access point (with no router) and connect it to the port on your wired only router.
the phone may also connect to the internet via bluetooth
and yes i believe the charger from your hermes should work
Usb voltages are the same pretty much
Thanks. Would this device called "Macally 5-in-1 USB Combo Kit" allow this?
see -> http://www.mobileplanet.com/p.aspx?i=115169
Which Bluetooth device do you recommend?
Uros
cerk2006 said:
Thanks. Would this device called "Macally 5-in-1 USB Combo Kit" allow this?
see -> http://www.mobileplanet.com/p.aspx?i=115169
Click to expand...
Click to collapse
No. That's just a bunch of connectors. It won't help your situation.
I still think Pyrofer's sollution is the best one (second post).
any bluetooth dongle should work
but ideally speaking if u can afford it go for the wireless access point it will cost a little more than a bluetooth but its well worth the extra 10-15 bucks
Guys, many thanks for your opinion. Any yes, am I aware the wireless solution is the best way to go.
Nonetheless I would like to stay "wired" for some time more. Reason is that I have two small kinds and we are leaving in a small apartment. I would like to prevent exposing them to any unnecessary "wireless" technologies as long as possible, at least now when they are growing up.
So, once again I am asking you: is there an adapter between Ethernet plug (RJ-45) and (mini) USB on the Athena and will eventually connection to the internet work?
There is NO wired adaptor for the Athena. The closest you can get is a USB lead and activesync, then use the PCs internet connection.
USB to Ethernet Adapter ???
Thanks all for your feedback!
What about this device: USB 2.0 to RJ-45 Ethernet Adapter
(http://www.pacificgeek.com/product.asp?ID=42665&C=212&S=-1) in combinatin with 4 in 1 cable?? Could this work??
(Or http://www.geeks.com/details.asp?invtid=HE-130R&cat=NET)
Does it come with A PocketPC driver? If not, no use.
If it doesnt say it comes with PPC drivers, i doubt it does.
You are right, Pyrofer, it doesn't support the PPCs
But maybe this one does: http://www.clarinetsys.com/en/product-ea104.htm,
I just need to check the price...
cerk2006 said:
You are right, Pyrofer, it doesn't support the PPCs
But maybe this one does: http://www.clarinetsys.com/en/product-ea104.htm,
I just need to check the price...
Click to expand...
Click to collapse
On the web site, it says:
Supports PPC 2002/2003/2003SE, CE5/4.2/4.1 and Windows® Mobile 5.0 (coming soon)
I am not sure it means the driver for WM5 is coming soon.
cerk2006 said:
Nonetheless I would like to stay "wired" for some time more. Reason is that I have two small kinds and we are leaving in a small apartment. I would like to prevent exposing them to any unnecessary "wireless" technologies as long as possible, at least now when they are growing up.
Click to expand...
Click to collapse
Ummm, you want to protect them from wireless radio waves? I take it you leave the phone in flight mode when in their presence, don't use Microwave ovens in your house, haven't got cordless phones e.t.c.? Sorry, don't want to bash your views, but there IS an awful lot of paranoia put out by the media and many people who jump on the bandwagon before establishing the facts.
As for sharing the internet, I know you can do it from PC->Ameo V easily with the included 'internet sharing' applet. I do it via BT, but USB works equally well.
I came across this the other day
http://htc-vogue-100.handster.com/software.php?id=3339&for=HTC+Vogue+100
It uses the vogue's USB-Host??? Does the vogue have USB-Host driver???
I'm only asking because i'm interested in using Zeno USB host drivers http://forum.xda-developers.com/showthread.php?t=480899, but the device requires to have usb-host.
thoughts?
thanks.
I'm not sure what your intentions are, but if it's just for use at home, use MyMobiler. It's free and allows you to control your device throught your PC.
Hey guys,
I have a small problem with the printing software.
At home, we got a "network printer", that means the printer is connected with our router (T-Com Speedport W900V) over an USB-Cable.
So actually its not a '"pure" network printer, because you map them as a local printer in Windows. Just the port is set to "Standard TCP/IP-Port" and mapped as "speedport.ip"
Now my question: Is it possible to address this printer directly like in Windows with our software? Or is it just possible over "Workgroup" and a running PC? (this option works flawlessly)
greetz
playdo
PS (for better understanding):
WORKING: Print from my Touch via my laptop on the printer, which is connected to my router.
NOT WORKING: Print directly from my Touch on the printer.
could be a print driver issue
The printer works! But just via the other way i mentioned.
I think its a network issue or just a lack of a program feature
if you're question is about getting a network printer to work
in a different way from a windows pc
rather then getting a network printer to work from your blackstone pda
I should prob move your thread to the offtopic forum
as it would have nothing to do with blackstone pda's at all
and in offtopic forum more people with knowledge about
network printers would be likely to stumple across it
if they don't happen to own blackstone pda's too
Oh i'm sorry, i think we got an misunderstanding. Probably because i'm not a native english speaker.
Here is again what i have/want:
WORKING: Print from my Touch via my laptop on the printer, which is connected to my router.
NOT WORKING: Print directly from my Touch on the printer.
Hope i made my request more clear
Isn't there any possible solution?
Or couldn't I make my request clear enough?
I don't know if anybody has the same configuration at home, but it is like this:
The router provides the printer as a local printer, just over an TCP/IP-Port. So in Windows you connect it over "local printer" and "specific port --> TCP/IP"
But I think that isn't possible with our Westtek Software, is it?
may be the (jetcet?) software in HD doesn't support printing over ppc networking.
I've an HTC Desire HD and can connect via wifi, I could connect via cable and tether a PC via the phones 3G signal etc However, I was wondering if, in the absence of USB connectivity and no wifi or 3G, would a USB to RJ45 cable be made to work? That is, having a wired ethernet connection to the phone's microUSB port. Obviously you would need an ethernet driver on the phone.
Now I don't have an immediate need for this, it's more a case of 'I wonder ...... '. I've read that USB host mode is not possible but not sure how/if that would negate being able to driver ethernet over the microUSB port. Anyone know for sure?
Ta
Dave
dvhttn said:
I've an HTC Desire HD and can connect via wifi, I could connect via cable and tether a PC via the phones 3G signal etc However, I was wondering if, in the absence of USB connectivity and no wifi or 3G, would a USB to RJ45 cable be made to work? That is, having a wired ethernet connection to the phone's microUSB port. Obviously you would need an ethernet driver on the phone.
Now I don't have an immediate need for this, it's more a case of 'I wonder ...... '. I've read that USB host mode is not possible but not sure how/if that would negate being able to driver ethernet over the microUSB port. Anyone know for sure?
Ta
Dave
Click to expand...
Click to collapse
I think the answer is not without usb host, and the cable would need to be more like a dongle with a nic in it.
Sent from my DROID2 using XDA App
mrkite38 said:
I think the answer is not without usb host, and the cable would need to be more like a dongle with a nic in it. ...
Click to expand...
Click to collapse
You're right of course. Doh ..... (on my part). But then you can get things such as this ... http://www.saverstore.com/product/2...NIC-1427-100--USB-to-RJ45-Network-connection- ... (first one I found - may be cr*p ).
Dave
I have seen this work using a Router with a usb port.
It requires a Linux router with enough guts to do it, Tommato/DD-WRT running, and one must fiddle with it. Essentially one uses the router to share the internet USB connection. It is probably the cheapest and most supported route.
LargePrime said:
I have seen this work using a Router with a usb port.
It requires a Linux router with enough guts to do it, Tommato/DD-WRT running, and one must fiddle with it. Essentially one uses the router to share the internet USB connection. It is probably the cheapest and most supported route.
Click to expand...
Click to collapse
That would be lovely though .. Ill try it later ...
Let us know how it goes.
Back in the day I had an HP iPaq that didn't have WiFi built in, but I could connect it to a wired network via a small adapter that functioned as a nic. Hypothetically you could find or fashion such a device to function over mini-USB, and then write some drivers to get it to share data with an attached computer. Just my 2c.
If you want to write drivers, you have a whole new level of complexity.
USB port of a router is a known cheap solution.
I'd have to second the OP's idea, as it does have merit. Hopefully the work on getting the USB Host working can show some results in the future....
However, I'm in the same boat, where I have a Nook Color running CM7 I use as a tablet, and an N1. I'm also on business in China a lot, and I prefer to use the NC in place of a laptop, although in some places wireless is flakey or non-existent. In those scenarios I'd rather not use the N1 as an access point using the 3G network to run data, as it adds up quick, even when using China sim cards.
It's these situations where a means to connect an android device to a physical ethernet is desirable, whether by USB or by wireless to a dongle.
This is the one device I'm testing out now is a CQR-980 from Cnet. You'll have to google it, because I can't post links.
The reason for this unit is it's size (its 3.52 (L) x 2.32 (W) x 1.06 (H) inches), and full support for setting up a secure wireless environment. If it works right, I will pre-configure it as an access point with WPA2, and it should be able to be plugged into any ethernet port in a hotel or otherwise, and I should get an IP on the NC or N1 via wireless.
If anyone else has found a better way to make this sort of setup work, would love to hear of it. The fewer devices I have to bring the better. Yet this is still better than dragging even a small laptop around.
I have seen this work using a Router with a usb port.
The Phone got to have specialized hardware to enable it to use just that USB to RJ-45 cable.
But in my experience, I could be wrong about it. Don't know what the R & D guys will cook up next.
This could make the job of having RJ45 connected to USB?
http://www.cnetusa.com/eng/CQR-981.php
Also this seems interesting:
http://www.euogo.com/usb-lan-adapte...to-rj45-adapter-for-android-tablets_p420.html
Will it work with an ASUS Transformer (Honeycomb 3.0)?
I have looked around a lot on the web for the MicroUSB to RJ45 Ethernet on a Droid, no luck. I have small hardware devices that have embedded configuration servers that are only accessible via TCP/IP Ethernet RJ45 ports and I normally use my netbook for that. I thought it would sure be cool to be able to access those embedded servers via my Droid2G for example, and get rid of the netbook. It seems like the phone can do almost everything else.
I've read about USB host mode etc, and the mini dongles with NIC's in them seem more promising, but I guess there has not been a big enough need for the guru's to go after it. Aparently it may available on the Android 3.x tablets but no able to backport to Android 2.x? Verizon will likely never upgrade my D2G OS.
dvhttn said:
You're right of course. Doh ..... (on my part). But then you can get things such as this ... http://www.saverstore.com/product/2...NIC-1427-100--USB-to-RJ45-Network-connection- ... (first one I found - may be cr*p ).
Dave
Click to expand...
Click to collapse
What if you used this but also used a usb extender so you could plug in the phone cable to the usb to rj45.? Then all that would be left would be the drivers.
With the exception of cybdroid's situation I think that a little wireless ap would work great. I have a little netgear wgr101 that works great.. you connect it to a rj45 port in the motel, and then wifi from the phone or laptop.
The reason i'm on this tipic, is I was thinking rj45 to rj45 on a copier. Then I can set same subnet, and ip range with a crossover cable(or ipx on on the copier). Then I wouldn't have to use a full laptop to troubleshoot...
now i'm not an apple fan but redpark has something for the i- series of apple products to do exactly what i'm curious about... you can check it on the tech journal.
Now that I spend some time reading and thinking, I might even be able to use my little wgr101 if i figure out a hosts file in the android os to direct traffic through the router. And, if I don't have to wear out the usb jack on the device, all the better.
I think I have my problem fixed, just went ahead a posted this as it might give someone else an idea. Might be a solution that even the op enjoys entertaining... I think op#2 and frayedends are on the right track.
Hi there.
I would like to help a friend purchase an A500 tablet. They do not have WiFi but a MiFi. How do they print? This is one of the reasons they want to purchase a tablet. They do not have a PC, or a laptop, and don't want on. They want an A500, a printer and a MiFi. That's all.
How do they print? I presume you can't just stick any USB printer into the USB port and make it work. Any special app to make it work?
Thanks for your help.
This article might help them out. It lists quite a few options for doing exactly what they want... As long as what they want includes buying the appropriate printer...
Or if their printer has a usb port and accepts usb memory it would be easy. Heck they could probably get a printer that reads sd cards and do it that way as well.
I've never tried printing though USB before on the a500 but I wouldn't imagine it would be that easy/if at all possible. If your printer can connect to the mifi then it is possible to do a network print through the a500 but you would need a special app for that.
You have to use aprint service thru a computer get a compatible printer.some of the new HP and brother printer have print apps that will work over the MIDI device.it uses a cloud print service type connection.