Turn Screen off but keep programs and GPS running? - Touch Cruise 2 General

Hi,
When i had my prophet before i could run GPS Tuner (or other GPS Softwares) and turn off the screen (button on top i mean) without having any difficulties. Now with the Iolite i have the problem, that when i turn off the screen the GPS gets turned off as well (as if the thing goes into standby)..
Is there any way just to make it run the software and the GPS no matter if the screen is on or off?

Just go to task manager and add it as exclusive. However it trade off with high battery consumption rate

Or you can use attached registry change. However, I am not sure if it is working as I didn't checked it yet. Maybe you can try it and inform us, if it is working.

Nachtwind said:
Hi,
When i had my prophet before i could run GPS Tuner (or other GPS Softwares) and turn off the screen (button on top i mean) without having any difficulties. Now with the Iolite i have the problem, that when i turn off the screen the GPS gets turned off as well (as if the thing goes into standby)..
Is there any way just to make it run the software and the GPS no matter if the screen is on or off?
Click to expand...
Click to collapse
there are 2 ways which might be helpful to your problem, but i am not quite sure.
1. some nav software will provide such options that will keep screen on or turn on screen whenever instruction is comeing.
2. before you start to use nav software, go /start menu/setup/system/background light/, uncheck device off and check screen off after xx minutes.
just try, good luck!

torrentonly said:
Or you can use attached registry change. However, I am not sure if it is working as I didn't checked it yet. Maybe you can try it and inform us, if it is working.
Click to expand...
Click to collapse
What exactly does this file do? Does it keep the GPS running even if your phone is on StandBy (screen and buttons turned off)?
I'm in search of the same solution. I want to keep my GPS program running, but I want to turn the screen and buttons of, when I put it in my pocket.
Or is there a separate program which can simulate a standby?

Related

Profiles for Wifi/GPS/BT etc ??

Ok,
I was on eXpansys some while back, and read on the HP 6915's page that you could change profiles on the today screen to change wireless protocols.
For example you could setup the following.
Home - Wifi On, BT off, GPS off, GSM on.
Car - Wifi Off, BT on, GPS on, GSM on.
Work power - Wifi on, BT on, GPS off, GSM on.
Work no power - Wifi off, BT off, GPS off, GSM on.
Would make my life a lot easier that's for sure.
Is that something that HP came up with themselves ?? Is it a download somewhere?? Anyone HELP!!
Not a built-in/free solution, but PocketZenPhone is pretty good for this:
www.pocketzenphone.net
Cheap too, EUR$8/USD$10...
Yes that's sort of what I'm after, but I really want something I can setup and just leave on the today screen, with the option for GPS aswell (I don't think that has it).
Phonealarm is what you need. Haven't not tried it on my Trinity but was pretty erractic on my P800W(Artemis).
http://www.pocketmax.net/phoneAlarm.html
Nigel Cone said:
Yes that's sort of what I'm after, but I really want something I can setup and just leave on the today screen, with the option for GPS aswell (I don't think that has it).
Click to expand...
Click to collapse
I don't think you need to worry about GPS, it comes on when you launch a program that needs it and turns itself off when the program closes.
Nigel Cone said:
Yes that's sort of what I'm after, but I really want something I can setup and just leave on the today screen, with the option for GPS aswell (I don't think that has it).
Click to expand...
Click to collapse
PocketZenPhone installs an icon that sits at the bottom of the today screen - either tap on it or or use the scroll wheel/button to change profile. It also has a today plugin, but it takes up a lot of real-estate... You can also use Voice Command to change profile by fiddling with the shortcuts.
You are right about GPS - it doesn't handle that, but since the GPS doesn't actually transmit anything there is very little to be gained by switching it off - not even sure if the various GPS ROMs for Trinity have this option.

On diamond shut dounw gps with screan off

Hello,
I look for a software for the diamond, which allows me to put out(switch off) the screen. And at the same time to leave the GPS in function(office) as with the htc touch with the touch of setting in a stand-by mode.
The diamond cuts the GPS and thus tomtom also.
Thank you
Fab to France
I would also need this function as it will save a lot of battery time while running gps-tracking softwares...
Search for PSShutXP. This gives you the option to turn off the display without going to standby completely. I mapped it to the Long_Power.lnk. Works good. But battery consumption is still verry high while tracking GPS with display switched off.
axelpix said:
Search for PSShutXP. This gives you the option to turn off the display without going to standby completely. I mapped it to the Long_Power.lnk. Works good. But battery consumption is still verry high while tracking GPS with display switched off.
Click to expand...
Click to collapse
Thanks for the tip mate! I'm running mainly Run.GPS without map, so with the screen switched off, I will hopefully get a few more minutes of use at least =)

Turning off screen shuts down GPS

I have a problem with my Touch HD in the way that everytime the screen shuts down the GPS seems to shut down. Regardless if I Push the power button or if I let it shut down by itself.
For example if I'm recording a track it will make a straight line from the point where the screen shuts down to the point where I turn it on.
I'm using Garmin Mobile XT and Kartex (a software from the Swedish lantmäteriet).
Have been using both softwares on my old E-ten Glofiish X800 and it worked fine.
/ Magnus
I think the problem is that its not the screen that turns off, but your device is going into suspend mode.
You will need an application which prevents the suspend mode and turns just the display off.
Is there a way to keep the GPS on in suspend mode?
Is there a way to change the registry so the GPS would not shut down in suspend mode? If not, what application would you recommend to use to only turn of display but not put the device in the suspend mode?
PoGa
poga said:
Is there a way to change the registry so the GPS would not shut down in suspend mode? If not, what application would you recommend to use to only turn of display but not put the device in the suspend mode?
Click to expand...
Click to collapse
Install MobileMagic from here,
http://forum.xda-developers.com/showthread.php?t=449654
On the options tab, choose GPS while power off.
I was just about to suggest the same thing. Mobile Magic allow for GPS to work while in suspended mode. There is even a feature that automatically calls upon what ever GPS app you have to start automatically when GPS signals are detected. Pretty cool not to mention a slue of other features this nifty app has.
Thanks gadgetuk437 and band27! Great app although a little bit too "robust" as I don't need the screen rotation & all other features. I guess I will only start it when I need to use GPS.
PoGa
I am in the same boat using GPS Watch which provides a track which can be outputted to Google Earth
Is there a registry hack that will allow the GPS to continue to be operated when powered off?
Thanks
Thank you gadgetuk437 and band27 for your advice but I don´t seem to get MobileMagic to work.
I have installed it and I have choosen autostart, start hidden and GPS power when power off. Have done nothing else.
MobileMagic autostarts hidden but doesn't prevent the GPS from turning off.
I have been using screenoff but that app doesn't really work either.
I raised the question at HTC as well and got the answer that this is something that is done by design in order to reduce the battery consumption.
I just don't understand why, If I didn't want to waste power I would of course close the GPS app before i turning of the screen.
Yeah, same here. After some testing I realized Mobilemagic's function doesn't really work. Even thought I also have the function to keep the GPS on selected my Garmin Mobile XT still looses the GPS fix as soon as the device goes into standby
PoGa
I'm away to do the same...
I have Garmin Mobile XT with the Snowranger map sets for tracking my snowboarding runs. I also want to leave the phone in my pocket all day and track where I've been!
I tried it a couple of weeks ago with my Diamond whilst running. I had the music player running and Garmin tracking me - and it kept my log file (which I imported to google earth) over my whole 45min run.

All programs close when screen goes black

Hi all.
I have this annoying problem with my Blackstone.
When the screen turns off everything closes down. It's really annoying if i'm using messenger or something and not look on it for 2 min it closes messenger down.
I know i can choose in battery setting not to turn off the unit if it's not used for a while, but i still like that the screen is turned off, but still working.
Can this be done??
Dipper60 said:
Hi all.
I have this annoying problem with my Blackstone.
When the screen turns off everything closes down. It's really annoying if i'm using messenger or something and not look on it for 2 min it closes messenger down.
I know i can choose in battery setting not to turn off the unit if it's not used for a while, but i still like that the screen is turned off, but still working.
Can this be done??
Click to expand...
Click to collapse
Yes it can.
Go to Start/Settings/System/Power/Advanced and you can select the screen or backlight to turn off if device is not used for x mins on either battery or external power
Fallen Spartan said:
Yes it can.
Go to Start/Settings/System/Power/Advanced and you can select the screen or backlight to turn off if device is not used for x mins on either battery or external power
Click to expand...
Click to collapse
Yeah i know, but it only turn the lights down, not turn the screen off. It's only if i choose to turn off the device the screen turns off.
I use gyrator to set up an event that turns the screen off without turning the device off when the stylus is inserted (you can modify the default gyrator behaviour which is to lock the screen when the stylus is inserted). If you want to be fancy you could set it up to turn the screen off if the phone is turned face down, you don't really need the screen on then anyway unless you're in the habit of looking at your phone above your face while lying on your back, or trying to use it while doing acrobatics in an stunt plane.
shuflie said:
I use gyrator to set up an event that turns the screen off without turning the device off when the stylus is inserted (you can modify the default gyrator behaviour which is to lock the screen when the stylus is inserted). If you want to be fancy you could set it up to turn the screen off if the phone is turned face down, you don't really need the screen on then anyway unless you're in the habit of looking at your phone above your face while lying on your back, or trying to use it while doing acrobatics in an stunt plane.
Click to expand...
Click to collapse
Well i can't get it to work :-/
What i'm looking for is also a thing so the device isn't turned off when i push the turn on/turn off button on the top. I want to use this button to turn off the screen and not close down the programs.
This is what i'm looking for and i hope someone can help me
Dipper60 said:
Well i can't get it to work :-/
What i'm looking for is also a thing so the device isn't turned off when i push the turn on/turn off button on the top. I want to use this button to turn off the screen and not close down the programs.
This is what i'm looking for and i hope someone can help me
Click to expand...
Click to collapse
Just tried the screen off when phone is face down and it doesn't seem to be working for me either for some reason. But the stylus in event is working fine, just pop the stylus out and put it back in again and the screen goes completely off without killing the processes in the background (can still explore phone with active sync). I wouldn't want to mess with the power button as that is really useful to provide a proper device suspend when I want it.
I have a similar problem but with the GPS.
I have raised the question here, on some other forums and directly to HTC.
From HTC I got the answer that it is done by design to minimize battery drain and that they would have many angry costumers complaining about low battery life.
The only solution I know of so far is to use a 3rd party app.
I use "screenoff" and everytime I use the GPS I go to advanced-power and uncheck all the boxes.
When I'm done using the GPS I check the boxes again, otherwise I'll have to remember to turn the screen off manually everytime in "normal" usage of the phone.
I think it's sad though on such an expensive device not to have the option to run programs and hardware in sleep mode.
I'd rather find a solution where I can push the power button as usual and where I can have the boxes in advanced-power checked all the time.
I managed to get gyrator to turn the screen off by flipping face down, just needed to put the screen off command before all the rotation disable commands. Now if I want to disable the screen I just have to flip it face down for a second or so.
Thx for all your help.
But i found out that it's not only when the screen turns off everything closes. If i just leave it on home screen for like 2 min. everything also closes down.
I've heard from another forum that it's something HTC has decided to do to keep on the battery....
I don't know if there is anything to do here then??
Go to the start button, select settings, select system , scroll down and select power then the advanced tab and UNTICK Turn off device if not used for 2mins for both external and battery power.
shuflie said:
Go to the start button, select settings, select system , scroll down and select power then the advanced tab and UNTICK Turn off device if not used for 2mins for both external and battery power.
Click to expand...
Click to collapse
Done that... Still closes everything after around 2. min....
Strange, doesn't do that on mine.
shuflie said:
Strange, doesn't do that on mine.
Click to expand...
Click to collapse
I had a similar problem and only thing which resolved it was a hard reset!
I'm just testing it again to make sure. Have a track playing in the HTC music app and I'm signed in to messenger. Screen is off and I'm waiting for 3 mins to make sure.
Fallen Spartan said:
I had a similar problem and only thing which resolved it was a hard reset!
Click to expand...
Click to collapse
That was going to be my next suggestion, really doesn't sound like normal operation to me. So hardreset and install one app at a time until you find out what is messing things up for you. 3 mins are up and track is still playing and I'm still signed in to messenger.
Thanks to a guy called Dawsonas I just found a program called Pocketshield.
It has an application permission feature:
"When this app is running override power off: just do screen off" (use this option for music players, GPS apps, loggers, IM, or any app that needs the device to stay awake). This setting will take effect either when "Power off on lock" or "Power off after 20 seconds" options are enabled.
Check it out
http://pocketshield.netserver01.com/
Magster said:
Thanks to a guy called Dawsonas I just found a program called Pocketshield.
It has an application permission feature:
"When this app is running override power off: just do screen off" (use this option for music players, GPS apps, loggers, IM, or any app that needs the device to stay awake). This setting will take effect either when "Power off on lock" or "Power off after 20 seconds" options are enabled.
Check it out
http://pocketshield.netserver01.com/
Click to expand...
Click to collapse
I will try that
But do you guys think it could be some settings in the ROM? Should i try another one or what do i do when you say it isn't normal for the phone?

Sygic Drive and wm6.5 - screen illumination

Hi all,
When I use my GPS software (Sygic Drive) my pda turns off the backlight of the screen even if the software is designed to avoid it...
Is there any way to solve this? I can disable the backlight countdown option in the settings menu, but if there is another way it could make me very happy
Thanks in advance!
Majes said:
Hi all,
When I use my GPS software (Sygic Drive) my pda turns off the backlight of the screen even if the software is designed to avoid it...
Is there any way to solve this? I can disable the backlight countdown option in the settings menu, but if there is another way it could make me very happy
Thanks in advance!
Click to expand...
Click to collapse
If your gps software can't take over Windows Settings, the only way is like you said. Turning off the option in Power Save. I don't have that problem with iGO8 when on a route. if used as Map only, showing my location, it goes off. I haven't tested Live Search or Pharos with this last build(21202). Unless one of the Registry Guru's might have a registry edit to solve your problem. Good Luck, I know your frustration. I had it with iGO8 till I found the setting to keep light on.

Categories

Resources