Related
hi folks tried to update special rom and upon where the XDa comes up with upgrading takes 5mins the software crashed out telling me to remove from cradle and do soft reset well did all that but cant get active sync to recongnise the XDA and the XDA is still on that upgraing 5 minute screen HELP
If it will not resume when you restart the upgrade program on the PC, then it's time to upgrade via the bootloader method. You need (access to)an SD-card reader/writer for the PC, and to read around on this forum a bit.
thanxs I guess thats the conclusion I came to however just to make sure do u know the steps involved in installing the special rom I have the download exe file someones put on the forum
****. I cooked a second ROM (based on testing the first one - and removing utils I didn't need)
Flashing started - but this time, ActiveSync dropped out and I was left with the 5 minutes screen.
I have tried hard reset but only the "upgrading' screen appears. Now I'm wishing I had never messed with it.
I can get the Wallaby Boot loader screen to come up (GSM OK) it says.
But I have no clue about this other "bootloader" method mentioned on this page. Can anyone please advise where can I find details of the fix? Is the ROM really wiped out and no longer recoverable?
I have the same problem as the first person who posted.
Then you will need to restore the OS using an SD card. (Min 64mb).
Probably easiest to cook a ROM at Jeffs Kitchen to your taste:
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Save it as .nb1 type (bottom of that page).
Then get XDA Tools (yes I know its starting to sound complicated but its not really). http://xda-developers.com/XDAtools/
That program allows you to copy the .nb1 file you cooked to be loaded onto the SD card.
Once you have transferred the OS (.nb1) file to the SD, stick it in your XDA.
Turn on the XDA pressing simultaneously the on switch and sticking the stylus in the SOFT reset hole.
You should get a white screen saying something like flash ROM from SD. Press the JOG (navigator) big switch at the bottom to start the process.
Make sure you have mains power to XDA during this process.
When it finishes, REMOVE the SD card and press HARD reset.
Should be back to normal!
p.s. It goes without saying that you need an SD card reader !!
p.p.s I hope yours is better than mine. Try to get the latest version with drivers that can deal with big SD card sizes...
It does not say hard reset it say cold reboot to reset. So I did a soft reset and it worked after about 7 tries.
I really like what they did with this ROM Kitchen. I would think that if they can get this really stable then they should offer a service to create your own ROM's allowing the user to select what programs they want to include in the ROM.
Er, if you read other areas on this site you will notice that this is run by enthusiasts, who are making their work available to others.
So a little please and thank you will ease your way.
Rather than... "they should" maybe "it would be nice if...."
:idea: If you really want to DIY - then follow all the instructions, get yourself a Unix platform and MKROM.
Bye
ps sorry I got one detail wrong.
pps Sorry I bothered actually
Ariel said:
Er, if you read other areas on this site you will notice that this is run by enthusiasts, who are making their work available to others.
Click to expand...
Click to collapse
Believe me as the owner of www.pocketpcminds.com I understand this. Back in the days of carrying a Palm OS device there a program that allowed you to add and delete things in your ROM.
What I was suggestion is a service that users could pay for that would inlude a list of Pocket PC programs that the users could choose what programs they want loaded in the ROM. From what I have seen of Pocket PC users each person has a list of programs that they find useful and use regularly.
I onlt suggest this because the people running this need to cover thier cost. Otherwise they may use intrest and stop it all together.
We're all too busy with other things to turn the ROMkitchen into a commercial thing. But if anyone else wants to do so, please contact us.
Pro:
- It would be a great sales platform for software (spb gprs monitor, PIMs, etc.)
Con:
- Available space shrinks as OS grows
- No idea how this works out on XDA II yet
Can't burn the Wallaby Patch to the SD
When I try to burn Wallaby Patch to SD the following error appears
Failed to open device \\.\PhysicalDrive8
Anyone help with this.
hi I did all that but when the XDA is being flashed it finishes but comes with achecksum error now I know I am doing everything right as I managed to reload O2 original .nb1 file and my xda is still as was however I want the forums version rom so can unlock many thanx for the previous how 2 instructions
SD card flash - 5 min screen
Ariel said:
Then you will need to restore the OS using an SD card. (Min 64mb).
Probably easiest to cook a ROM at Jeffs Kitchen to your taste:
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Save it as .nb1 type (bottom of that page).
Then get XDA Tools (yes I know its starting to sound complicated but its not really). http://xda-developers.com/XDAtools/
That program allows you to copy the .nb1 file you cooked to be loaded onto the SD card.
Once you have transferred the OS (.nb1) file to the SD, stick it in your XDA.
Turn on the XDA pressing simultaneously the on switch and sticking the stylus in the SOFT reset hole.
You should get a white screen saying something like flash ROM from SD. Press the JOG (navigator) big switch at the bottom to start the process.
Make sure you have mains power to XDA during this process.
When it finishes, REMOVE the SD card and press HARD reset.
Should be back to normal!
Click to expand...
Click to collapse
I have a similar 5 min screen, and I tried as told, that is bought a card reader, cooked ROM, downloaded and transferred the nk.nb1 file to sd card using xda-tools, and entered into bootloader. But all I get is WAIT and then GSM OK message. Not the one that gives me option of flashing the ROM. How exactly to transfer the ROM image to SD card?
Rom Flash Crash
Just in case
I found that getting the XDA going initially by putting across the O2 installer programmeA onto the SD card rebootting with soft reset which installs the standard O2 locked phone system however this allows your XDA to be seen by the PC
all I did then was using the Kitchen Rom is double clicked it then goes into install mode through Programme A and does a PC to phone install.
I found I reinstalled twice and the phone now is working unlocked as required
I tried many times to do the soft reset install as instructed on the forum but it just crashed everytime
I guess the WBL version 5.15 does not identify nk.nb1 file as a rom image. it needs the rom image in raw form, the same as it is copied by bootloader that is WinCE to SD. I think the old XDArit writes it in the required format. dont know how the XDA-Tools does it.
ROM flash crash - solved!
It finally worked. With help from ntabikha, a member of this forum, I got it going. I plugged it in the cradle after hard reset. Activesync kept announcing that it can not connect to the device, and I kept clicking "Retry" (perhaps "disconnect com port" might as well have been all right, but I didn't do it. I thought it might disconnect the com port and stop the Program A from connecting to the device).
I then ran the Original Qtek Upgrade installer, and it did not connect on the first attempt. But it asked me to soft reset the device and run the program again. I did so, and whoa! it worked! It worked great! However, I don't understand why the cooked version 3.17 from Jeff's kitchen was installed instead of Qtek Upgrade Version 3.16.52. I care the least though, since I now have a working xda! Thanks to the guidance from ntabikha.
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.
No problem thanks for your help
dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz
Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.
Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.
It works a treat. Thanks muchly!
Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:
I also managed to 'locate' another copy and it works fine, thanks for all the help.
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?
Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!
sorry ignore that post! Work computer blocked the file out
I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.
Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob
Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.
Tried it. Still get the problem :-(
My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.
Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.
I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
shadows of yesterday said:
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
Click to expand...
Click to collapse
can't help you or tell you the reason because you are not giving enough details about what you are trying to install, what is going wrong. How are you trying to install. Exe or .cab files. are you just getting error's during the installation
i tried to install .cab & .exe , but it says install unsuccessful, for example SPB & Battery status
mmmm
On what ?... is the cab on the phone or on the PC ???????
i tried both , but i couldnt
You have the HTC Touch Elf right? No cabs at all are instaling on your phone.
Possibiliites:
1. The cab files are being currupted either while you are downloading them or while you are sending them to your phone. FYI Cab files are to be installed via your phone not PC. Transfer the complete cab to phone and just click it to install - Do Not Unzip it. (A cab file looks like it is a zip file or a rar file wen it is on your PC but don't be fooled. it is a cab and does not need to be unzipped) you will only see a bunch of messy files and will just get confuzed. just place the cab on your phone and tap it with your stylus to initiate install
Exe's are to be installed via your PC to your phone through activsinc. place the exe on your desktop (Or wherever) and connect your phone to your PC using Activsinc. Then click the exe on your desktop and follow installation instructions - NOte you will have to still do some clicking on your phone to allow the installation.
2. you are not installing them properly and therfore follow instructions above.
3. your phone is currupt somehow (I don't see how) Try a hard reset and see if the programs will install after that. if not, you might want to return your phone for warranty (I am assuming you just got this phone and this is the first time you are trying to install something.
4. Maybe you have run out of room on your device to install any more applications (if you have been installing tons of other stuff successfully)
I have never gotten any errors installing cabs or exe's exept for when I was trying to install something that my phone did not support. (Not a valid WM application) or something like that.
Edit: You still are not give us much information - What type of error are you getting - What does your phone show/tell you?
Does it start to install and fail half way through? does it not start at all? does it install and the programs just do not run?
Tell us what program you are trying to install - what error you are getting and when you are getting it. Tell us the method you have used to install it etc....
If you want help you will have to provide us with as much information and detail as you can. Otherwise - Good Luck.
I will check back here regularly to see your response and try to help, but if you don't give us much more detail - no one will be able to help you.
Did you flashed your ROM recently?
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
shadows of yesterday said:
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
Click to expand...
Click to collapse
I don't know about battery status or wm router but TCPMP is an exe type installation. if you try to install this using your phone by putting the TCPMP installation on your phone and clicking to install, it won't work. You have to put the installation file on your computer, connect your device to your computer through activesinc. then click the TCPMP Installation on your desktop and follow instructions. Make sure you accept installation on your device when your device asks. The others may be the same
i did like that , but nothing changed , same message , install unsuccessful
shadows of yesterday said:
i did like that , but nothing changed , same message , install unsuccessful
Click to expand...
Click to collapse
Are you trying to install to your storage card or to device? Are you certain that you have enough storage space left?
Do you have any problems with Activsinc?
Have you tried downloading another copy of TCPMP - Maybe the copy you have is no good.
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
DuelMasterNG said:
Did you flashed your ROM recently?
Click to expand...
Click to collapse
You never answered the above question.
shadows of yesterday said:
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
Click to expand...
Click to collapse
I don't know if I can help you with this problem. I have never had any problems installing anything onto my device even when the app wasn't compatible. usually still installed, just wouldn't run. I am still using official stock WM 6.0 rom that came on my device. (have not ever flashed a new ROM or Radio and don't know anything about that. If you did flash a new ROM or radio, that could be what is causing your problems and you may want to examine in the thread where you got your ROM or Radio from for answers or to see if anyone else is having the same difficulties. Perhaps PM the person who cooked the ROM. If you havn't flashed any new ROM or Radio, then maybe you changed something in your registry that you shouldn't have with a registry editor (just a thought - don't know if you have ever done this) or maybe you have an app on your phone that is causing conflict when trying to install other apps. You can always try a hard reset of your device (if you don't mind starting from scratch again customizing your device) and then try installing TCPMP and see if it works right after a hard reset. That would suggest either something was changed in your registry or that another app was causing conflict. Bit of a pain in the a## having to reinstall everything(unless you don't have much installed on your device) and still no guarantee that it will work. Before doing a hard reset, you might want to look into backing up your device. (I don't know anyting about backing up - what program to use or how much it can back up such as setting or such but you might want to check it out. Also make sure you sincronize your device with your computer prior to hard reset so that all your contacts, appointments etc... are up to date that way after a hard reset you can just syncronize your device again and get your contacts and appointments etc... back.
If anyone else has any suggestions here -- Please feel free to jump in. I know that I would be really annoyed not being able to install new apps to my device.
Good luck. I hope this gets figured out for you
Rod
i had the same problem, it was unbelievably frustrating, i had to restore my X1i to factory settings, that fixed the problem.
I think you should follow hotrod101's suggestion and do a hard reset. Its quite likely that your phone has malfunctioned or something. It's probably going to save you a lot of work in the long run. Or turn in your device in one of the HTC service centers as already stated. Don't forget to back all your stuff up first.
Good Luck.
thanx alot
you did not say whether your rom is original or coked as i met some problems with cocked roms in installing arabic based applications that was easily installed before flashing me device
Did you get things figured out - If so please share with the rest what you did to solve your problem, in case others are having similar problems. Did one of our suggestions help or did you find another solution?
same problem on my Touch Pro, seams to be common ... some say that it is due to the fixed number (50 installed programs) on the touch flue ... however, I have no more information of how did they got this result, or what is the registry of this issue???
I hope if someone help on this to avoide us the headache cused by hard reset, just thinking about it make me crazy.
even hard reset is not a solution.
First problem i have, whenever i try to use the windows update i get the following message:
Connection to update server was not available. Check our data connection settings and ensure the device date and time are correct.
Click to expand...
Click to collapse
Date & time is correct, mobile connects to websites ok so i dont see why it wont connect?
while googling this, i found theres a ROM upgrade for the phone aswell, do i need it? the phones 6months old and has ROM version 1.56.405.1
The main reason im wanting to use windows update is because i've tried to install a couple of apps and it tells me i need an upgraded .net framework, is there any other way to do this? and how can i find the latest version?
thanks if anyone can help.
dont waste your time...
in short ,dont waste your time with windows update,it is not used ,at all.
windows update (according to interviews on FACEBOOK..windows mobile, with relevant persons from MICROSOFT.....) is only for very crictical updates and they have never used it ,(as far as i know...?)
best is to navigate to htc website ....
http://www.htc.com/mea-en/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
..make sure to select your country ..top right of webpage ,
note, above link i provided... is for htc middle east and africa...and upgrades might not be applicable to your country...!!!!
the .net issue is seperate issue..has got nothing to do with upgrade..!!..
it is used for certain applications to function...
, google for ..something like ...."netcf 3.5 download "....or/
try this link and make sure it is what you are looking for.....!!!!!
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
follow link..it will take you to microsoft web page (dont worry, it is a free applications ) ,but be aware ,the application is about 33 megabytes,and download it to your pc.
afterwards , you have to connect phone to pc and install from pc.to phone..reboot phone and you application should work.?
( do not try and install from phone ,it wont work )
good luck
willcor
From what I can see you already currently have the latest ROM upgrade that is also available via HTC's website, so there is no need for you to download and install it again. At the time, the ROM was released to improve the overall functionality of the phone and fix some existing issues with it.
Here is what the ROM upgrade contained:
Improved Functions and Fixes
1. Updated the Connection Setup Database.
2. Improved emergency call connections while using Airplane Mode.
3. The GPS position updating speed has been enhanced.
4. A Title bar display flicker in TouchFLO 3D has been corrected.
5. Fixed multiple browsing issues.
Go to this link, and download and install the NETCFv35.Messages.EN.wm.cab to your device. After you installed NETCFv35.wm.armv4i.cab, reset your phone.
thanks alot guys, appretiated
Since installing this, im getting quite a few error reports
"A problem has occured with... please tell microsoft about this program"
Reflashing the rom might help.
lemzip said:
Since installing this, im getting quite a few error reports
"A problem has occured with... please tell microsoft about this program"
Click to expand...
Click to collapse
In that case, (if i was in your shoes) i would try to hard reset first then install the .NET cab first and then any other programs you want afterwards. Then hopefully those nasty errors will disappear
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
drehustler said:
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
Click to expand...
Click to collapse
Yeah it sounds like you had CF 3.5 on there before but somehow it didn't stay after the hard reset (which indicates it was installed sometime after the phone was first purchased).
The file you downloaded is to install it from your PC, not the phone. Put the cab file I attached here on your phone, run that, and it should resolve the issue
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
run this from your computer. http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
drehustler said:
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
Click to expand...
Click to collapse
Hmmm no, never heard of it, and basic searching turns up nothing but lists of odd HTTP error codes, that one included. My guess would be an issue with your browser on your PC, but I really couldn't say for sure.
You can also just run the file Rhodium500 linked to above, it's the same .msi file you put on your phone in the first place but couldn't get to run from there...it's an automated installer that just handles everything from your PC instead of you putting the cab on the phone manually.
thanks alot guys, still have no luck and since my phone is under warranty, i'm gonna get a new one. I got 2 htc tilt 2's and only mine is doing this? i'll be back.
dude getting a new touchpro2 wont help... i dont think... like the guy who posted the attachment said, just install it and it should work. if u cant download it use your friend's computer or the library
Dude I had the same problem and if you wait a few mins Ill find it in the microsoft website so you can try downloading from there. Just run it on your computer, then connect your phone with active sync. Go to programs> More> Add/Remove programs and click on the little box there. (I am not sure if the menu goes like this, im actually sure that it doesnt, but for some reason my phone wont connect the WMDM right now so i cant tell u) anyway dont return the phone just because of that cuz the new one might have a problem thats actually harder to fix
I dont remember where I got it from but Ill try to find the original place where I found it.
Heres the file
Microsoft Website
You can download it straight from their website. Its free and it doesnt hurt
thanks, just tried it and had no luck?? i can't even return my phone until the 12th so i'm still trying to figure it out.
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
drehustler said:
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
Click to expand...
Click to collapse
Just a hint; it seems that either resetting the device or ActiveSync seems to solve a lot of problems sometimes. Had the same that my device didn't want to accept new Exchange-settings I made on my PC. After resetting both, it worked flawlessly.