getting an H symbol? - Nexus One General

I'm kind of confused. After flashing cyan's rom, my service keeps switching between 3g and H. This has not happened prior to me flashing the rom though. What is H? Is it a fixable problem?

Could be wrong, but it's probably H for HSDPA

Oooh its actually a bonus for me at least, since before, my Nexus showed 3G whther it was connected to the faster HSDPA or to 3G (Unlike my Hero, which showed H or 3G)
will have to give CM Rom a go once my Nexus arrives back from HTC
Dayz

Cyanogen's ROM enabled the notification if you are on HSPA network. I beleive you will get 3G if your network changes to UMTS (depends on your location). The stock ROM shows 3G even if you are on the HSPA network.

Ohhhh alright. I understand then. It still bugs me though lol

Yes i can verify this is the case, reason why i jumped ship to cynogens rom

heroskyy said:
I'm kind of confused. After flashing cyan's rom, my service keeps switching between 3g and H. This has not happened prior to me flashing the rom though. What is H? Is it a fixable problem?
Click to expand...
Click to collapse
since by default the phone is after the fastest avail option, it tries to get to 3G. if and when you are in the area with uncertain 3G coverage, it could scan and switch to 3G, then to HSDPA (hence - H) or even EDGE (E)
I have this mess on the stock N1 - 3G-H-E changing constantly in some areas.
bad thing is that in such case my data stalls:-( I guess it has nada to do with Cyan's ROM. fwiw

No he must have done something, normally Nexus only shows 3G even if there's HSDPA.
I have HSDPA and here with Stock ROM it only shows 3G, but you can see in the Settings at Status that you've got HSDPA.

Router said:
since by default the phone is after the fastest avail option, it tries to get to 3G. if and when you are in the area with uncertain 3G coverage, it could scan and switch to 3G, then to HSDPA (hence - H) or even EDGE (E)
I have this mess on the stock N1 - 3G-H-E changing constantly in some areas.
bad thing is that in such case my data stalls:-( I guess it has nada to do with Cyan's ROM. fwiw
Click to expand...
Click to collapse
Actually, HSDPA is faster than "3G" (which I'm assuming is actually UMTS), so your phone will use HSDPA whenever it can, then downgrade to 3G if HSDPA isn't available, then EDGE, then GPRS. HSDPA is actually considered "3.5G, 3G+ or turbo 3G" according to its Wikipedia entry.

Paraglider1982 said:
No he must have done something, normally Nexus only shows 3G even if there's HSDPA.
I have HSDPA and here with Stock ROM it only shows 3G, but you can see in the Settings at Status that you've got HSDPA.
Click to expand...
Click to collapse
He did do something. Someone already asked him on Twitter and he answered here.
This reminds me of my times with Windows Mobile where you'd change a registry setting to make the indicator show you had an EDGE connection instead of always showing G (for GPRS)

Quite nice, I was missing this on Nexus

Paraglider1982 said:
No he must have done something, normally Nexus only shows 3G even if there's HSDPA.
I have HSDPA and here with Stock ROM it only shows 3G, but you can see in the Settings at Status that you've got HSDPA.
Click to expand...
Click to collapse
did you even read what I wrote? The stock ROM has the H icon but for some reason its disabled so that only the 3G icon shows up if you have HSPA. Cyanogen simply enabled the H icon to be usable.

I wonder why though, they would disable it...
I cant think of any solid reasons, and if it is in-fact better then "3G", You would think they would want people to know that they have a faster connection present..
but anyways, thanks cyanogen

heroskyy said:
I wonder why though, they would disable it...
I cant think of any solid reasons, and if it is in-fact better then "3G", You would think they would want people to know that they have a faster connection present..
but anyways, thanks cyanogen
Click to expand...
Click to collapse
Given the confusion in this thread alone, which is presumably made up of people who know more about their phones than the general public, I think it's reasonably obvious why it's disabled. The phone companies have spent lots of money and time marketing "3G" to the public - most people will know what you're talking about if you say 3G, almost none of them will know what HSDPA is, and I doubt the cell phone company wants to spend the time to explain that it's actually better than standard 3G to every customer. It's just that much easier to make it say "3G" and be done with it.

ISTR that my Hero and Touch Diamond2 before that, and Touch Cruise before that, all showed a 3G symbol on hsdpa until you were actually downloading something - then it changed to show a H before returning to a 3G when stopped downloading.
I think!

Router said:
I have this mess on the stock N1 - 3G-H-E changing constantly in some areas.
bad thing is that in such case my data stalls:-( I guess it has nada to do with Cyan's ROM. fwiw
Click to expand...
Click to collapse
@ melterx12
My Post was regarding this, it can't be that has H in display with stock ROM

So, this 'H' HSDPA signal display should be a fix in the OTA update?

Is there a possibility that someone answer here and explain how to enable H icon showing?
I think it's in framework-res.apk but don't know where exactly...
I don't want to install a cyanogenmod rom or others to have it. Who have already done it, could share that information with us...this is a forum..

+1
I want to enable the H icon on the stock ROM.
Rooted phone, custom recovery, locked bootloader.
Is this possible?

suffix642 said:
+1
I want to enable the H icon on the stock ROM.
Rooted phone, custom recovery, locked bootloader.
Is this possible?
Click to expand...
Click to collapse
I'm not able to decompile framework-res.apk to source...i've done some tries but with apktool that's not possible...
It is not sufficient open it with winrar or similar because config.xml is in the core....

Related

How do I tell I'm using HSDPA?

Hi, I'm aware that my UK T-mobile Ameo is HSDPA capable and I think I'm in a HSDPA covered area but the homescreen only ever shows a little 3G symbol (or a GSM symbol when I'm not in a 3G covered area).
Is there a way to know whether I'm using HSDPA?
I guess one way would be to do a download speed test - anyone know a convenient way to do one?
tfotherby said:
Is there a way to know whether I'm using HSDPA?
Click to expand...
Click to collapse
If you were using HSDPA, the 3G symbol would change to an H.
However, if you only have the £7.50 web and walk package, and only signed up after the summer, you do not have HSDPA on your account.
The £12.50 and above tarriffs come with HSDPA automatically, but for the £7.50 plan, you need to ask for it and hope that someone likes you enough to add it.
By the way, On T-mobile, you will not see the H all the time. It will only appear when you are transferring data. At all other times you will see the 3G symbol so that you are able to receive calls. If you are transferring data on HSDPA, the T-Mobile Uk network will force you down to 3G while the call is routed to you, and then jump back to HSDPA when the call ends to carry on downloading.
T-Mobile is the only network i have seen that does this properly.
Also, T-Mobile has gone HSDPA on all of their 3G transmitters. If you get 3G coverage, you definitely have HSDPA coverage, but you don't necessarily have permission to connect at HSDPA speeds.
tfotherby said:
Hi, I'm aware that my UK T-mobile Ameo is HSDPA capable and I think I'm in a HSDPA covered area but the homescreen only ever shows a little 3G symbol (or a GSM symbol when I'm not in a 3G covered area).
Is there a way to know whether I'm using HSDPA?
I guess one way would be to do a download speed test - anyone know a convenient way to do one?
Click to expand...
Click to collapse
Agreed, you will see the H symbol instead of the 3G signal - I am on O2 and it works fine (you should also see an E to show an Edge connection where available).
The point about tariffs is one for you to take up with T-Mobile.
Make sure the HSDPA checkbox is checked, in Settings > Connections > HSDPA Switch. When I'm in a 3G area and I start downloading something, the 3G symbol temporarily changes to an H symbol, then changes back to 3G when done.
cottinghamm said:
I am on O2 and it works fine
Click to expand...
Click to collapse
Do you see the H all the time, or only when you are transferring data? I know that on some networks that have an old revision of the HSDPA software, it can cause issues with receiving calls if you are on HSDPA the whole time. Have you had any issues with this?
tfotherby said:
Hi, I'm aware that my UK T-mobile Ameo is HSDPA capable and I think I'm in a HSDPA covered area but the homescreen only ever shows a little 3G symbol (or a GSM symbol when I'm not in a 3G covered area).
Is there a way to know whether I'm using HSDPA?
I guess one way would be to do a download speed test - anyone know a convenient way to do one?
Click to expand...
Click to collapse
Firstly, you will only see an H if your ROM has different icons for 3G and HSDPA. Some do some don't. If the ROM doesn't have that facility, the 3G icon won't change even if you are occasionlly using HSDPA. As far as I am remember, some of the stock T-Mob ROMs do not include this.
You do not AFAIK need to ask T-Mobile for HSDPA. I have never asked them and regularly used it. I am on a £7.50 plan.
There are plenty of speed test sites out there - Google 3G speed test.
Another good site to check speed is "http://performance.toast.net/default.asp?allservers=1&checkid=" I usually check the "Text" box and try a few hosts...TJ
rhedgehog said:
Do you see the H all the time, or only when you are transferring data? I know that on some networks that have an old revision of the HSDPA software, it can cause issues with receiving calls if you are on HSDPA the whole time. Have you had any issues with this?
Click to expand...
Click to collapse
Only when data is transferred, the 3G symbol is there most of the time.
always been seeing the H on mine, right from the original T-Mobile UK ROM. All Windows mobile 6 ROMS from HTC include the different icons, and unless the operators specify to take them out, they should always be there.
the T-Mobile ROMs do include the different icons, as do all the AP ROMs.
Sometimes you DO have to ask T-Mob for HSDPA. They originally turned HSDPA on for the £7.50 contracts by default. They changed this standard policy sometime last year (as i stated in my first post, i think it was in the summer, but i'm not sure) and now not everyone has HSDPA on their contract. If you ever see the H you do...if not, you don't.

So my 3g doesn't work...always switches to HSPDA and then works.

Title says it all. When i have NO HSPDA I become screwed and I have to revert to EDGE otherwise I have no data connection. I haven't tried it out of town yet, but it's ridiculous. It says I'm on 3g, but then switches when I start a speedtest. Is that just because I'm always in HSPDA? Any ideas?
I'm on the Desire ROM. I don't think it's the rom though, because this happened on Cyanogen.
HSDPA is only on when necessary, when it isn't, your on 3G. You're in an HSDPA area, so when you use data your carrier bumps you up to HSDPA.
mudrock1000 said:
Title says it all. When i have NO HSPDA I become screwed and I have to revert to EDGE otherwise I have no data connection. I haven't tried it out of town yet, but it's ridiculous. It says I'm on 3g, but then switches when I start a speedtest. Is that just because I'm always in HSPDA? Any ideas?
I'm on the Desire ROM. I don't think it's the rom though, because this happened on Cyanogen.
Click to expand...
Click to collapse
Assuming you're in the U.S. and on T-Mobile, this thread covers your issue:
3G --> H Data problems
Cheers,
Kermee
Ahh much thanks. So in theory if I leave the HSPDA area my 3g will work because it isn't trying to switch?
mudrock1000 said:
Ahh much thanks. So in theory if I leave the HSPDA area my 3g will work because it isn't trying to switch?
Click to expand...
Click to collapse
If you leave an HSPDA area and only UMTS (3G) & EDGE are available, then in theory, yes. The data will transfer over 3G or EDGE. It's normal for the N1 to "idle" with the "3G" icon, but when you're actually doing data transfer, it'll switch to "H" if it's available.
In other words... nothing is broken. =)
Most people are confused by the "H" because on the *Stock* ROM, the "3G" icon doesn't differentiate between "UMTS/3G" and "HSPDA"... It'll always display 3G with either technology. The *Custom* ROM's differentiate which technology the handset is talking with the tower in regards to HSPDA and UMTS.
Cheers,
Kermee

Saw the "H" symbol on Android.

I live in Bryan TX, about 75miles from Houston and as far as i know there is no HSDPA in my city yet. But i was just trying the Android build last night and it showed the H symbol for a bit. After that i never saw the H symbol, not in winMo, not in android. So was it just android reporting wrong information or was t-mobile actually testing HSDPA equipment at that time(highly unlikely but i wish they were).
Did anyone else experience android showing H even if you were not in HSDPA location?
bizmark03 said:
I live in Bryan TX, about 75miles from Houston and as far as i know there is no HSDPA in my city yet. But i was just trying the Android build last night and it showed the H symbol for a bit. After that i never saw the H symbol, not in winMo, not in android. So was it just android reporting wrong information or was t-mobile actually testing HSDPA equipment at that time(highly unlikely but i wish they were).
Did anyone else experience android showing H even if you were not in HSDPA location?
Click to expand...
Click to collapse
Your proximity to A&M can cause all sorts of unexplained weirdness
lol seriously though, I understand that not only does Houston itself have HSPA+ now (it was in the first wave, Austin gets it next week), but also a large part of the surrounding area (mostly in your direction, and out towards the gulf too) are getting regular HSDPA very soon.
Note that on a stock winmo ROM you won't see an "H" in your taskbar, even if you have that type of connection...it won't display unless you're using a custom icon set (the default one is suppressed by the carrier)
sirphunkee said:
Your proximity to A&M can cause all sorts of unexplained weirdness
lol seriously though, I understand that not only does Houston itself have HSPA+ now (it was in the first wave, Austin gets it next week), but also a large part of the surrounding area (mostly in your direction, and out towards the gulf too) are getting regular HSDPA very soon.
Note that on a stock winmo ROM you won't see an "H" in your taskbar, even if you have that type of connection...it won't display unless you're using a custom icon set (the default one is suppressed by the carrier)
Click to expand...
Click to collapse
Well....i see your location and i'm not surprised by your answer...and i do study at A&M.....but anyways...thanks for the response, will try installing a set of custom icons and try it out......but considering the speeds i get i dont think its HSDPA+....they dont even touch 1mbps.
bizmark03 said:
Well....i see your location and i'm not surprised by your answer...and i do study at A&M.....but anyways...thanks for the response, will try installing a set of custom icons and try it out......but considering the speeds i get i dont think its HSDPA+....they dont even touch 1mbps.
Click to expand...
Click to collapse
Yeah I'm sure it's not HSDPA+ all the way up to you yet, I think they're just getting the 3G to regular HSDPA standards in the surrounding areas like yours.
Also note that even if you see an "H" in the display there, it only really means that you have a better connection with the tower, the backend elements to give you the real speed increase may or may not be in place TO that tower yet.
(to be honest with you, I couldn't really care less about the UT/A&M rivalry...I'm not from here. I just know I might get run out of town if I missed an opportunity to fire a shot like that lol)
bizmark03 said:
I live in Bryan TX, about 75miles from Houston and as far as i know there is no HSDPA in my city yet. But i was just trying the Android build last night and it showed the H symbol for a bit. After that i never saw the H symbol, not in winMo, not in android. So was it just android reporting wrong information or was t-mobile actually testing HSDPA equipment at that time(highly unlikely but i wish they were).
Did anyone else experience android showing H even if you were not in HSDPA location?
Click to expand...
Click to collapse
Depeding on the Developer of the rom. Sometime they use the "H" just to show there is active data.
For example im in Madison TN and we have 3G but dont have H yet. On my phone though, using the Energy Series rom, my phone idles with a 3G but if I load a web page or trigger some kind of data activity, the 3G will turn to H and back to 3G when the data activity is done. Same with some Android Roms, they change to H for data activity and back to 3G when the phone is idle.
I mite not be 100% accurate on that but I think thats how it works on the custom roms.
On a stock rom instead of 3G idle youll see H all day if you had hsdpa in your area.
hypersonicx said:
Depeding on the Developer of the rom. Sometime they use the "H" just to show there is active data.
For example im in Madison TN and we have 3G but dont have H yet. On my phone though, using the Energy Series rom, my phone idles with a 3G but if I load a web page or trigger some kind of data activity, the 3G will turn to H and back to 3G when the data activity is done. Same with some Android Roms, they change to H for data activity and back to 3G when the phone is idle.
I mite not be 100% accurate on that but I think thats how it works on the custom roms.
On a stock rom instead of 3G idle youll see H all day if you had hsdpa in your area.
Click to expand...
Click to collapse
thanks for the response, I guess you might be right there, but I'm not sure stock ROMs show the H icon, because i was in Houston last week, in the middle of downtown and my phone still showed 3G.
Staying on a similar subject can someone help me out with adding the H icon to the stock ROM, I do not want to add a custom taskbar, just looking for some reg edit, where it will show a simple H icon instead of the 3G icon when i'm in HSPA+ coverage.

HSPA is not working on Virtuous 1.0.0

Hi All,
I'm getting a very weird and annoying issue regarding HSPA on Virtuous ROMs.
I found that H is not working properly in the same place where it got to work on Stock ROMs.
I'VE READ ABOUT THE FAQ ON THE ISSUE:
Q: I used to see HSPA+ (H) connectivity with the stock ROM, where Virtuous shows me 3G in the same area. Why is the data slower?
The stock T-Mobile ROM lies about data rate and displays H even if you are in a 3G-only territory. Virtuous displays H only when you actually have HSPA+ service.
HOWEVER, I DON'T THINK THIS IS AN ANSWER FOR ME. IT IS VERY WEIRD THAT HSPA NETWORK (shown as "3G+" in virtuous 1.0.0) IS TRIGGERED EVERY TIME I MAKE A PHONE CALL. However, I'm not able to start H by opening a browser, etc which triggers a data transfer.
Therefore, it should not be a network problem. Also, when I switch back to stock ROM, the HSPA is working properly.
May I ask for your kind help? Thank you in advance!
P.S. I'm using:
HBOOT: ENG S-OFF 0.84.2000
Radio: 26.06.02.27_M
ROM: Virtuous 1.0.0 with htc kernel (also tried using Std and Adv kernels but problem still exists)
i think that the 3g+ is H
cause i get H speeds when it is 3g+
Yea same problem
When I switched to Virtuous even 0.9.5, I no longer have HSDPA speeds nor HSPA+.
P.S. im running 1.0 right now
anyone plz?
No problems here - I get the 3G+ everywhere I used to get H.
Also, you mention that HSPA is working correctly when you switch back to a stock ROM - that's probably not true. The stock ROMs show an H whenever you have *any* 3G coverage (whereas pretty much all of the custom ROMs differentiate between '3G' and '3G+/H'). So when you see an 'H' on the stock ROM, you have no way of knowing whether it is 3G (like you're seeing on the custom ROMs) or if it is, indeed, HSPA+.
Menu - settings - about phone - network
HSDPA
It is working.
Pretty sure he's using new icons, in the latest roms. There's no issue, its just using a different icon to show the same thing.
It's just the icon, they really don't differentiate between the speeds.
Yea the rom is based on orange and they use 3g+ and t-mobile uses HSPA... well speed should still be the same
Sent from my HTC Vision using XDA App
To clarify, I do know about the 3g+ icon issue.
My problem is that I can only get UMTS after switch to new ROM. No 3g+ no matter how much data I transfer.
The most weird thing is that 3g+ is triggered only when im making a phone call.
Im sure its not a carrier cheating issue because i was able to get hsdpa in *#*#4636#*#* mode. After switching to virtuous i only get umts.
Thanks all who was keen to help and reply!
IntegraR said:
To clarify, I do know about the 3g+ icon issue.
My problem is that I can only get UMTS after switch to new ROM. No 3g+ no matter how much data I transfer.
The most weird thing is that 3g+ is triggered only when im making a phone call.
Im sure its not a carrier cheating issue because i was able to get hsdpa in *#*#4636#*#* mode. After switching to virtuous i only get umts.
Thanks all who was keen to help and reply!
Click to expand...
Click to collapse
I am having the same issue you are...
Im stuck on UMTS HSDPA nor HSPA will load... I did a nandroid restore and now it wont get off UMTS
EDIT: I am running 1.0.1
EDIT AGAIN: Updated to Latest Radio and everything is back Online!

[Q] how to get 3G connection?

hi freaks.
used the freaking serach option, but didn´t find anything on this.
a friend of mine from the states gifted me his mytouch 4g. i´ve got it running nicely on wifi, but don´t get any 3g connection.
is this problem known?
i´m on th eplus network here in germany, my apn settings are correct. when i am at a spot, where i get 3g with my old samsung,
and put the sim in the glacier, i only get it showing H. G in bad locations, but never more then H.
is this problem known? here in germany, we don´t have 4g yet, so i would be really glad, to get 3G working.
any tips for a noob?
also, sidenote: when i´m on H, and viewing a website, it gives me a "stripped" look without pictures etc. is this some kind of "downsizing" and known problem?
When you get that "H", think of it as "3.5G" ...it's faster than the 3G network, but slower then 4G. It means your on T-Mo's HSPA+ network.
You can also "force" 3G... download "Any Cut" from the market, open it and make a shortcut using Activity. Select Phone Info, then select "WCDMA Only". If you don't want to download it, use the dialer and put in "*#*#3646#*#*" (I think that's it...) and it will do the same thing.
Your MT4G works fine. "H" is HSDPA or HSPA+, which is as said "3.5G" and is exactly what this phone supports.
It doesn't show you "4G" (which is only a marketing gimmick by itself - HSPA+ isn't a true 4G anyway), because it has no way to separate HSDPA and HSPA+.
great. thanks for the quick anwser.
i found a list for the speedsymbols, might be of interest for other noobs.
H = HSDPA je nach Netzbetreiber und Standort max. 1,8 oder 3,6 oder 7,2 Mbit/s
3G = UMTS max. 384 kbit/s
E = EDGE max. 220 kbit/s
G = GPRS max. 56 kbit/s
i was already asuming the glacier can´t handle 3G, only 4G..
the thing is, on my samsung galaxy it shows 3G and same sim in glacier shows H, wich ment, that the glacier had "stronger" signal. might bee. does the glacier have no 3G symbol at all?
why i was wondering, does anyone recognize this "downsized" internetbrowsing? i´m using dolphin browser, and evrything looks like an early tex only wepage.
unfortunately, i´m right now in a rural area, where i don´t have H or 3G, but will do speedtests tomorrow on both phones to compare.
under settings-wirelesss n networks - mobile networks.
i got that "wmcda" or gsm or both (auto) also, was already wondering, what that might be, so i´m gonna try that also 2moro.
-edit: found the fix for "downsized" browsing, google was forcing me to mobile view of wikipedia etc. never had that on my other phone..
Glacier has 3G symbol, but if you have the "mobile network constantly connected" option set to "On" and your cellular carrier supports it - it can stay on "H" constantly. Many stock ROMs don't show "H" at all, and only show "3G", to avoid just the type of reaction that started this thread So check if the Galaxy (S?) shows "H" at all, it probably doesn't.
Dolphin might have the option to show Mobile view and an option to skip downloading pics. Check that both options, if exist, are "Off".
i assume, u mean "enable always-on mobile data" it was checked, will test it unchecked 2moro and then see, if it shows 3G, as i neverever saw it...
i still got the customrom, but already lurking around the different custom ones threads
if i don´t get t-mobile tv running (just started a new thread for that), i see no need for tmobile rom...
yes, my galaxy (3) shows H, but mostly (only as i know now) 3G in the citycenters, and the mt4g in the same location shows H... really got to speedtest that stuff...
found-the dolphin fix already, as posted, google and wikipedia forced me to mobile view.. now, a day later, (and sober), i see the switch to normal view link all the way down
handyheld said:
i assume, u mean "enable always-on mobile data" it was checked, will test it unchecked 2moro and then see, if it shows 3G, as i neverever saw it...
i still got the customrom, but already lurking around the different custom ones threads
if i don´t get t-mobile tv running (just started a new thread for that), i see no need for tmobile rom...
yes, my galaxy (3) shows H, but mostly (only as i know now) 3G in the citycenters, and the mt4g in the same location shows H... really got to speedtest that stuff...
found-the dolphin fix already, as posted, google and wikipedia forced me to mobile view.. now, a day later, (and sober), i see the switch to normal view link all the way down
Click to expand...
Click to collapse
Roms contain the 3G, H, 4G, evdo/cdma, 2g, edge, icons....But you'll only see 3G when connected to UMTS, and H shows for HSPA+. Depending on signal strength you'll see a different icon in status bar. The major US carriers that use GSM consider HSPA+ 4G, this is false but they've made it as a fact....
"The ITU announced in December 2010 that WiMax, LTE, and HSPA+ are 4G technologies."
in germany we call that "Mogelpackung"
edit. just updated to gingerbread, and now got a 2G logo, where before there was only the G ????
never saw or heard of that in germany, as quoted above, we have only 4 speeds..
this is getting more excited. perhaps tomorrow i might even see 3G
handyheld said:
in germany we call that "Mogelpackung"
edit. just updated to gingerbread, and now got a 2G logo, where before there was only the G ????
never saw or heard of that in germany, as quoted above, we have only 4 speeds..
this is getting more excited. perhaps tomorrow i might even see 3G
Click to expand...
Click to collapse
2G=Edge, I'm sure Germany has Edge data now, and G=GPRS or 1G.
obviously this phone isn't made for germany.. after the gingerbread update, it eather shows 2G or 4G, where we even't have 4G in germany.. speedtest shows 1294kb thats not much, but more then I expected... thx god. I know now, that 3g is working, wether it shows it or not..
in the speedtest details, it shows H, where the fon showed a 4G. so guys, be warned, when travelling.abroad, nothing is what it seems..
tmobile, the former state company deutsche post got still ” beamtenprobleme”
handyheld said:
in the speedtest details, it shows H, where the fon showed a 4G. so guys, be warned, when travelling.abroad, nothing is what it seems..
tmobile, the former state company deutsche post got still ” beamtenprobleme”
Click to expand...
Click to collapse
http://www.telekom.com/dtag/cms/content/dt/en/6908
If the company has HSPA+ in the US, does it not have it in europe?
How international roaming works, and why your device matters
Four frequencies (850/900/1800/1900 MHz) are used for wireless services worldwide. 3G frequencies include: 2100 3G; 1700/2100 3G.
Each phone has a radio transmitter-receiver that works on one frequency (single-band) or on more than one frequency (multi-band).
Since frequencies vary from carrier to carrier and country to country, you’ll need a device for international roaming that works on the frequency where you're traveling. If you have a “quad-band” device, it will work virtually anywhere there’s a wireless signal.
nope, no hpspa+ in germany, and I don`t think it`ll come.
they are just in the beginning of setting up LTE here.

Categories

Resources