I looked for this topic here, but I couldn´t find.
There is a tuturial for installing the Windows Mobile 6.5 on Jade HTC Clones?
I have seen over the internet some screenshots of Windows Mobile 6.5 very close from Zune "desktop", but in the chineses site´s, the "desktop" from those called as Windows Mobile 6.5 is the same of the 6.1.
The 6.5 is really close to the Zune? Anyone has one like this?
Just to check here www!gizmodo!com.br#sites#all#files#tutwinmo1.jpg
Change 1 to #, ! to .
I´m a new user with the http block issue until the admin verify...
Thanks for all!!!
i think this may help...
WM6.5 ROM 72.0MB WM6.1 ROM 59.6MB
The ROM is in the attachment. Please download and copy to your memory (only one ROM in memory) and put the memory in the phone.
At last, press three buttons at the same time:
1) The green button (calling out, it is at the left in the bottom of the phone)
2)The round button (it is in the middle of the green button and red button )
3)The power button (it is on the top of the phone. This button can turn on and off of the phone)
OR
1)The call in/ out button(left button)
2)The end call button(right button)
3)The power button (it is on the top of the phone. This button can turn on and off of the phone)
Please remember: you must press three buttons at the same time.
Files:
- SMART.UPR (71.98 MB) <-----WM6.5
- SMART.UPR (59.56 MB) <-----wm6.1
contact me via private message for the file link
HI... I see that you have a jade clone and you are an exprience user of this forum.
Im from Brazil anda i buy a jade clne with wm6.
I like it but i wat to try upgrade to wm6.5
Its possible?
I search in many foruns but nobody says directly how to do or if its possible.
Can you help me? Its possible upgarde my jade clone to wm6.5?
Sory my english...
Thanks
Tiago
Related
Hi all! was hoping someone can advise me what to do...
My device is ESCORT PCT206, which is a turkish version of Wallaby (PW10A1, ROM version 3.14.13ENG, bootloader 3.15).
So, I tried upgrading via SD card and couldn`t get it to work. When I start bootloader I can see that message to press action if I want to download, but when I do I get only regular first screen from where you get those various tests etc.
Then I tried upgrading with XDA Tools and also directly with .exe files (some downloaded from xda-developers ftp, some cooked on romkitchen) and whichever option I try - it simply doesn`t work - pocket pc resets millisecond after the upgrading line shows on the screen and active sync on my PC dies (then when I start it again it won`t sync with pocket pc before restarting windows).
Anyone had similar problems? Or simply knows another way of upgrading to wm2003se or wm2003?
Thanks in advance!
PeckoPivo said:
So, I tried upgrading via SD card and couldn`t get it to work. When I start bootloader I can see that message to press action if I want to download, but when I do I get only regular first screen from where you get those various tests etc.
Click to expand...
Click to collapse
Are you sure that you have pressed the action button of the device? As much as i know, if you press any oder button you will enter the bootloader as normal....
Stefan
Hi Stefan,
thanks for your reply.
Well, I guess I have - if action button is the central joystick button. If not, then please tell me which one is it...
Thanks!
Hello
PPC: Blue Angel T-Mobile GER
Rom: Xplode Wm6.00.00.WWE
Radio:1.15.00
Protocol: 1337.45
From this rom i want to upgrade to Wm6.1 from Xplode.
My Upgrade steps:
1. Bootloader
2.The ppc shows "Serial"/"Usb" and "v2.05"
2.2 Kill Active sync
3. starting MaUpgradeUt_noID
4.MaUpgradeUt_noID gives no informations about the current Rom /upgrade rom
5.Next
6. Error 150
What i have to do?
Plx help me
Sry for my bad english!
Thx to all
It must be an OS problem
Try using Windows XP rather than using Vista.
I got the same problem with my XDA IIs,
I tried it in Windows XP and successfully Updated to WM 6.1
i have Windows XP no Vista
Give it a try without killing ActiveSync on PC.
1. Put device in bootloader mode
2. Put device in the cradle
3. Start update program (wait till 100% and do not remove device out the cradle)
4. When update has finished, hard reset the device
- If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
Quickly press "Record" & "Camera" before the versions appear at bottom right
OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
- If you have a PH20B1 device such as SX66:
Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.(“Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES)
- If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
- If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting.
- Press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly ...
(if removed earlier) Put back your SD Card before you do the setup. This way the installation from the SD will continue after you have done the setup
5. Your upgraded ROM is now running!
Greets Rossi
Hello everybody
I have a HTC Shift on which Win XP was recently installed . The problem is that it doesn't see the Snapvue part - I can't open it and can't acccess the Comm manager either. In Snapvue I just get a white screen, with the HTC logo - and the comm manager button (upper right) doesn't do anything when pressed.
The guy who installed the Win XP said something about using Active sync to enable communication between the 2 processors (?!) - The device has Active Sync installed, but it just tells me it can't synchronize.
I am a girl, as you probably noticed, and know very little about computers and stuff....Could someone save me? I ned a step-by-step guide for solving this problem, but written for DUMMIES (such as me
I also understand I could reset the device to the original Vista - but have no idea how to do it?!
Please help - I've been looking at my Shift for 3 whole days, and am getting al depressed..
Thanks in advance!
hotdevotchka said:
Hello everybody
I have a HTC Shift on which Win XP was recently installed . The problem is that it doesn't see the Snapvue part - I can't open it and can't acccess the Comm manager either. In Snapvue I just get a white screen, with the HTC logo - and the comm manager button (upper right) doesn't do anything when pressed.
The guy who installed the Win XP said something about using Active sync to enable communication between the 2 processors (?!) - The device has Active Sync installed, but it just tells me it can't synchronize.
I am a girl, as you probably noticed, and know very little about computers and stuff....Could someone save me? I ned a step-by-step guide for solving this problem, but written for DUMMIES (such as me
I also understand I could reset the device to the original Vista - but have no idea how to do it?!
Please help - I've been looking at my Shift for 3 whole days, and am getting al depressed..
Thanks in advance!
Click to expand...
Click to collapse
Did you turn off the device completely? I would remove it from the power, remove the battery, and give a 10 to 20 secs and put battery back and boot it.
Let me know if you have issues.
To restore it to Vista, if the recovery partition is not swiped, just press Fn+3 at the boot time and once it goes into recovery, and just follow the steps.
didn't work....
I tried removing the battery, nothing happened
When I press Fn + 3, it just goes on and starts Windows XP normally (the xp "half" works allright - it's the comm and snapvue which are dead )
Any other idea? Is there any hope ?
oww, now it's really nasty!
I insisted on pressing the FN+3 , and after one or two questions (if I wanted to continue etc) it said "invalid data on recovery partition" - and now the screen just shows black and there's no winxp anymore - I suppose I should write some commands, as there's a white line blinking....but I don't know how to do it.....Heeeelp!
If XP has been installed in place of Vista, then the recovery partition has been wiped, so FN + 3 will not work for recovering Vista.
The Vista (or XP) side and the snapvue side are two totally different entities, so you can wipe the hard drive and snapvue will still work, as it lives in ROM.
So you have 2 separate problems, you need to re-install an OS, and you need to find out why snapvue is not booting.
I managed to enter the bios ( pressed DEL) and it says that hard drive Toshiba etc is "disabled" - so no wonder it can't boot...
Could I do something to enable it or whatever?
Or should I give up ?
Hi,
Who installed XP for you?
Since you need to now 1 or 2 things about computers to do so, I think that person is the one who can help you and do it the quickest....
Other wise you need to post a message after every step and then wait for one of us to respond.... that would take days if not weeks....
Given your name, I guess you don't live near Enschede, the netherlands do you?
Otherwise You could come by and I could give it a go....
greetz,
Pfeffa-rah
no, I live in France at the moment! But thanks for the offer anyway!
I guess I'll just take the thing to a repair shop or something
As for my name, it's "Clockwork Orange" inspired - I'm a great fan of the movie, although I'm French.
No comments regarding the guy who installed the XP! We must keep this discussion civilised!
Thanks a lot , everybody!
Windows Mobile 6.1 WWE by Ham3r
final version!
Windows Mobile 6.1 (build: 21042.1.6.1)
OS: WM6.1 WWE
Free RAM after SR: ~105 MB.
Screen's:
Software:
- ArcSoft MMS 5,
- 1-Calc,
- Jbed,
- FileExplorerEx,
- full Office (without ppt),
- Network Wizard,
- Comm Manager
- SIM Manager from Iolite.
After flash:
After flash, please make HR. After align screen, run ExtROM, please make SR!
Download:
- 4shared
Please don't make mirrors!
hi
good work,nice to see a new developer here,for me i prefere wm 6.5, thnx and good work.
Plain???
Is this so vanilla isnt it?
Yes as homan say, welcome a new developer on Blueangel...
Keep it up!
+ Que PPC said:
Is this so vanilla isnt it?
Yes as homan say, welcome a new developer on Blueangel...
Keep it up!
Click to expand...
Click to collapse
Yes, is it Vanilla, but with useful, standard apps (Java, MMS, Calc). i cooking new WWE ROM, no vanilla, but Vanilla Creamy (more software)
hi, i am new flashig my SPV M2000, Could you tell me how to fix my phone???, I ran your software(hamer 10) and i turned it off(yes, i know!!!), now i only get "serial/usb v2.06", and when i push on/off, record and reset buttoms nothing happen. Could you help me???
sorry, i don't understand.. maybe reflash rom?
flash it in windows xp
Thank you very much!!
at last, ham3r, at last you decided to share your product here.
good idea.
guys, he is good rommaker(he made great roms for wizard, too).
downloaded this rom, today will test it on ba
managed to restore my bricked BA, had to use vista32 bit, the given drivers for BA and this rom by ham3r.
Mm, current I'm using a manila2D on it, works well.
Btw, any ideas on how to make the start menu of the WM6.1 change it colors? I prefer black, matching with the manila2D darkness.
Noted and thanks!
What does this mean ?
Sorry for the display of my ignorance, but I do not know what the following means -
>After flash:
>After flash, please make HR. After align screen, >run ExtROM, please make SR!
What do I have to do, please. I know about aligning sreen, but "make HR" and "run ExtROM, please make SR !" does not mean anything to me.
Thank you for your help
HR = Hard Reset (Push Camera Button + Voice Record and Resetbutton. Change the values KILT = NO, the rest yes. Change the values with die Voicerecord and Camerabutton. When finish Press the Mailbutton
ExtRom= Mostly runs automati when this folder is on your storage card, there are some extra programs for windows.
SR = Softreset (Press the reset Button with the Stylus)
Problem with HTC Touch mobile signals
Hello,
I have HTC Touch here are the details of my model. I am facing problem with mobile signal. Give me some solution for this.
lVersion ROM
Version 3.07.720.03 WWE
ROM Date 10/25/2008
Radio Version 03.34.90
Protocol Version 4.1.13.71
Hardware CPU OMAP850
Speed 201 MGz
RAM size 128 MB
Flash Size 256 MB
Data Bus 16 bits
Storage size 110.30 Mb
Display 240X320
Colors 65536
Bluethooth Version 2.0
Bluethooth Address 00:17:E896:89:7B
Identity Model No: ELF0100
Thanks,
Purushoth
hi,this thread for HTC Blue Angel only.
how do i bypass the country code error?
every wm 5 & 6 rom i tried still gives me the error...
please help me fix it!
Why don't you applied patch for certs?
Thanks for the posting and files...
HTC BA - PH20B1 (Siemens SX66 for cingular USA)
Please help...
I was able to update to 6.1 but stuck at the end
1. Did not get the screen alighnment option.
2. Screen alignment is missing, not able to click properly
3. Not able to see the programs
3. WIFI is not working
4. Sync is not working
5. Not able to run EXTROM
I appreciate your prompt response.
Thanks!
Ham3r said:
Windows Mobile 6.1 WWE by Ham3r
final version!
Windows Mobile 6.1 (build: 21042.1.6.1)
OS: WM6.1 WWE
Free RAM after SR: ~105 MB.
Screen's:
Software:
- ArcSoft MMS 5,
- 1-Calc,
- Jbed,
- FileExplorerEx,
- full Office (without ppt),
- Network Wizard,
- Comm Manager
- SIM Manager from Iolite.
After flash:
After flash, please make HR. After align screen, run ExtROM, please make SR!
Download:
- 4shared
Please don't make mirrors!
Click to expand...
Click to collapse
always make hardreset after flashing
press camera+record+reset during some seconds
in the open menu keep 1st line at no and select yes for 2nd and 3th lines
record change line and camera change yes/no
after that click mail button
if your mail button don't work (broken or something) use multi-port tty 1.42
search more info at forum
hi
my name is shekhar
please get me wm 6.5 to my htc diamond
i want to upgrade from wm6.1 to wm 6.5
please
How to Install or Update your Windows Mobile?
Please Follow Below Orders :
Please Follow Below Orders :
1. you need a PC
2-1. If you have Windows XP -> Setup ActiveSync 4.5 from Here
2-2. If you have Windows Vista or 7 -> Setup Windows Mobile Device Center from Here
3.If you use manufactured ROM(Orginal WM6.1 ROM OR Official ROM) -> Install Touch_Diamond_-HardSPL_OILNEX From Here
How To Install HardSPL on Touch Diamond?
-> After Downloading and Extracting this file
you Must connect your Touch Diamond to your PC with its Cable
Let your PC Connect to your PPC with ActiveSync or Windows Mobile Device Center
Find HardSPL Folder and Run ROMUpdateUtility.exe
At Appeared Windows Page By ROMUpdateUtility.exe Accept Check Box and Click Next Button
Warning : Don't Unplug in Touch Diamond's Cable , Diamond's Battery Must be Charged More than 50%
Then you can see this Message on your PC->"verify the information on your PDAphone...Please wait"
After That you can see Setup Page on your PPC with 4 colors and on the White Color Part ,you can see USB (Notice : You can See Setup Page with Holding Sound Decreasing Button and Pressing Restart Button togather and Release Sound Decreasing Button Until Appearing That Screen)
Clicking Update Button And Next Button After That
And in Finally you can See Two Process Bars are Processing in the Same Time One of them on your PC and Another on your PPC and Restart your Device automatically.
I congratulate, your Touch Diamond Has Been Unlocked now you can install any ROMS That you Want
4. Downloading WINDOW MOBILE 6.5 WITH HTC SENSE 2.5 from Here ( you can See its Pic Here)And Extract this file
5. you Have this folder With two Files CustomRUU.exe And a File With NBH suffix , IF this Folder Dosn't have CustomRUU.exe Download it from Here And Put it to this Folder
5. Run CustomRUU.exe -> Keep Clicking Check Box Button and Next Button until Appearing That Message Again : "verify the information on your PDAphone...Please wait"
6. Clicking Update Button And Next Button After That
7. you can see again Two Process Bars are Processing at the Same Time On your PC and PPC
8. After Finishing ->your PPC Restarts Automatically Again And you Have WM6.5+HTC SENSE 2.5 ON YOUR TOUCH DIAMOND
9. Enjoy. (This ROM Has Been Made And Cooked by donsalari So Much Fast and Stable and Also Really Nice)
Hi guyz!
I have heard it said some of the ROM updates cause some technical failure...like GPS failure or G-sensor....
I wanna ask someone, who have tried this ROM if its ok and will not make any defection!
Thanks in advance!
workes great