Database Users

wizard qwerty uk k'board layout help

i have a wizard runing qtek-wwe rom qwerty keys work ok but not the symbols they seem to have shiften 1 space left the (s has !) (the d has @) ect i would like uk layout please, is there a quick fix i have seared and forum for some reg hacks but these dont seem to work help please

mrbubble said:
i have a wizard runing qtek rom qwerty keys work ok but not the symbols they seem us i would like uk one please, is the a quick fix i have seared and founf some reg hacks but these dont seem to work help please
Click to expand...
Click to collapse
Did you install a US ROM? If so you should be able to fix this by installing a WWE ROM I think.

Yes you can fix it, its a simple registry entry, in the
HCKU\ControlPanel\keybd entry
add a DWORD called LOCALE with a value of 0809
Regards
Riptos

Problem With Keyboard !!!!!!!!!!!!!!

I just installed a new rom and everything work fine exept when i use the slide keyboard i try typing ( - ) and this appears ( " )
does anyone hot to fix it......?

please read! this has been answered too many times! go to the wiki and see hermes registry edits.
Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal).
The suitable value for German Hermes keyboard is 20407 (132103 in decimal).
The suitable value for Spanish Hermes keyboard is 2040a (132106 in decimal).
Probably Hermes use 20+country ID (409=WWE, 407=German, 404=Trad. Chinese, etc...) format for keyboard layout value.
Click to expand...
Click to collapse

fone_fanatic said:
please read! this has been answered too many times! go to the wiki and see hermes registry edits.
Click to expand...
Click to collapse
I agree...............use the heck out of the search option.
that being said.................
chipsxj said:
I changed to the number in bold and it worked for me:
Originally Posted by Marcmayer:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 [Change to 132100]
Works means all characters are displayed when the corresponding key is pressed and tab worked.
Click to expand...
Click to collapse
Required a reboot.

ET9 input method for Shadow

The input method come from official 1.11.531 WWR ROM
I just ctreated a cab file which can automatic install.
If you are english user using my rom.
you can use this to go back to ET9

It was not fully tested, because i dont have a shadow.
If it work, please send me a reply

Thanks for the Chinese rom. Though the T9 does not work. I can only type numbers after installing this one. Was trying to use the * button to change
input method in messaging, but the * button always just lock the device.
The Chinese input method works, though it does not match the keyboard layout at all. I guess a mapping instruction would be helpful if fix is not possible.

Thank you for your testing.
I will repack the Et9 and upload again

Hi, HiKey. I tried something else and this is an interesting thing I found.
I found this language pack and installed it. Funny thing is, none of the 14 languages showed up. BUT, now when I press and hold the *key, instead of locking the device, it now give me choice of Pinyin, Bihua, Number, T9, ZiMu(ABC), and I can choose and use each fine. So I guess that your rom may already have a few input options, but may need a reg change to the *key from lock to switching input method. Just my 2 cents.
http://www.modaco.com/content/htc-j...1925/modaco-shadow-xt9-language-pack-14-in-1/
Well, now I can input everything. Just not matching the Shadow keyboard layout. But still a great improvement. Thanks again for the great and stable ROM.
Hikey said:
Thank you for your testing.
I will repack the Et9 and upload again
Click to expand...
Click to collapse

Hikey said:
Thank you for your testing.
I will repack the Et9 and upload again
Click to expand...
Click to collapse
Has anyone gotten the old keypad layout back with the Chinese rom? It still isn't mapping correctly.

Hikey said:
The input method come from official 1.11.531 WWR ROM
I just ctreated a cab file which can automatic install.
If you are english user using my rom.
you can use this to go back to ET9
Click to expand...
Click to collapse
Testing now and thx for the contribution.
Are you sure it fits the 20 keys keypad of C750, also known as Shadow, Juno?

Use their new Shadow. His in Vietnam. How can turn off the default text from the T9 to ABC?
Thank>>>>>>>>>>>>>>>>>

HELP - Keyboard issue

Hello XDA
I have just noticed that the "?" key (FN P) is not typing the ? but an ";". Does anyone have any ideas?
Thanks

Fn P on my UK QWERTY X1 has ; on the keyboard. ? is at the bottom and doesn't need the Fn key.

Wierd,
Mine has the ? mark on the P key in blue. There must be a setting then for this somewhere in the OS

Austrian QUERTZ has the "?" on "Fn"+"P" and the ";" is "SHIFT"+","
Seems you have an English ROM installed but you would need a German one.

ok my keyboard is:
"?" on "Fn"+"P" the ";" is on "SHIFT"+"," the "+" is on "Fn"+"N". Any ideas

You have flashed UK rom on non UK device, that is your problem. Most of non UK X1 have localized keyboards and they will work ok only with org language rom. The only way for you is to find keyboard driver and swap it to your X1 orginal language.

Ok I just did a hard reset and it flashed itself. So I need to reload it somehow?

ell82 said:
You have flashed UK rom on non UK device, that is your problem. Most of non UK X1 have localized keyboards and they will work ok only with org language rom. The only way for you is to find keyboard driver and swap it to your X1 orginal language.
Click to expand...
Click to collapse
Are you kidding me?
Does not changing CurLang value work on X1?
Go to HKLM\HARDWARE\DEVICEMAP\KEYBD and there find CurLang value. You need to open the file and change the 1033 to the value of your device. I do not have the values here, but they are on XDA, please search the forums for the answer.

Where is your device from?

I assume that Austrian and German layouts are the same.
Go to the key I posted above and change it to 1031, close your reg editor and there probably is not even soft reset needed...
EDIT: If that gives the wrong layout try 3079 after that. (I do not know of this code is supported)

Under the device settings it shows GENERIC_UK... Other then that no idea, I do know the manuals came in some other language.. so not sure.

Use registry editor program, like the free Total Commander and do as I posted earlier.
Go to HKLM\HARDWARE\DEVICEMAP\KEYBD and there find CurLang value. You need to open the file and change the 1033 on that to 1031. '
(Note that I am guessing that your device has the German QWERTZ layout?)

Loco5150 said:
Use registry editor program, like the free Total Commander and do as I posted earlier.
Go to HKLM\HARDWARE\DEVICEMAP\KEYBD and there find CurLang value. You need to open the file and change the 1033 on that to 1031. '
(Note that I am guessing that your device has the German QWERTZ layout?)
Click to expand...
Click to collapse
I just tested this and it does work. Changing CurLang to 1031 changes the layout to QWERTZ and "?" is under "P" etc... Soft reset needed after change.
People please use the SEARCH on the boards. All these type of problems most likely have been addressed in other devices.

Loco5150
I got total commander installed, where do I find the registry at? Currently I am seeing a directory listing.

go to \\plugins, there is registry folder...

Well we are close! now the z and the y keys are backwards. Any other numbers to try? Thanks!

Ok then your device is not with German layout?
Clownzer said:
I do know the manuals came in some other language.. so not sure.
Click to expand...
Click to collapse
What country is this device from, that would help you know... Did you bought it used?

Bought it brand new from someone on Amazon, not sure what country it was from other than the booklets where not in English.

Clownzer said:
Bought it brand new from someone on Amazon, not sure what country it was from other than the booklets where not in English.
Click to expand...
Click to collapse
Best thing would be that you find out what country your device is from, the booklets should give you that info...
I think that you have bought a device that had a English rom installed by the seller and he did the right localization for it. Now that you did a hard reset everything went back to the original rom setup.
This will be no problem when you find out where your device is from.
Does it have a carrier branding?

Ok it looks like the manuals are in Swedish Language... Viktig Information is written on the main manual.
Also
Sweden address on the back of one of than manuals

hardware keyboard+ Custom ROM problem :S áü key doesnt work

hey guys
i noticed that i cant use the áü key on the keyboard :S
and i read that it is in all the custom ROM´s so :S
can someone fix this? because the key is sometimes necesary/comfortable
i'am using Charons lite and fast 1.3... how it is with the other who got a custom rom? can you use the áü key?^^

If you are using a ROM in a different language (which i do not think), try this.
Otherwise I would guess you have installed a differnt Softwarekeyboard.

software keyboard: XT9....but if i use the hardware keyboard....and for example i write a A...if i then press on the àü key it should be a another A...with some smybols or so^^ and if i press again i should scroll trough all the different A´s
the layout is OK...it is german..also QWERTZ ^^( Z is Z on the keyboard if i press it )

Different Softkeyboards can screw your áÜ button...try another one (the one from the R3A Update might (??) work...

derliebewolf said:
Different Softkeyboards can screw your áÜ button...try another one (the one from the R3A Update might (??) work...
Click to expand...
Click to collapse
there is a update for the XT9 keyboard?...i will search for it

Now i use a self cooked 6.5 WWE-Rom and can't get all the FN-Keys back on my german X1. Y and Z ar at the right place (after changing "CurLang" to 1031), the "ß" is working too. But all the other second allocations with FN on the HW keyboard don't work.
I remember on my old Herald there was a cab for bringing the complete german layout back - is there something similar to this out for the X1?
At least - is ist possible to change the layout before cooking?

I have now figured out, that the keys are working. But i have to press them for a long time and then i can't control how much sings would are printed. Is there any soution for this?