Related
Has anyone tried TomTom 6 ?
hi, yes i have tried it and i am a bit confused due to the problem i am experiencing. when i start tomtom 6 on my mda pro everything is ok , but, it dosnt work in landscape mode..i mean i does in landscape left-handed but it doesnt work in landscape right-handed mode, why is that , is there anyway to fix this problem. have a look at screens on the website:
http://pocketsoft.1500mb.com/
cheers, cudo
Anyone knows where to get the TomTom 6 yet?
I got it running and all fine.. also i am right handed....I can honestly say that this is the best navigation software out there as yet!! .....great stuff but no inbuilt screen rotation like the last version???.... apart from that AWESOME!!
wbr
Is it much different from 5.2?
What new features are there? Is it faster?
MUCH faster, it loads in less thatn half the time on my Blueangel
Midget_1990 said:
MUCH faster, it loads in less thatn half the time on my Blueangel
Click to expand...
Click to collapse
Back to Universals...
On the Exec:
No noticeable change in startup time. Slightly quicker if its already been used that day.
I would say it is slightly slower navigating in 3d mode than 5.21, particularly off the motorway (i.e. where it has more to draw). However it is faster than the sluggish 5.00. (5.21 was super smooth)
Not sure if it's due to the massive map file containing all western europe, as opposed to a lone UK map.
Left and Right hand landscape seem to work ok. I had some screen issues after installing & running tt6 without soft-reseting the Exec.
After soft-reset, was working fine.
Navigating through the options/setup menu windows is slightly sluggish too. Buttons seem to need a firmer (longer?) press to register and action the change/change pages etc. Sometimes the buttons will be highlighted, indicating it knows you pressed it, but not actually do anything.
I miss the sharp, quick response of the 5.21 menus.
This might cause problems whilst trying to quickly change setting/change destination whilst driving.
i was really hopping that the lanscape refresh was fixed in this version but it's not. Just have to live with it.
Hi, can anybody tell me where I can buy TOMTOM6, been look very hard and cannot find anywhere, cheer in advance
Hi, is any body willing to send me the TomTom6 files as I still cannot download them.
Thanks.
http://forum.xda-developers.com/viewtopic.php?t=53454&start=0&postdays=0&postorder=asc&highlight=
download the files from this ftp site :wink:
15th post down
That`s a dead link mate.
IE Link: ftp://xda+pcsmart24.com:[email protected]/
After clicking that link enter the username: [email protected] and the password: developers
try this then
Still a dead link!!
uh strange try this post in the forum then and scroll down to the 15th reply
http://forum.xda-developers.com/viewtopic.php?p=354321#354321
1st page of that thread 15th reply down
Are maps newer in version 6 vs version 5.2, or is the update just software?
Thanks.
BillB said:
Are maps newer in version 6 vs version 5.2, or is the update just software?
Thanks.
Click to expand...
Click to collapse
not sure if they're updated, but its still trying to navigate through several roads which have been blocked off for more than a year (in some cases since 2000) in Brum n West midlands...so as far as i am concerned its the same old maps.
Further to my previous post about speed of tt6:
When only using the "GB map with major roads of western europe"...it runs a little faster (3d nav + flicking through the menus), than when i was using the 800+MB map with all of western europe.
I still think 5.21 was smoother / more responsive in menus.
hate to think how it will run with the map of US which is > 1GB
tomtom 6
I have the tomtom6 running the GB plus map. it defenitely starts up quicker and the map is updated with new roads
Apparently, the older v5 maps are not compatible with this new v6. However, as far as i can ascertain, the POI are compatible so that is handy. I will try loading those later to check for myself.
Regarding the problems some are having. I also find the start up time has been vastly improved in this version. I only loaded the GB maps so cannot vouch for the speed of a full western europe installation. However, i can definately say that the speed with this version is quicker than v5 maps.
As for the "Rotate" function, this is correct, it has been removed from v6. Why this is so i have absolutely no idea, as i found this feature not only useful, but it became absolutely essential. Due to the car holder, i have to use the Universal in landscape mode and rotated 180*. Therefore, i have to make sure that the screen is rotated the correct way before starting tomtom. TomTom will use the orientation that the Universal is set at upon startup, so if you forget, you have to close it, rotate the screen and then restart tomtom again!
Initially, this was a major pain. But i can assure everyone that it is amazing how quickly you will adapt and remember to set the orientation before using the tomtom. I really thought that it was going to be a major problem and was about to revert back to v5. Thankfully i stuck with it as it is a better product than v5 imho.
If you like this version, i recommend supporting tomtom by purchasing this fine release, thereby ensuring the continued development of the TomTOm PDA releases!
[/img][/i]
Since yesterday I have registered my copy of Navigon MN7 from my G900 (WVGA too) to the X1 (no problems, thanks to the service of Navigon).
I changed the files as attached. If you use them, place them in main folder of Navigon on the storage card and the ApplicationSettings to the settings directory.
BUT ATTENTION: This is of a german G900. Therefore it may be possible that you have to change some lines in the files form "Speicherkarte" to "Starge Card". I didn't look at this! After zipping them on the PC just open them first with text editing program and look if there ist "Speicherkarte" written somewhere in the file. Change this to the language of your X1.
My experiance of the X1 with the MN7 ist great, if you accept two bugs, it has now, even an update is announced for the next days...
1. You only can use WVGA in the Portrait Mode. In Landscape Mode it is only VGA. It works, but with a black stripe on the right site. I don't mind because I am using only Portrait Mode.
2. MN7 finds the gps of X1 at once with the automatic search. But as it is with other internal GPS too, it can not hold the connection more than 1-2 minutes. You have first to start a program, that holds the connection (I use GPS-Skinner) and then start MN7 and everything works fine. This is a known Bug Navigon is working at and an update is announced for the beginning of November.
If you accept this, you get a great navigation experiance. The internal gps is faster than every gps I ever had. Even my GNS 5843, which is a great quality product. X1 fixes faster and finds and holds more satelittes!
The speed ist great. My G900 (WVGA too) needed 40+x seconds to start MN7, the X1 about 15 seconds. Everything responses very fast. Calculating a route needs 3-5 seconds. Typing the adress about 1-3 seconds for response. Worlds between earlier versions of MN.
With this great internal GPS it gives a complete new feeling of navigation to me, and I use Navigon since a lot of years
first thx for the files, but this two bugs are crazy, specialy the GPS Bug, I tried IGO and Garmin XT, they both work perfect, without any GPS loss, or Problems with WVGA, so if you drive many in EU also East EU then i would take IGO 2008, they havr the best Maps there, it is very fast, and runs smooth.
Regards cHarOn
cHarOn99 said:
first thx for the files, but this two bugs are crazy, specialy the GPS Bug, I tried IGO and Garmin XT, they both work perfect, without any GPS loss, or Problems with WVGA, so if you drive many in EU also East EU then i would take IGO 2008, they havr the best Maps there, it is very fast, and runs smooth.
Regards cHarOn
Click to expand...
Click to collapse
i agree that Igo works fine, but if we compare maps like Italy, navigon has more streets in navigon in europe.( Latvia is very bad.) I faced this because one truck driver asked to fix for him latest maps for navigon and I was thinking that igo would be better and got for him igo, but then he started complaining that there are missing blocks of sreets.
In Latvia tomtom works the best. Igo cant find adresses.and has problems with routs
but still my favorit is igo
Your file BinaryConfig.xml seems to be corrupted ??? It cannot be opened.
Hi,
I have installed Navigon 7 to my X1 and I have used the files posted here to see if it works, however when I launch the app I get the splash screen with the spinning logo and then after about 15-20 seconds that diapears and the phone drops back in the last panel I was using i.e Today panel.. but the start bar at the top of the screen has disapeared..?
Any ideas..
I have uninstalled and reinstalled many times but that doesnt help.. and the only way to get the start bar back is to reboot the phone.
Any help would be greatly appreciated.
Hi,
once you rebooted the X1, it should start without any problems every time you start MN7.
Had the same problem. Since reboot it works flawlessly.
Chris
Hi Chris,
Thanks for the reply.. Unfortunatly I get the same problem everytime I reboot the phone.. Launch the app get the splash screen and then it drops back to Panel but without the start bar.. Reboot.. start again.. and again.. etc..
Shame really as it looks like a good sat nav and would like to play with a specially extended trial version before I purchase the app
I've just signed up for the beta of telmap which works fine on the x1 (although they don't give you an option for it,so the stellar or diamond versions work).
You say you have replaced the three files with the WVGA ones? hmmm...
Maybe it is because of the trail version? well, doesn't really make sense...
One more option to get it running is, maybe, to do the thing in landscape mode?
First turn your screen and then start MN app. Well, you never know...
Chris
After completely removing the app and the navigon directory from the phone and then doing a registry clean and a general tidy up of the storage on the phone I re-copied the Navigon directory with its contents to the phone and then copied the files from the first post in this thread and I can now launch the app without it dropping back to the panel, however now it asks for a serial key.. anyone have a keygen for this app.. as its currenlty asking me to go to the navigon site with the device id and register for a serial..
hello,
i have the following problem.
i coppied all file on the card, then installed the prog.
i can start it from the file manager, but if i want to try it from start... and press the icon, nothing happens...
does anyone have an idea, what this could be?
(if my english is not that perfekt, i am from germany and i am trying,hehe)
gruss,
maik
Nothing. I can't cancel my previous message.
Navigon MobileNavigator 7.3.1 Xperia Fix
Hello Guys,
i had just installed the Navigon 7.3.1 with the patch in the attachment that the only one which works
copy the "ApplicationSettings.XML" in the folder: "settings" and the two files : "BinaryConfig a. CacheConfig" in the Folder "Navigon"
And if you want to start the program in the landscape mod you have to install the "MN7LS.ARM.CAB"
View attachment 7.3.1.zip
View attachment MN7LS.ARM.CAB
MN7 working now
Many thanks to rookie333 I was finally able to get the test version of MN7 running
Its such a simple solution. Shame on Navigon Support for not being able to help at all and for their product being so poor designed to not include 800x480 resultions.
Normally I use it in the portrait mode. But one of the many flaws in Navigon software is that reality view only works in landscape mode.
But when I switch to landscape mode the screen gets broken. Any idea why?
In comparison to Tomtom the MN7 is not ready for 800x480 devices.
The whole display is stretched in length and squashed in width.
Everything on the map is so tiny you cannot read it, so symbols and text are unusable. The great lane-assistant from version 6 is now a tiny icon on the side.
All together MN7 on X1 is a big disappointment. Hopefully Navigon comes up with some patches soon.
But as I know Navigon development and support for years now, that will not happen soon.
So I will stick with my MN6 on PDA or change to Tomtom.
Tomtom on the other hand looks like it was build for the X1. It completely fits the screen, without stretching or squashing. Icons and text are great.
Regards
pt
You have to start Navigon in landscape mode, but you cannot switch while the program is running. I don't think it's squashed or stretched. The interface is VGA, but with X1's high dpi, it looks good. The map is just perfect with the attached XML files. The xml files are from the Touch HD forum, but with modified BinaryConfig.xml.
Landscape Mode
My Xperia will not start Navigon in Landscape mode. It sort of freezes up the Xperia which then needs restarting. Is the CAB language specific?
In Portrait mode it is useless (see edit below) as the useful part of the view (betweern the Arrow and the horizon) is just a tiny slit shown in my attached photo. Compare that of the official picture where the position arrow is much lower down and the horizon is near the top of the screen as it should be.
On the Xperia, one third of the screen is taken up by sky!
Also the Position Arrow with its circle cover up important parts of road junctions making it hard to see where to drive.
Edit: OK Now I've installed it all again, and copied the XML files again and now it is much better. The sky only take up a small amount of the screen and the arrow is lower down. What is going on? Is it dependent on the XML files?
Does anybody know how to turn on TMC on Mobile Navigator 7. I didn't setup it during first install but i discovered i can do it ....
I don't know how to setup again
Finaly i have something else than wayfinder. Thanks Rookie333 for excellent instruction.
I successfully used your configuration on my Xperia R1A. Navigon now launches in WVGA portrait (but I am unable to run it in landscape mode, even with the cab given in this thread, it fails with a message "unable to find mobilenavigator7.exe", quite strange).
But my real problem is : each time I start navigon, there is no GPS defined. So I have to configure it, using assistant. It finds the internal GPS, and it works for a short time.
Then during navigation it stops working. If I check the GPS status, there is no GPS device detected again. I have to detect the GPS again, etc ... and it works for several minutes, then fail again ...
Any idea why Navigon is loosing connection to the GPS so often ?
HI
Can i know where is the installation file
Hi to All,
i want to be provocative and make a strong statement to know your opinion:
the conclusion: navigon 7.3.0 is superior in all aspects to TomTom 7.910.
In fact, i am having a very pleasant experience with Navigon after many years of TomTom "study".
In summary, the added benefits which i see:
definitely a clearer graphics, both in 2D and 3D in particular realview and also special highway indications to make driving safer. This includes more information like the turn after the next one.
NavTeq maps are, at least in my area, much more detailed and precise with respect to roads and also speed limits indications are strictly matching the signs!
Richer and more informative POI collection (for example, with the actual logos and graphics for the different fuel stations, supermarkets, etc.etc.)
text to speech by default: in french it is really excellent!
Cheaper: 99 Euros (149 with the 2 years maps subscription) is definitely less than TomTom....if a touch HD owner could buy it!
fix is instantaneous in Navigon: time that the software loads, the gps is already there!
Now the remaining defects of Navigon:
to install it you have to use a mortscript and modified xml files (all listed in other threads)
still, in 800x480 the screen aspect ratio is slightly distorted (see other threads)
exiting from the program is surprisingly slow!
switching from landscape to portrait and viceversa can only be done at startup (actually, i like this behaviour but i am probably the only one...)
Still, the touch HD is not an officially supported device. However, differently from TomTom, they don't try to keep you out and allow freshmaps and synchronization, for example.
Just wanted to propagate my experience, since the small installation issues related to point 1. were somehow keeping me away from this fantastic product. In addition, TomTom pissed me off - since i sincerely tried to buy it and at the end they refunded me since i didn't have an HTC Touch but "only" a Touch HD...e.g. "only" the best PDA ever! Maybe it is too much nicer than TomTom PNA boxes?
...Am i right?
for the speedcam alerts navigon is still a bad solution and even with the mortscript mn7 doesn't run on some hd... igo 8 seems to be the best solution...
i like Navigon but the interface could be improved. I can't see the info because the text is too small which is a problem on my motor bike. Also there is a lot of wasted space in the direction arrow window which could be used better. All the info in the dreaded TomTom is very clear on the motor bike so no stress trying to read the info - I never use voices while driving - would drive me nuts.
Would be nice to see some screen shots of both and other software even for comparison.
custardo01 said:
I never use voices while driving - would drive me nuts.
Click to expand...
Click to collapse
Really? When I'm on my motorcycle, I have my HD in my jacket pocket and use the earphones for voice Nav. I can't imagine navigating the Swiss mountain roads while watching a PDA screen! Anyway, maybe your eyes are faster than mine
I agree
and what about Navigon Vs IGO8??
i think IGO8 is the best navi on pda...
I have Navigon and TomTom installed on my HD. TomTom has all hi res graphics whereas Navigon has some stretched graphics in some places. Maps are hi res in both. However, Navigon has Text to Speech and announce road names whereas TomTom does not. That does it for me
When forced to use mortscript to simply install a program - it can´t be a goot solution anyway. I even had a hard time go get iGO running.
For Navigon, I never used mortscript. Installed fine with WVGA xml files. All works fine, except I get the memory errors. After several taps of the ok button it finally runs ok.
Totally agree...
I'm using Navigon since the version 5 on PDAphone... and it was since the beginning a lot better than Tomtom !!
From my point of view, Tomtom always had the world's ugliest graphical interface...!!
The version 7.450 is still installed on my HD, and the only positive points are the speedy loading time and the Master Yoda’s voice… ;-)
Right now, with the version 7 of Navigon, I'm also a bit disappointed with the too small text... however the maps are a lot more accurate than the Tomtom maps !!
I'm also using iGo 8 sometimes... not bad at all !!
Morning all,
First I would like to wish everyone in the states a very happy turkey holiday. Hopefully yours was as excellent as mine was.
Now onto the real business. I have an Imagio that for the most part I love. While I cannot wait for the SPL and to be able to build custom ROMs I am waiting patiently.
I am trying to run iGo8 on the Imagio and have not found any definitive way of doing it. I have cobbled together some details that work, but are not very stable. Here is what I have currently:
1) iGo8.3.2 97313
2) TTS Susan
3) Dimka HD skin
I searched this section and found a thread on how to get iGo8 to run in landscape 800x480 mode. While this was helpful for the default iGo skin it blows up when trying to use the Dimka HD skin. Second TTS does not work at all, whether I have TF3D running or not. I get no soothing Susan!
I was wondering how people are doing with iGo8 and how do you have it running.
Thanks,
Steve
running 8.3.4 with default skin which I love at the native resolution and it runs perfectly!
Best 3d gps software out there.
I'm running 8.3.4.10280 installed on my SD card, can't get TTS to work but otherwise runs great in landscape or portrait. I'm using "Dave" for regular voice but no matter what I try I can't get TTS to work.
Interestingly this version can read the "geocoded" contacts addresses that prior versions can generate from your WM contacts but it can't generate the file itself so....
If you want to get your contacts to display on the map as POI, you need a different version. I currently have another version (8.3.2.97313) installed in main memory and when I add a contact I'll run this version that will generate the needed file and it adds it to the contacts on the card. This was the only feature that I thought TomTom had over the iGo but now that I got it working iGo tops TomTom in eye candy and utility (IMHO).
Please don't ask where to get the files, they're out there on the interwebs, seek and ye shall find....
Hi
I just install the igo navigation on my desire, the program seens to work fine but i have the following problem i can get the aplication running on full screen , how i can do that? i can't find any settings on the program for change the resolution.
Regards
Quite simple you can't!
The resolution of the Desire (and the N1, and the droid, etc) isn't supported yet.
I tryed navigon and it works great. you should give it a try.
thx for you fast reply , dit you know when will be suported?
You can try this: download from HERE motonav and install it then rename the igo folder on the sd card to motonav and there you go. full screen igo amigo with a diferent skin.
Wondering if this really works.....
Had motonav installed on my Desire, but because the resolution of the Milestone is different from the Desire, you're missing a few bottom pixels/buttons.
I've already send iGo an e-mail but until now I never received an answer.
I've tried all the different best known navigation software available on Android (Navigon, Motonav, Sygic and now CoPilot) but all have there strength and weaknesses. I really don't have a favorit.
On WM my favorite was iGo or Navigon. Actually I thought I preferred Navigon but it didn't run smooth enough on my Xperia so I sticked with iGo.
But it looks like they somehow leave features out of the navigation on Android.
On android navigon looks great, but it gives an error when navigating to a different country then the one you live in (if someone has an solution please let me know), and I'm missing some information on the screen like how much time and distance left till you reach the destination.
CoPilot looks more for children... Big colorfull icons which sometimes interfere with the interface (eg the speedlimit indicator).
Motonav works great, but couldn't get the speedcameras to work, and it also looks a bit depressive with the purple/brown/grey colors. Also important information was missing, you had to press on the screen first to see that information. Not really safe doing this when you're driving your car.
Sygic sometimes calculates really strange routes. And the newest version 10 didn't work smooth on my desire. During driving it wasn't smooth at all. Even though I had turned of all the online services.... Maybe I had the wrong version. Don't really know.
After all I now stick with CoPilot because it has the most options I want, runs smooth, but for me it far from ideal.
The smoothest runs Navigon.
The best would be a combination between Navigon and iGo/Motonav...
But to come back on topic, if you've tried the solution of R3dD3vil please let me know
Owww I see the version of R3dD3vil is a special 480x800 version..... Hmm that's solves a bit of the problems
@Bart1981,
Do you have the 30 day trial avigo? Because one of the limits is navigation in 1 country only.
Let's say it this way, I had a modified version of the Navigon trial
But that would explain the thing
btw the file posted bij R3dD3vil works. But it's not flawless....
Sometimes some text and numbers are interfering with eachother. And the menueffect are not that fluently as they are in the original motonav file. But it works
I saw this was version 2, so properbly there will come some other finetuned versions....
any news on igo / motonav version that would work flawlessly?
Regards,s
yes, the motonav link from top is working 100%. i have it on my desire, and works flawless! i'm in argentina, and without it i think i have to drive off roads, in the air!!! this is the link
are speedcams working with MotoNav?
Yes , working fine here.
yep, for me too.
have you put them into content/speedcam?
yep,overthere
works great here
wow, that simple!!! Just took my maps,POI etc from another nav I have for my WM phone and it works!
G
iGO on Desire
Hi, I need some help. I installed iGO with skin from MotoNav. but I have a problem with speedcam , not to show my nothing. What files should exist in sdcard/motonav/content/speedcam ? I'm interested in the following countries Norway, Denmark, Germany, Austria, Slovakia, Hungary, and Romania. I have these files in the folder speedcam:
speedcam.spdb,
SpeedcamUpdates.spud
SpeedCam_EU__14-03-2010_
Is there any application or software that automatically turn on the GPS? I mean I do not have every time before opening the navigation application, first enable the GPS on.
maybogdan82 said:
Is there any application or software that automatically turn on the GPS? I mean I do not have every time before opening the navigation application, first enable the GPS on.
Click to expand...
Click to collapse
From what I understand you can leave the GPS on at all times. Android actually powers it on only if needed, so it shouldn't be on whe you are not using the navigation software. You can check this easily since the GPS icon at the top only shows when you open the navigation software.
Speedcam
ady_uaic said:
yep, for me too.
Click to expand...
Click to collapse
Can you put at least a picture from your device when showing you at least a speed camera? And I mean not the speed limit signs on the device.