I have run into a strange problem. I have spent the last 2 days trying to flash the Fresh Rom back onto my phone. I had some problems while trying to do Apps to SD. Flashed back to stock, Updated and rerooted. I can restore all backups of the original sprint ROM. Every time I flash Fresh 1.0 or restore one of my nandroid backups for Fresh it will get stuck in a boot loop. I have searched everywhere and tried every possible option and can not get this Rom back on the phone. Anyone have any ideas?
first off, do you have a modded Recovery Menu? Because you need one, it is in the forums, i believe it is stickyed, but if its not search for it.
second, did you download the right ROM for YOUR phone?
Third, is the download a good download? it is possible it is corrupt.
put ALL these into consideration.
That what I was gonna ask gotta make sure you're rooted for flashing first! Good luck and let us know if you have any questions...if the directions for rooting viat the Android SDK are too confusing for you like they were for me search the forum for the "flashrec" way of rooting your phone so easy a caveman can do it!
Also be sure to get the base 1.29 RUU just to have if you need to default to stock and I found with my Sprint Hero model that recovey image 1.5.2 works best for back up and restoring 1.2.3 didn't work at all for me hence the need to run the base RUU anytime I tried to restore lol.
Yes I did all of that. I had it flashed with the fresh Rom before. Used the same files that where on my card even redownloaded. No go.
Related
I know there is all kinds of information out there on returning a phone to stock, but I cannot seem to get anything to work. I flashed my Magic with the engineering spl, set up a custom recovery image and rom, but now I need to return it back to stock to exchange it... I've tried the old rogers wiped rom, and I've tried a rooted version and a signed version... I can't seem to get anything to properly flash on to this phone now... I can flash any of the fun cool roms, but no boring old stock. The closest success I had was the signed rom installed, but hung on the rogers boot screen. the other ones all complain that they are unsigned. Any advice? I need to get this thing restored ASAP, and I would normally muck with it myself, but I don't have the time to play around anymore. I need to ship this thing back in 10 days or less now... Please?
Before you flashed anything, you should have fastboot-ed a recovery image & did a nandroid backup of your stock ROM.
Did you do it?
Before you flashed anything, you should have fastboot-ed a recovery image & did a nandroid backup of your stock ROM.
Did you do it?
Use the search button. This has been asked before. And this is not question and answer. Post in right forum.
Reported
This is not development related. Please post in the correct forum next time.
When I first became active, I rooted my phone, I made a recovery off the original recovery rom. I updated to the what my phone says is the unofficial modaco rom v1.3 + an update
+ a theme.... bu then me and my girl split and my recovery images were on a flash device she had. I see some stuff about an updated version of recovery... talk of radio's amongst other things.
I'm assuming I just most likely need to flash back to an original root and then possibly the instructions I need to get the new recovery image as well as the 2.0 stuff on my phone. <--- is this basically what I need to do???
Cloned2 said:
When I first became active, I rooted my phone, I made a recovery off the original recovery rom. I updated to the what my phone says is the unofficial modaco rom v1.3 + an update
+ a theme.... bu then me and my girl split and my recovery images were on a flash device she had. I see some stuff about an updated version of recovery... talk of radio's amongst other things.
I'm assuming I just most likely need to flash back to an original root and then possibly the instructions I need to get the new recovery image as well as the 2.0 stuff on my phone. <--- is this basically what I need to do???
Click to expand...
Click to collapse
Flash a new recovery....fisrt things first
Then do factory data wipe from recovery.
You should probably reformat your SD card...
Wipe Dalvik....
then flash any of the good ole' zips that are up now..
Personally before I do any more flashing I am waiting on sprint release OR this new "Toasts Awesome Sauce" I see in another thread...if it blows everyone else away speed wise....I hope they got OC working.
Only reason I am waiting for an official sprint is because I am sick of wiping my phone ~ to lazy to back up ~.
Cloned2 said:
I'm assuming I just most likely need to flash back to an original root and then possibly the instructions I need to get the new recovery image as well as the 2.0 stuff on my phone. <--- is this basically what I need to do???
Click to expand...
Click to collapse
You don't have to install the new recovery to flash the 2.x ROM's. However, the new RA 1.6.2 was updated and had some bugs fixed, with also a little more added features, so it's probably worth your time to download and flash.
To flash a 2.x ROM, just do as you did before, find one you think you might like, download it and then copy it to your SD Card, after that its a matter of Nadroid back up and then flashing the new ROM.
thanks for the heads up guys.
I just couldn't be sure if there were things that needed to be changed outside of just flashing the new roms.
Back when i was more active I recall there being some roms that you couldn't flash from but a factory reset will revert me out of my modoca flash so that, that problem doesn't potentially crop up?
I just purchased a HERO 6262 GSM on ebay and looks like it is already rooted and is running FirmwareVerison: Villain5.2, Baseband version:63.18.55.06EU_6.35.06.18, but I want to go back to stock HTC rom. I've installed HTC Sync and downloaded two different RUU's and try to install but it fails. I've tried RUU_Hero_HTC_WWE_1.76.405.6_WWE_release_signed_NoDriver and RUU_Hero_HTC_WWE_1.76.405.1_R3_WWE_release_signed_NoDriver.
It acts like it is going to install the rom, but it fails. In the RUU I get error 140: Bootloader version error. What am I doing wrong? Or which Stock rom should I install.....please help. I would also like the ability to root again and go to Villain down the road.
Much thanks and all help is appreciated!
Nevermind.....I just downloaded and installed RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver without any problems. So I guess I must use this one from now on to go back to stock version. How about how to reinstall Villain 5.2? Much thanks.
Well you haven't done yourself any favours, putting an official, non-rooted ROM on, then wanting to re-root it later.
Goldcard for you methinks.
Lol
You should have read more before you messed with the phone...
You should have done android backup first.
Now
I think you have to.. root.. then load the new ROM.
Sent from my HERO200 using Tapatalk
why would you buy a rooted phone, just to throw some stock firmware on there to want to root it again?
*Facepalm*
Because I wanted to make sure the phone was all good and not screwed up by the previous owner......looks like I gotta use the goldcard method to root it. However, which ROM do you guys recommend?
with the ruu 2.73.405.5 you can use flashrec-20090815.apk and flash recovery image without goldcard
knudsen81 said:
with the ruu 2.73.405.5 you can use flashrec-20090815.apk and flash recovery image without goldcard
Click to expand...
Click to collapse
Seconded. That's actually the RUU I used, to downgrade to, via a gold card. So at least the OP has saved themselves the hassle of that.
I have searched and searched, tried every method, but I am offically stuck (I think) - I'm prepping a rooted Eris for return - i had previously been able to flash the 2.1 RUU to return to stock, but it now will not work - I guess somewhere along the lines of rooting/ROM flashing my bootloader has changed (it is now v1.49.000) - I can't get any RUU to work (get ERROR in RUU interface) - I have also tried flashing a P00IMG through HBOOT, but it also errors out (something is older than something else - forgot exactly) - I have tried flashing new HBOOT/Recovery Image through ADB per a JCASE post, but that will not work either - I've gotten older ROM's loaded that will allow for new OTA updates, but they ultimately will not work (signature issues i believe) -
So the question is, is there a method that will get me back to 2.1 "stock" & get rid of Amon Ra recovery?
Again, I have searched and tried every method I could find - I have updated my SDK - help anyone?
Ive seen people just send in rooted ones without any problem, so I dont know if they'll check. But if your worried, i would just flash a 2.1 rom that looks like the stock, cause i dont think they'll know the difference.
Do you have a Nandroid backup from when you first rooted?
crax0r said:
Do you have a Nandroid backup from when you first rooted?
Click to expand...
Click to collapse
Unfortunately I don't have it - you wanna loan me yours?
I'm only kind of kidding....
download unzipme.zip which jcase removed on xda from here http://androidmobileos.com/?p=14928 Inside theres dowgrade rom that you flash through custom recovery (which ever one you use). After that you just follow the instructions (adb parts). Works very well. If you will have any issues with adb part as far as flashing back to stock recovery and hboot than check your hboot version and make sure its s-off. If its not you can get it s-off with batery pull trick.
i had an issue like this where the ruu would say that my phone was disconnected and told me to connect it to the computer,i was on a froyo rom,i flashed a 2.1 rom and the ruu worked,just an fyi just incase this might help if you want to return to stock 2.1,once you run the ruu and sync with google you wiil receive the july update also.
sent from my Eris using Tapatalk pro
Hi all, thanks in advance for any help and my apologies if this exact problem has already been resolved. I searched through this forum and found issues *similar* to my problem but nothing exact enough for me to find a solution.
My experience with Android is limited but have quite a bit of terminal UNIX experience...so I'm not a total noob and I can follow directions pretty well.
I purchased a MT3G from someone and everything seemed to be in order when I checked it out (and the price was good, so I figured I didn't have much to lose). He was running Cyanogen Mod on there but of course I wanted to restore to factory settings and build it up from scratch on my own. Thinking that I knew what I was doing, I booted into Recovery (Home/End key simultaneously) with no issues and ran the factory reset utility, thinking that this would just drop the phone back to factory settings and I could re-root it from there. When I turn the phone back on, it just hangs at the "splash" screen and runs the animation over and over again.
I can still boot into Recovery and I can get into Fast Boot so I hope I am not bricked.
Here is the output I get from Fast Boot (attached file).
I tried to restore with a SAPPIMG.zip that I found but it said wrong device...
Any help would be GREATLY appreciated. Thanks!
http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
If you get an error, you need to download an engineering spl, and then try. (Engineering 2010 SPL)
The link and instructions are around somewhere on XDA.
Thanks for the help!
Unfortunately I already tried that and it didn't work, so I guess I'll install the Engineering SPL when I get home.
Shouldn't I in theory just be able to flash another ROM over this one and have everything be back to normal?
Vontropnats said:
Thanks for the help!
Unfortunately I already tried that and it didn't work, so I guess I'll install the Engineering SPL when I get home.
Shouldn't I in theory just be able to flash another ROM over this one and have everything be back to normal?
Click to expand...
Click to collapse
Yes sir, that is the easy way!
there are plenty of 1.6, and 2.2 roms out there.
Just download to sdcard, boot into recovery, wipe and flash
Don't flash any SPLs. Your fine as long as you've got a custom recovery. Just flash another ROM from there and make sure you wipe data, dalvik-cache, and cache before flashing. I've been running CyanogenMod 5.0.8 since the summer (CM6 ran like crap) and I've been happy with it so far.
Sent from my HTC Magic using Tapatalk
Thanks for the advice guys.
Unfortunately I already flashed a different SPL and then un-rooted my device!
It works great, but now in order to get 2.2, I have to root it again which is a royal pain because I don't have a microSD reader and based on my research, the only way to root it it to make a goldcard!
Doh well! Learn something new everyday!
Vontropnats said:
Thanks for the advice guys.
Unfortunately I already flashed a different SPL and then un-rooted my device!
It works great, but now in order to get 2.2, I have to root it again which is a royal pain because I don't have a microSD reader and based on my research, the only way to root it it to make a goldcard!
Doh well! Learn something new everyday!
Click to expand...
Click to collapse
Not true you can root using the this app then use rom manager to install clockwork mod recovery. This is how I helped my friend root his device.
attached is the app