27 said:
Munyuk81 said:
O yeah, i like this program that dopod uses, "usb switch" cause it seems that when in serial mode it sync better and connect faster unlike in RNDIS mode. is there anyway to make it permanently in serial mode?
Click to expand...
Click to collapse
Anybody?
Click to expand...
Click to collapse
Is there a way to do this?
I don't recommend doing this, so do a backup first because it can be a pain to undo. Let me know if it works or not.
V
vijay555 said:
I don't recommend doing this, so do a backup first because it can be a pain to undo. Let me know if it works or not.
V
Click to expand...
Click to collapse
Vijay.
I have one instance of USB switch installed.
It temporarily sets the switch to Serial but needs to be re-set after every soft reset.
Does this version make it permanent?
vijay555 said:
I don't recommend doing this, so do a backup first because it can be a pain to undo. Let me know if it works or not.
V
Click to expand...
Click to collapse
This is no different to the version I had installed beforehand.
Is there a way to permanently set it to serial?
???????????????????????????????????????
No idea - it's pulled out of the Tornado rom. I used it once, it screwed my activesync, I never used it again.
I can't really see the benefit of the idea though. RNDIS works well, when it works.
If there's a registry setting that it forces (which it probably does), you could extract it and I could make you a program to make it a permanent setting. But, I'm not trying the program again as it is, because of my previous bad experiences with it.
V
vijay555 said:
I can't really see the benefit of the idea though. RNDIS works well, when it works.
V
Click to expand...
Click to collapse
Exactly, as you say 'when it works' since i installed a new wifi card and started using higher encryption RNDIS no longer works
so the benifit is the fact that i can actually sync with my laptop, which previously i had to either do it server based, of fire up my desktop pc (which i dont really use anymore)
i have had a good search through the registry and not managed to find a key that will permanently set to serial mode
Yes!!! i was having problem with activesync too and this USB Switch solved the problem for me! thanks!!!
Is there anything to do on the computer to get this working?
After I switched my Qtek S200 to serial, a new peripheral was detected... but nothing new with activesync... no sync at all…
In RNDIS mode, it syncs correctly with outlook, but not with my exchange server… and I can not surf the net while connected to usb…
In HLM/Drivers/USB/FunctionDrivers you can find the "DefaultClientDriver = RNDIS". I think here you can change the default setting. (Not tested ...)
I'm waiting to receive my Jamin and I'd like to know if is it simple to use it as pendrive...
It requires any additional sw or is it a WM5 features?
search for WM5Storage (I think).
WM5torage attached for you.
Thanks!!! ;-)
Koksie said:
WM5torage attached for you.
Click to expand...
Click to collapse
wow thanks this is cool.
Can this be turned on automatically as soon as i plug in the USB cable?
without having to Manually click the WMstorare shortcut?
Nope.
Thanks
Thanks for this util...works great.
does this tool support usb2.0?
I think it does, if the device and the desktop support it. It just enables the USB port of the device to be used without using AS. Since the current devices do not support USB 2.0, we cannot know for sure.
Is there a way to connect my 8525 to an external monitor? My bluetooth keyboard and mouse work great -- now if I could connect an external monitor, this can become one hell of a tool!
This sounds cool, not sure what I'd use it for at this moment but still a good idea.
Does anyone know if there is a cable that can do this for the 8525?
not the anwser you are looking for
I know this is not what you want. The link below is to software that will allow you to view your phones screen on your computers monitor, and control it with your computer mouse and keyboard.
My Mobiler v1.0
Maybe it will be the answer for some people.
Definitely not what the OP was asking for, but damn cool just the same.
Thanks for that link. I'm not sure I even wanted, let alone needed that app, but I'm certainly going to use it now.
anyone know is this exists
I have been searching for something like this as well. If anyone knows of a cable for monitor out or if it is even possible I would appreciate knowing as well thanks.
samhnky said:
My Mobiler v1.0
Click to expand...
Click to collapse
That is some coolsheit!
thanks for the link!
Bbasso said:
That is some coolsheit!
thanks for the link!
Click to expand...
Click to collapse
Well, you havn't tried SOTI POCKET CONTROLLER yet. That one is commercial but has even lots of other stuff integrated, such as screen capture, screen recording and a DOS prompt box ...
http://www.soti.net
There used to be...
There used to be a manufacturer making SD cards with TV-out for making presentations from a ppc. Not seen one for a while! If I remember correctly you used to be able to get them from expansys...
Happy hunting!
Hi forum-users,
I´m new to this forum, it´s great, thanks to all posters.... I´m german, please excuse my weak english.
I searched the forum for a solution for my problem, but didn´t find it:
I´m using the built-in software "Remote Desktop", and it works fine, except that I´m not able to switch between fullscreen-mode and the mode where i have menus and can use the onscreen-keyboard.
How can I toggle between fullscreen-mode and non-fullscreen-mode.
Non of the 7 keys of the touch HD seems to have this function.....
thanks a lot for your advices.
AsterX
Hi AsterX, welcome to the forum.
I also do have a problem with RDP Mobile. I never get a connection with RDP Mobile to my local PC. I set up the wlan, connected to it, but if I try to connect to the PC it never succeds.
Does anybody know what it could be?
(DHCP is off in my LAN)
Ascenca83 said:
Hi AsterX, welcome to the forum.
I also do have a problem with RDP Mobile. I never get a connection with RDP Mobile to my local PC. I set up the wlan, connected to it, but if I try to connect to the PC it never succeds.
Does anybody know what it could be?
(DHCP is off in my LAN)
Click to expand...
Click to collapse
- Do you have remote function enabled on target-device?
- Do you have specified an account for remote?
- Firewall rule active for remote-desktop?
- Can you connect a shared folder via Mobile Explorer?
Please check these points.
D-Jay said:
- Do you have remote function enabled on target-device?
- Do you have specified an account for remote?
- Firewall rule active for remote-desktop?
- Can you connect a shared folder via Mobile Explorer?
Please check these points.
Click to expand...
Click to collapse
Hi D-Jay
Thanks for your answer.
Indeed all points you mentioned are fine cos I use my second PC (client) to get to the server trough RDP. So I dont know why it doesnt work with the mobile.
I tried to connect with the same account I am using from the client PC, so it should work, doesnt it?
Ascenca
AsterX said:
Hi forum-users,
I´m new to this forum, it´s great, thanks to all posters.... I´m german, please excuse my weak english.
I searched the forum for a solution for my problem, but didn´t find it:
I´m using the built-in software "Remote Desktop", and it works fine, except that I´m not able to switch between fullscreen-mode and the mode where i have menus and can use the onscreen-keyboard.
How can I toggle between fullscreen-mode and non-fullscreen-mode.
Non of the 7 keys of the touch HD seems to have this function.....
thanks a lot for your advices.
AsterX
Click to expand...
Click to collapse
try double tap the screen to go to full screen, if there isn't a menu.
Hi buggybug0,
thanks for Your reply.
I already tried double tapping on the screen, also I tried long tapping/holding on then screen. Up to now I didn´t find any way to toggle from fullscreen to ´normal´ screen.
Any further ideas?
AsterX
AsterX said:
Hi buggybug0,
thanks for Your reply.
I already tried double tapping on the screen, also I tried long tapping/holding on then screen. Up to now I didn´t find any way to toggle from fullscreen to ´normal´ screen.
Any further ideas?
AsterX
Click to expand...
Click to collapse
ahh.. well my HD won't arrive till friday, and i just sold my TyTn. umm.. try putting the stylus at all four corners, and/or all four edges (middle of the edge) to see if it brings up a hidden menu. I know on win xp desktop version of the Remote Desktop has the menu auto hide at the middle top of the screen, may be the same thing?
sorry, since i don't have any device, i'm just shooting blanks, may not work
Hi buggybug0
thanks for Your efforts
I putted die stylus to all corners, middles, long, short, tapping, holding, double-tapping.... I can´t find any way to return from fullscreen to non-fullscreen.....:-(
I also know the behavior of the desktop-version of RDP, unfortunatly it is not the same way on mobile...
Maybe You will find a solution when You have Your own HD
Thanks
AsterX
buggybug0 said:
ahh.. well my HD won't arrive till friday, and i just sold my TyTn. umm.. try putting the stylus at all four corners, and/or all four edges (middle of the edge) to see if it brings up a hidden menu. I know on win xp desktop version of the Remote Desktop has the menu auto hide at the middle top of the screen, may be the same thing?
sorry, since i don't have any device, i'm just shooting blanks, may not work
Click to expand...
Click to collapse
AsterX said:
Hi buggybug0
thanks for Your efforts
I putted die stylus to all corners, middles, long, short, tapping, holding, double-tapping.... I can´t find any way to return from fullscreen to non-fullscreen.....:-(
I also know the behavior of the desktop-version of RDP, unfortunatly it is not the same way on mobile...
Maybe You will find a solution when You have Your own HD
Thanks
AsterX
Click to expand...
Click to collapse
I have the same problem, if you go full screen you're not getting out of full screen without killing the application! I think another issue with no hard soft keys.
I even dont get a connection
How did you set up your LAN? What Windows is on the PC you connect?
Did you configure something special on the PC to get it working?
Ascenca83 said:
I even dont get a connection
How did you set up your LAN? What Windows is on the PC you connect?
Did you configure something special on the PC to get it working?
Click to expand...
Click to collapse
Hi Ascenca83
the connection itself worked at once.
PC: WIN XP SP3, conntected to a LAN through cable, fixed ip-Adress, MY COMPUTER, PROPERTIES, REMOTE, [X] ALLOW USERS TO ESTABLISH A REMOTECONNECTION
Touch HD: Remote Desktop, IP-Adress, Connect..., User/Password, and it works.
But the problem, that I can´t get out of the fullscreen, and therefore can´t use the virtual keyboard, still exists....
hth
AsterX
Found the problem. Strangely the Touch HD had problem with my wpa-psk key. Had to set a new one and update the time setting of the router and then it worked.
With wpa2-psk I wasnt able to get a connection at all. Unsupported??
I tried RDC and got 'Internal Error'
Anyone know what this means?
Hmmm weird, to access the network I have to go into IE and type \\SERVER\ but despite the fact this opens the file manager it doesn't work directly in file manager!!!
If I browse to a folder on my server, I cannot then go back to \\SERVER\ afterwards without going via IE again!
What's with that!!!! Might expain why RDC doesn't work though.
Probably we need to contact HTC support and ask?
Who is the developer of this RDP mobile? Microsoft?
Or maybe just wait couple of months for Win Mo 6.5 Probably they fixed there.
Cant wait that looooooong
Is there really no solution for it to go fullscreen on this lovely portable screen?
Any alternative programs?
Ascenca
I think, there should be another solution for this problem than waiting for WIN6.5;-)?
The Touch HD is because of its large screen a great tool for a RemoteDektopClient. But without beeing able to work in fullscreen-mode, a great part of the worth of an bis screen is gone...
Does HTC have a good working support-hotline via email?
Thanks
AsterX
gogol said:
Probably we need to contact HTC support and ask?
Who is the developer of this RDP mobile? Microsoft?
Or maybe just wait couple of months for Win Mo 6.5 Probably they fixed there.
Click to expand...
Click to collapse
@buggybug0:
Did You get Your HTC Touch HD? How do You like it?
And could You also see the problem?
Thanks
AsterX
buggybug0 said:
ahh.. well my HD won't arrive till friday, and i just sold my TyTn. umm.. try putting the stylus at all four corners, and/or all four edges (middle of the edge) to see if it brings up a hidden menu. I know on win xp desktop version of the Remote Desktop has the menu auto hide at the middle top of the screen, may be the same thing?
sorry, since i don't have any device, i'm just shooting blanks, may not work
Click to expand...
Click to collapse
AsterX said:
@buggybug0:
Did You get Your HTC Touch HD? How do You like it?
And could You also see the problem?
Thanks
AsterX
Click to expand...
Click to collapse
AsterX, don't worry, i still remember you. infact, the first thing i tried when i got my phone was RemoteDesktop. Now I see your problem, i couldn't find a solution.. yet. for the sake of other the issue is this:
in mobile remote desktop client, when you log on using non-full screen, then go to full screen with connection still being alive, you cannot get out of full screen. of course you can also choose to go into full screen as the client connects, but the problem still exists -> if you are in full screen now, you can't get out of it.
this problem never came to mind because my previous PPC had a keyboard. i still be poking around on this issue.
Hi buggybug0
yes, You exactly described the problem.
Additionally, when you are in fullscreen-mode, you cant reach the virtual keyboard
So you can't type anything, if You are in fullscreen-mode..., and you can't leave the fullscreen-mode without cutting the connection
Thanks
AsterX
buggybug0 said:
AsterX, don't worry, i still remember you. infact, the first thing i tried when i got my phone was RemoteDesktop. Now I see your problem, i couldn't find a solution.. yet. for the sake of other the issue is this:
in mobile remote desktop client, when you log on using non-full screen, then go to full screen with connection still being alive, you cannot get out of full screen. of course you can also choose to go into full screen as the client connects, but the problem still exists -> if you are in full screen now, you can't get out of it.
this problem never came to mind because my previous PPC had a keyboard. i still be poking around on this issue.
Click to expand...
Click to collapse
Hey guys,
I don't know if this has been tried or thought of. My mouse just died, and am waiting for it to charge, and I thought, hmm, it would be great if I could use my HD2 touch screen as a giant trackpad for my PC. The idea would be that you connect your HD2 to the computer via bluetooth or usb, and then launch this trackpad app which would really just give you a screen like what I have attached and then you have a trackpad! I know the app will be pretty useless for most cases, but it could be a cool replacement for some people.
Just a thought...
program called gremote lets you do just that . ....
watcher64 said:
program called gremote lets you do just that . ....
Click to expand...
Click to collapse
Awesome! Thanks for the info
No problem, Gremote , there is a older free version, works over wifi, and bluetooth, very nice fun to play with ...
It really does work nice ...
Be sure to google it and find the home page, there are some cabs floating around but they only have the phone part not the part that needs to run on the PC ...
wifii?? are u sure?,................i thought it only works by bluetooth
pakure said:
wifii?? are u sure?,................i thought it only works by bluetooth
Click to expand...
Click to collapse
Nope I have the older free version and it uses wifi.. You have to install a client on the PC.