when the wm side freezes is there a way to soft reset.i got x7510 aswell on that theres a soft reset button at the back.is there a trick with the shift
u can use shagcontrol (comm mgr button upper resolution button)
in snapvue tab, there are few options or u can use cmonex ECShift.exe -reset.
thanks
thanks found it in comm manager its in advance setting was reading the manual yesturday
Related
Can some help me with this for some strange reason when I press my Comm Manager button on my Wizard the app doesn't open
does anyone know how to remap this button as I use this feature a lot I can't find the way to remap this button anywhere, its not listed in the button menu
I hope someone can help me as I don't want to hard reset my phone
FOZZER said:
Can some help me with this for some strange reason when I press my Comm Manager button on my Wizard the app doesn't open
does anyone know how to remap this button as I use this feature a lot I can't find the way to remap this button anywhere, its not listed in the button menu
I hope someone can help me as I don't want to hard reset my phone
Click to expand...
Click to collapse
Under settings buttons... always worth switching off and restarting then if that does not hard reset.
Terran
same problem here........................probably you installed another key mapper too? (AEBPlus).
It seems a hard reset is the only solution, or somebody could post the registry entry where this key map is defined!?
TIA
Yep put AEBPlus in didnt like so i uninstalled it now no comm manager Ahhh!!!!
After uninstalling AEBPlus, you keep stuck with only "4 buttons", at least in the System Settings. Happily everything keeps working...............expect the CommMgr button.
Either somebody posts the correct reg-entries for this key, or you have to do a hard reset.
I think it might be solved if you place the original files back into: \Windows\AppButtons
Maybe somebody can post a RAR file of that folder?
Second thing, I found the keys in the register. They can be found here:
Mobile device\HEKY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys
You will see that the 4 keys are there left by AEBPlus. The missing keys should be here when you have a working Wizard
Hope someone can post the keys and values aswell?
I had the same problem. The registry values in this post will restore function:
http://forum.xda-developers.com/viewtopic.php?t=33795&highlight=hw+keys+remapping
Christian
TnX!! The best forum there is! 8)
Ok now how the hell do i add the reg value for the com manager I ve got reg edit
Please instructions for idiots
Ok now how the hell do i add the reg value for the com manager I ve got reg edit
Please instructions for idiots
You have to add a string to the register. Then give that string the right name and value
AEBPlus was completely rewritten recently. New version will not harm any application buttons ever, compatible with almost any WM 2003/2003SE/2005 device and has a lot of new features
http://ae.inc.ru/aebplus
Hi
on my dual on the home screen the soft key on the bottom right of the touch screen used to be contacts. but now it has turned to 'go to...' when i click this i get an error message! how can i change the button
get the freeware tool Keyswop
you can define there, what the two softkeys do.
dont forget to do a softreset after you safed your new settings.
thanks for the help
OK! I was trying to get TF3D 0.6.7 to work and it was giving me an error. There are 2 fixes posted by the author. I tried the first one with no luck, the second one worked great!
The first one is to go to HKLM/Driver/Touchpanel and make a new Dword.
For reasons I cannot explain I did not think to back up my registry! Now, the touch screen won't work except for the task manager arrow. Nothing else no matter how hard I push or with what.
Anyone have any ideas on how to fix it or does can someone possibly make an exacutable registry key I can launch or install some how? I thought you could use PHM from the desktop as well. Any registry editors that will work through active sync on the PC? If so, what is the value supposed to be and what kind of key is it supposed to be? Thanks in advance.
soft reset?
have you tried a soft reset?
If everything else fail, you should maybe just re-flash your phone.
Before flashing try to hard reset.
Press and hold VOL.DOWN Button & ENTER Button
And while holding press the soft reset button (under the stylus)
When a message appears on your screen u can release the
Volume down button and enter button.
Use "Mobile Registry Editor" to change the setting back while the device is recognized by ActiveSync. (You can hit Cancel on the ActiveSync pops and it will let you use the device in Guest mode)
You can also use some remote control utility like MyMobiler or EveryWAN to use the device through the computer.
MyMobiler should definitely help. Try it out..
Regards,
Carty..
Is there an app to soft reset, without removing battery cover?
I tried shutdown, pocket tools, pocket power manager, but after installation, none will actually load up...
is this a diamond touch flo issue or what?
any help would be appreciated
wisbar
wisbar advance 3....its not free but worth it, try the trial. make a shortcut to reset option on the programs tab and u are goo to go!
try this, http://forum.xda-developers.com/attachment.php?attachmentid=104717&d=1218160467
Quickmenu does and it's free. It has option to hold start menu down to soft reset.
I use psShutXP to reset my diamond. With softkeychanger i put it on the right soft key on the home screen. If you want to try it, i attached the program and a vga-skin, which is important for the right function. You can try both integrated cabss...i use the x-scale version. Please copy the two gif files after the installation into the folderr psShutXp under Programs.
There is also way to assign psShutXP to power button
http://soft.photoracer.net/docs/wktask_en.html
markdb77 said:
Is there an app to soft reset, without removing battery cover?
Click to expand...
Click to collapse
Yes, there's the little known app called "push the red button in the stylus slot" app, no battery cover removal required.
TouchOff v0.3.0 by CCa
Related thread: Power off - Standby - Soft reset with small app
Neo XL said:
I use psShutXP to reset my diamond. With softkeychanger i put it on the right soft key on the home screen. If you want to try it, i attached the program and a vga-skin, which is important for the right function. You can try both integrated cabss...i use the x-scale version. Please copy the two gif files after the installation into the folderr psShutXp under Programs.
Click to expand...
Click to collapse
Ditto, I do the same. psShutXP not only soft resets but sleeps the Diamond and also turns off screen.
Plus you can make your own skins.
Greetings.
Install cab, soft-reset, keep pressed power off button...
Good luck and Have Fun.
I've been using A-A Reset Manager that came with Duttys ROM.
I dont know if its available as a cab but it very useful.
Medulla said:
Yes, there's the little known app called "push the red button in the stylus slot" app, no battery cover removal required.
Click to expand...
Click to collapse
Couldn't agree more. If all you want is the ability to soft reset without removing battery cover why waste precious memory installing an app when there is a red button in the stylus slot to do this?
I do not see a RED button in the stylus slot. Perhaps you have the non-SPRINT Diamond.
Thanks to all for the apps !!
I have this annoying problem. I dunno know what applications has blocked my right hard button to be assigned to any programs.
After I reset my PDA, the right button back to the default assigned program.
I wonder to know where is the right button setting is placed in the registry so i just delete it...
Sorry bad english
p.s:
- Not Today Button
- suspected Application: SKTools
-
mymailx said:
I have this annoying problem. I dunno know what applications has blocked my right hard button to be assigned to any programs.
After I reset my PDA, the right button back to the default assigned program.
I wonder to know where is the right button setting is placed in the registry so i just delete it...
Sorry bad english
p.s:
- Not Today Button
- suspected Application: SKTools
-
Click to expand...
Click to collapse
after using Sk tools... Auto CLear. i can't use Start Button =.= -> delete SK =)