[SSPL] {How-To}{Anleitung}{Multi-Lang. WWE/Deutsch} Use SSPL for flashing cooked ROMs - HD2 Windows Mobile 6.5 ROM Development

<--- Only SSPL for NOW. HSPL will come later. Waiting for cmonex and her nice work! --->​
About this Topic
This Thread is a How-To and a place for questions and answers for the HSPL for the HTC HD2. You can find here a How-To in German and in Englisch. ​
< Index >
1. How-To and the most important Informatoins in English language
Guarantee and chaffing​What is SPL and why do i need ​- SSPL​- HSPL​Preparing​- The PC​- The device​GoldCard - NEW and Important!​Let´s begin!​Known Problems​
2. Anleitung und die wichtigsten Informationen in deutscher Sprache
3. < Reserved >
4. General HTC HD2 information that are thematically relevant
5. Allgemeine HTC HD2 Informationen, die thematisch relevant sind
6. How-To Video (external)
<- Guarantee and chaffing ->​
1. Neither xda-developer, nor the hacker (who made HardSPL possible) nor ME are liable for any demage on your device.
2. By using HSPL you can loose your guarantee. Ask your mobile-operator for more informations.
3. You use HSPL on your own risk. When you do a mistake, it’s all your own fault. The hacker and developer works hard to make everyting working. But the world is not perfect.
<--- What is SPL and why do i need it? --->​
The SPL is mainly a bootloader which allows a ROM to be flashed onto your device. As has been uncovered recently (or known to the more astute longer) the SPL does more than just load and boot the ROM it sets various flags which can control the operation of the OS on the device. It also controls some operations between the OS and the device's hardware. SPLs come paired with shipped (or leaked) official ROMs and are meant to match the ROMs operation. Therefore, with each new ROM release there is likely to be a new SPL.
There are two versions of SPL:
HardSPL & SoftSPL
SoftSPL is a patched SPL that will temporary unlock your CID (until reboot). Why Temporary? Because of your warranty, since there is no CID block written, your warranty will not be voided. Also with this tool it is not necesarry to have a permanently unlocked CID. And last it's safe. It doesn't flash a CID block or IPL/SPL to your device on it's own, but you should choose the ROM you want to flash wisely.
For more informations read the xda-wiki. Use it!
HSPL is a custom G4 SPL patched by Olipro which let your device think it has SuperCID (aka CID unlocked). If you use HardSPL, you don't need a separate loader in the future, just use the RUU provided in the ROM package.
YOu need more informations? Use the xda-wiki! It´s realy useful! Realy!
<-- Preparing-->​
The PC
Make sure you use Win7 or WinXP. In past the experience with WinXP was the best while flashing a device. Flashing with WinVista is realy risky.
Close all not needed running processes on the PC like MSN, ICQ, Donloads/Uploads, etc.
Very important is to shutdown your firewall and your anti-virus software. Secialy G-Data makes problems while flashing.
The device
1. Make sure the Battery is over 50% charged. 100% is best.
2. Backup your data. Use SPB Backup or any other Backup-Tools. I recommend SPB Backup, cause it is 100% compatible with WinMo 6.5
3. Make sure you have a Gold Card ("]Link)
Important: Untill there is no HSPL yet, you will need a GoldCard!
How to get a GoldCard?
<--- Let´s begin! --->​
1. Download SSPL: Download-Thread Direkt-Link
2. Extract the File to a new folder
3. Connect the device with the PC via Active Sync/Windows Mobile Device Center
4. Place the ROM you want flash into the same folder. Make sure the ROM is a ".NBH" file and not an ".EXE" file
5. Press "SSPL_RUU.exe" twice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Read, select the checkbox, press NEXT
7. Read, select the checkbox, press NEXT
8. Wait untill the device-informations are vertifyted
9. Press "Uptate"
10. Read, press NEXT
11. Flashing
12. Done!
<--- How to flash an other ROM and the Invalid ID problem --->​
INVALID VENDER ID
You have used SSPL for flashing a cooked ROM. But you are not happy with this ROM and want flash an other one. Hold on! First you need a GoldCard!
You need to flash a original stocked ROM in your fav. langauge by using a GoldCard. How you make a GoldCard you can read HERE (Link)!
After you flashed your device back to an original ROM you can use SSPL again and flash an other ROM on your HD2.
Good luck!
<---- Known Problems ----->​
Error 260/Connection Failed
1: Connected device via active sync, established connection to WMDC
2: Opened Device Manager, found the HTC HD2 item and removed the driver ALSO DELETING IT FROM THE SYSTEM
3: Reboot
4: Connected device via active sync, allow the driver to DOWNLOAD from M$ and fully install
5: Disconnect the HD2 from USB and bring into bootloader
6: Connect the device in Bootloader to a DIFFERENT USB socket and allow driver to load and "Serial" will turn to "USB"
7: LEAVE THE DEVICE IN BOOTLOADER
8: Run "SSPL_RUU.exe" as Administrator and flash from Bootloader
I think Win7 x64 has a problem installing the Active Sync Driver and the HTC Sync Driver to the same USB Socket. I tryed using the USB socket i established the WMDC connection with and it would not install the second driver!
credits @ MysticGenius
Click to expand...
Click to collapse

FAQ
<---- Über diesen Bereich ----> ​
Dies ist eine Anleitung und ein Sammel-Bereich für Fragen und Antworten rund um HSPL für den HTC HD2.
1. How-To and the most important Informatoins in English language
2. Anleitung und die wichtigsten Informationen in deutscher Sprache
Gewährleistung und Hafftung​Einführung​- SoftSPL​- HardSPL​Vorbereitungen treffen​Am PC​Am Gerät​GoldCard - Neu und sehr wichtig​Jetzt geht´s los​FAQ - Häufig gestellte Fragen​BUGs - Bekannte Fehler und Lösungen​
3. < Reserved >
4. General HTC HD2 information that are thematically relevant
5. Allgemeine HTC HD2 Informationen, die thematisch relevant sind
<--- Gewährleistung und Hafftung --->​
1. Weder xda-developer, noch die Hacker (die das HardSPL ermöglicht haben), noch ICH haftet für Schäden an eurem Gerät, die durch das einspielen von HardSPL entstehen könnten.
2. Mit dem einspielen des HardSPL könntet ihr eure Garantie verlieren. Wenn euch diese wichtig ist, fragt beim Provider (falls ihr das Gerät dort gekauft habt) nach. Solltet ihr das Gerät im freien Handel (z.b. beim MediaMarkt/Statur/co.) erworben haben, dann bitte dort nachfragen
3. Ihr benützt das HardSPL selber. Euch zwingt niemand dazu. Falls ertwas schief läuft, seit ihr selber schuld. Die Hacker und Entwickler auf diesem Bord (Forum) geben ihr bestes, damit alles bestens funktioniert - aber die Welt ist eben nicht perfekt.
<--- Einführung --->​
Es gibt zwei Arten von SPL (zumindest für den HTC HD2)
HardSPL & SoftSPL
SoftSPL ist ein Patch für das originale SPL. Es befreit eurer CID von den Fesseln des OEM. Doch leider ist das nur temporär. Hacker und Entwickler benutzen SoftSPL zum Prüfen des finalen Hacks - also HardSPL. Die CID vom HD2 wird bei einem SoftSPL nicht neu geflasht. SoftSPL (kurz SSPL) greift nur während des Boot-Vorgangs.
HardSPL ist der Schlüssel zur Freiheit. Beim Einspielen des HardSPL (kurz HSPL) wird eure CID neu geflasht. Danach "denkt" das Gerät es hätte eine SuperCID und erlaubt euch das einspielen jedes beliebigen ROMs. Ihr müsst euch danach nicht mehr um euere SPL oder CID kümmern. /
<-- Vorbereitungen treffen-->​
Am PC
Ihr solltet einen Windows 7 oder Windows XP Rechter haben. Wenn bei euch Vista läuft, ist es nur bedingt zu empfehlen, damit das HardSPL einzuspielen. Mit XP seit ihr auf der sicheren Seite.
Beendet alle unnötigen Prozesse wie IM-Messenger, Spiele, Downloads, etc. Alles was Rechenleistung zieht und den PC zum abstürzen bringen könnte. Ihr solltet auch die Firewall/Internet-Security abschalten. In der Vergangenheit haben Programme wie G-Data und co. Probleme bereitet.
...
Am Gerät
1. Stellt sicher, dass der Akku über 50% geladen ist. Am Besten sind natürlich 100% Akkuladung.
2. Macht sicherheitshalber ein Backup eurer Daten. Benutzt SPB Backup (oder eine andere Software eures Vertrauens). Ich empfehle SPB Backup(es gibt auch eine 15-Tägige Testversion), weil es nativ zu Windws Mobile 6.5 kompatibel ist .
3. Stellt sicher, dass ihr eine GoldCard für den HD HD2 erstellt habt! (Link)
<--- Jetzt geht´s los --->​
1. Ladet euch das das SSPL HIER herunter (Direkter Download)
2. Entpackt den Ordner auf "C/:" - aber da, wo ihr ihn auch wiederfindet.
3. Schließt das Gerät an den PC an und verbindet mit Active Sync/Windows Mobile Device Center
4. Platziert das gewünschte ROM in Form einer ".NBH" Datei in den selben Ordner. Stellt sicher, dass es sich um eine ".NBH" Datei handelt und nciht um eine ".EXE" Datei!
5. Drückt zwei Mal "SSPL_RUU.exe"
5. Lesen, Kästchen auswählen, NEXT drücken
6. Lesen, Kästchen auswählen, NEXT drücken
7. Warte, bis alle nötigen Informationen zu dem Gerät gesammelt wruden
8. Drücke auf "Uptate"
9. Lesen, danach NEXT drücken
10. Das Flashen kann beginnen
11. Fertig!
<- FAQ - Häufig gestellte Fragen ->​
Was heißt ROM und was hat es mit dem Kochen zu tun?
ROM steht für "Read Only Memory" und bezeichnet das Windwos Mobile, das auf euren HTC HD2 gehört. Damit ein "gekochtes" - also ein modifiziertes, verbessertes oder einfach nur neueres - System auf dem HTC HD2 benutzt werden kann, muss das Gerät zu erst mit HSPL bearbeitet werden. Ein ROM kommt meistens als eine ".nbh" Datei und eine ".exe" Datei. Damit das ROM auf den HD2 kommt, muss das Gerät mit dem PC verbunden werden. Exe zwei mal ankicken und den Anweisungen auf dem Bildschirm folgen
Was ist SPL und wofür brauche ich das?
SPL ist grob bezeichnet der Bootloader eures HTC HD2. Die Abkürzung "SPL" steht für "Secondary Program Loader". Dieses SPL verwaltet den Boot-Prozess von Windows Mobile.
Wenn ihr ein "gekochtes" ROM (Firmware) auf euren HD2 einspielen wollt, muss dieses SPL modifiziert werden. Sonst kann das gekochte Windows Mobile nicht geladen werden.
Was ist HardSPL? Was ist SoftSPL? Und wo ist der Unterschied?
SoftSPL ist ein Patch für das originale SPL. Es befreit eurer CID von den Fesseln des OEM. Doch leider ist das nur temporär. Hacker und Entwickler benutzen SoftSPL zum Prüfen des finalen Hacks - also HardSPL. Die CID vom HD2 wird bei einem SoftSPL nicht neu geflasht. SoftSPL (kurz SSPL) greift nur während des Boot-Vorgangs.
Für weitere Infos bitte die xda-wiki lesen > Dafür ist sie ja da!
HardSPL ist der Schlüssel zur Freiheit. Beim Einspielen des HardSPL (kurz HSPL) wird eure CID neu geflasht. Danach "denkt" das Gerät es hätte eine SuperCID und erlaubt euch das einspielen jedes beliebigen ROMs. Ihr müsst euch danach nicht mehr um euere SPL oder CID kümmern.
Noch mehr Informationen erwünscht? Dann bitte die xda-wiki lesen > Für irgend etwas muss sie ja gut sein!
<- BUGs - Bekannte Fehler und Lösungen ->​
Error 260/Connection Failed
Lösung: Verbindet euren HTC HD2 mit ActiveSync bzw. dem Windows Mobile Device Center (WinVista und Win7). Wartet bis das Gerät eingerichtet ist. Wenn fehlende Treiber installiert werden müssen, wartet, bis der PC diese selber Installiert hat. Wenn die Verbindung steht und auch nicht´s mehr synchronisiert wird, versucht den Flash-Vorgang erneut.
INVALID VENDER ID
Lösung: Du habt ein ROM erfolgreich geflasht, bist mit diesem jedoch nicht zufrieden? Halt! Warte, bevor du ein anderes ROM versuchst zu flashen! Nur mit einer GoldCard kann ein anderes ROM geflasht werden. Gehe so vor:
1. GoldCard erstellen
2. HD2 mit der GoldCard flashen
3. SSPL benutzen, um ein anderes ROM auf den HD2 zu flashen.
4. Wenn du das ROM erneut wechseln willst, wiederhole Punkt 2 und 3.

BUGs und Fehler
<- Reserved ->​

First Help
<- General HTC HD2 information that are thematically relevant ->​
Hard- and Soft-Reset
How to Hard/Softreset your HTC HD2 - Source (please Donate to smaberg)
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it. You will then see a message on the screen telling you this will erase xxxxxxxx......
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
Where can I find cooked ROMs for the HTC HD2? - Source (please Donate to jagnet)
Ive added a new section to the HTC Leo Wiki for listing all your roms and download links , info etc etc. Will be a lot easier keeping them all listed in one place than over 100s of threads.
HTC HD2 ROM-List
Click to expand...
Click to collapse
I have a ".nbh" file. What can i do with that file? Source + Download (please Donate to udK)
Drop the .nbh file of your choice in the same folder as CustomRUU and start flashing.
Click to expand...
Click to collapse
What SPL-Version is on my HTC HD2?

Das kleine Lexika
<- Allgemeine HTC HD2 Informationen, die thematisch relevant sind ->​
Für jedes Gerät das selbe. Und trotzdem wird immer wieder gefragt, wie man das eine oder andere macht. Hier eine kleine Liste der wichtigsten Sachen auf einen Blick zusammen gefasst.
Hard- und Soft-Reset
Anleitung auf Englisch - Quelle
Softreset - Hier gibt es zwei Möglichkeiten:
Akku-Abdeckung abmachen und Akku raus nehmen
Akku-Abdeckung abmachen und den roten Punkt links unten mit einem nicht zu breiten Gegenstand (z.b. Büroklammer) drücken.
Hardreset - auch hier wieder zwei Möglichkeiten:
Gerät ist eingeschaltet->Start->Einstellungen->System->Speicher löschen
Gerät lässt sich nicht mehr einschalten oder das System startet nicht ->Ein/Aus/Auflegen Knopf drücken und halten, bis das Gerät ausgeht (wirklich aus, und nicht nur der Bildschirm).->Ein/Aus/Auflegen Knopf loslassen-> Lautstärke-Regelung auf der linken Seite des Gerätes drücken und gedrückt halten. -> Kurz auf den Ein/Aus/Auflegen Knopf drücken aber nicht halten.->Ein Bildschirm mit drei Farben erscheint, dann eine Meldung erscheint->Lautstärke Knöpfe loslassen->Den oberen Lautsträke-Knopf kurz drücken.
SPL-Version prüfen
Gerät ausschalten, indem die "Aus/Auflgen-Taste" im eingeschalteten Zustand länger gedrückt wird->In dem nun offenen Fenster "Gerät ausschalten" wählen->Lautstärke nach unten drücken und halten->"Aus/Auflegen-Taste" kurz drücken und Lautstärke nach unten weiter halten bis der gewünschte Bildschirm erscheint.
Gekochte und offizielle ROMs für den HTC HD2 finden
Quelle
Ihr seit schon mal im richtigen Forum. Haltet ausschau nach Topics mit "[ROM]" in der Überschrifft. In diesen Topics preisen die Entwickler ihre eigenen gekochten ROMs an.
Am besten ihr wirft einen Blick in das xda-wiki. HIER findet ihr eine ordendlich sortierte (und stets aktuelle) Liste!
Was mache ich mit einer ".nbh" Datei?
Quelle + Download
Ihr habt ein ROM vor euch, dass auf den HD2 muss/soll. Dazu braucht ihr das CustomRUU. Ihr findet es HIER. Platziert nun die ".exe" Datei in den selben Ordner wie die ".nbh" Datei. Startet nun die ".exe" und folgt den Anweisungen, die nun auf dem Bildschirm erscheinen.

es gibt immer wieder wichtigtuer die das rad neu erfinden müssen...
sry for my german

comingloud said:
es gibt immer wieder wichtigtuer die das rad neu erfinden müssen...
sry for my german
Click to expand...
Click to collapse
Ich werde das mal als ein "Danke schön" werten.
Natürlich werde ich das Howto mit Inhalt füllen. Bisschen abwarten.

Ich finds klasse - n1

comingloud said:
es gibt immer wieder wichtigtuer die das rad neu erfinden müssen...
sry for my german
Click to expand...
Click to collapse
Ich finds klasse - n1
und es wird immer Wichtigtuer geben - die sinnloses von sich geben

Total sinnlos, solange es noch kein HSPL gibt.
Der Threadtitel ist verwirrend (wenigstens ein "baldige" hätte man erwähnen können), als gäbe es schon ein HSPL.
Eine Anleitung ist schön und gut, wenn es einen Grund dafür gibt.
Den Thread finde ich deshalb ebenfalls (noch) total überflüssig. Man, man.
Und dann 4 freie Posts ohne Thema für nur eine Anleitung. Sorry, man kann sich echt wichtiger machen als man ist.
EDIT: Besser so.

also ich finde es gut dass jemand so ein tut schreibt für die die mit hardspl noch keine erfahrung haben.
wer den thread überflüssig/sinnlos/dumm findet überliest ihn halt ... oder schreibt ihr bei allen von den unnötigen zig posts hier im Forum dass sie unnötig sind ??
.. also - nix drauf geben und fleißig andere user an wissen teilhaben lassen - weiter so !

Please use English! It's a WWE forum!

sorry, wrong post

J'an ai marre, we speak english here 不是吗?

I am sorry but I dont see the point why there should not be a manual for each language.
Remember that there are users out who dont know english that good. (Me included)
Someone started now a german one. Very nice! Keep going on!
For me its fine to see also other threads handling the same topic in italien, chinese, korean or whatever.
The infos in such theards are normally taken from some english posts. So dont be afraid.. You want miss anything!

thommic said:
I am sorry but I dont see the point why there should not be a manual for each language.
Remember that there are users out who dont know english that good. (Me included)
Someone started now a german one. Very nice! Keep going on!
For me its fine to see also other threads handling the same topic in italien, chinese, korean or whatever.
The infos in such theards are normally taken from some english posts. So dont be afraid.. You want miss anything!
Click to expand...
Click to collapse
That is true, there are many members from various parts of the world, but they are commuting on a WWE forum! Hence they should be using WWE.

comingloud said:
es gibt immer wieder wichtigtuer die das rad neu erfinden müssen...
sry for my german
Click to expand...
Click to collapse
Sure, but there also always people who are new, forgot such basics, or don't remember some details. It's a good explanation of details and summary.

i can not understand anything after reading the thread
看完帖子啥都没看懂,TNND

For this to be a sticky this needs to be as readable for every user as possible. Since this is mainly focused on German users and the double language makes it a bit hard to find where to read this won't likely be stuck. That doesn't mean that the work isn't appreciated.
12

Look, I understand that your native language is German and maybe you don't know that well English language to translate the first post entirely..
BUT!
As tnyynt pointed out, this is a WWE forum. Writing in German not only lets you communicate your very interesting information with a very restricted group of people (just think about it.. worldwide, are there more ppl who can understand English or German?), but also it's lack of respect since you are writing something that very few people can understand, leaving the majority of them like "what's that ?!" and forcing them to find alternative ways (online translators and such) other than waiting for your translation..
Finally, I suppose you are writing about HSPL, I wasn't even able to understand if you managed or not to create a patch for it.. isn't that the opposite of divulging information on this forum? Make others know more, I mean..?

Related

need TC500 (t-one) rom

Hello, i need the TC500 germany t-one (telekom) rom, have anyone a rom dump ore completet rom?
Regards SU
I have an TC 500, but I don´t know how I can help you.
TC 500 Rom
I need this ROM too, and the only thing you can do is execute this program.
You have to extract this folder with autorun.exe in it on to a formattet 128MB SD-Card (all other data will be destroyed).
If you insert this card in normal mode into the slot, there will be automatic start an image-program and all rom-data will be saved on the card.
You can see line on the bottom of display and when the line is full - it`s ready.
I hope i could help you - sorry about my bad english - i`m a german
Hi, wen du das Romdump hast, kannst aber nix damit anfangen, wie willst das dann zurückspielen?
MFG Phil
TC 500 Rom
Ich weiss noch nicht - ich bekomme demnächst aber ein neues TC 500 im Originalzustand (hoffe ich)
Wenn ich das ROM extrahieren kann, melde ich mich - vielleicht kann man es in der ROM-kitchen software verwenden - ich kenne die DATEI-Endung noch nicht, da ich mein TC 500 bereits auf WM6 geflasht habe und eine 128MB Karte jetzt nicht meht ausreicht...
Ich habe allerdings mit SBP-Backup eine Sicherung angelegt, die aber nur auf dem ORIGINAL-ROM zu laufen scheint.
Unabhängig davon ziehe ich meinen Hut vor den Tüftlern, die diese Images zum Laufen bringen.., ich habe im Moment ein WWE-Image mit TouchFLO auf dem TC 500 Laufen und abgesehen vom hohen Energieverbrauch laufen sie sehr stabil (nach diversen Patchen der Registry für WLAN und Blauzahn), aber das ist ja der Sinn von Beta-Versionen...
Bitte weiter so !!!
انا لغتي عربي وفرنسي وانكليزي وروسي و مو فهمان شي بس الظاهر الحكي مهم
i WISH i CAN HELP
Hello, i have the TC500 too....
I have the hole Extend Rom extracted and copied to my Computer!
If it helps i will upload it to rapidshare or xda Ftp !!
This is the content of extend Rom from TC500 org.
AutoRun.exe
AutoRun.exe.0407.mui
Config.txt
cusTSK.exe
MP-Shortcut-MMS1-JAVA5XX-VOICE-060109.CAB
MP_CVSDcpl_20060220.cab
MP_DRM_Prophet_TCOM_GER_060908.CAB
MP_IMGSave_GER_060329.CAB
MP_MMS3.0_TCOM_Prophet_060818.CAB
MP_Ringtone_GER_050728.CAB
MP_T-Online_DataSync_PocketPC.CAB
MP_T-Online_DataSync_PocketPC_button.CAB
MP_VOIP_config_0920.CAB
MP_VoIP_enable_0620_signed.CAB
OemExtDll.dll
PT_VOIP_25625_voipbar.CAB
P_BrowserSetting_TCOM_DE.cab
P_Device_name.CAB
P_Email.cab
P_Generic_Conn_Settings.CAB
P_Generic_Conn_Setting_Long_tones.CAB
P_Generic_UI_RingTone.CAB
P_Generic_UI_Today.CAB
P_Other(Conn Setting)_off_device_backlight.CAB
P_Others(UXC)_Comm_Manager.CAB
P_Others(UXC)_Disable_sound_Wireless.CAB
P_Others(UXC)_SPEEDDIAL.CAB
P_Others(UXC)_SPEEDDIAL2.CAB
P_Others_UXC.CAB
P_Other_Conn_Settings.CAB
P_pIEsetting_Favorites_TOne_DE.CAB
P_TCOM_WiFi_SSID.CAB
P_TOne-TSK.CAB
P_Version.CAB
VoIPAudio.CAB
WifiTempOFF.exe
WifiTempON.exe
Hi, i installed the ext.rom on a clean wm5. But it freezes after reboot.
I think we need a complete rom too.

Bitte um hilfe Artemis beim Flaschen Hängengeblieben

Habe versucht von WM 6,1 english auf WM 6,1 Deutch zu flaschen
mit den Image Touch IT German Final habe
Habe cert_spcs .Enablerapi und ASerg Policies instaliert dann softreset gemacht
und geflascht blieb mitten im flasch hängen
jetz bootet er nicht mehr kommt nur bild und die bezeichnung
IPL 3.15.0001
SPL 1.11.0000
GSM 03.07.90
Bin für jede hilfe dankbar
PS hate das Problem schon einmal bin irgenwie in den USB modus gekommen und konte Flaschen aber jetzt bekomme ich das nicht mehr hin
chulis1 said:
Habe versucht von WM 6,1 english auf WM 6,1 Deutch zu flaschen
mit den Image Touch IT German Final habe
Habe cert_spcs .Enablerapi und ASerg Policies instaliert dann softreset gemacht
und geflascht blieb mitten im flasch hängen
jetz bootet er nicht mehr kommt nur bild und die bezeichnung
IPL 3.15.0001
SPL 1.11.0000
GSM 03.07.90
Bin für jede hilfe dankbar
PS hate das Problem schon einmal bin irgenwie in den USB modus gekommen und konte Flaschen aber jetzt bekomme ich das nicht mehr hin
Click to expand...
Click to collapse
Original IMAGE vor dem Flaschen war Artemis Vanilla 4.01
Wiki ?
You'll find the instructions to enter bootloader mode in the wikipages
http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
wenn die instrucktionen klappen sollten wäre es nett wende mir eine nachricht zukommen lassen könnts
thx
srox

[release] WM6.5.1 beta Build 23052 (english/german)

Windows Mobile 6.5.1 beta Build 23052 (Deutsch/English)
Version 1.0
Deutsch:
Download
Die neuste beta vom WM 6.5.1 für den Blue Angle. Alle Anwendungen funktionieren einwandfrei,
nur die Menüs etc. haben noch nicht die entsprechende Auflösung, wird aber von m$ bei jedem Build verbessert/beseitigt.
English:
Download
The latest beta of the WM 6.5.1 for the Blue Angle. All the applications are working well,
there are just little problems concerning the resolution of the menu. M$ is already working on
that problem and we expect improvments within every neu build.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
echt super arbeit! werde es gleich heut abend noch drauf machen und dir berichten ob es irgendwelche probleme gibt!
achja die dlinks fehlen
letzter stand:
nutze windows 7 bzw vista und habe leider keinen xp rechner mehr!
aber ich bekomme nur den fehler "error 150: ROM upgrade utiliy error"
Swing* said:
echt super arbeit! werde es gleich heut abend noch drauf machen und dir berichten ob es irgendwelche probleme gibt!
achja die dlinks fehlen
letzter stand:
nutze windows 7 bzw vista und habe leider keinen xp rechner mehr!
aber ich bekomme nur den fehler "error 150: ROM upgrade utiliy error"
Click to expand...
Click to collapse
Sieh mal hier:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista
das hatte ich gestern schon versucht aber ging irgendwie nicht! aber ich mache es gerade auf dem windows 7 rechner mit virtual pc und ich bin zuversichtlich! meld mich sobald es geht!
update:
mit windows 7 virtual pc xp mode geht das ganze ohne probs und ich werde in 10 min schlauer sein wie das neue rom arbeitet!
update:
es wundert mich das ich der 1. bin der das testet
ok also,
erstma geht das upgrade ohne probleme und auch der start vom system geht sehr schnell! die neue taskleiste finde ich sehr schick,allerdings weiss ich jetzt was er meint mit der auflösung. es ist ausserdem bisse irre führend, das wenn man ein prog öffnet und in der neuen leiste mit dem "X" schliesst, es nicht als task geschlossen wird sondern weiter im speicher ist. es sind keine spiele installiert und auch die anderen addons aus seinem erstem rom sind nicht dabei, was sicherlich mit dem beta status dieses release zu erklären ist.
es gibt wenige unterordner sodass alle programme sofort im startmenü liegen.werde jetzt mal bisse damit rum spielen aber bisher bin ich sehr überzeugt und würde mich freuen wenn du die extrom noch mitlieferst.
und wegen der sprache: ich habe noch nichts gefunden was nicht in deutsch ist bzw, begriffe wie systeme oder ähnliches auch keine übersetzung brauchen!
Fazit: ein super release was noch ein wenig feinschlif braucht und dann das wohl beste rom seit langem wird
Swing* said:
das hatte ich gestern schon versucht aber ging irgendwie nicht! aber ich mache es gerade auf dem windows 7 rechner mit virtual pc und ich bin zuversichtlich! meld mich sobald es geht!
update:
mit windows 7 virtual pc xp mode geht das ganze ohne probs und ich werde in 10 min schlauer sein wie das neue rom arbeitet!
update:
es wundert mich das ich der 1. bin der das testet
ok also,
erstma geht das upgrade ohne probleme und auch der start vom system geht sehr schnell! die neue taskleiste finde ich sehr schick,allerdings weiss ich jetzt was er meint mit der auflösung. es ist ausserdem bisse irre führend, das wenn man ein prog öffnet und in der neuen leiste mit dem "X" schliesst, es nicht als task geschlossen wird sondern weiter im speicher ist. es sind keine spiele installiert und auch die anderen addons aus seinem erstem rom sind nicht dabei, was sicherlich mit dem beta status dieses release zu erklären ist.
es gibt wenige unterordner sodass alle programme sofort im startmenü liegen.werde jetzt mal bisse damit rum spielen aber bisher bin ich sehr überzeugt und würde mich freuen wenn du die extrom noch mitlieferst.
und wegen der sprache: ich habe noch nichts gefunden was nicht in deutsch ist bzw, begriffe wie systeme oder ähnliches auch keine übersetzung brauchen!
Fazit: ein super release was noch ein wenig feinschlif braucht und dann das wohl beste rom seit langem wird
Click to expand...
Click to collapse
Es sollte alles auf deutsch sein bis auf den w-lan setting manager, der wird aber in der neuen version hoffentlich ersetzt, genauso wie der Verbindungsmanager - wird durch einen neuen ersetzt, der vom layout besser zum WM passt. Ich warte aber noch auf die Version 23053 oder neuer, bevor das nächste rom rauskommt. Am extrom bin ich gerade am arbeiten. Es ist aus Platzgründen fast nichts installiert...
Ich habe auf den xcpu scale verzichtet, weil meiner Meinung nach das rom auch so schon schnell genug läuft *wunder*
man I LOVE YOU!!! XD
some screenshot taken from my BA:
You're the best man
Swing* said:
das hatte ich gestern schon versucht aber ging irgendwie nicht! aber ich mache es gerade auf dem windows 7 rechner mit virtual pc und ich bin zuversichtlich! meld mich sobald es geht!
update:
mit windows 7 virtual pc xp mode geht das ganze ohne probs und ich werde in 10 min schlauer sein wie das neue rom arbeitet!
update:
es wundert mich das ich der 1. bin der das testet
ok also,
erstma geht das upgrade ohne probleme und auch der start vom system geht sehr schnell! die neue taskleiste finde ich sehr schick,allerdings weiss ich jetzt was er meint mit der auflösung. es ist ausserdem bisse irre führend, das wenn man ein prog öffnet und in der neuen leiste mit dem "X" schliesst, es nicht als task geschlossen wird sondern weiter im speicher ist. es sind keine spiele installiert und auch die anderen addons aus seinem erstem rom sind nicht dabei, was sicherlich mit dem beta status dieses release zu erklären ist.
es gibt wenige unterordner sodass alle programme sofort im startmenü liegen.werde jetzt mal bisse damit rum spielen aber bisher bin ich sehr überzeugt und würde mich freuen wenn du die extrom noch mitlieferst.
und wegen der sprache: ich habe noch nichts gefunden was nicht in deutsch ist bzw, begriffe wie systeme oder ähnliches auch keine übersetzung brauchen!
Fazit: ein super release was noch ein wenig feinschlif braucht und dann das wohl beste rom seit langem wird
Click to expand...
Click to collapse
genau das werde ich heute abend auch probieren, du bist nicht der erste der das probiert, hatte im anderen thread ja auch schon geschrieben, dass ich nur windows 7 x64 habe und deswegen schon lange nichts mehr geflasht habe, die vista methode funktioniert bei mir nicht, weil der 64bit treiber probleme macht und ueber vmware, wo ich gestern noch mal schnell ein xp aufgesetzt habe, bekomme ich keine stabile verbindung, ueber virtual pc 2007 sp1 brauch ichs gar nicht probieren, da kann man ja keine geraete durchschleifen, aber mit dem xp mode fuer 7 ist natuerlich eine idee. wenn das bei mir auch funktioniert, werde ich das tutorial ins wiki stellen, versteht sich
gestern abend hab ich noch bei d-two im profil gesehen, dass er dabei war, einen neuen thread zu erstellen, aber dann war er offline und um 11 hab ich dann aufgegeben, scheinbar etwas zu frueh, werde mich heute nach feierabend dran setzen und dann natuerlich auch gleich screenshots posten und einen ausfuehrlichen bericht. ich freue mich schon, ich habe seit der 21202 nicht mehr aktualisiert, weil meistens mehr bugs als features dazu kamen, aber das ist ja ein durchbruch!
besten dank schon mal im vorraus und bis spaeter!
Chef_Tony
Feedback on 23052
@d-two,
I have been waiting for someone to port this. I gotta say, this is pretty sweet!! The rom is blazing fast and it has no issues with Synchronization with ActiveSync, BT seems to be working OK (searched for and added a device, I will try data transfer later on), Wifi is working fine as well. The only thing that you are missing is an extended rom since the rom is as plain and vanilla as it can get (not that there is anything wrong with that ) Having said that, do you have this Extended Rom (particularly Office, I don't care much about the rest of the stuff since I don't use half of it).
Do you know of a registry entry to disable the phone? I try to turn it off in CommMgr but it comes back on a few minutes after. This is a pain for me since I do not use my BA as a phone anymore (at least for now).
I will try to report more later, but so far Great Job!!!!!!!
Finally WM 6.5.1 on BA,GooD WorK.
I will try it then post any issues.
thnx
nice
Thanks I will try it now !!
hi,good work
nice rom but i noticed that:
1- no owner info. icon and nothing at windows dir.
note:i will add other if i found other issues or missing things.
ok, status report:
flashing with vmware : NO
flashing with windows 7 xp mode in virtual pc: NO
finally i found an xp machine, that i could use for this purposes and it worked out as planned.
it's really fast and i like the general looks and feel of the new buttons and also the integrated large title bar, but that was to be expected.
@homam_france:
wow, there's tons of stuff missing, and i'm not talking extrom here. what about power settings, backlight, owner info... all the things i would normally set up first
ok, first time using the wlan manager, the start or X button don't work, i'm stuck, soft reset.
will edit with further info, once i am done setting up the device
@ egzthunder1
The Extended rom is already in work. (The office will be included.)
I don't know anything about any problems with the phone itself - I tested all the diffrent functions, on my ppc everything works pretty fine.
@ Chef_Tony. I flashed it on Windows 7 using AS drivers
Chef_Tony said:
@homam_france:
wow, there's tons of stuff missing, and i'm not talking extrom here. what about power settings, backlight, owner info... all the things i would normally set up first
Click to expand...
Click to collapse
Power Setting und Hintergrundbeleuchtung kann man über die large title bar erreichen (Batteriesymbol). Die owner info habe ich selbst gerade erst gesehen, dass die fehlt, werde ich nachträgllich hinzufügen. Das Rom ist deswegen so "nackt", da es sonst nicht gepasst hätte - deswegen meinte ich eben, dass ich noch ein extrom erstelle, kommt innerhalb der nächsten Tage, spätestes am Wochenende.
Chef_Tony said:
ok, first time using the wlan manager, the start or X button don't work, i'm stuck, soft reset.
will edit with further info, once i am done setting up the device
Click to expand...
Click to collapse
Es ist nicht notwendig ein soft reset zu machen, musst lediglich den roten Hörer drücken.
Chef_Tony said:
ok, status report:
flashing with vmware : NO
flashing with windows 7 xp mode in virtual pc: NO
finally i found an xp machine, that i could use for this purposes and it worked out as planned.
it's really fast and i like the general looks and feel of the new buttons and also the integrated large title bar, but that was to be expected.
@homam_france:
wow, there's tons of stuff missing, and i'm not talking extrom here. what about power settings, backlight, owner info... all the things i would normally set up first
ok, first time using the wlan manager, the start or X button don't work, i'm stuck, soft reset.
will edit with further info, once i am done setting up the device
Click to expand...
Click to collapse
@Chef and Homan,
The owner info seems to be something with the 6.5.1. I have seen a few roms in the Raphael section with similar issues.
I believe this link has all the info that we need to get our stuff back (thanks Da_G)
u can find power ,backlights icons in the upper bar.
about the Owner info.,it is a problem with some sofwares that its activation depend on the owner info.
there are alot of softwares dont work properly,like finger keyboard and some dictionaries.
another missing here, about the option of the keyboard,we cannot set the keyboards option.
by the way, i update the new rom by windows vista,without any problem.
some times the x bottun is not respond,but it will respond by press ok hardware bottun.
Chef_Tony said:
ok, first time using the wlan manager, the start or X button don't work, i'm stuck, soft reset.
will edit with further info, once i am done setting up the device
Click to expand...
Click to collapse
I can confirm that the "x" does not work on the wlan manager. Although you can get out by pressing the "End call" button. This will take you directly to the home screen.
The start button does work, but not on the home screen. I just tried to use it in the Contacts screen and it works ok.
tony, ich wollte kein persönlich angreifen mit dem test!
und wenn du willst erklär ich dir wie das in windows 7 mit dem xp mode geht, weil das klappt echt super
ABER:
@d-tow:
leider geht das wifi nicht! habe es in der uni gerade getestet und mit xplodes rom geht alles und mit dem neuen jetzt nicht. er findet rein gar kein spot!
und im telefonbuch ist eine funktion "A" die aber nicht erklärt ist
das war es erstma

Aufruf an die Programmierer: HD2 OS Edit WM 6.5.x für Newbies

GERMAN
Hallo und noch mal vielen Dank für die zahlreich zur Verfügung gestellten ROM-Files, welche sich auf meinem HD2 durchaus sehen lassen, habe da auch einen Favoriten, welchen ich aber hier der Fairniss halber gegenüber all den anderen Programmieren nicht nennen möchte - dennoch, BigBusiness Leute!
Kurze Vorstellung:
Bin einer der Ersten, der schon am 21.11.2009 dieses HTC sein Eigen nennen konnte. Als gelernter Informatiker (Technikerausbildung mit Fachstudium) bin ich natürlich sehr am Programmieren meines Eigenen Windows 6.5.x interessiert.
Mit 25 Jährchen kann man mich ruhig mal ernst nehmen, und mir den jenigen Support geben, um welchen ich euch hiermit bitte. Zu meinen Fragen:
1. Wo habt ihr den Quellcode her, bzw. in welcher Programmierumgebung habt ihr es zu Stande gebracht die Anordnung der Sense Schaltflächen zu verändern?
2. Ich habe irgendwo schon mal so eine Art HD2 Emulator für Windows PC Betriebssysteme gesehen. Hoffentlich fällt euch ein, wo ich den vielleicht mal saugen kann.
3. Ist es möglich weitere Befehle in Menüs unterzubringen, bzw. um auf meine Frage zu kommen: Es besteht die Möglichkeit im Startmenü die Anordnung und Sichtbarkeit der Elemente einzustellen (Wabenmuster) - würde es möglich sein, eine Art Menü-Schaltfläche zu editieren, welche Optionen für das Startmenü aufruft, in denen man individuell festlegen kann, wie viele Spalten (3-5), ob versetzt oder im alten iPhone-Stil, das Startmenü beherbergt und welche Größe die Symbole der Elemente haben sollen?
4. Der Grundgedanke würde mir gefallen und Ansätze sind zu sehen, wenn man sich die unterschiedlichen Themes anschaut, welche unterschiedliche Uhren beinhalten. Ist es möglich zwischen mehreren Schriftarten zu wechseln? ich sags mal so, selbst SAMSUNG hat das schon geschafft!
Danke für die hoffentlich zahlreichen Posts die mich dann auch in meinen Vorhaben unterstützen.
Bye
- - -
ENGLISH
Hello, and thanks for your ROM files, which are very great! One of my favorite (I don't want to call the name of the COOK, means fairness against all of U) looks nice on my HD2.
Short description of Me:
I'm 25 and one of the first owners in Germany, means I bought it on 21. Nov 2009. I'm Consulting Engineer (branch of technical informatic). Against you wrote I ment you could be "serious" with me =) an hope that you could help me with little support, because I'm newbie in Mobile Programming. I please you. So that are my questions:
1st- "YES I KNOW" but to clear and solve the problem with the translation - Where did you find the source of winmobile or what are you using for compiling and programming things like "Placement of Sence Buttons"?
2nd- "I thought i found an HD2 emulator somewhere, it looked like" - but now I know i'ts only the Device Emulator from M$ and a Skin which looks like - but what a pitty I did't find it again. if you know where I can load them It w'd be nice.
3rd- Is it possible to integrate additional entries in Windows menus? OR for especially - taking advance of make own decisions how much Cols are in the Startmenu without installing *.cab for each option (3 cols, 4 cols, 5 cols, ... or availability to move Shortcuts with your finger to your previous prefered position or in Subfolder - I saw it in one of the ROMS, but without handling of Subfolder movement)
4th- You all did good jobs, but everyone has it on taste, means I'm not OK with some Themes or Other things in the Custom ROMs. BUT is there also a possibility to change Fonts without installing *.cab files for each of the prefered font? Embedding of a LIST where you can change the font you want in the fontmenu (Manila-Settings-Personalize-Font), would be the first thing I want to do. I will saying could be no problem - SAMSUNG also does.
Thanks for hopefully many posts and you for the support I need.
Bye
1 Post und dann schon gleich voll daneben
Das ist ein englisches Forum die sprache ist englisch
als informatiker solltest du der Sprache mächtig sein.
Ausserdem lesen bildet. Informiere dich erst bevor du solche Fragen stellst
For all:
This is an English forum, the language is English
Informatics as the language you should be powerful.
Read also formed. Inform yourself first before you ask such questions
Hi,
your first post here, and all is wrong.
- the forum language is english
- use the search function
with friendly greet
starbase64
Just read only one of about 100 manuals "How to cook a rom" and mostly all questions will be answered.
I was cooking BlackBerry ROMs in the past - I used (how is the Framework called?) Windows Explorer and I think that is one of the essential things you really need!
I wish you good luck on the search for the HTC Sense and Windows Mobile 6.5 source code - neverending search I think.
PS: After your post nobody here will take anything you say seriously...
* ROFL *
I thought we don´t have April 1st yet.
Must be your bad day. Bad start here in the forum.
I would never dare to write such a posting here.
Maybe it´s better you re-think your strategy.
passt_immer said:
Hallo und noch mal vielen Dank für die zahlreich zur Verfügung gestellten ROM-Files, welche sich auf meinem HD2 durchaus sehen lassen, habe da auch einen Favoriten, welchen ich aber hier der Fairniss halber gegenüber all den anderen Programmieren nicht nennen möchte - dennoch, BigBusiness Leute!
1. Wo habt ihr den Quellcode her, bzw. in welcher Programmierumgebung habt ihr es zu Stande gebracht die Anordnung der Sense Schaltflächen zu verändern?
2. Ich habe irgendwo schon mal so eine Art HD2 Emulator für Windows PC Betriebssysteme gesehen. Hoffentlich fällt euch ein, wo ich den vielleicht mal saugen kann.
3. Ist es möglich weitere Befehle in Menüs unterzubringen, bzw. um auf meine Frage zu kommen: Es besteht die Möglichkeit im Startmenü die Anordnung und Sichtbarkeit der Elemente einzustellen (Wabenmuster) - würde es möglich sein, eine Art Menü-Schaltfläche zu editieren, welche Optionen für das Startmenü aufruft, in denen man individuell festlegen kann, wie viele Spalten (3-5), ob versetzt oder im alten iPhone-Stil, das Startmenü beherbergt und welche Größe die Symbole der Elemente haben sollen?
4. Der Grundgedanke würde mir gefallen und Ansätze sind zu sehen, wenn man sich die unterschiedlichen Themes anschaut, welche unterschiedliche Uhren beinhalten. Ist es möglich zwischen mehreren Schriftarten zu wechseln? ich sags mal so, selbst SAMSUNG hat das schon geschafft!
Click to expand...
Click to collapse
you can find all the answers by browsing/reading/searching this forum. no new thread needed.
1. cfc_gui.exe & hex-editor
2. wm sdk
3. possible (replacing startmenu_***.cpr->listview but no squares)
4. cfc_gui.exe & paint.net
please at least try to translate your post....
you have to read some manuals for cooking.
this will give you a feeling of work before a new rom could on a device - with no errors.
for optical design search for ready-programs that could make themes or equals.
if you dont understand my english ... that could be because i am german.
no problems to understand you
i´am german too, english is not my favorite language
but this forum is english we can use language tools to understand

Windows Mobile Rom 6.1 ENG translate in GER

Hey Guys,
I need a german 6.1 rom for the HTC Magician.
I don't find any so i wan't to translate a ENG Rom in GERMAN.
Can anybody say me how can i do it?
Regards
djmaggo
djmaggo said:
Hey Guys,
I need a german 6.1 rom for the HTC Magician.
I don't find any so i wan't to translate a ENG Rom in GERMAN.
Can anybody say me how can i do it?
Regards
djmaggo
Click to expand...
Click to collapse
you should follow existing guidelines, such as one given by Que PPC! look at his threads ~ http://forum.xda-developers.com/showthread.php?t=684549
i am so creazy ...
sorry, but i cant write English good and here is a German question so i answer in German. THX for your understanding
ich hatte eine German cab Datei, die ich einfach nur installieren musste, nachhr musste man noch einen Eintrag in der Registrie machen und alles war in deutsch!
Leider hatte ich das Gerät verkauft und nun wieder neu eingekauft und die Dateien sind weg. Sollte einer die deutsche cab haben für wm5 oder 6 Bitte Melde Dich
MOD EDIT: Google Translate: "I had a Deutsch cab file that I simply had to install it, you had to have an entry nachhr make the registration and everything was in German!
Unfortunately, I had sold and bought again and again, the files are gone. Should a German have the cab for wm5 or 6 Please Join"
wolfsstolz said:
i am so creazy ...
sorry, but i cant write English good and here is a German question so i answer in German. THX for your understanding
ich hatte eine German cab Datei, die ich einfach nur installieren musste, nachhr musste man noch einen Eintrag in der Registrie machen und alles war in deutsch!
Leider hatte ich das Gerät verkauft und nun wieder neu eingekauft und die Dateien sind weg. Sollte einer die deutsche cab haben für wm5 oder 6 Bitte Melde Dich
MOD EDIT: Google Translate: "I had a Deutsch cab file that I simply had to install it, you had to have an entry nachhr make the registration and everything was in German!
Unfortunately, I had sold and bought again and again, the files are gone. Should a German have the cab for wm5 or 6 Please Join"
Click to expand...
Click to collapse
here, German.cab
this is not realy a German Translation for that ....
This is a German T9 Language File but you need the "MasterApp" too to use that File
I have today Post a Link with Manila 2d you can Translate your Phone to German (Homescreen only) "aber ich denke das reicht "
now i write German my engish is bad ...
Also ich hatte mal eine German Cab, die alles in deutsch umgewandelt hat, leider ist die abhanden gekommen.
Problem ist, das man nicht einfach so eine cab nehmen kann denn die deutschen Programme (Player IE etc.) müssen zuerst in deutsch auf das Gerät kopiert werden, dann müssen die ORdner umbenannt werden bsp.
Program Files = Programme
wenn man das nicht macht und die cab installiert, wird das Gerät am Ende nicht mehr booten und muß neu geflasht werden.
Ich hatte es einmal geschafft und die Rom komplett in deutsch, leider das Gerät abgegeben und RomBackup gelöscht :S
Es ist machbar nur muß man sich die Dateien aus einem deutschen Rom kopieren. Am einfachsten wäre es, wenn man ein Gerät mit deutscher Rom hätte, dann einfach die ORdner umbenennen und Dateien kopieren.
Anschließend die German Lang cab drauf und die Registry von 1013 auf 407 ändern XD
Wer Bock drauf hat, Bitte das Rom Hochladen XD
Da ich ein iPhone habe, habe ich z.Zt kein großes Interesse daran mir die Mühe zu machen, bin aber gerne bereit zu helfen.
Einfach PN an mich, teilweise habe ich dateien da.

Categories

Resources