Related
Hi guys
My 2GB Mini SD card is not working. I have a Trinity - Orange SPV M700, I wonder if anyone could tell me how to I fromat it and which FAT system to use?
Sorry if this is a stupid question, but I did try to use File explorer and looked everywhere in the Settings section.
I am thinking, maybe I need to use my card reader in the computer or do I have to buy a 3rd party program to do this?
Any idea
Thanks
Using the cardreader in your computer is fine. Use the FAT format, not FAT32.
lts said:
Using the cardreader in your computer is fine. Use the FAT format, not FAT32.
Click to expand...
Click to collapse
Why not FAT32? I've been using a 4gb miniSD fromatted in FAT32 for months without a problem.
If You don't have a card reader or an adaptor for the Micro-SD You can do it via wm5 storage. FAT32 should be better than FAT.
I also had problem with SD card (2Gb). Then I used one program for formating Panasonic SDformatter an now I don't have problems anymore.
Link: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
Try with this program.
By
As you may know, the SD specifications are not open but must be licensed and are protected by NDA's. Therefore I pesonally can't say for sure whether or not FAT32 is within the SDA 1.0/1.1 standard, but I would guess that it's not.
It's true that using FAT32 seems to work with most cards and controllers in the PPC world, but apart from eliminating the 512 files limit, I don't really see any advantage over FAT.
FAT32 is not a 'high performance' filesystem, so in terms of read/write speed it doesn't give you anything compared to FAT.
If you use a 4GB non compliant card, then of course you must use FAT32, since FAT only allows for 2GB.
So in short, unless you can't live with the 512 limit, I don't see that FAT32 will give you anything over FAT, and when you use FAT, you are sure to be within the standard.
lts said:
...but apart from eliminating the 512 files limit, I don't really see any advantage over FAT...
Click to expand...
Click to collapse
Thanx for nice info, if that's true, FAT32 is the only option user may have when formating card, this limit is a way to small !
banesi said:
Thanx for nice info, if that's true, FAT32 is the only option user may have when formating card, this limit is a way to small !
Click to expand...
Click to collapse
Please note that 512 is not the limit of the total number of files that can be stored on the card, it is the max. number of entries in the root directory.
The max. number of files that can be stored on a FAT filesystem is 65517.
thank you for clarification, is there a way I can already check in what format my card is formated?
banesi said:
thank you for clarification, is there a way I can already check in what format my card is formated?
Click to expand...
Click to collapse
If it hasn't been reformatted since it left the factory, then I think it's safe to assume that it's FAT formatted.
If you want to check, then put it in a card reader and look at its properties (assuming your PC is running Windows).
i'm using Windows XP, but in my computer my pda is listed as a windows mobile phone and if right click the storage card, there's no option to format it...what should i do ?
thanks
Hello everybody,
Does wm support partitions?
So can I split up my 8 gb sd card into two partitions of 4?
Or does wm not support this?
Thanks!
Hope you don't mind me asking, but what for ?
E.g.
Partition one:
Haret > Android
Partition two:
Multimedia stuff + wm
or
Partiton one:
Multimedia
Partition 2
Program files and stuff
There is no need as both Andriod and WM6.x can see Fat/Fat32, which I presume your SD card is formatted.
If you want to separate your media from any programs you want to install on the sd card just use a different folder.
Plugging your SD card into you TP2 is the same as plugging it into your desktop / laptop whatever the OS.
Would you partition a SD card that was plugged into your desktop ?
If you want to partition the SD, try it and let us know... however i think that it will appear as 2 storage cards in explorer.
I will give it a try
It is possible but not usable...
I also searched around on the internet and it works
But I am back at one sd card since I find folders easier than 2 storage cards.
rick94 said:
E.g.
Partition one:
Haret > Android
Partition two:
Multimedia stuff + wm
or
Partiton one:
Multimedia
Partition 2
Program files and stuff
Click to expand...
Click to collapse
I know exactly where you're comin' from, man. After I get a 16GB class 6 microSDHC, I intend to partition ~8.5GB as NTFS ('cause I'd like the the max capacity to hold a full DVD DL disk) to handle larger file transfers btwn desk/laptops. And, I'd still have a whoppin' ~7.5GB to be used by the tele as FAT32...'just haven't made that microSDHC purchase yet, but I'd imagine it to be plausible.
kain144000 said:
I know exactly where you're comin' from, man. After I get a 16GB class 6 microSDHC, I intend to partition ~8.5GB as NTFS ('cause I'd like the the max capacity to hold a full DVD DL disk) to handle larger file transfers btwn desk/laptops. And, I'd still have a whoppin' ~7.5GB to be used by the tele as FAT32...'just haven't made that microSDHC purchase yet, but I'd imagine it to be plausible.
Click to expand...
Click to collapse
WM doesn't work with NTFS
It used to..
dik23 said:
WM doesn't work with NTFS
Click to expand...
Click to collapse
I remember some time ago on Aximsite or another older related site reading how to format NTFS and use a Compact Flash card on Windows Mobile. I did it on my Axim and Ipaq at the time, and kind of remember it working.
dik23 said:
WM doesn't work with NTFS
Click to expand...
Click to collapse
I know. However, if there're two partitions, NTFS @ ~8.5GB and FAT32 @ ~7.5GB, then I'd imagine that Windows would see the storage card as two drives, while Windows Mobile would see the 16GB, storage card as ~7.5GB. Anyone, please, do correct me if I'm wrong in my assumption.
This has made me wonder, too. Why does WM refer to "Storage Card 1" occasionally when inserting/unplugging memory cards...? It kinda implies that there is room for multiple cards at the same time...????
Chris
i partitioned my 16 gig hard drive and installed linksys on one partition so i can plug into my computer and dual boot from my phone...
i dont really see a reason to create multiple partitions to have the same function as folders (ie seperating media from doc, ext...)
kain144000 said:
I know exactly where you're comin' from, man. After I get a 16GB class 6 microSDHC, I intend to partition ~8.5GB as NTFS ('cause I'd like the the max capacity to hold a full DVD DL disk) to handle larger file transfers btwn desk/laptops. And, I'd still have a whoppin' ~7.5GB to be used by the tele as FAT32...'just haven't made that microSDHC purchase yet, but I'd imagine it to be plausible.
Click to expand...
Click to collapse
You would not gain anything by formatting NTFS other than the ability to set NTFS permissions in Windows. A movie can be stored on a FAT/FAT32 partition with no ill affect on usability. Also, when you purchase any type of storage, the actual formatted size is usually smaller than the advertised size. So if you buy a 16GB card, you will most likely end up with around 15GB max of usable space. I would not plan on having 7.5GB of free space after creating a 8.5GB partition.
htcfan78 said:
You would not gain anything by formatting NTFS other than the ability to set NTFS permissions in Windows...I would not plan on having 7.5GB of free space after creating a 8.5GB partition.
Click to expand...
Click to collapse
No, you'd also be able to support files larger than 2GB. And, I know it wouldn't be 7.5GB, that's why I'd said about (~). Prob more like 6.8GB, or so.
dik23 said:
WM doesn't work with NTFS
Click to expand...
Click to collapse
I know NTFS doesn't work on Windows Mobile. However, I would assume that if you were to make two partitions, one NTFS, and the other FAT32, the Windows Mobile device would show the FAT32 partition, while a Windows dsktp would show the microSDHC as two partitions, NTFS and FAT32. I've ordered a 16GB microSDHC Class 6, and I'll post my results after I receive, partition and format the card.
Okay. So've received my 16GB microSDHC Class 6, and have partitioned and formatted with Paragon Partition Manager Pro v9.0, and have...
Partition 1 - microSDHC N, 8.61GB NTFS
Partition 2 - microSDHC, 6.24GB FAT32
The device sees the FAT32 partition, as intended. Windows (Vista), however, shows only the 1st partition (NTFS) of the microSD, even when using the device in Disk Drive USB mode. Disk Management sees the FAT32 partition, but no matter what options I select, I'm met with
Code:
An unexpected error has occurred. Check the System Event Log for more information on the error...
At this point, I just need Windows to allow me to give the partition a drive letter. Any help would be greatly appreciated.
in the start search bar type computer managment then go to storage/disk management select the disk and then right click and change letter.
thats supposed to let you change the letter i have to deal with this alot at work with all the network drives and my externals
hope this helps
shigeo said:
...change letter...thats supposed to let you change the letter
Click to expand...
Click to collapse
I'd tried this believing that Windows only needed to assign a drive letter, but to no avail. :\
Hey I have a couple of class 6 8 gig cards that I used in my G1 that I would like to keep using on the Vibrant. Of course the cards were formatted with partitions to Fat32, ext 2, and swap ext. After rm all the partitions, how can I format them back to use on the Vibrant as regular storage? The comp did not recognize the card at all so I couldn't reformatted that way.
Any suggestions or did I forget some step.
Thanks
Well.. you are using Amon_RA's Recovery. Just put the card into G1 and boot into recovery and partition the SD card and set SD card to 100% FAT32 (0 MB on swap; 0 MB on ext) and you're pretty much set. Easiest way to set it up =)
zephiK said:
Well.. you are using Amon_RA's Recovery. Just put the card into G1 and boot into recovery and partition the SD card and set SD card to 100% FAT32 (0 MB on swap; 0 MB on ext) and you're pretty much set. Easiest way to set it up =)
Click to expand...
Click to collapse
Thanks I tried that but none of my card readers are able to read either card using that technique. They can read the card that came with the Vibrant and I can see it's a fat file system.
without partitions you would probably have to go into the partitioning program in the control panel on windows or use your g1 to partition in recovery as previous poster said.
Sent from my Samsung Vibrant
Ok problem solved, actually not a problem at all 8g SD Card with just 100% fat32 worked just fine once installed in the Vibrant, thanks
Jdom58 said:
Ok problem solved, actually not a problem at all 8g SD Card with just 100% fat32 worked just fine once installed in the Vibrant, thanks
Click to expand...
Click to collapse
hehe.. you're welcome, its what i said
Hi,
I wonder if someone can help me, I've got WP7.5 install as a NAND installation, with Android 4.0.4 as a SD installation. Both work brilliantly, although I do have some slight problems.
Android won't detect an SD card installed, so I can't use some apps, that require an SD card to be present.
Does anyone know if there is a fix for this, surely I'm not the only person in this position.
Cheers
I'm guessing it's because your SD has been formatted specially by WP, and Android can't read this. Your FAT32 partition is probably too small for anything to be stored in it.
The Fat32 partition is 1.6Gb.
Is it worth making that bigger, or creating another FAT32 partition?
Cheers
Hmm, I'd guess that you wouldn't have any more than 200-300MB free on your SD as read by SD Android then. I don't know how much an SD Android build takes up but the data.img is at least 1GB of that. As for increasing the partiton/creating a new one, I don't actually think that's possible without losing your data is it?
Hi,
Thanks for your help.
I'm not too fussed about losing anything...
Here is what I have just tried without any success.
I have a 8Gb card partitioned like this.
1.*Gb
Primary, FAT32, (Android SD install)
2Gb
Primary, FAT32, (My hope would be that Android would see this as the SD card)
4Gb Other (WP 7 partition)
No luck unfortunately, any ideas?
Cheers
Are you sure you're using an 'unlockable' WP7.x ROM? If so, try formatting the storage card to normal and flash a Android build, see if it utilises the memory card like normal, if it does, then I would say that you're doing something wrong when setting it up.
Just double check each step of a tutorial (example: this one) twice and hopefully you'll only have to flash one more time.
Why do you have 2 fat 32 partitions ?...just use one fat 32 partition..in regular sd android....data image is used as internal memory and fat 32 part as sd card
I believe your second partition is not being recognised...make only one fat 32 partition you don't need two
Sent from my HTC HD2 using Tapatalk 2
So I have a Samsung Tab a6 7 T280 wifi and I've inserted a MicroSD card (128GB). I've done this with the stock os first and I just got the message card can be removed safely. and it wouldn't let me mount it.
Now I've installed the Tinker V5.1 Stock Rom over it and it still happens. (wanted a faster os on it).
I can reformat the card with twrp to be ext4 or exFAT and it doesn't change a single thing. if I insert the sd card I get a quick preparing card and then instantly the message card can be safely removed. clicking on mount sd card in storage from settings doesn't do anything except prompt same message.
I'd try a different sdcard.
Okay, so I hope I can help, I have the SM-T280, I do not use Tinker ROM, instead I debloated my stock ROM and use an SPA kernel by @_mone. If you're trying to extend storage to your tablet, you'll need to use a PC to partition the SD card two PRIMARY partitions. I used on Windows MiniTool Partition Wizard (free), and I used a FAT32 partition and an ext2 partition. With the stock ROM/kernel I had problems using ext4 or extFAT which didn't make sense to me but it is what it is, and I used the app Apps2SD to handle all the work.
The main thing, you need to make sure your SD card has TWO (2) PRIMARY partitions.
Good luck.
zenful said:
Okay, so I hope I can help, I have the SM-T280, I do not use Tinker ROM, instead I debloated my stock ROM and use an SPA kernel by @_mone. If you're trying to extend storage to your tablet, you'll need to use a PC to partition the SD card two PRIMARY partitions. I used on Windows MiniTool Partition Wizard (free), and I used a FAT32 partition and an ext2 partition. With the stock ROM/kernel I had problems using ext4 or extFAT which didn't make sense to me but it is what it is, and I used the app Apps2SD to handle all the work.
The main thing, you need to make sure your SD card has TWO (2) PRIMARY partitions.
Good luck.
Click to expand...
Click to collapse
What about the Sizes? As in one partition 60 GB the other one also 60 GB ? Or the fat32 partition 1 GB and the ext2 the rest?
Panslothda said:
What about the Sizes? As in one partition 60 GB the other one also 60 GB ? Or the fat32 partition 1 GB and the ext2 the rest?
Click to expand...
Click to collapse
FAT32 is not for large capacity storage. Use exFat. There isn't much point in having such a large ext2 partition. It's incompatible with media transfer protocols unless you use a Linux system.
This device fully supports exFAT. I use a 64gb sdcard no issues.
ashyx said:
FAT32 is not for large capacity storage. Use exFat. There isn't much point in having such a large ext2 partition. It's incompatible with media transfer protocols unless you use a Linux system.
This device fully supports exFAT. I use a 64gb sdcard no issues.
Click to expand...
Click to collapse
Well my current one is exfat formatted. works perfectly fine on PC only thing is its 128 GB.... I mean is that maybe the issue? that its to large?
Panslothda said:
Well my current one is exfat formatted. works perfectly fine on PC only thing is its 128 GB.... I mean is that maybe the issue? that its to large?
Click to expand...
Click to collapse
I wouldn't think so, I'm sure it supports 128gb cards.
Just partition it into to halves. First partition exfat. Leave the other unformatted and see what happens.
ashyx said:
I wouldn't think so, I'm sure it supports 128gb cards.
Just partition it into to halves. First partition exfat. Leave the other unformatted and see what happens.
Click to expand...
Click to collapse
partitioned into a 40 GB exFAT partition and left rest unpartitioned. Didn't change anything. if I pop it in the tablet I get a short preparing sd card notification then immediately an SD card safe to remove notification...
I'm really confused by this. The tablet is new so I doubt that it's broken but I don't know. Do you know if there's a way to check any kind of logs on Android like dmesg on Linux as an example to see what happens with the sd card?
Panslothda said:
partitioned into a 40 GB exFAT partition and left rest unpartitioned. Didn't change anything. if I pop it in the tablet I get a short preparing sd card notification then immediately an SD card safe to remove notification...
I'm really confused by this. The tablet is new so I doubt that it's broken but I don't know. Do you know if there's a way to check any kind of logs on Android like dmesg on Linux as an example to see what happens with the sd card?
Click to expand...
Click to collapse
It's best just try out another card to rule out the card.
ashyx said:
It's best just try out another card to rule out the card.
Click to expand...
Click to collapse
Welp gotta buy one first then :/
Panslothda said:
Welp gotta buy one first then :/
Click to expand...
Click to collapse
Nobody can lend one for a few minutes? Or try the card in someone else device?
Panslothda said:
So I have a Samsung Tab a6 7 T280 wifi and I've inserted a MicroSD card (128GB). I've done this with the stock os first and I just got the message card can be removed safely. and it wouldn't let me mount it.
Now I've installed the Tinker V5.1 Stock Rom over it and it still happens. (wanted a faster os on it).
I can reformat the card with twrp to be ext4 or exFAT and it doesn't change a single thing. if I insert the sd card I get a quick preparing card and then instantly the message card can be safely removed. clicking on mount sd card in storage from settings doesn't do anything except prompt same message.
Click to expand...
Click to collapse
According to Samsung, the T280 will support a 256gb SD card BUT I know from experience that SD cards over 32gb can be VERY touchy. If you use a PC to remove all of the partition and then let the tablet try to do its own formatting and it still doesn't work, I'd say you have an incompatible SD card. That doesn't mean the card is bad but that it just won't work in the T280.
As an example, a Samsung EVO+ card (which can be found on eBay for $30) will probably work while a "no name" card from China, probably won't.
lewmur said:
According to Samsung, the T280 will support a 256gb SD card BUT I know from experience that SD cards over 32gb can be VERY touchy. If you use a PC to remove all of the partition and then let the tablet try to do its own formatting and it still doesn't work, I'd say you have an incompatible SD card. That doesn't mean the card is bad but that it just won't work in the T280.
As an example, a Samsung EVO+ card (which can be found on eBay for $30) will probably work while a "no name" card from China, probably won't.
Click to expand...
Click to collapse
I always use Samsung EVO cards and they always work perfectly. Price per GB they are very reasonable too.
Scandisk ultra i find ok no matter what size
Sent from my SM-T585 using XDA-Developers Legacy app