Is there a way to turn off 3g, if not using on the tilt 2? it's draining my battery. wktask failed on me, gave me errors and froze the phone. are there other similar apps like wktask?
Install the advanced configurator tool (search) and enable Band Selection in the phone settings.
Just go to the built in comm manager and switch it off....
well Im using NGGz 6.5 rom and the last option on the list is 3G, just tap the little on/off switch works great for me.
Although by the sounds of it maybe this option is not available on your rom?
not sure where the built in comm manager in...
i'm using the standard rom..i just got this phone a few days ago.l havent flashed it yet.
settings
if its anything like the stock TMOUS ROM slide over to the settings tab and look for communications tap that and down at the bottom it should be there.
so i'm noticing that my data connection always get turned on by itself. any i dea why? i set all my outlook exchange and email to manual sync...
if not, i did find this cab that can disable it..i'll give it a go and see if it will work
I think WMLongLife should do what you want. I haven't tried it, but there are reports of it working with various TP2s.
Hi folks
tech savvy and search friendly i may be BUT,,, i cant get the 3g to go off on a htc tilt 2.. ive tried about all and searched till i have no fingers ..i cant get the communications manager to stop to imout a new one .. nothing.. anyone PLEASE help.. i got this phone free new for a fuze and im really happy EXEPT at&t or whomevers right that revoved the ability to switch bands ..i hate to be flamed,, but if thatas the way you guys want to be u r loss.... i have searched.. even with windows longlife it reverts to 3g...i loved the fuze,, and thanks to you guys here ,, you made it very nice.. i put a new manager and snaps in the other and it worked .. my two new ones no luck..anyway i have a tilt 2.. st7377.. anyones help is appreciated as i like the phone.. just no d pad..
On my European TP2 with stock ROM I do this to switch off 3G:
Settings tab > Communication > Telephone (not the on/off switch!! Just tap the phone icon or title) > Band > GSM
and you are done. If it switches on 3G after that, it's bugged somehow.
hello
thanks for the input ,, any fix for the issue ? that is exactly what im seeing ,, it goes right back to 3g.. i have tried it all just about..cant get the communications manager to stop or id try duttys 10 button.. but it refuses to install..not really wanting to swap the rom ,,,YET.. just want 3g to go to h*ll. imput hill if you wanna.. but you know what i mean!!
Just got my Tilt 2. I couldn't believe there is no way to turn off 3G in the stock ROM settings as there was on my Treo 750. I looked into the Advanced Configuration Tool and the WMLongLife tool. They are both incredible but are overkill for me. I just want to be able to manually turn 3G off and on. I found something on Handango dot com that seems to work well. It is called Bandswitch and is made specifically for HTC windows phones. Only problem is its ridiculous price, $14. But it seems to keep 3G off until I enable it again. It also has some other features regarding wifi and bluetooth. It has a trial version so I hope some of you try it out and let me know your pros and cons. I am surprised by how little discussion there is on this subject.
install that cab from the previous post and soft reset your phone. it should work. if not, you will need to go to comm. manager and turn off 3g.
anyone have the 3g toggle for comm manager download? i found some but they replace the microsoft direct push rather than just putting in the blank space below data connection.
The Jack of Clubs said:
anyone have the 3g toggle for comm manager download? i found some but they replace the microsoft direct push rather than just putting in the blank space below data connection.
Click to expand...
Click to collapse
Hey man...I actually enabled that switch in comm manager with a setting that was buried in one of the regular config apps we use (total commander, HD tweak, Rhodium settings tool), I just can't remember which right now.
It put the switch you're talking about on the comm manager screen, right below the data connection spot. But...on my 6.1 ROM it doesn't have any effect, I suspect it'll work properly on a later WM/Sense build.
I'll dig in a bit and see if I can remember/discover which one had the setting..
well if you find out, let me know. i looked through the registry with total commander and then entrys in hklm\software\htc\commmanager arent there. i think itll take more than a simple registry edit.
The Jack of Clubs said:
well if you find out, let me know. i looked through the registry with total commander and then entrys in hklm\software\htc\commmanager arent there. i think itll take more than a simple registry edit.
Click to expand...
Click to collapse
I found it In Advanced Config, hit the "menu" softbutton (bottom right), then choose "more settings", then "comm manager"....you'll get a list of all the switches you can add/remove from the comm manager.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how do i get past that?
i did try changing on/off buttons to both large and default and all that does it make it to where comm manager doesnt open.
The Jack of Clubs said:
how do i get past that?
i did try changing on/off buttons to both large and default and all that does it make it to where comm manager doesnt open.
Click to expand...
Click to collapse
Yeah...I don't really know how to get past that, I didn't know it had that limit because even with the 3g switch I was still only using 6.
However, when I just tested it by adding the "beaming" button, it threw up that same error, but the button still showed up, giving me a total of 7 switches in the comm manager screen. I have no idea how/why. I checked in Advanced Config again, and the beaming button was un-checked.
and yes, I get the same results when I change it from switches to large or default buttons, comm manager won't open at all.
I can't even seem to find my comm manager on the updated Tilt2 ROM.....!
Related
I whipped up a little MortScript package with installer to let you easily set a custom operator name and the interval in which the script will check to make sure your operator name is set. It's a two-part MortScript, opmon is the config GUI and opset is the background process which will run on first load and at system startup to ensure your custom name "sticks".
Installation & Usage
1. Download the zip file below and extract the CAB installer.
2. Run the CAB on your device to install.
3. Launch the config GUI by going to Start -> Programs -> OpMon.
4. Set your name and delay, then exit to apply the changes.
This has only been tested on my Mogul, but there is nothing device specific in the script, so it should work on almost any phone.
As always, suggestions are welcome and I hope you like it!
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Very neat program works on my XV6700 WM5 AKU 3.5
What did you guys use to customize your Today plug-in? HTC Home Plugin Customizer v0.8b??
Reverts to default
I'm using this on my vario II and no matter what i set my delay to it changes back from custom to default after i've used an app or even change to a different tab on htc home.
Is there a fix?
Johnston411 said:
I'm using this on my vario II and no matter what i set my delay to it changes back from custom to default after i've used an app or even change to a different tab on htc home.
Is there a fix?
Click to expand...
Click to collapse
Don't know why that's happening. Do you have a task manager? If you do could you check to see if opset.exe is running in the background?
It's also possible that your delay is set too high. If something changes your custom name back to default, it will stay like that until the opset program checks at the specified interval.
this thing rocks...WOOT
emunutz said:
Don't know why that's happening. Do you have a task manager? If you do could you check to see if opset.exe is running in the background?
It's also possible that your delay is set too high. If something changes your custom name back to default, it will stay like that until the opset program checks at the specified interval.
Click to expand...
Click to collapse
Love the program.....but.......
I have the delay set to 90 seconds yet it seems to take up to 5 minutes for it to change from default (UMTS 3) to my setting. AS it changes back every time the screen goes to sleep it is a bit of a pain.
Am I doing anything wrong?
Andych said:
Love the program.....but.......
I have the delay set to 90 seconds yet it seems to take up to 5 minutes for it to change from default (UMTS 3) to my setting. AS it changes back every time the screen goes to sleep it is a bit of a pain.
Am I doing anything wrong?
Click to expand...
Click to collapse
Seems I have managed to get it working as it should. Just required a soft reset.
http://img222.imageshack.us/img222/8846/sshot001lg5.png
Very Cool!
AT&T,
Welcome to the new RayT&T Network! Muahahaha...
Very empowering even if only a facade.
Thanks
Thank you Emunutz.Good job !
Tested to Mio A701 and work perfect.
Johnston411 said:
I'm using this on my vario II and no matter what i set my delay to it changes back from custom to default after i've used an app or even change to a different tab on htc home.
Is there a fix?
Click to expand...
Click to collapse
I have got the same problem.
The same problem also occurs when I edit this register file:
HKLM\System\State\Phone\Current Operator Name
Has someone a solution/fix. Thanks in advance!
I reinstalled it to device and that seemed to fix iy for me
Wow
Good work
Hi all,
I'm a total noob that needs a little help.
I'm excited to find and try this file on my new HTC touch.
Can you tell me how I install after I unzip the file?
Thanks in advance, --Ray.
Undo the name change
How does one undo the name change? through registry only?
CEPi said:
How does one undo the name change? through registry only?
Click to expand...
Click to collapse
I haven't tried, but you could always uninstall the program.
Andych said:
I haven't tried, but you could always uninstall the program.
Click to expand...
Click to collapse
Which is..some kind a problem for me. I've been trying to uninstall OpMon, but had some funny problems. The lowdown:
1. Install in Device, works but opr. name keeps reverting back.
2. Decide to uninstall from Remove Programs, but says that it cannot be removed.
and "emunutz OpMon" remains on the remove programs list and on device.
3. Tried uninstalling with MemMaid, mentions that there is an error but I force uninstalled. Files & regs are gone (I think..) but OpMon still remain on the list!
Help?
ps. I've had this problem once with the HTC Diamond Keyboard circling around. Except that one didn't uninstall at all no matter what I try and had to HR.
Doesn't seem to work on Verizon. I have the settings confirmed and it still says Verizon Wireless.
great program been looking for it for sometime thanx
Hello,
Is there a way to keep the changes after turning off the device (HD) and even after SR?
Thanks!
I've decided that the original order of the Comm Manager is not quite good so i edited it a bit:
This is how it looks:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More Info:
Beam = Turn Beam ON/OFF
When On = your phone can receive/send files (Via BT) --> also more battery consuming when on.
When Off = Your Phone Can't.
3G:
On = 3G Mode.
Off = GSM Mode.
Download from here:
http://rapidshare.com/files/124019477/Nadavi_HTC_Diamond_-_NEW_CommManager.cab
Enjoy,
Nadavi
Well done! one less think for me to complain about lol
Whats the fastest way to get to com manager btw? Am i missing something but i have to click the top bar, then an icon, then com manager in the little notification?
ps. any change you could attach it here, i have 97 minutes before i can download from RS again
someone1234 said:
Whats the fastest way to get to com manager btw? Am i missing something but i have to click the top bar, then an icon, then com manager in the little notification?
Click to expand...
Click to collapse
Use your finger to scroll through the Settings tab (between weather and programs), then you can click on the Communication Manager. It's one step less than your method.
The new Manager looks nice, but what is there to 'beam'?
The only one I miss on the panel originally inside the oficial roms, is the possibility to cgange between 3G to GSM.
98% of the time, I only use GSM. Only when I need to navigate or make a video call, then I use 3G....otherwise it's useless, and battery consuming...
HastaSSSS
205_lacoste said:
The new Manager looks nice, but what is there to 'beam'?
Click to expand...
Click to collapse
I was about to ask the same thing...as far as i can see in the settings...theres the option to accept beams but you cant beam anything??. Does the Diamond come with an infra red sensor?? because i cant see any sensor on the side of the phone??
Otherwise that comm mananger looks really nice...ill be downloading it later and applying it to my Diamond
Oh you star! Well done, this is perfect for me as I have 3G in the park outside but not in the house so while it's always searching for 3G my GSM signal suffers.
Top marks to you.
205_lacoste said:
Use your finger to scroll through the Settings tab (between weather and programs), then you can click on the Communication Manager. It's one step less than your method.
The new Manager looks nice, but what is there to 'beam'?
Click to expand...
Click to collapse
Simply set the COMM Manager as one of your start menu items.
Then it's only Start Menu-> Comm Manager.
Beam = Turn Beam ON/OFF
When On = your phone can receive/send files (Via BT) --> also more battery consuming when on.
When Off = Your Phone Can't.
Nadavi
Nadavi said:
Simply set the COMM Manager as one of your start menu items.
Then it's only Start Menu-> Comm Manager.
Click to expand...
Click to collapse
Also two steps, just as mine, but even quicker. Visual "Disadvantage" is that you will go out of the TFL3D surrounding using the start menu
Beam = Turn Beam ON/OFF
When On = your phone can receive/send files (Via BT) --> also more battery consuming when on.
When Off = Your Phone Can't.
Click to expand...
Click to collapse
What is the added value over the Bluetooth ON/OFF setting? In other words, what can I do with bluetooth ON if i can't have data traffic.
cool thats what i'll do!
Still waiting for rapidshare to let me download :'(
Nadavi said:
I've decided that the original order of the Comm Manager is not quite good so i edited it a bit:
This is how it looks:
More Info:
Beam = Turn Beam ON/OFF
When On = your phone can receive/send files (Via BT) --> also more battery consuming when on.
When Off = Your Phone Can't.
3G:
On = 3G Mode.
Off = GSM Mode.
Download from here:
http://rapidshare.com/files/124019477/Nadavi_HTC_Diamond_-_NEW_CommManager.cab
Enjoy,
Nadavi
Click to expand...
Click to collapse
is there any other way to download the file??
alway cannot get it download
Finally got it
Bluetooth means turn bluetooth on, so if you have a headset for example that's already been paired it'll work.
Turning beam on means your device is discoverable, so something which hasnt already paired can see it. I guess its usefull to quickly turn on beam to grab something from a friend, then turn it back off again.
What software can they use to make this type of modifications
Ok, everything's clear now I've installed the app too as it looks like there are only benefits. It would be better if the flight mode would be available too. Now I turn flight modus on by holding the hang-up button.
Thanks for the little app!
Beautiful work. Thanks Navadi.
Thanks Nadavi for the efforts.....
And we can use advance config to arrange our own desired tab...
This all can also be done through Schaps. Advanced Config ...
aragornol said:
This all can also be done through Schaps. Advanced Config ...
Click to expand...
Click to collapse
10 cent's to you
You Welcome,
Nadavi.
thx a lot m8!
very nice mod
thx again!!!
aragornol said:
This all can also be done through Schaps. Advanced Config ...
Click to expand...
Click to collapse
...but without icons.
panosha said:
...but without icons.
Click to expand...
Click to collapse
You got it
Nadavi
This is the wireless router for wireless internet sharing that has been floating around. It is not working 100% on the TP2, however the basic functions do work.
Updated version can be found here http://forum.xda-developers.com/showthread.php?t=538874
What precisely did you find not working in this WiFi Router?
Additional button - Row
Hi At0mAng
Personally, I use the Microsoft Direct Push button/row so wouldn't want to loose it to this. Is there any possibility of making a version that adds an additional button to the Comm Manager?
Cheers
andrew-in-woking
If I have uesed the ruter it is inposible to get conect to internet after.
In the begining I thourgh it was low 3g /hi but I found if I conect my tp2 as a modem or use the ruter again, it is no problem surfing whit the computer but still not whit the phone.
Any out there who has a solution or an idea?
ka
eac said:
What precisely did you find not working in this WiFi Router?
Click to expand...
Click to collapse
From what I recall on the Touch Pro it was easier to start the router and did not have to enable the settings to automatically use the settings when starting. Othe than that it has been working well for me.
Yes I can make a version where direct push is left alonr or you can install this and use advance config to place direct push back on comm manager.
What's different from THIS version? That version works just fine on my Vario V.
Don't have the CommManager link but it works just fine running it from the connections tab.
works nice!!!
thanks you very much i really
will use this!!
- Not found 3g connection. Only slow GSM.
- Delete Direct Push button, not adds an additional button to the Comm Manager
0n my tp the app dosent start from the com manager - i thought it didnt install until i found it in a new folder within the programs folder called network center...
so, when i start the app its interface is too tall for the tp - the checkbox is below/behind the software keyboard icon...
so,i dont knnow how to get it to work since what i see is so different from the instructions. can someone offer any guidance? seems t me that the wifi chip needs to be on but it keeps finding available networks and th wifi router doesnt seem to do anything.... yep, am having issues!
Be sure to install it on the TouchPro2, not TouchPro. Even though I think it could work on both VGA and WVGA.
You could give some more information about your device or provide a screenshot.
@general
I've created a Dutch HERE version from wich is a Hybrid from 0.9.2 and 1.0.0.
Already asked what the differences are compared to the file in the first post but so far no response yet. Previous thread can be found HERE.
V1.0.0 can be found HERE.
mccune said:
Be sure to install it on the TouchPro2, not TouchPro. Even though I think it could work on both VGA and WVGA.
You could give some more information about your device or provide a screenshot.
@general
I've created a Dutch HERE version from wich is a Hybrid from 0.9.2 and 1.0.0.
Already asked what the differences are compared to the file in the first post but so far no response yet. Previous thread can be found HERE.
V1.0.0 can be found HERE.
Click to expand...
Click to collapse
I am not sure what the difference is. I would guess it is no different since everyone is getting the package from the same place...
At0mAng said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the wireless router for wireless internet sharing that has been floating around. It is not working 100% on the TP2, however the basic functions do work.
The following CAB will also place the WiFi Router on the Comm Manager, it will replace Microsoft Direct Push.
Please follow instructions for it to work properly:
Install At0mAng WiFi Router.cab
Restart your phone
Open Comm Manager
Tap where it reads Internet Sharing to bring up WiFi Internet Sharing, if you tap the On/Off button it will bring up the USB Internet Sharing
Set the Router name and password you would like.
Set the option to always use these settings without asking
Close WiFi Router
Go back to Comm Manager
Restart WiFi Router
You should be able to connect now.
Click to expand...
Click to collapse
Hi At0mAng
Could you please post your comm manager registry entries/files so we can edit it manually?
Many thanks
andrew-in-woking
i don't get this.. do i have to install a programm to profit from the internet from my home router with my htc touch pro 2(coming thursday)?? on my siss' iphone she doesnt have to..
xdadJeroen said:
i don't get this.. do i have to install a programm to profit from the internet from my home router with my htc touch pro 2(coming thursday)?? on my siss' iphone she doesnt have to..
Click to expand...
Click to collapse
No, the phone has WiFi that should work fine with your home router. This program turns your phone into a WiFi router, so you can connect a laptop to your phone (by WiFi) and get internet access for the laptop when away from home.
Gordon
and why not just use WMWIFIrouter? does it do the same thing where the data will not be read as tethering?
julienrl said:
and why not just use WMWIFIrouter? does it do the same thing where the data will not be read as tethering?
Click to expand...
Click to collapse
this one is free thats why
redd214 said:
this one is free thats why
Click to expand...
Click to collapse
oh... i like that! lol
Does it provide the tethering charge workaround too? and does it have a crash cleanup? (TP2 is in the mail so I can't test )
When I change the settings, set always use and close, on returning the settings have gone back to default.
How do I change the settings permanently?
A new version is out in the Development and Hacking forum that resolves some issues of this one.
Look for a post by Noonski.
andrew-in-woking said:
Hi At0mAng
Could you please post your comm manager registry entries/files so we can edit it manually?
Many thanks
andrew-in-woking
Click to expand...
Click to collapse
Here you go...
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager]
"SupportedFunctions"=dword:00000008
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\6]
@="Bluetooth"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\7]
"Execute"="\\Windows\\repllog.exe"
@="AUTD"
"ExecuteCommand"="//remote"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\5]
"Execute"="\\Windows\\WiFiNetwork.exe"
@="WLAN"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\4]
"Execute"="\\Windows\\CMInternetSharing.exe"
"ExecuteCommand"="cplmain 50"
@="InternetSharing"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\3]
"Execute"="\\Windows\\ConnectionSetup.exe"
@="DataDisconnection"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\2]
@="3G"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\1]
"Execute"="\\Windows\\CMPhone.exe"
@="Phone"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\0]
@="FlightMode"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\BCMSDDHD1"
[HKEY_LOCAL_MACHINE\Software\HTC\CommManager\DataDisconnection]
@="DataDisconnect.exe"
I'm a Windows Technician for PC, this is the first time I have jumped into the world of Windows Mobile. I bought a Imagio with Windows 6.5 from Verizon wireless and I'm trying to clean it up as much as possible "like I would my pc" and hopefully extend the life of my battery in the process. I installed SKTools and so far I have managed to lower memory usage to 50 %
Windows Start-UP
poutlook.lnk;1
BTTrayCE.lnk;2
LaunchGettingStarted.lnk;3
DelWMPTempFolder.lnk;4
PKG.lnk;5
HTCStartUp.lnk;6
Voice Command.lnk;7
RunCC.exe;0
BootLauncher.exe;0
TimeWizard.exe;0
SetIntoTodayRegFlag.exe;0
mflo_starter.exe;0
connmgr.exe;0
shell32.exe;0
sdpready.exe;0
tskschedule.exe;0
autotimeupdate.exe;0
ciphase2.exe;0
coldinit.exe;0
services.exe;0
gwes.exe;0
uptimesqm.exe;0
TimeWizard.exe;0
initvmmap.exe;0
device.exe;0
Services
USSD;Started;APP8:
Power Service;Unknown;AP16:
WLMService;Stopped;WLM0:
HTC Application Service;Started;HAP0:
HTCSipSrvc;Unknown;HSS0:
HTCGeoSrvc;Started;HGS0:
htcDevService;Started;HDS0:
HTCVolumeControl;Started;VOL0:
Data Call Entry;Unknown;AP23:
CM Guardian;Unknown;AP22:
htcStartMenuService;Started;EMX0:
AGPS notification service;Started;GPP1:
CLL;Started;CLL0:
App Service;Unknown;APP1:
Notification Manager;Started;NTF0:
PhoneExt Service;Unknown;AP18:
Bluetooth Profiles;Unknown;BTP1:
dald;Started;DAL2:
HtcServices;Started;HSV2:
wm_vnic;Started;FLO0:
smarttouch;Started;SMT1:
Bluetooth Audio Gateway;Stopped;BAG0:
Software Disable Dialog Service;Unknown;SDD0:
Software Management service;Unknown;SWM0:
Certificate Enroll Engine;Stopped;CES0:
regextdev;Started;SNA0:
DPT;Started;DPT0:
OBEX;Stopped;OBX0:
LAS;Started;LAS0:
CredentialManager;Started;CRD0:
NOTIFY;Started;NFY0:
Microsoft My Phone;Unknown;SBB0:
Bluetooth HID Loader;Started;BHL0:
sqmsvc;Started;SQM0:
Any input on any unnecessary Item above is much appreciated!
Push internet
I didn't see it there. did you disable it too?
Push Internet
I have disabled push mail for Outlook at Comm Manager, is this is what you refer too then yes.
Thanks
bastukee said:
I have disabled push mail for Outlook at Comm Manager, is this is what you refer too then yes.
Thanks
Click to expand...
Click to collapse
Push internet was a new feature introduced that made it so pages you specify on the internet tab would automatically be downloaded in the background according to a schedule. When you visit the link on the internet tab, you bring up a cached (and reasonably updated based on schedule) version that loads much faster.
Disabling push internet disables your phone from downloading the pages, which results in better battery (less data transfer) and more memory (less instructions sitting in memory.)
So what have people been disabling...please specify the file instead of telling me like push internet..cause there isn't a file that says push internet. I've been trying to figure out what services, and startup programs I can do without. Thanks in advance!
Seems like a tons of crap in there: I'm no expert but
Windows Start-UP
poutlook.lnk;1
BTTrayCE.lnk;2
LaunchGettingStarted.lnk;3 Delete
DelWMPTempFolder.lnk;4 Delete
PKG.lnk;5 Delete???
HTCStartUp.lnk;6
Voice Command.lnk;7 Delete
RunCC.exe;0 Delete
BootLauncher.exe;0
TimeWizard.exe;0
SetIntoTodayRegFlag.exe;0 Delete ???
mflo_starter.exe;0
connmgr.exe;0
shell32.exe;0
sdpready.exe;0
tskschedule.exe;0
autotimeupdate.exe;0
ciphase2.exe;0
coldinit.exe;0
services.exe;0
gwes.exe;0
uptimesqm.exe;0
TimeWizard.exe;0
initvmmap.exe;0
device.exe;0
Services
USSD;Started;APP8:
Power Service;Unknown;AP16:
WLMService;Stopped;WLM0:
HTC Application Service;Started;HAP0:
HTCSipSrvc;Unknown;HSS0: Delete
HTCGeoSrvc;Started;HGS0: Delete
htcDevService;Started;HDS0:
HTCVolumeControl;Started;VOL0:
Data Call Entry;Unknown;AP23:
CM Guardian;Unknown;AP22:
htcStartMenuService;Started;EMX0: Delete
AGPS notification service;Started;GPP1:
CLL;Started;CLL0:
App Service;Unknown;APP1:
Notification Manager;Started;NTF0:
PhoneExt Service;Unknown;AP18:
Bluetooth Profiles;Unknown;BTP1:
dald;Started;DAL2:
HtcServices;Started;HSV2:
wm_vnic;Started;FLO0:
smarttouch;Started;SMT1:
Bluetooth Audio Gateway;Stopped;BAG0:
Software Disable Dialog Service;Unknown;SDD0:
Software Management service;Unknown;SWM0:
Certificate Enroll Engine;Stopped;CES0:
regextdev;Started;SNA0:
DPT;Started;DPT0:
OBEX;Stopped;OBX0:
LAS;Started;LAS0:
CredentialManager;Started;CRD0:
NOTIFY;Started;NFY0:
Microsoft My Phone;Unknown;SBB0:
Bluetooth HID Loader;Started;BHL0:
sqmsvc;Started;SQM0:
Thanks player911...if anyone can add to his list it would be greatly appreciated...especially the startup stuff!!
how can I add an .exe start up when the Imagio turns on
slumpey326 said:
how can I add an .exe start up when the Imagio turns on
Click to expand...
Click to collapse
Using Touch Commander you can select the exe file then go to File and >>>>>>>>> on the menu. Pick Create shortcut. Click on Tree and browse to \Windows\Startup and say OK. You now have a shortcut (.lnk file) to that exe in the Startup folder which will start on next boot.
player911 said:
Seems like a tons of crap in there: I'm no expert but
Windows Start-UP
poutlook.lnk;1
BTTrayCE.lnk;2
LaunchGettingStarted.lnk;3 Delete
DelWMPTempFolder.lnk;4 Delete
PKG.lnk;5 Delete???
HTCStartUp.lnk;6
Voice Command.lnk;7 Delete
RunCC.exe;0 Delete
BootLauncher.exe;0
TimeWizard.exe;0
SetIntoTodayRegFlag.exe;0 Delete ???
mflo_starter.exe;0
connmgr.exe;0
shell32.exe;0
sdpready.exe;0
tskschedule.exe;0
autotimeupdate.exe;0
ciphase2.exe;0
coldinit.exe;0
services.exe;0
gwes.exe;0
uptimesqm.exe;0
TimeWizard.exe;0
initvmmap.exe;0
device.exe;0
Services
USSD;Started;APP8:
Power Service;Unknown;AP16:
WLMService;Stopped;WLM0:
HTC Application Service;Started;HAP0:
HTCSipSrvc;Unknown;HSS0: Delete
HTCGeoSrvc;Started;HGS0: Delete
htcDevService;Started;HDS0:
HTCVolumeControl;Started;VOL0:
Data Call Entry;Unknown;AP23:
CM Guardian;Unknown;AP22:
htcStartMenuService;Started;EMX0: Delete
AGPS notification service;Started;GPP1:
CLL;Started;CLL0:
App Service;Unknown;APP1:
Notification Manager;Started;NTF0:
PhoneExt Service;Unknown;AP18:
Bluetooth Profiles;Unknown;BTP1:
dald;Started;DAL2:
HtcServices;Started;HSV2:
wm_vnic;Started;FLO0:
smarttouch;Started;SMT1:
Bluetooth Audio Gateway;Stopped;BAG0:
Software Disable Dialog Service;Unknown;SDD0:
Software Management service;Unknown;SWM0:
Certificate Enroll Engine;Stopped;CES0:
regextdev;Started;SNA0:
DPT;Started;DPT0:
OBEX;Stopped;OBX0:
LAS;Started;LAS0:
CredentialManager;Started;CRD0:
NOTIFY;Started;NFY0:
Microsoft My Phone;Unknown;SBB0:
Bluetooth HID Loader;Started;BHL0:
sqmsvc;Started;SQM0:
Click to expand...
Click to collapse
Sorry for the stupid questions, but I am no where near the level of computer knowledge some of you guys have so be patient.
1) when looking for these programs, are you finding them in the file explorer?
2) if they are deleted, are then gone for good. I would hate to get rid of something and then realize I needed it cause if I screw it up, there is no way I am fixing it right back like some of you guys or gals can do.
My imagio though was running around 60% when I had sense UI on it, but with the HTC touch flo home screen on, it is running around 70-80% so getting it down will be a big help.
Thanks in advance.
player911
I have deleted the Items you have recomended on my start up and it works good so far.
I Googled the services you have recommended and they seem to be of use, "I'm no expert on them" so I have left them for the time being.
psalm462
I being using SKTools, is basicly a full suit of diferent tools, including one I would say resembles msconfig from Xp/Vista/Win7 where you can disable items and re-enable them in case you need too. I disabled TouchFlow and the TV Icon thing and that alone freed about 20% of memory.
Here is what I have. Even with Shozu running, I am running at about 57-60%
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Very difficult to follow your list by Images
I have lowered my Memory usage to 41 % upon boot with these 2 cabs, I can confirm they work good on my Imagio.
http://forum.ppcgeeks.com/showthread.php?t=85996
Original and More tweaks
http://sskusers.net/support/showthread.php?t=149
I cant get sktools to install keeps telling me it is not a pocket pc app and yes I checked to ensure I dl the wm6 ver.Any ideas?
Not sure, but I can think of a few things. How are you installing it? Did you get the .cab for SKfile or a exe? Also I suggest updating your .Net Framework to version 3.5
http://rapidshare.com/files/123693999/NET_CF_3.5.7283.cab
I have 3.5 running thx.What the message tells me is that I dont have a PPC.Strange
It says "sksetup is not a valid Pocket PC application. I have dl the wm ver from the sk web site
randcool said:
It says "sksetup is not a valid Pocket PC application. I have dl the wm ver from the sk web site
Click to expand...
Click to collapse
Make sure it's for PocketPC (touchscreen) and not Smartphone (non-touchscreen).
supertrac said:
I didn't see it there. did you disable it too?
Click to expand...
Click to collapse
There isn't Push Internet on the Imagio, it is only on the TP2.
Not sure what I am doing wrong but when I dl the WM 6 ver it still says Not the ver for a ppc I know I am missing something but don't know what it is.
My Leo just cant get my tap right... it's liitle bit to the left ?
Where I can find the screen alignment menu ? seems to be deleted in HD2..
PLS HELP !!
All settings ---> System ----> screen
xardus said:
All settings ---> System ----> screen
Click to expand...
Click to collapse
or more like Start Menu> settings> Menu> All settings.
Xeon said:
or more like Start Menu> settings> Menu> All settings.
Click to expand...
Click to collapse
Thanks..,,,, I was looking for Icon ....
Is there anyway to reset it back to default settings?
Rossimac said:
Is there anyway to reset it back to default settings?
Click to expand...
Click to collapse
If anyone got a solution for this, please let it know!
I think there is no "default setting". First time when flash it will prompt to set screen alignment.
Is there no screen alignement at the first startup of the HD2
xardus said:
All settings ---> System ----> screen
Click to expand...
Click to collapse
Xeon said:
or more like Start Menu> settings> Menu> All settings.
Click to expand...
Click to collapse
Guys I dont have this option under the specified location.
I have the Tmobile HD2 which I got today morning.
Does anybody else having this issue.
Plz help.
I tried looking under the windows folder for a "screen alignment" or "alignment" application. No luck!!
Anybody else having this issue or is it just me.....
Arite....no luck...
I am returning my phone....
Sticking with TP2 till my service renewal....
DesperateScorpion151 said:
Guys I dont have this option under the specified location.
I have the Tmobile HD2 which I got today morning.
Does anybody else having this issue.
Plz help.
Click to expand...
Click to collapse
Go to the settings tab and click the menu option (bottom right), which will be either "Menu" or "More" (I think they're the only 2 options). Then select "All settings" (the only menu option), System, Screen and finally the "Align Screen" button.
It's annoying that HTC decided to mess with the settings icon in the start menu. Along with getting a proper task manager (drop-down in sense style) for switching tasks, one of the first things I did with my HD2 was to enable the REAL settings icon in the start menu. You can do that with BsB Tweaks now though. But I digress
Let us know how you get on.
johncmolyneux said:
Go to the settings tab and click the menu option (bottom right), which will be either "Menu" or "More" (I think they're the only 2 options). Then select "All settings" (the only menu option), System, Screen and finally the "Align Screen" button.
It's annoying that HTC decided to mess with the settings icon in the start menu. Along with getting a proper task manager (drop-down in sense style) for switching tasks, one of the first things I did with my HD2 was to enable the REAL settings icon in the start menu. You can do that with BsB Tweaks now though. But I digress
Let us know how you get on.
Click to expand...
Click to collapse
TMo USA HD2's don't have that item! I agree with other poster that we have been left out of that feature!
Can anyone tell me what file the icon points to so I can see if maybe Tmo USA just didn't give us an icon on the system screen?
Thanks,
Gordo
screen settings (and indeed any control panel items) arent files you can point a direct link to.
If you really can't find the screen options, then you can make your own link, the code is
24#ctlpnl.exe cplmain.cpl,7
paste into a notepad doc on the pc, save it, (example align.txt) change the align.txt to align.lnk , move the file to your phone and run it.
Better still read THIS for how and why.
samsamuel said:
screen settings (and indeed any control panel items) arent files you can point a direct link to.
If you really can't find the screen options, then you can make your own link, the code is
24#ctlpnl.exe cplmain.cpl,7
paste into a notepad doc on the pc, save it, (example align.txt) change the align.txt to align.lnk , move the file to your phone and run it.
Better still read THIS for how and why.
Click to expand...
Click to collapse
And that damn fine thread comes to the rescue yet again! We need a superman logo smilie for when anyone mentions that thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hah, nice.
edit - just tried to see thru the neighbours bedroom curtains, seems x-ray vision doesn't come as standard.
samsamuel said:
screen settings (and indeed any control panel items) arent files you can point a direct link to.
If you really can't find the screen options, then you can make your own link, the code is
24#ctlpnl.exe cplmain.cpl,7
paste into a notepad doc on the pc, save it, (example align.txt) change the align.txt to align.lnk , move the file to your phone and run it.
Better still read THIS for how and why.
Click to expand...
Click to collapse
Fantastic! Thanks, it worked!
Gordo
Ahh, thank goodness. My screen alignment was driving me crazy, and of course, having a weird Tmous phone, the setting was nowhere where one would expect it to live in WinMo. You just made my phone 100% more lovable.
I have a problem with my screen alignment although I'm not sure it's the same problem as above.
Since updating my phone to the latest official ROM yesterday my home screen has shifted up by about 3mm.
My network indication is now partially hidden by the Start and notification bar at the top and a small strip of the basic WinMo wallpaper is visible below the Home/People/Messages/etc bar at the bottom.
Any suggestions?
The screen option in settings is hidden on the T-Mobile HTC HD2. You can make it visible in the registry
HKEY_LOCAL_MACHINE\ControlPanel\Pen
Set the value of "Hide" to 0 (currently it is 1). Then the screen option will be visible in the system folder under all settings.
hopes it helps