Ive tried to connect my Hero to my laptop to use it as a modem, but it isn't working. Ive tried to enable mobile network and internetsharing. Looks like I don't have the NDIS driver. How do I fix this. I have the newest version of htc sync.
Hi Killbox,
I tried for hours and hours to get it to work and couldn't so I gave up in the end.
I tried every driver I could, everything was set up to sync properly on my phone/laptop, NDIS driver installed. No joy.
Try getting hold of the WiFi Tether .apk file and install it on your Hero.....or install Modaco's Custom Hero Rom on your phone. It has WiFi Tether included and it's a damn quick rom
It's a piece of cake to use. Once installed on your phone, fire up the app and 'Start Tethering'. Once running, see if your PC will pick it up as a wireless network point. If it does, connect to it and you should be using your phones 3G network for the internet on your PC.
Job done!
killbox said:
Ive tried to connect my Hero to my laptop to use it as a modem, but it isn't working. Ive tried to enable mobile network and internetsharing. Looks like I don't have the NDIS driver. How do I fix this. I have the newest version of htc sync.
Click to expand...
Click to collapse
If the NDIS driver isn't loaded, you will have a device called "Android Phone" in Device Manager. You need to manually update the driver with the NDIS driver, which can be found wherever you installed HTC sync (in my case, C:\Program Files\HTC\HTC Driver\Driver Files\Vista_x86).
Regards,
Dave
I tried to reinstall the driver from device manager by choosing update manually. It said the newest driver was allready installed. I tried to install Modaco, but I just got error messages so I gave up. Is it really impossible to share internet?
Works fine here with orange updated Rom, do what Dave said, as I couldn't get it to work until I went rooting around the HTC folder, 1 thing though my HTC sync never works unless I reboot my phone and sync straight after startup.
Now I have installed the Modaco rom, but it still won't work. Have tried to update the driver in the device manager without success. The tether program won't work either.
Im using PDANet 1.16 with Android for tethering, works flawlessly, give it a try.
Related
Setup: Stock Cingular 8125 WM5, Vista Home Premium 32bit
I've had no problem with in the past getting my Cingular 8525 to tether with any XP machine. However, Vista is proving to be even more worthess than XP as I imagined it would. WMDC works fine a side from it too being even more worthless than it's predecessor, as I can't even remote sync over a secure VPN anymore.
I have read and installed the drivers located both:
http://forum.xda-developers.com/showthread.php?t=288753
and
http://www.terranettech.net/DisplayPg.aspx?codeid=1128
Neither works solution...
With WMDC disabled I activate the Wireless Modem connection. Vista detects a new USB device at that point and starts looking for a driver.
It comes back saying it could not find a driver, and I click a button to specifically tell it what driver to use. I've tried both drivers listed in both URLs. Neither are accepted. I'm told "The folder specified does not contain a compatible software driver for your device."
For the record, the driver on the CD didn't work either (different message, something along the lines of "failed to install driver").
If I go into Device Manager and "Update Driver" (no driver is installed, Update is used whether no driver yet or really updating) and let Vista try to find it itself it says "The best driver for your device is already installed.", which is "Unknown Device".
Any ideas? I've seen people claiming they got their 8525 to tether with Vista using the modified driver. On my end it does not work though.
No ideas? Is there another place I should post this instead?
this may help
For anyone having trouble getting their laptop to recognize the 8525 as a modem this may be the solution.
http://www.terranettech.net/DisplayPg.aspx?codeid=1128
my phone was working fine but when I tried to set my wife's up to tether it wouldn't show new hardware found when plugged in and when I tried to manually install the driver the process box just kinda stalled out and wouldn't go forward with the driver even though I had browsed to the right one. I had to uninstall the driver which was viewing the phone as a serial device. if you're having this trouble then try following the link above...
Hi,
Previously I was running Black 3.0 and was synching with Vista and had no problems.
I recently updated the ROM to Black Satin and now I cannot sync.
When I connect the device to my computer it initially recognises it and gives an option to create a partnership but then it disappears and it says that no device is connected.
Does anyone have an idea of what could be wrong or of ways of fixing it?
Thanks.
Also..
I have followed the guide here http://www.mrvanx.org/hermes_guide/vista/index.html for vista and I get an error installing the drivers (error attached).
I have also turned off advanced usb networking..
spathi said:
Hi,
Previously I was running Black 3.0 and was synching with Vista and had no problems.
I recently updated the ROM to Black Satin and now I cannot sync.
When I connect the device to my computer it initially recognises it and gives an option to create a partnership but then it disappears and it says that no device is connected.
Does anyone have an idea of what could be wrong or of ways of fixing it?
Thanks.
Click to expand...
Click to collapse
First, be sure you're running the latest WMDC 6.1. Then reboot both the computer and the device. If that doesn't fix it, click on Start -> Settings -> Connections -> USB to PC and check or uncheck "Enable advanced network functionality".
Then... report back.
yup I have done all that
Rebooted about 20 times (pc+device) even tried reflashing different roms but still no go!
Have unchecked advanced networking..
Make sure you have the right driver from VistaRUU.zip floating around. I did these exact steps last night and am also running Black Satin. I don't have a problem. Be sure to re-check the box that says allow USB connections.
Good luck. Try going over all the steps in case you might have missed something.
Spathi, in your case, you may just need to re-download the Hermes USB drivers.
P.S. I did also update my SPL to HardSPL2.0
I have tried installing the drivers numerous times.
I have tried the drivers from here http://forum.xda-developers.com/attachment.php?attachmentid=33892&d=1170385335 and here
http://mahmood1.com/Documents/64bit.rar
I am on 64bit Vista and have downloaded the 64bit drivers and turned off driver signing..
My phone has SPL 2.10lipro which I believe is the latest?
spathi said:
I have tried installing the drivers numerous times.
I have tried the drivers from here http://forum.xda-developers.com/attachment.php?attachmentid=33892&d=1170385335 and here
http://mahmood1.com/Documents/64bit.rar
I am on 64bit Vista and have downloaded the 64bit drivers and turned off driver signing..
My phone has SPL 2.10lipro which I believe is the latest?
Click to expand...
Click to collapse
i had the same problem a little while ago. search my user name for posts and you'll find the thread. but the solution was... uninstall wmdc reboot, and download and reinstall. works like a charm.
I HAD the same problem.
OK.. I had the same problems, troubleshooting with MS for $35.00 didn't solve it. The one thing that did solve it is kind of ridiculous and easy.. So here's the solution..
It turns out Vista has issues with detecting USB drivers on certain types of chipsets. It looks like the USB ports are correctly installed, but it just doesn't like the devices (like Smartphones) connected to it.
I solved the problem by buying a USB card with a VIA chipset. It's amazing how well it works now. Of course, I discover this AFTER a reinstall of Vista and everything else.. Duh! Ugh!
Hope this helps other people feel less pain.
-Percy
I have tried the uninstall/reinstall thing before (just tried it again) no luck there.
I just tried another usb card and that didnt work either.
Only thing I haven't tried is reinstalling windows...
mine is more weird
upgraded from wmdc 6.0 to 6.1.6965 now when it bootloader, wmdc doesn't even connect at all. even return to wmdc 6.0 doesn't solve the problem
There are a couple of things with Vista..
I figured out these few little nuggets during my travels..
1. Make sure you have all the newest updates. (MS apparently knows of this problem as they have released a patch to resolve some USB issues)
2. The external USB Card you try has to have the VIA USB Drivers.
3. Update your bios to something newer (also a big problem)
4. Turn on Legacy Support for USB (important too)
5. Disable your ACPI if you're having troubles.
6. Have you tried connecting the device directly to the MOBO USB Ports?
I can't stress this enough.. the VIA USB Chipset seems to work so if you try an external card, make sure it has a VIA chipset on it. They're completely different than the standard Vista USB Drivers.
For those that are having problems - check on your desktop system in the device manager to see if you have the "Microsoft Remote Mobile Adapter" installed as a network card. If you do, uninstall it. This driver gets in the way of the WMDC 6.1 connection with USB.
It apparently gets loaded if you attach your device while having "advanced networking" enabled in the PC->USB setup on the device. Once you've done that, you're stuck. Turning off the "advanced networking" on the device won't help, because that remote driver is already loaded. You need to disconnect your device, unstall that driver, be sure "advanced networking" is turned off, and then connect your device again. I've had this happen a couple of times to me after re-flashing the ROMs.
Brian.
I've been searching a lot about this and just can't figure it out... I can sync my tytn (8525 as I call it) with windows media player, but can't do it with "windows mobile device center". Actually, everytime I click on wmdc, it opens up the "Change Connections SEttings" where it says "Device Connected" up top but then I click on ok and apparently nothing happens...
Had a search and found 1 or 2 things but they never worked for me. Anyway I have complied this driver for Windows XP so all you need to do is add it to your Internal Storage, plug it in to your computer copy it to your PC, then set your phone to internet sharing. When it moans that it dosn't know where the driver is, point it to them and it should work.
I just tested it on an XP machine and it worked so hopefully it will work for you.
If there is already a solution for this please let em know.
Mirror:
http://rapidshare.com/files/163465025/Remote_NDIS_based_Internet_Sharing_Device.zip
This worked for me...Thanks!
This work for me... its great...
4.2.6 USB tethering
I downloaded the drivers but don't know where to put them. I think I'm not doing something right.
1. Plug in phone via USB (dont' have "Wireless tether for root users running")
2. settings / wireless controls/ "click" internt tethering
3. go to PC and wireless network connections, select G1Tether and click connect. it will not connect
is this a driver problem? do i need "wireless tether for root users" running?
help
thanks... vista and windows 7 has the drivers inbuilt but not for windows xp..
Driver works on Magic 32A with SuperD 1.5.1, WinXP SP2.
Thank you very, very much
Maciek.
Worked beautifully for me!
Worked great for me!
Thanks,
Ambarish
I cannot get these drivers to work. I'm using an xp machine and every time I turn on the usb tethering, it automatically installs drivers identified as "HTC remote ndis remote device" and it has a big yellow ! next to it. I tried pointing at your folder for the device wizard and it says it couldn't locate better drivers to install. What am I missing here?
I have the same issue with you, waiting for the solution.
Cipherpunk said:
I cannot get these drivers to work. I'm using an xp machine and every time I turn on the usb tethering, it automatically installs drivers identified as "HTC remote ndis remote device" and it has a big yellow ! next to it. I tried pointing at your folder for the device wizard and it says it couldn't locate better drivers to install. What am I missing here?
Click to expand...
Click to collapse
Try tell it that you will select the driver manually. Then click the "Have Disk" button and point to the inf of this driver. That should install it regardless of what Device Manager thinks is the best drriver.
Been having trouble getting wired tether to work also. In device manager I had a yellow "!" sign on USB composite device, installed the driver from this thread and the caution sign disappeared - still no tethering though
I suppose I'll just have to make do with wireless tether.
when I point that file as the driver it tells me it isnt for that device.
Connect your phone, then when it says it has found new hardware but cant install it, go to the device manager, double click the and click reinstall driver.
Point the folder to where ever you saved the driver too and it should install.
Anthony2oo5 said:
Connect your phone, then when it says it has found new hardware but cant install it, go to the device manager, double click the and click reinstall driver.
Point the folder to where ever you saved the driver too and it should install.
Click to expand...
Click to collapse
That fixed it for me. Thanks.
Works
Worked for my Nexus 1 Cyanogen 5.0.5
Thanks to you for posting this and to the user who posted the info about vista and 7 having the driver already. I was scratching my head as to why this worked on my home laptop (vista) and not my work laptop (xp).
i got an old fossil
Windows 2000.....is this possible?
Thanks you! Something that finally works!
I have a question. My PC at work still has its normal LAN connection through a network card. Now I have this second connection through my G1. If I make a web request with Firefox, which connection will it use? Do I have to disable the LAN connection to guarantee that it uses the G1? Or is there someway to make Windows default to the G1 if it's attached, and use the LAN otherwise?
Works for USB tethering using Android 2.2 (Froyo) and Windows XP
Thanks for the driver. FYI I was able to use it with Android 2.2's built-in USB tethering and Windows XP SP3.
Unrooted Nexus One with stock Android 2.2 (Froyo)
this worked for me, thanks!
xp sp3+moto droid (rooted)+cm5.0.6.2
Anthony2oo5 said:
Had a search and found 1 or 2 things but they never worked for me. Anyway I have complied this driver for Windows XP so all you need to do is add it to your Internal Storage, plug it in to your computer copy it to your PC, then set your phone to internet sharing. When it moans that it dosn't know where the driver is, point it to them and it should work.
I just tested it on an XP machine and it worked so hopefully it will work for you.
If there is already a solution for this please let em know.
Mirror:
http://rapidshare.com/files/163465025/Remote_NDIS_based_Internet_Sharing_Device.zip
Click to expand...
Click to collapse
"all you need to do is add it to your Internal Storage" The file you posted is to get the driver on your computer working, right? Am I copying ANY file at all to the phone or?
Hi,
It seems that I've searched everywhere and tried everything, but I'm unable to get USB tethering to work.
Please correct me if I'm wrong, but this is my understanding of how it should work between Windows 7 64bit and Typhoon's CM7 Android running on the HTC HD2:
Phone Side:
Wired tethering is already available as an option, so simply enable USB tethering by ticking Settings -> Wireless and network settings -> Tethering & portable hotspot -> USB tethering
Windows Side:
Install the correct ADB driver for the HTC HD2. Does this create a new network adapter? I'm assuming a internet connection starts automatically as soon as tethering is enabled on the phone (and this runs via the network adapter)
When I connect the phone via USB, windows is unable to automatically find a driver. Apparently windows already comes prepackaged with a RDNIS driver, but this doesn't seem to work. The phone shows up in device manager under "Other devices" and is listed as "ADB" with a yellow exclamation mark. Where do I find the correct driver to use, and what happens after I've installed the driver. Is it true that the process is automatic, or do I need to right click on the installed adapter and click connect?
Any assistance would be greatly appreciated,
Regards,
XA83
Hi guys. Would really appreciate some tips on this one.
Is nobody using USB tethering on Win7 64?
Regards,
XA83
Hey. I haven't been able to get native USB teathering to work. U can use a app to make it work that seems to be the only way as of now. If you search my posts I posted the apk file.
Sent from my HTC HD2 using XDA Premium App
In the past I've had to search on google for the ADB driver but cannot remember where i found it since I couldnt find it again but a friend just brang their desire hd over and windows 7 found the driver straight away, do u know anyone who would borrow u their android device?
dunno if this helps
http://developer.android.com/sdk/win-usb.html
Thanks for the replies.
I've already installed the Google USB driver (from the developer site listed above). The phone shows up and the ADB driver is installed.
I've also tried installing the wired tethering apk from google apps. It is currently at version 1.4.
HOWEVER, I still don't understand how this is supposed to work as the ADB driver is not listed under networking devices. Surely you need a network driver to able to establish a connection. What am I not understanding?
Regards,
XA83
Hey, just built a new PC for a friend and tried sharing my internet connection using easytether which didnt work because the pc didnt have the correct adb driver. My friend then installed HTC Sync (for her Desire HD) and windows found an adb driver in there. Now the native tethering & easytether on my phone works.
Now I'm not too sure if htc sync has ANYTHING to do with this, or if the driver was downloaded from her desire hd (usb was plugged in already) but I guess you could try downloading htc sync and see what happens.
Hi everyone
I installed Win8 a day ago.
However, I got in problem when I tried to configure my wireless internet, ZTE modem.
Device manager recognized "unknown devices", I installed all drivers needed, tried to add them manually, but no success.
I rollback to Windows 7.
Anyone has some tips?
you need to install with troubleshoot compatibility (right click on the file install).
but, then, metro apps don't work...
I will be happy, if someone can help whit that...
(sorry about the english)
Same problem here....
Sent from my GT-I9000 using XDA
Anybody worked it out yet?
Tried to install the drivers only, but it didn't work
i found a way to install zte modem drivers.. its actually there in windows update... u just need alternate internet connection... I used wifi while connecting my usb modem to my windows 8 laptop... then just go to device manager and right click on all devices which show driver error and select update driver... when prompted, select automatically find best drivers... it will install the correct drivers... but u'll need separate internet connection for a while to do this...
ii tried it.. but somehow it didn't work out. since i found out that i'm not limited in bandwith i'm tethering
Sent from my GT-I9000 using XDA
You can try the driver used to install the software to automatically update
You can try the driver used to install the software to automatically update