Hi all,
I got an HTC x7500 (ROM english version 1.07.0000) with crashes, i want to flash it with it's original ROM, i've already tried other but i always get the Error 294:Invalid Vendor ID. Could someone help me get the spl 1.07.xxxx?
Thanks!
Related
I attach the relevant files of the rom update utility for the HTC galaxy (Dopod p100). I appreciate help from those who already did work on "NO-ID" upgrades before... currently I would like to update a chinese machine with English rom. The attached brings the machine to bootloader but after few seconds stops and reports Invalid vendor...
I appreciate any help.
P.S. the complete image rom is in the FTP under upload/Dopod p100
Just received my Qtek G100, we need a new forum ;-)
I'm seeing some interesting stuff in the DopodP100 directory, including an ENG ROM, have you tried it ?
My ROM is ENG 1.00.06 ENG - no BT Headset profile :-(
Just received my Qtek G100, we need a new forum ;-)
I'm seeing some interesting stuff in the DopodP100 directory, including an ENG ROM, have you tried it ?
My ROM is ENG 1.00.06 ENG - no BT Headset profile :-(
Hi,
Do u still have the english rom?? Can u upload to the FTP site again?
Same problem Here
Have a P100 with chinese rom and have been looking for an english version for some time now, was able to find a Qtek G100 english rom, but it would give me a invalid ID message. Please, this is becoming a common problem..
Hello, my computer crashed whil i tryed to update ROM on HTC Herald. Now system is not loading, trying update it with ROM i have cause an error "Invalid Vendor ID". So i guess i need the correct ROM. Can somebody help me?
Btw, my device origin is italian. So i guess i need the italian ROM.
Or there is another way to update the ROM?
Hi! Have you resolved your problem? How?
I am in the same situation and looking for italian ROM.
Ciao
There is alreay A thread of someone who was looking for WM5 ITA ROM. But you will not find the original ROM on the internet. You could let someone make a dump for you, but you cannot use an RUU with a ROM dump. And since you have a brick, you can only access the bootloader. So you cannot flash your device. I suggest you wait for the official ROM from HTC, or send your device to HTC Repair Centre... I'm in the same situation (but i need the Dutch RUU) but i will wait for the official ROM!
Hello there!
First of all, please excuse my terrible english ... but I hope you can help me!
I unlocked my Athena reffering to this link ...
http://forum.xda-developers.com/showthread.php?t=315831
... and everything went well!
I installed this rom ...
http://forum.xda-developers.com/showthread.php?t=346221
.. and everthing was really awesome !
Then I noticed that the keyboard layout was qwerty .. and as I am a german I´d like to have qwertz ans so I installed this ROM:
http://forum.xda-developers.com/showthread.php?t=399938
Unfortunatedly I´ve chosen the wrong one (strange order of links) because after installing the rom The Device comes up with the warning descriped in the post ... and what´s worst and actually my Problem:
The device resets each time during the "customization", reboots and tries to do the custom again.
It resets even when I try to install another rom ... no tricolor screen or anything!
So the device is now running an unusable OS and I don´t know how to install a new one!
HELP ... I need somebody!
... solved!
found a solution here:
http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
.. or at least how to install a new rom!
http://forum.xda-developers.com/showthread.php?t=397518
you can find the links to the ATHENA ROM.
Other German ATHENA users could provide some help to set the Kb
Carefully chose the SPL version, 1.2 since you install AP4, after AP4 you will have the newly partitioned ATHENA, with SPL 3.5 (no way to flash any original HTC ROM or an 1.2 SPL ROM, a tool to revert it back is in developing stage)
Hi i'm sebastiano, can someone help me pls?
i've buyed an htc p3450 with windows 6 , but i don't know the id and other codes.
i only know theese: ipl 2.20.0002
spl 1.11.0000
this morning i tried to change original rom with onyx 5.6
i've made this things:
i've installed cert.spcs.cab and enablerapi.cab
after using ELF_USPL_2.26.0000 i made the procedure for charge rom
and all were ok.
after i used the new os and its worked good. i made an hard reset before using definitively it. but after 10 minutes the system didn't start yet.
It run the image of Tim Operator and shut down.
The boot loader work now. i tryed to reinstall the sistem, the procedure finish without problem but when the system try to initialize the new rom , display the tim logos and after shut down..
someone know what i do and why system not reboot?
i read that i need the original italian rom for retry all my operations..but i don't know hot to find the id of my precedent rom...
pls help me
What's your actual IPL/SPL ? (you can see it in bootloader)
ipl 2.20.0002
spl 1.11.0000
theese are now
Do you know if it Elf or Elfin (Elfin is double memory), it's important if you have to flash a rom. Here's a link for original roms http://forum.xda-developers.com/wiki/index.php?title=Elf_Upgrades , none is Italian.
tito12 said:
Do you know if it Elf or Elfin (Elfin is double memory), it's important if you have to flash a rom. Here's a link for original roms http://forum.xda-developers.com/wiki/index.php?title=Elf_Upgrades , none is Italian.
Click to expand...
Click to collapse
yes it's surely elf because on the box the name is htc p3450/3452 Ita S
so elf isn't S i think is the xl model
now i'm going out, but if you can help me to know what is the problem, tomorrow we can meet again
i want to remove tim's brand and i will put in a good rom with large buttons
see you bb and thanks
As far as I know xl is elfin, and if you flashed the wrong rom maybe that's why you got this problem. Anyway here's a link to a good friend who's probably more expert on Italian roms than me, Flaviopak, send him a pm http://forum.xda-developers.com/member.php?u=778494
good day to all, can anyone please help me in finding the original old stock rom of x01ht softbank?
all of the links available are no longer working as of what i've search. please help me anyone that has a working original rom
my problem is my htc x01ht (herm200)
HERM200
IPL-1.00
HERM200
SPL-2.03
i want to change language, then i got an error on hard-spl running 12% then error.
it is now hang in windows mobile logo. i try to hard-spl v9 it goes to 100% then displays error and saying that it is corrupted..
when using HARD-spl v7, i cannot detect it and error 260
tried also flashing other roms but sad to say, error 294 (invalid vender id)
so my only hope is to start back at the beginning, make the phone work again by flashing original stock rom of softbank..
i hope someone has it in their computers and please upload it then help me by giving here the link..
thank you very much. every help will be highly appreciated. thank you again.
eivelice said:
good day to all, can anyone please help me in finding the original old stock rom of x01ht softbank?
all of the links available are no longer working as of what i've search. please help me anyone that has a working original rom
my problem is my htc x01ht (herm200)
HERM200
IPL-1.00
HERM200
SPL-2.03
i want to change language, then i got an error on hard-spl running 12% then error.
it is now hang in windows mobile logo. i try to hard-spl v9 it goes to 100% then displays error and saying that it is corrupted..
when using HARD-spl v7, i cannot detect it and error 260
tried also flashing other roms but sad to say, error 294 (invalid vender id)
so my only hope is to start back at the beginning, make the phone work again by flashing original stock rom of softbank..
i hope someone has it in their computers and please upload it then help me by giving here the link..
thank you very much. every help will be highly appreciated. thank you again.
Click to expand...
Click to collapse
you will find it at ~ http://forum.xda-developers.com/wik...oader_1.04_and_get_a_INVALID_VENDOR_ID_error: