help me upgrade my hermès please !!! - 8525, TyTN, MDA Vario II, JasJam General

hi ! i'm serge and i would like someone to tell me how to upgrade my hermes under wm5 to wm6 as i didn' t succeed to make it ! i would like more information about this following phrase : (You need just the .nbh file from the WM6 package of your choice. Unfortunately they are built into Windows installers. I downloaded XDA-Live and extracted the .nbh file using Virtual PC.)
And what is the .nbh file ???

help me please

i've yet read all advice to succeed the upgrading

This will help you:
http://www.mrvanx.org/thg/
That site written by one of our Moderators here at XDA is as good a guide as you will find anywhere.
Nobody can really write a quick answer to your question, start small and do a lot of reading - and don't forget the Hermes wiki (see brown bar above).
.. but the Mrvanx site tells you all you need to know to carry out an upgrade. Just be sure you have hard spl installed if you don't want any fatal disasters to happen!!
Mike

Related

How to view extended rom on I-mate JAM?

could anyone tell me or direct me to a thread discussing how to view and edit Extended ROM on a I-mate JAM???
Thanks in advance
Run on your i-mate the file \windows\loadvdisk.exe and than your extended ROM will become visible in your file explorer.
Try to use the search option on this forum. This topic is discussed for some times I think.
Anyway enjoy it .... and keep on posting !!
Kind regards,
R.
hey - yes i found it myself...sorry for the inconvience
by the way...i have another question to ask - how do i unlock the extended folder? I have tried to search the forum but i can not seem to find any solutions...
Anyone?
are there nobody how knows how to unlock the extended folder? I need access to copy some new files and to delete others from the folder...
Please help!!
btw - i have an imate JAM!

A freshman need someone's help

I am a freshman of this forum.I want to cook my rom.Maybe someone cna say the tools is already exist.But the using of tools is not easy.I want to develop a easy use GUI tools.But I don't know the nba file's structure.does anyone can tell me or give me the article's link?
thx very much
You need to specify your device.
You need to read the wiki.
You need to find out who Itsme is, and read everything he's ever written, and check out his website.
Also check out Buzz's and Mamaich's rom tools. Both have source provided.
V
THX for reply I 'll search it

Question for Expert

Hi all,
After read lot of thread, I think the solution is very near for me. But I block in front of the last step...
I would like to run Blackberry Connect 4 on my Artemis (SPV M650)
I have read on the General Discussion the different solution.
Now I think I must change the Device-Type-String: HTC-Artemis to HTC-Hermes.
I have extract the ROM in NK.NBF file but after when I want use HTC64.exe for decoding the file...The message is : It is not for your phone and I don't find the string.
Please If I don't know how I can find the Type String on the Rom for changing the name
Thanks for your help
Zeb

HTC Galaxy WM6

Hello everyone,
I just wanted to ask if anyone is interested in helping me make a wm6 for htc galaxy (dopod p100, qtek g100, imate-pda-n). I have both the korean wm5 rom and the english wm5 rom. I've tried the hyperkitchen tools sadly with no success. I would really appreciate it if someone was to guide me or work with me in porting wm6 to the htc galaxy.
Thanks for reading.
Qaid313
anyone willing to help?
Hello all,
Ive spent the day playing with various tools, and I need some help.
There are 2 methods i am approaching this. The first was a method was mamaich tools where i was able to successfully extract imgfs_raw_data.bin
and imgfs_removed_data.bin. Sadly, after that point, when i try to dump the bin file, i am unable to dump it because i get a "unknown header type" error. So I reread the hypercore tools tutorial, and I was able to set it up correctly, but i am not able to dump the rom, I put the rom (ceos.nbf) into the source folder, but it says "the system cannot find the batch label specified-make sure you placed the (space, no words) in the "hypercore\extract\source" folder! " which i did. I am stuck from there. In terms of converting the ceos.nbf to a .nb file, the
htc64 tool doesnt work, either does the typhoontools nor does nb2nbf.exe work, so i guess im stuck unles someone knows how to work around these errors. I also used the "grab it" tool, which dumped the rom on the sd card (i have it if anyone wants to give it a try), but i have searched on what to do with the bin with no success, I also tried some tools with the dump, but again with no success, so i am asking anyone out there who knows the answers to these problems to help me out.
Greatly appreciated.
Qaid313
Hello,
735 views and no response, please anyone who can help please help.
Thanks
Qaid313
Sorry, I'm viewing this post and I'm very interested in it, but don't have the right know-how to help you (yes, I'm a lurker )
Good luck!
i viewed this post as i was curious as to what a HTC Galaxy is lol
Hi, I think this is impossible because there is no WM6 for any of these devices, and for you do that you have to make the drivers!
That is to much complicated to do, only the HTC is able to do that, if make something wrong your Pda don't work anymore!
But I have one with WM5 English and would like to translate to Portuguese but i don't find in the net the English version, where is the English version for download?
I want to translate for sell because i have one HTC P3600, but in English is more complicated to sell!
Thank´s in advance!
I'm also lurking on this topic. The only thing I can do to help is maybe extract my English ROM for you if you need it.
Making a WM6 ROM does sound hard to do, maybe it is possible to start with an exisitng WM6 update ROM from another HTC device.
It has been done on the Apache. It's possible.
Have you tried using the utilities by anichillus?
http://forum.xda-developers.com/showthread.php?t=325062
Looks promising for all HTC, except need to find the compatible versions.
Do let me know if it is possible.
Silly22 said:
.......lurking on this topic. The only thing I can do to help is maybe extract my English ROM for you if you need it......
Click to expand...
Click to collapse
can you upload the english rom somewhere to download ? PLEASE !!!!
I extarcted ROM from galaxy.
It is simplify to do using boot loader with r2sd command. image from sd works prefectly with standart tools.
the problem is in SPL that dosen't wont to load cookied image.

Can somebody...?

Hi! very sorry for a new thread, but it is very important for me. Can somebody to describe step by step in details what should I made when I want:
- to save my original Polaris ROM
- how can I recover it (in details, how by pdocread (on PC and PPC) and what should I made with raw files)
- to have a new ROM for example from BEPE
PLEASE!!!
I really shouldnt even reply to this, but since I am a nice guy read this:
http://forum.xda-developers.com/showthread.php?t=381600
you should really take the time to read through the threads or use the search function of this forum. You will be amazed how much info you can find...
Thank you
Of course, but my english is not so good and I can't found informations about how can I recovery my original ROM
did you even read that link that I directed you??? it has original ROMS in that thread. Use a page translator if that helps you. Everything you need is in that thread...

Categories

Resources