I'm using Miri WM 6.5 Manila 2.5 REV 6.
If I go to Start -> Lock, it works fine. But for Auto Lock (Settings -> Lock) it requires specifying PIN.
Is there a way to use Auto Lock in WM 6.5 without entering PIN/password to unlock?
kengkaj.s said:
I'm using Miri WM 6.5 Manila 2.5 REV 6.
If I go to Start -> Lock, it works fine. But for Auto Lock (Settings -> Lock) it requires specifying PIN.
Is there a way to use Auto Lock in WM 6.5 without entering PIN/password to unlock?
Click to expand...
Click to collapse
Did you try HDTweak yet? It has a setting for autolocking.
I have tested it and it works however, on mine there was a strange issue with the backlight where it wouldn't turn on after unlocking. I had to turn off the screen and then turn it on, then the backlight would come back. It's only a minor issue, but if you can live with it it'll be fine.
http://montecristoff.webs.com/hdtweak.htm
Many thanks. But I did not use HDTweak AutoLock option because of that very issue .
Don't understand why MS doesn't implement this simple functionality.
kengkaj.s said:
Many thanks. But I did not use HDTweak AutoLock option because of that very issue .
Don't understand why MS doesn't implement this simple functionality.
Click to expand...
Click to collapse
Hmm... give Slide2Unlock a try. It supports autolock, but it's also a separate app which means using it will cost you more memory than the built in lock. But if you are in desperate need for this functionality, give it a try and it might just work for you.
I believe the newest version is S2U2.
Hallo,
I use this. http://forum.xda-developers.com/showthread.php?t=542482
May be it works with WM 6.5 as well
Regards
kengkaj.s said:
Many thanks. But I did not use HDTweak AutoLock option because of that very issue .
Don't understand why MS doesn't implement this simple functionality.
Click to expand...
Click to collapse
Its not the best solution, but a way round this is to stop your phone light going to dim in the power settings. Just have the screen turn off after 2 mins or so instead. This way the screen never goes dim therfore never stays dim!
Use this app. It overcomes the dim light issue. First go back to HD Tweak and DISABLE the lock on screen dim.
Install the cab and then go to Settings\System\Smartlock and tick the Dim lock or Suspend lock options. The screen will then autolock on dim or on pressing power and there are no problems with the light on unlocking.
Thanks everybody. I'll try.
ClydeB1 said:
Use this app. It overcomes the dim light issue. First go back to HD Tweak and DISABLE the lock on screen dim.
Install the cab and then go to Settings\System\Smartlock and tick the Dim lock or Suspend lock options. The screen will then autolock on dim or on pressing power and there are no problems with the light on unlocking.
Click to expand...
Click to collapse
Unfortunately the Incall lock (presuming it is for incoming calls, because there is Outcall lock that should be for outgoing calls) does not work. The hardware buttons still answer/reject the calls which can be a problem while pulling the phone out of the pouch .
tkolev said:
Unfortunately the Incall lock (presuming it is for incoming calls, because there is Outcall lock that should be for outgoing calls) does not work. The hardware buttons still answer/reject the calls which can be a problem while pulling the phone out of the pouch .
Click to expand...
Click to collapse
Take a look here:
http://forum.xda-developers.com/showthread.php?t=556801
Have a look at phonealarm
http://www.pocketmax.net/phoneAlarm.html
For me, it handles locking and unlocking, supporting the stylus, profiles, location based functions and many more.
Another alternative is S2U2
http://www.ac-s2.com/
Related
Is there a program that would automatically lock the keypad after an amount of time?
i use slide2unlock, it come on and locks screen and keypad when the backlight dims
its the only app i was able to find that would do it and not need a password to unlock (the standard wm6 lock screen can be set to come on after a time, but only when you set a password or PIN)
DeviceLock works (well, kinda). I have it set to a hardway button to suspend the device and lock. Works like a charm.
jamesus said:
DeviceLock works (well, kinda). I have it set to a hardway button to suspend the device and lock. Works like a charm.
Click to expand...
Click to collapse
how about unlock? one button operation also?
I've actually switched to the new S2U2 from A_C...memory footprint is much smaller and manageable...
but...I had easy unlock enabled so i just clicked unlock and it would open the phone.
Is there a working version for a Device Lock for my beloved HD? I want my HD to be locked when a notification pops up or a phone call comes in. Actually its unlocked after a call or notification.....
Candy-men said:
Is there a working version for a Device Lock for my beloved HD? I want my HD to be locked when a notification pops up or a phone call comes in. Actually its unlocked after a call or notification.....
Click to expand...
Click to collapse
try S2u2.
Do a search - there are a few similar discussions!
i like the pocket shield on my touch hd -> http://pocketshield.netserver01.com/
I´ve tried S2U2 on my Wizard with some strange problems like Battery drain etc. Pocketshield works so far, but i loved the simplyness of DeviceLock.
Isn´t there any way to lock the device on wake up? Pocketshield shouldn´t be the last fix for this problem....
PocketShield is the best for the HD.
arturobandini said:
PocketShield is the best for the HD.
Click to expand...
Click to collapse
What version?
I´ve tryed aout Phoneshield, but i wasn´t that surprised of it. Now i´ve tryed This:
Goto registry:
HKEY_CurrentUser\ControlPanel\Backlight\[AutoDeviceLockEnable set to 1]
HKEY_CurrentUser\ControlPanel\Backlight\LockLevel\[LockLevel set to 1]
That works for me without installing any Software
Candy-men said:
I´ve tryed aout Phoneshield, but i wasn´t that surprised of it. Now i´ve tryed This:
Goto registry:
HKEY_CurrentUser\ControlPanel\Backlight\[AutoDeviceLockEnable set to 1]
HKEY_CurrentUser\ControlPanel\Backlight\LockLevel\[LockLevel set to 1]
That works for me without installing any Software
Click to expand...
Click to collapse
however doing this modification at registry can I answer to a call sliding to green the on screen indicator?
or am I forced to press phisical anser button?
The Modification doesn´t change the behaviour of the answer screen....
So it works perfectly for me.....
and after....
Candy-men said:
The Modification doesn´t change the behaviour of the answer screen....
So it works perfectly for me.....
Click to expand...
Click to collapse
and after how many time lock the device and can i eventually change (30 60)
thank'you
Candy-men said:
The Modification doesn´t change the behaviour of the answer screen....
So it works perfectly for me.....
Click to expand...
Click to collapse
ah that's fine thx
I would to know one thing, I see two different key to lock the phone:
AutoDeviceLockEnable
LockLevel
why? isn't enough only one of them? for example backlight lockenable?
pls explain to me what exactly these 2 keys so
quick question :
which registry entry governs the backlight display on the lock screen,
at the moment i've got the phone dimming after 30 seconds, then it locks and the light comes back on. for about 30 seconds. ideal the lock screen would be illuminated for about 10 seconds then blank the screen.
What reg entries do i need to set to sort this out ?
answers appreciated.
many thanks.
Hi,
HTC End Key is included, hold End Key 3 seconds an device locked.
wfg
starbase64
Candy-men said:
I´ve tried S2U2 on my Wizard with some strange problems like Battery drain etc. Pocketshield works so far, but i loved the simplyness of DeviceLock.
Isn´t there any way to lock the device on wake up? Pocketshield shouldn´t be the last fix for this problem....
Click to expand...
Click to collapse
am I missing a trick here, doesn't pressing the 'end call' button lock your phone with out the need to install extra software ????
Jezwick said:
am I missing a trick here, doesn't pressing the 'end call' button lock your phone with out the need to install extra software ????
Click to expand...
Click to collapse
by default yes, but you can amend the function of the long key press if you like via the buttons menu in further options.
i've got mine killing off connections data/phone, for example with the power button at the top locking the phone.
works for me.
Hi!
I'm still struggeling to find the right way to lock the phone. The ideal solution would be to:
1) Have the phone unlocked when I switch it on with the Power button (so that I can immediately use it after deliberately turning it on)
2) Have the phone automatically locked when it wakes up due to a phone call or SMS (so that I don't press anything by accident when it is in my pocket).
This seems to be the only really logical way to use device lock. Can this be done?
Regards!
But PocketShield doesn not meet my requirements (see above post). It's just another regular device lock app without the possibility to disable the device lock when the unit is turned on with the power button.
Regards!
I found the Registry-Hack Solution is the better way, just my opinion. But can somebody tell me which reg-value must be edited to avoid locking with end-call button? I don´t want to lock my device in this way, i want to end Data connections with long pressed end-key.
easy
1) scroll along to settings
2) hit 'all settings'
3) select 'personal' tab
4) select 'buttons' icon (top left)
5) get your stylus out
6) on the buttons screen, hit the arrow on the bottom right until you can see the "end key" section. hit that.
7) in the options listed, select "automatically execute selected action" and underneath this select " terminate data connection"
8) hit the OK button (top right) and bob your dads brother, you can now terminate data calls via the long press call cancel key.
nice one.
Thx for that.....
Hi all,
Do you know how to auto lock wm6.5 when you turn off the mobile? I speak about the "standard" lock screen not a software like S2U2.
Thanks in advance for the tweak.
Regards, Sylvain.
you can use smartlock : http://forum.xda-developers.com/showthread.php?t=505032
Or you can just check the Auto Lock in the Lock Settings. Then every time you boot the phone, turn on the screen, etc... it will prompt for your 4 digit pin and slide to unlock.
player911 said:
Or you can just check the Auto Lock in the Lock Settings. Then every time you boot the phone, turn on the screen, etc... it will prompt for your 4 digit pin and slide to unlock.
Click to expand...
Click to collapse
Hi,
Thanks for your answer but I would like to lock the phone without a digit pin. I don't know if there is a registry key for that or something I can change with Advanced Configuration Tools, HTCPedia, HD Tweak...
I'm sure I have seen an old post with this kind of trick but I can't find it that's why I need your help.
If you have another idea...
Thanks
vinsyl said:
Hi,
Thanks for your answer but I would like to lock the phone without a digit pin. I don't know if there is a registry key for that or something I can change with Advanced Configuration Tools, HTCPedia, HD Tweak...
I'm sure I have seen an old post with this kind of trick but I can't find it that's why I need your help.
If you have another idea...
Thanks
Click to expand...
Click to collapse
http://thewingster.com/autolockscreen.aspx
Does exactly what you want! Remember to configure it after installing, under Start - Settings - System - Smart Lock.
You can"t do it by changing a registry key. A light application to auto-lock is LockDevice, link (and other applications links) here : http://forum.xda-developers.com/showthread.php?t=550973
or simply use smartlock ... it's the easiest way to lock your device
I realise that this might not help you but, if you hold down the hang up button for 1 sec another menu appears and you can press lock. it also has other functions on the menu like cancelling data connections turning flight mode on etc.
hello all...i had a quick question regarding throttle lock...the reason im using it is as an alternative to s2u2 bc that is a battery hog on my tp2...i was wondering if anyone knows through experience whether or not throttlelock will consume less battery power...also, is there a way to get it to lock whenever u put the phone into "sleep" mode (pressing the top power button to shut off the screen)...thats really the only thing i want to use it for...for example, when i press the top power button and the screen goes off, how do i get throttlelock to be whats on the screen when i "wake" the phone back up...it seems to me that the only options are to have it activate once u restart (power off and on) the phone or by pressing the throttle lock icon...i would find it very more useful if u could use it like s2u2 (turn screen off and tada!!! theres throttlelock)...can anyone help???
try smartlock. It works with the 6.5 lock and adds the functionality of locking when the phone is powered down. Search for the cab and there are instructions on what box to check to get that functionality.
will smartlock work with 6.1?
I tried s2u2 and also found that it seemed to use more power (based on readings from Homescreen++). Using throttlelock doesn't seem to have much noticable increase at all.
As for getting it to lock when you turn the screen off and wake try the following ...
Go into settings > Lock > Change 'idle time before lock' to '1' then click ok to save settings. Then exit the config go back in and change this back to '0' and 'ok'/save.
It works on my xperia as your wanting ... e.g, turn off screen using button on top, turn on and I need to enter the sequence to activate. I can't find the thread that I read the above solution on at the moment but if your struggling I will see if i can find it.
Throttlelock seems to be ok for me. It does not take much RAM, and does not consume that much power. I do have the lock thing to 0, and throttle lock comes up whenever i turn the phone on.
I used to use smartlock, but for some reason it doesnt work on the build i have!
sillysquid said:
I tried s2u2 and also found that it seemed to use more power (based on readings from Homescreen++). Using throttlelock doesn't seem to have much noticable increase at all.
As for getting it to lock when you turn the screen off and wake try the following ...
Go into settings > Lock > Change 'idle time before lock' to '1' then click ok to save settings. Then exit the config go back in and change this back to '0' and 'ok'/save.
It works on my xperia as your wanting ... e.g, turn off screen using button on top, turn on and I need to enter the sequence to activate. I can't find the thread that I read the above solution on at the moment but if your struggling I will see if i can find it.
Click to expand...
Click to collapse
well, i appreciate the help but unfortuantely that method, nor anything else i do makes it work like i want it to...any other options?
do you have to disable the pin lock before using throttlelock? i currently have to enter a pin and dont know how to disable it
mwrood said:
well, i appreciate the help but unfortuantely that method, nor anything else i do makes it work like i want it to...any other options?
Click to expand...
Click to collapse
I realise this is probably a daft suggestion but you do have autolock switch in the config?
Are you using 0.7?
Heres a link to the Throttlelock website wiki explaining the functions.
Might be of some help.
I'm having some trouble with the incoming call feature but apart from that it seems pretty stable.
I've tried the other options but the pattern unlock does it for me
judicious said:
do you have to disable the pin lock before using throttlelock? i currently have to enter a pin and dont know how to disable it
Click to expand...
Click to collapse
Do you mean the sim pinlock?
On mine the simlock asks for the password when i start up and i use throttlelock as a general screenlock.
sillysquid said:
Do you mean the sim pinlock?
On mine the simlock asks for the password when i start up and i use throttlelock as a general screenlock.
Click to expand...
Click to collapse
it's the pin lock for the whole because i use exchange mail, it's a security pin that everytime the phone goes to sleep, i have to enter it in. i did find a fix for this, it's in the reg file.
I seem to have a problem with the locking screen. I installed the official ROM for WM6.5 and when i lock my device i get the ugly Gray screen with Gray button telling me 'Push to unlock'
I thought that WM6.5 by default had an unlocking screen with a slider of some sort. Any ideas?
Grtz
You got the TD2 Tools? With this program you can enable the unlock screen of Windows Mobile 6.5
Maybe this helps?
Yes I installed that, but i see no option to enable the WM6.5 locking screen.
Sorry, my fault... it's a tool called DiamondTweak
in this tool you can activate the lock screen
Sorry, may I know if this screen is automatic lockup after a prefinded idle time? And does it require a password to unlock? I see a similar function in control panel, can set time, but need a password.
mobilio said:
Sorry, may I know if this screen is automatic lockup after a prefinded idle time? And does it require a password to unlock? I see a similar function in control panel, can set time, but need a password.
Click to expand...
Click to collapse
you can edit registry
HKCU\controlpanel\backlight\autodevicelockenable form 0 to 1
remember to soft reset
mobilio said:
Sorry, may I know if this screen is automatic lockup after a prefinded idle time? And does it require a password to unlock? I see a similar function in control panel, can set time, but need a password.
Click to expand...
Click to collapse
It locks the screen after some time, when you did nothing with your mobile! It does not require any password for unlock!
The function in the control panel is to prevent other persons to do something on your device after the time you can choose! The password you need there is the one, that you want it to be!
Have you tried
Settings--->lock---> display ---> Windows default / classic.
YOu will need to soft reset after change